- 08 Feb, 2017 3 commits
-
-
Marcelo Tosatti authored
Add a driver with gettime method returning hosts realtime clock. This allows Chrony to synchronize host and guest clocks with high precision (see results below). chronyc> sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== To configure Chronyd to use PHC refclock, add the following line to its configuration file: refclock PHC /dev/ptpX poll 3 dpoll -2 offset 0 Where /dev/ptpX is the kvmclock PTP clock. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Marcelo Tosatti authored
To be used by KVM PTP driver. Signed-off-by:
-
Paolo Bonzini authored
Fix rebase breakage from commit 55dd00a7 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall", 2017-01-24), courtesy of the "I could have sworn I had pushed the right branch" department. Signed-off-by:
-
- 07 Feb, 2017 6 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and features for 4.11 (via kvm/next) - enable some simd extensions for guests - enable nx for guests - debug log for cpu model - PER fixes - remove bitwise annotation from ar_t - detect guests in operation exception program check loops - fix potential null-pointer dereference for ucontrol guests - also contains merge for fix that went into 4.10 to avoid conflicts
-
Paolo Bonzini authored
Merge tag 'kvm_mips_4.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/kvm-mips into HEAD KVM: MIPS: GVA/GPA page tables, dirty logging, SYNC_MMU etc Numerous MIPS KVM fixes, improvements, and features for 4.11, many of which continue to pave the way for VZ support, the most interesting of which are: - Add GVA->HPA page tables for T&E, to cache GVA mappings. - Generate fast-path TLB refill exception handler which loads host TLB entries from GVA page table, avoiding repeated guest memory translation and guest TLB lookups. - Use uaccess macros when T&E needs to access guest memory, which with GVA page tables and the Linux TLB refill handler improves robustness against TLB faults and fixes EVA hosts. - Use BadInstr/BadInstrP registers when available to obtain instruction encodings after a synchronous trap. - Add GPA->HPA page tables to replace the inflexible linear array, allowing for multiple sparsely arranged memory regions. - Properly implement dirty page logging. - Add KVM_CAP_SYNC_MMU support so that changes in GPA mappings become effective in guests even if they are already running, allowing for copy-on-write, KSM, idle page tracking, swapping, and guest memory ballooning. - Add KVM_CAP_READONLY_MEM support, so writes to specified memory regions are treated as MMIO. - Implement proper CP0_EBase support in T&E. - Expose a few more missing CP0 registers to userland. - Add KVM_CAP_NR_VCPUS and KVM_CAP_MAX_VCPUS support, and allow up to 8 VCPUs to be created in a VM. - Various cleanups and dropping of dead and duplicated code.
-
Paolo Bonzini authored
Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD The big feature this time is support for POWER9 using the radix-tree MMU for host and guest. This required some changes to arch/powerpc code, so I talked with Michael Ellerman and he created a topic branch with this patchset, which I merged into kvm-ppc-next and which Michael will pull into his tree. Michael also put in some patches from Nick Piggin which fix bugs in the interrupt vector code in relocatable kernels when coming from a KVM guest. Other notable changes include: * Add the ability to change the size of the hashed page table, from David Gibson. * XICS (interrupt controller) emulation fixes and improvements, from Li Zhong. * Bug fixes from myself and Thomas Huth. These patches define some new KVM capabilities and ioctls, but there should be no conflicts with anything else currently upstream, as far as I am aware.
-
Marcelo Tosatti authored
Add a hypercall to retrieve the host realtime clock and the TSC value used to calculate that clock read. Used to implement clock synchronization between host and guest. Signed-off-by:
-
David Hildenbrand authored
vmx_complete_nested_posted_interrupt() can't fail, let's turn it into a void function. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
David Hildenbrand authored
kmap() can't fail, therefore it will always return a valid pointer. Let's just get rid of the unnecessary checks. Signed-off-by:
-
- 06 Feb, 2017 2 commits
-
-
Christian Borntraeger authored
Sometimes (e.g. early boot) a guest is broken in such ways that it loops 100% delivering operation exceptions (illegal operation) but the pgm new PSW is not set properly. This will result in code being read from address zero, which usually contains another illegal op. Let's detect this case and return to userspace. Instead of only detecting this for address zero apply a heuristic that will work for any program check new psw. We do not want guest problem state to be able to trigger a guest panic, e.g. by faulting on an address that is the same as the program check new PSW, so we check for the problem state bit being off. With proper handling in userspace we a: get rid of CPU consumption of such broken guests b: keep the program old PSW. This allows to find out the original illegal operation - making debugging such early boot issues much easier than with single stepping Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com>
-
Janosch Frank authored
User controlled KVM guests do not support the dirty log, as they have no single gmap that we can check for changes. As they have no single gmap, kvm->arch.gmap is NULL and all further referencing to it for dirty checking will result in a NULL dereference. Let's return -EINVAL if a caller tries to sync dirty logs for a UCONTROL guest. Fixes: 15f36ebd ("KVM: s390: Add proper dirty bitmap support to S390 kvm.") Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reported-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by:
-
- 03 Feb, 2017 29 commits
-
-
James Hogan authored
Increase the maximum number of MIPS KVM VCPUs to 8, and implement the KVM_CAP_NR_VCPUS and KVM_CAP_MAX_CPUS capabilities which expose the recommended and maximum number of VCPUs to userland. The previous maximum of 1 didn't allow for any form of SMP guests. We calculate the values similarly to ARM, recommending as many VCPUs as there are CPUs online in the system. This will allow userland to know how many VCPUs it is possible to create. Signed-off-by:James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
-
James Hogan authored
Expose the CP0_IntCtl register through the KVM register access API, which is a required register since MIPS32r2. It is currently read-only since the VS field isn't implemented due to lack of Config3.VInt or Config3.VEIC. It is implemented in trap_emul.c so that a VZ implementation can allow writes. Signed-off-by: -
James Hogan authored
Expose the CP0_EntryLo0 and CP0_EntryLo1 registers through the KVM register access API. This is fairly straightforward for trap & emulate since we don't support the RI and XI bits. For the sake of future proofing (particularly for VZ) it is explicitly specified that the API always exposes the 64-bit version of these registers (i.e. with the RI and XI bits in bit positions 63 and 62 respectively), and they are implemented in trap_emul.c rather than mips.c to allow them to be implemented differently for VZ. Signed-off-by: -
James Hogan authored
Set the default VCPU state closer to the architectural reset state, with PC pointing at the reset vector (uncached PA 0x1fc00000, which for KVM T&E is VA 0x5fc00000), and with CP0_Status.BEV and CP0_Status.ERL to 1. Although QEMU at least will overwrite this state, it makes sense to do this now that CP0_EBase is properly implemented to check BEV, and now that we support a sparse GPA layout potentially with a boot ROM at GPA 0x1fc00000. Signed-off-by: -
James Hogan authored
The CP0_EBase register is a standard feature of MIPS32r2, so we should always have been implementing it properly. However the register value was ignored and wasn't exposed to userland. Fix the emulation of exceptions and interrupts to use the value stored in guest CP0_EBase, and fix the masks so that the top 3 bits (rather than the standard 2) are fixed, so that it is always in the guest KSeg0 segment. Also add CP0_EBASE to the KVM one_reg interface so it can be accessed by userland, also allowing the CPU number field to be written (which isn't permitted by the guest). Signed-off-by: -
James Hogan authored
Access to various CP0 registers via the KVM register access API needs to be implementation specific to allow restrictions to be made on changes, for example when VZ guest registers aren't present, so move them all into trap_emul.c in preparation for VZ. Signed-off-by: -
James Hogan authored
Now that load/store faults due to read only memory regions are treated as MMIO accesses it is safe to claim support for read only memory regions (KVM_CAP_READONLY_MEM). Signed-off-by: -
James Hogan authored
Implement the SYNC_MMU capability for KVM MIPS, allowing changes in the underlying user host virtual address (HVA) mappings to be promptly reflected in the corresponding guest physical address (GPA) mappings. This allows for several features to work with guest RAM which require mappings to be altered or protected, such as copy-on-write, KSM (Kernel Samepage Merging), idle page tracking, memory swapping, and guest memory ballooning. There are two main aspects of this change, described below. The KVM MMU notifier architecture callbacks are implemented so we can be notified of changes in the HVA mappings. These arrange for the guest physical address (GPA) page tables to be modified and possibly for derived mappings (GVA page tables and TLBs) to be flushed. - kvm_unmap_hva[_range]() - These deal with HVA mappings being removed, for example before a copy-on-write takes place, which requires the corresponding GPA page table mappings to be removed too. - kvm_set_spte_hva() - These update a GPA page table entry to match the new HVA entry, but must be careful to respect KVM specific configuration such as not dirtying a clean guest page which is dirty to the host, and write protecting writable pages in read only memslots (which will soon be supported). - kvm[_test]_age_hva() - These update GPA page table entries to be old (invalid) so that access can be tracked, making them young again. The GPA page fault handling (kvm_mips_map_page) is updated to use gfn_to_pfn_prot() (which may provide read-only pages), to handle asynchronous page table invalidation from MMU notifier callbacks, and to handle more cases in the fast path. - mmu_notifier_seq is used to detect asynchronous page table invalidations while we're holding a pfn from gfn_to_pfn_prot() outside of kvm->mmu_lock, retrying if invalidations have taken place, e.g. a COW or a KSM page merge. - The fast path (_kvm_mips_map_page_fast) now handles marking old pages as young / accessed, and disallowing dirtying of clean pages that aren't actually writable (e.g. shared pages that should COW, and read-only memory regions when they are enabled in a future patch). - Due to the use of MMU notifications we no longer need to keep the page references after we've updated the GPA page tables. Signed-off-by: -
James Hogan authored
Propagate the GPA PTE protection bits on to the GVA PTEs on a mapped fault (except _PAGE_WRITE, and filtered by the guest TLB entry), rather than always overriding the protection. This allows dirty page tracking to work in mapped guest segments as a clear dirty bit in the GPA PTE will propagate to the GVA PTEs even when the guest TLB has the dirty bit set. Since the filtering of protection bits is now abstracted, if the buddy GVA PTE is also valid, we obtain the corresponding GPA PTE using a simple non-allocating walk and load that into the GVA PTE similarly (which may itself be invalid). Signed-off-by: -
James Hogan authored
Propagate the GPA PTE protection bits on to the GVA PTEs on a KSeg0 fault (except _PAGE_WRITE), rather than always overriding the protection. This allows dirty page tracking to work in KSeg0 as a clear dirty bit in the GPA PTE will propagate to the GVA PTEs. This makes it simpler to use a single kvm_mips_map_page() to obtain both the main GPA PTE and its buddy (which may be invalid), which also allows memory regions to be fully accessible when they don't start and end on a 2*PAGE_SIZE boundary. Signed-off-by: -
James Hogan authored
Update kvm_mips_map_page() to handle logging of dirty guest physical pages. Upcoming patches will propagate the dirty bit to the GVA page tables. A fast path is added for handling protection bits that can be resolved without calling into KVM, currently just dirtying of clean pages being written to. The slow path marks the GPA page table entry writable only on writes, and at the same time marks the page dirty in the dirty page logging bitmask. Signed-off-by: -
James Hogan authored
When an existing memory region has dirty page logging enabled, make the entire slot clean (read only) so that writes will immediately start logging dirty pages (once the dirty bit is transferred from GPA to GVA page tables in an upcoming patch). Signed-off-by: -
James Hogan authored
MIPS hasn't up to this point properly supported dirty page logging, as pages in slots with dirty logging enabled aren't made clean, and tlbmod exceptions from writes to clean pages have been assumed to be due to guest TLB protection and unconditionally passed to the guest. Use the generic dirty logging helper kvm_get_dirty_log_protect() to properly implement kvm_vm_ioctl_get_dirty_log(), similar to how ARM does. This uses xchg to clear the dirty bits when reading them, rather than wiping them out afterwards with a memset, which would potentially wipe recently set bits that weren't caught by kvm_get_dirty_log(). It also makes the pages clean again using the kvm_arch_mmu_enable_log_dirty_pt_masked() architecture callback so that further writes after the shadow memslot is flushed will trigger tlbmod exceptions and dirty handling. Signed-off-by: -
James Hogan authored
Add a helper function to make a range of guest physical address (GPA) mappings in the GPA page table clean so that writes can be caught. This will be used in a few places to manage dirty page logging. Note that until the dirty bit is transferred from GPA page table entries to GVA page table entries in an upcoming patch this won't trigger a TLB modified exception on write. Signed-off-by: -
James Hogan authored
Rewrite TLB modified exception handling to handle read only GPA memory regions, instead of unconditionally passing the exception to the guest. If the guest TLB is not the cause of the exception we call into the normal TLB fault handling depending on the memory segment, which will soon attempt to remap the physical page to be writable (handling dirty page tracking or copy on write in the process). Failing that we fall back to treating it as MMIO, due to a read only memory region. Once the capability is enabled, this will allow read only memory regions (such as the Malta boot flash as emulated by QEMU) to have writes treated as MMIO, while still allowing reads to run untrapped. Signed-off-by: -
James Hogan authored
Treat unhandled accesses to guest KSeg0 as MMIO, rather than only host KSeg0 addresses. This will allow read only memory regions (such as the Malta boot flash as emulated by QEMU) to have writes (before reads) treated as MMIO, and unallocated physical addresses to have all accesses treated as MMIO. The MMIO emulation uses the gva_to_gpa callback, so this is also updated for trap & emulate to handle guest KSeg0 addresses. Signed-off-by: -
James Hogan authored
Abstract the handling of bad guest loads and stores which may need to trigger an MMIO, so that the same code can be used in a later patch for guest KSeg0 addresses (TLB exception handling) as well as for host KSeg1 addresses (existing address error exception and TLB exception handling). We now use kvm_mips_emulate_store() and kvm_mips_emulate_load() directly rather than the more generic kvm_mips_emulate_inst(), as there is no need to expose emulation of any other instructions. Signed-off-by: -
James Hogan authored
kvm_mips_map_page() will need to know whether the fault was due to a read or a write in order to support dirty page tracking, KVM_CAP_SYNC_MMU, and read only memory regions, so get that information passed down to it via new bool write_fault arguments to various functions. Signed-off-by: -
James Hogan authored
Ignore userland writes to CP0_Config7 rather than reporting an error, since we do allow reads of this register and it is claimed to exist in the ioctl API. This allows userland to blindly save and restore KVM registers without having to special case certain registers as not being writable, for example during live migration once dirty page logging is fixed. Signed-off-by: -
James Hogan authored
Implement the kvm_arch_flush_shadow_all() and kvm_arch_flush_shadow_memslot() KVM functions for MIPS to allow guest physical mappings to be safely changed. The general MIPS KVM code takes care of flushing of GPA page table entries. kvm_arch_flush_shadow_all() flushes the whole GPA page table, and is always called on the cleanup path so there is no need to acquire the kvm->mmu_lock. kvm_arch_flush_shadow_memslot() flushes only the range of mappings in the GPA page table corresponding to the slot being flushed, and happens when memory regions are moved or deleted. MIPS KVM implementation callbacks are added for handling the implementation specific flushing of mappings derived from the GPA page tables. These are implemented for trap_emul.c using kvm_flush_remote_tlbs() which should now be functional, and will flush the per-VCPU GVA page tables and ASIDS synchronously (before next entering guest mode or directly accessing GVA space). Signed-off-by: -
James Hogan authored
Use the lockless GVA helpers to implement the reading of guest instructions for emulation. This will allow it to handle asynchronous TLB flushes when they are implemented. This is a little more complicated than the other two cases (get_inst() and dynamic translation) due to the need to emulate the appropriate guest TLB exception when the address isn't present or isn't valid in the guest TLB. Since there are several protected cache ops that may need to be performed safely, this is abstracted by kvm_mips_guest_cache_op() which is passed a protected cache op function pointer and takes care of the lockless operation and fault handling / retry if the op should fail, taking advantage of the new errors which the protected cache ops can now return. This allows the existing advance fault handling which relied on host TLB lookups to be removed, along with the now unused kvm_mips_host_tlb_lookup(), Signed-off-by: -
James Hogan authored
Use the lockless GVA helpers to implement the reading of guest instructions for emulation. This will allow it to handle asynchronous TLB flushes when they are implemented. Signed-off-by: -
James Hogan authored
Use the lockless GVA helpers to implement the dynamic translation of guest instructions. This will allow it to handle asynchronous TLB flushes when they are implemented. Signed-off-by: -
James Hogan authored
Add helpers to allow for lockless direct access to the GVA space, by changing the VCPU mode to READING_SHADOW_PAGE_TABLES for the duration of the access. This allows asynchronous TLB flush requests in future patches to safely trigger either a TLB flush before the direct GVA space access, or a delay until the in-progress lockless direct access is complete. The kvm_trap_emul_gva_lockless_begin() and kvm_trap_emul_gva_lockless_end() helpers take care of guarding the direct GVA accesses, and kvm_trap_emul_gva_fault() tries to handle a uaccess fault resulting from a flush having taken place. Signed-off-by: -
James Hogan authored
The stale ASID checks taking place on VCPU load can be reduced: - Now that we check for a stale ASID on guest re-entry, there is no need to do so when loading the VCPU outside of guest context, since it will happen before entering the guest. Note that a lot of KVM VCPU ioctls will cause the VCPU to be loaded but guest context won't be entered. - There is no need to check for a stale kernel_mm ASID when the guest is in user mode and vice versa. In fact doing so can potentially be problematic since the user_mm ASID regeneration may trigger a new ASID cycle, which would cause the kern_mm ASID to become stale after it has been checked for staleness. Therefore only check the ASID for the mm corresponding to the current guest mode, and only if we're already in guest context. We drop some of the related kvm_debug() calls here too. Signed-off-by: -
James Hogan authored
Add handling of TLB invalidation requests before entering guest mode. This will allow asynchonous invalidation of the VCPU mappings when physical memory regions are altered. Should the CPU running the VCPU already be in guest mode an IPI will be sent to trigger a guest exit. The reload_asid path will be used in a future patch for when GVA is about to be directly accessed by KVM. In the process, the stale user ASID check in the re-entry path (for lazy user GVA flushing) is generalised to check the ASID for the current guest mode, in case a TLB invalidation request was handled. This has the side effect of making the ASID checks on vcpu_load too conservative, which will be addressed in a later patch. Signed-off-by: -
James Hogan authored
Keep the vcpu->mode and vcpu->cpu variables up to date so that kvm_make_all_cpus_request() has a chance of functioning correctly. This will soon need to be used for kvm_flush_remote_tlbs(). We can easily update vcpu->cpu when the VCPU context is loaded or saved, which will happen when accessing guest context and when the guest is scheduled in and out. We need to be a little careful with vcpu->mode though, as we will in future be checking for outstanding VCPU requests, and this must be done after the value of IN_GUEST_MODE in vcpu->mode is visible to other CPUs. Otherwise the other CPU could fail to trigger an IPI to wait for completion dispite the VCPU request not being seen. Signed-off-by: -
James Hogan authored
Current guest physical memory is mapped to host physical addresses using a single linear array (guest_pmap of length guest_pmap_npages). This was only really meant to be temporary, and isn't sparse, so its wasteful of memory. A small amount of RAM at GPA 0 and a small boot exception vector at GPA 0x1fc00000 cannot be represented without a full 128KiB guest_pmap allocation (MIPS32 with 16KiB pages), which is one reason why QEMU currently runs its boot code at the top of RAM instead of the usual boot exception vector address. Instead use the existing infrastructure for host virtual page table management to allocate a page table for guest physical memory too. This should be sufficient for now, assuming the size of physical memory doesn't exceed the size of virtual memory. It may need extending in future to handle XPA (eXtended Physical Addressing) in 32-bit guests, as supported by VZ guests on P5600. Some of this code is based loosely on Cavium's VZ KVM implementation. Signed-off-by: -
James Hogan authored
When exiting from the guest, store the values of the CP0_BadInstr and CP0_BadInstrP registers if they exist, which contain the encodings of the instructions which caused the last synchronous exception. When the instruction is needed for emulation, kvm_get_badinstr() and kvm_get_badinstrp() are used instead of calling kvm_get_inst() directly, to decide whether to read the saved CP0_BadInstr/CP0_BadInstrP registers (if they exist), or read the instruction from memory (if not). The use of these registers should be more robust than using kvm_get_inst(), as it actually gives the instruction encoding seen by the hardware rather than relying on user accessors after the fact, which can be fooled by incoherent icache or a racing code modification. It will also work with VZ, where the guest virtual memory isn't directly accessible by the host with user accessors. Signed-off-by:
-
