- 19 Aug, 2020 40 commits
-
-
Tom Rix authored
[ Upstream commit 02cd2d31 ] clang static analysis flags this error sil-sii8620.c:184:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'. So initialize ret. Fixes: ce6e153f ("drm/bridge: add Silicon Image SiI8620 driver") Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200712152453.27510-1-trix@redhat.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit dcbabfeb ] PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY. Fixes: d8c80bb3 ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200708133800.3336-1-m.szyprowski@samsung.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit a6ae2fe5 ] The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd015002 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 302a085c ] Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon system suspend. led_set_brightness_nopm() uses schedule_work() to set LED brightness. However, there's no guarantee that the scheduled work gets executed because no one flushes the work. So flush the scheduled work to make sure LED gets turned off. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Fixes: 81fe8e5b ("leds: core: Add led_set_brightness_nosleep{nopm} functions") Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 2a7e32d0 ] The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset. Previously we used these operations on pci_cfg_wait: __add_wait_queue(&pci_cfg_wait, ...) __remove_wait_queue(&pci_cfg_wait, ...) wake_up_all(&pci_cfg_wait) The wake_up acquires the wait queue lock, but the add and remove do not. Originally these were all protected by the pci_lock, but cdcb33f9 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing: Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000 Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion. Fixes: cdcb33f9 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock") Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/Based-on-patch-by:
Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
-
Zhu Yanjun authored
[ Upstream commit 5c99274b ] In the loopback tests, the following call trace occurs. Call Trace: __rxe_do_task+0x1a/0x30 [rdma_rxe] rxe_qp_destroy+0x61/0xa0 [rdma_rxe] rxe_destroy_qp+0x20/0x60 [rdma_rxe] ib_destroy_qp_user+0xcc/0x220 [ib_core] uverbs_free_qp+0x3c/0xc0 [ib_uverbs] destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs] uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs] uobj_destroy+0x41/0x70 [ib_uverbs] __uobj_get_destroy+0x39/0x70 [ib_uverbs] ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs] The root cause is that the actual RDMA connection is not created in the loopback tests and the rxe_match_dgid will fail randomly. To fix this call trace which appear in the loopback tests, skip check of the dgid. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200630123605.446959-1-leon@kernel.orgSigned-off-by:
Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 83895227 ] Quota reservations are supposed to account for the blocks that might be allocated due to a bmap btree split. Reflink doesn't do this, so fix this to make the quota accounting more accurate before we start rearranging things. Fixes: 862bb360 ("xfs: reflink extents from one file to another") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit eb0efe50 ] The data fork scrubber calls filemap_write_and_wait to flush dirty pages and delalloc reservations out to disk prior to checking the data fork's extent mappings. Unfortunately, this means that scrub can consume the EIO/ENOSPC errors that would otherwise have stayed around in the address space until (we hope) the writer application calls fsync to persist data and collect errors. The end result is that programs that wrote to a file might never see the error code and proceed as if nothing were wrong. xfs_scrub is not in a position to notify file writers about the writeback failure, and it's only here to check metadata, not file contents. Therefore, if writeback fails, we should stuff the error code back into the address space so that an fsync by the writer application can pick that up. Fixes: 99d9d8d0 ("xfs: scrub inode block mappings") Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 18ffec75 ] fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it. Fixes: 4163851f ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2505a210 ] If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So then the "strlen(model_names[i]) <= name_len" is true because strlen() is unsigned and -ENOENT is type promoted to a very high positive value. Then the "strncmp(name, model_names[i], name_len)" uses uninitialized data because "name" is uninitialized. Fixes: 92374e88 ("[media] firedtv: drop obsolete backend abstraction") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit f0a5e4d7 ] YangYuxi is reporting that connection reuse is causing one-second delay when SYN hits existing connection in TIME_WAIT state. Such delay was added to give time to expire both the IPVS connection and the corresponding conntrack. This was considered a rare case at that time but it is causing problem for some environments such as Kubernetes. As nf_conntrack_tcp_packet() can decide to release the conntrack in TIME_WAIT state and to replace it with a fresh NEW conntrack, we can use this to allow rescheduling just by tuning our check: if the conntrack is confirmed we can not schedule it to different real server and the one-second delay still applies but if new conntrack was created, we are free to select new real server without any delays. YangYuxi lists some of the problem reports: - One second connection delay in masquerading mode: https://marc.info/?t=151683118100004&r=1&w=2 - IPVS low throughput #70747 https://github.com/kubernetes/kubernetes/issues/70747 - Apache Bench can fill up ipvs service proxy in seconds #544 https://github.com/cloudnativelabs/kube-router/issues/544 - Additional 1s latency in `host -> service IP -> pod` https://github.com/kubernetes/kubernetes/issues/90854 Fixes: f719e375 ("ipvs: drop first packet to redirect conntrack") Co-developed-by:
YangYuxi <yx.atom1@gmail.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Reviewed-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 86f2da11 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626040553.944352-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit d179f7c7 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626035948.944148-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 7ee78aff ] There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error. Addresses-Coverity: ("Out-of-bounds read/write") Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 85c5cbeb ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Fixes: b087e619 ("cxl: Export optional AFU configuration record in sysfs") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Acked-by:
Andrew Donnellan <ajd@linux.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Link: https://lore.kernel.org/r/20200602120733.5943-1-wanghai38@huawei.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Emil Velikov authored
[ Upstream commit 7a05c3b6 ] The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right. Perhaps some platforms don't distinguish between the two writers? Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Fixes: e8395081 ("drm/dsi: Implement set tear scanline") Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 040ab9c4 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200625204730.943520-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4 ("Linux-2.6.12-rc2") Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 88cee34b ] This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 76016322 ('ASoC: Intel: Add Broxton-P machine driver') Reported-by:
Jaroslav Kysela <perex@perex.cz> Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit dc7690a7 ] preview_init_entities() does not call v4l2_ctrl_handler_free() when it fails. Add the missed function to fix it. Fixes: de1135d4 ("[media] omap3isp: CCDC, preview engine and resizer") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 985b1f59 ] clang points out that doing arithmetic between diffent enums is usually a mistake: drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion] reg_val = pdata->pin_tx2 | pdata->ntc_pin; ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion] reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode; ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ In this driver, it is intentional, so add a cast to hide the false-positive warning. It appears to be the only instance of this warning at the moment. Fixes: b98d13c7 ("leds: Add new LED driver for lm355x chips") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 5f368dde ] Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a long value leads to a potential integer overflow. Fix this by using the BIT macro to perform the shift to avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: ad49f860 ("drm/arm: Add support for Mali Display Processors") Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit f8794fea ] Since commit 65f037e8 ("drm/etnaviv: add support for slave interface clock") the reg clock is enabled before the bus clock and we need to undo its enablement on error. Fixes: 65f037e8 ("drm/etnaviv: add support for slave interface clock") Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Tomasz Duszynski authored
[ Upstream commit df16c33a ] IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting raw concentrations of pollutants. Raw value should be meaningless before being properly scaled. Because of that description shouldn't mention raw value unit whatsoever. Fix this by rephrasing existing description so it follows conventions used throughout IIO ABI docs. Fixes: 8ff6b3bc ("iio: chemical: Add IIO_CONCENTRATION channel type") Signed-off-by:
Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit a738e766 ] ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock is held. Acquire the lock in a couple of error paths when calling that function to ensure this condition is met. Fixes: 6421969f ("ath10k: refactor tx pending management") Fixes: e62ee5c3 ("ath10k: Add support for htt_data_tx_desc_64 descriptor") Signed-off-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeidSigned-off-by:
-
Christophe JAILLET authored
[ Upstream commit 499a2c41 ] 'dma_alloc_coherent()' must be balanced by a call to 'dma_free_coherent()' not 'dma_free_wc()'. The correct dma_free_ function is already used in the error handling path of the probe function. Fixes: 77e19675 ("[ARM] pxafb: allow video memory size to be configurable") Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429084505.108897-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Dejin Zheng authored
[ Upstream commit fd4b8243 ] A call of the function do_take_over_console() can fail here. The corresponding system resources were not released then. Thus add a call of iounmap() and release_mem_region() together with the check of a failure predicate. and also add release_mem_region() on device removal. Fixes: e86bb8ac ("[PATCH] VT binding: Make newport_con support binding") Suggested-by:
Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Dejin Zheng authored
[ Upstream commit 98bd4f72 ] the sfb->fb->screen_base is not save the value get by iounmap() when the chip id is 0x720. so iounmap() for address sfb->fb->screen_base is not right. Fixes: 1461d667 ("staging: sm7xxfb: merge sm712fb with fbdev") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit b975abbd ] In intel_gtt_setup_scratch_page(), pointer "page" is not released if pci_dma_mapping_error() return an error, leading to a memory leak on module initialisation failure. Simply fix this issue by freeing "page" before return. Fixes: 0e87d2b0 ("intel-gtt: initialize our own scratch page") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Rob Clark authored
[ Upstream commit 5e16372b ] This can happen a lot when things go pear shaped. Lets not flood dmesg when this happens. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Erik Kaneda authored
[ Upstream commit 6a54ebae ] ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70 Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects. Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region. This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object. Link: https://github.com/acpica/acpica/commit/e17b28cfSigned-off-by:
Erik Kaneda <erik.kaneda@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Coly Li authored
[ Upstream commit 117f636e ] In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value. But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check, 2156 if (ca->sb.seq > c->sb.seq) { 2157 c->sb.version = ca->sb.version; 2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16); 2159 c->sb.flags = ca->sb.flags; 2160 c->sb.seq = ca->sb.seq; 2161 pr_debug("set version = %llu\n", c->sb.version); 2162 } c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated. The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly. But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered. This patch modifies the if() check to the following way, 2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) { Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jim Cromie authored
[ Upstream commit f678ce8c ] ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead. Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked. Acked-by: <jbaron@akamai.com> Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.comSigned-off-by:
-
Danesh Petigara authored
[ Upstream commit 5fc453d7 ] GISB bus error kernel panics have been observed during S2 transition tests on the 7271t platform. The errors are a result of the BDC interrupt handler trying to access BDC register space after the system's suspend callbacks have completed. Adding a suspend hook to the BDC driver that halts the controller before S2 entry thus preventing unwanted access to the BDC register space during this transition. Signed-off-by:
Danesh Petigara <danesh.petigara@broadcom.com> Signed-off-by:
Al Cooper <alcooperx@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sasi Kumar authored
[ Upstream commit a95bdfd2 ] Multiple connects/disconnects can cause a crash on the second disconnect. The driver had a problem where it would try to send endpoint commands after it was disconnected which is not allowed by the hardware. The fix is to only allow the endpoint commands when the endpoint is connected. This will also fix issues that showed up when using configfs to create gadgets. Signed-off-by:
Sasi Kumar <sasi.kumar@broadcom.com> Signed-off-by:
-
Evgeny Novikov authored
[ Upstream commit 2468c877 ] Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet. The patch fixes the bug like in other similar drivers. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 35681862 ] Once channel's job is hung, it dumps the channel's state into KMSG before tearing down the offending job. If multiple channels hang at once, then they dump messages simultaneously, making the debug info unreadable, and thus, useless. This patch adds mutex which allows only one channel to emit debug messages at a time. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Bolarinwa Olayemi Saheed authored
[ Upstream commit 9018fd7f ] On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x). This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success. Check the return value of pcie_capability_read_dword() to ensure success. Suggested-by:
Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by:
Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by:
-
Wright Feng authored
[ Upstream commit fcdd7a87 ] When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Prasanna Kerekoppa authored
[ Upstream commit fa326654 ] Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by:
Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by:
-
Wright Feng authored
[ Upstream commit eccbf46b ] brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build. Signed-off-by:
-
