- 15 Jul, 2022 21 commits
-
-
Liang He authored
In ksz_switch_register(), we should call of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 912aae27 ("net: dsa: microchip: really look for phy-mode in port nodes") Signed-off-by:
Liang He <windhl@126.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220714153138.375919-1-windhl@126.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Biao Huang says: ==================== stmmac: dwmac-mediatek: fix clock issue changes in v5: 1. add reivewd-by as Matthias's comments. 2. fix "warning: unused variable 'ret' [-Wunused-variable]" as Jakub's comments changes in v4: 1. improve commit message and test ko insertion/remove as Matthias's comments. 2. add patch "net: stmmac: fix pm runtime issue in stmmac_dvr_remove()" to fix vlan filter deletion issue. 3. add patch "net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow" to fix unbalanced ptp clock issue in suspend/resume flow. changes in v3: 1. delete mediatek_dwmac_exit() since there is no operation in it, as Matthias's comments. changes in v2: 1. clock configuration is still needed in probe, and invoke mediatek_dwmac_clks_config() instead. 2. update commit message. v1: remove duplicated clock configuration in init/exit. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Biao Huang authored
Current stmmac driver will prepare/enable ptp_ref clock in stmmac_init_tstamp_counter(). The stmmac_pltfr_noirq_suspend will disable it once in suspend flow. But in resume flow, stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter ptp_ref clock reference counter increases twice, which leads to unbalance ptp clock when resume back. Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it. Fixes: 0735e639 ("net: stmmac: skip only stmmac_ptp_register when resume from suspend") Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
-
Biao Huang authored
If netif is running when stmmac_dvr_remove is invoked, the unregister_netdev will call ndo_stop(stmmac_release) and vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid). Currently, stmmac_dvr_remove() will disable pm runtime before unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked, pm_runtime_resume_and_get in it returns EACCESS error number, and reports: dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0 Move the pm_runtime_disable to the end of stmmac_dvr_remove to fix this issue. Fixes: 64495203 ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()") Signed-off-by:
-
Biao Huang authored
The pm_runtime takes care of the clock handling in current stmmac drivers, and dwmac-mediatek implement the mediatek_dwmac_clks_config() as the callback for pm_runtime. Then, stripping duplicated clocks handling in old init()/exit() to fix clock issue in suspend/resume test. As to clocks in probe/remove, vendor need symmetric handling to ensure clocks balance. Test pass, including suspend/resume and ko insertion/remove. Fixes: 3186bdad ("stmmac: dwmac-mediatek: add platform level clocks management") Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_net_table (Round 2). This series fixes data-races around 15 knobs after ip_default_ttl in ipv4_net_table. These two knobs are skipped. - ip_local_port_range is safe with its own lock. - ip_local_reserved_ports uses proc_do_large_bitmap(), which will need an additional lock and can be fixed later. So, the next round will start with igmp_link_local_mcast_reports. ==================== Signed-off-by: -
Kuniyuki Iwashima authored
While reading sysctl_tcp_probe_interval, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 05cbc0db ("ipv4: Create probe timer for tcp PMTU as per RFC4821") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_probe_threshold, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6b58e0a5 ("ipv4: Use binary search to choose tcp PMTU probe_size") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c04b79b6 ("tcp: add new tcp_mtu_probe_floor sysctl") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_min_snd_mss, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5f3e2bf0 ("tcp: add tcp_min_snd_mss sysctl") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_base_mss, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5d424d5a ("[TCP]: MTU probing") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_mtu_probing, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5d424d5a ("[TCP]: MTU probing") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 6dd9a14e ("net: Allow accepted sockets to be bound to l3mdev domain") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_fwmark_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 84f39b08 ("net: support marking accepting TCP sockets") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_fwmark_reflect, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_autobind_reuse, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 4b01a967 ("tcp: bind(0) remove the SO_REUSEADDR restriction when ephemeral ports are exhausted.") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_nonlocal_bind, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_fwd_update_priority, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 432e05d3 ("net: ipv4: Control SKB reprioritization after forwarding") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f87c10a8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_no_pmtu_disc, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_default_ttl, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
- 14 Jul, 2022 19 commits
-
-
Nathan Chancellor authored
Clang warns: arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection] DEFINE_PER_CPU(u64, x86_spec_ctrl_current); ^ arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here extern u64 x86_spec_ctrl_current; ^ 1 error generated. The declaration should be using DECLARE_PER_CPU instead so all attributes stay in sync. Cc: stable@vger.kernel.org Fixes: fc02735b ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf and wireless. Still no major regressions, the release continues to be calm. An uptick of fixes this time around due to trivial data race fixes and patches flowing down from subtrees. There has been a few driver fixes (particularly a few fixes for false positives due to 66e4c8d9 which went into -next in May!) that make me worry the wide testing is not exactly fully through. So "calm" but not "let's just cut the final ASAP" vibes over here. Current release - regressions: - wifi: rtw88: fix write to const table of channel parameters Current release - new code bugs: - mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify - mlx5: - TC, allow offload from uplink to other PF's VF - Lag, decouple FDB selection and shared FDB - Lag, correct get the port select mode str - bnxt_en: fix and simplify XDP transmit path - r8152: fix accessing unset transport header Previous releases - regressions: - conntrack: fix crash due to confirmed bit load reordering (after atomic -> refcount conversion) - stmmac: dwc-qos: disable split header for Tegra194 Previous releases - always broken: - mlx5e: ring the TX doorbell on DMA errors - bpf: make sure mac_header was set before using it - mac80211: do not wake queues on a vif that is being stopped - mac80211: fix queue selection for mesh/OCB interfaces - ip: fix dflt addr selection for connected nexthop - seg6: fix skb checksums for SRH encapsulation/insertion - xdp: fix spurious packet loss in generic XDP TX path - bunch of sysctl data race fixes - nf_log: incorrect offset to network header Misc: - bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs" * tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) nfp: flower: configure tunnel neighbour on cmsg rx net/tls: Check for errors in tls_device_init MAINTAINERS: Add an additional maintainer to the AMD XGBE driver xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue selftests/net: test nexthop without gw ip: fix dflt addr selection for connected nexthop net: atlantic: remove aq_nic_deinit() when resume net: atlantic: remove deep parameter on suspend/resume functions sfc: fix kernel panic when creating VF seg6: bpf: fix skb checksum in bpf_push_seg6_encap() seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors seg6: fix skb checksum evaluation in SRH encapsulation/insertion sfc: fix use after free when disabling sriov net: sunhme: output link status with a single print. r8152: fix accessing unset transport header net: stmmac: fix leaks in probe net: ftgmac100: Hold reference returned by of_get_child_by_name() nexthop: Fix data-races around nexthop_compat_mode. ipv4: Fix data-races around sysctl_ip_dynaddr. tcp: Fix a data-race around sysctl_tcp_ecn_fallback. ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three smb3 client fixes: - two multichannel fixes: fix a potential deadlock freeing a channel, and fix a race condition on failed creation of a new channel - mount failure fix: work around a server bug in some common older Samba servers by avoiding padding at the end of the negotiate protocol request" * tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: workaround negprot bug in some Samba servers cifs: remove unnecessary locking of chan_lock while freeing session cifs: fix race condition with delayed threads -
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Enable SETATTR(time_create) to fix regression with Mac OS clients - Fix a lockd crasher and broken NLM UNLCK behavior" * tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: lockd: fix nlm_close_files lockd: set fl_owner when unlocking files NFSD: Decode NFSv4 birth time attribute
-
Linus Torvalds authored
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Here are a number of fixes for recently found bugs. Only 'ima: fix violation measurement list record' was introduced in the current release. The rest address existing bugs" * tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix potential memory leak in ima_init_crypto() ima: force signature verification when CONFIG_KEXEC_SIG is configured ima: Fix a potential integer overflow in ima_appraise_measurement ima: fix violation measurement list record Revert "evm: Fix memleak in init_desc"
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - quieten the spectre-bhb prints - mark flattened device tree sections as shareable - remove some obsolete CPU domain code and help text - fix thumb unaligned access abort emulation - fix amba_device_add() refcount underflow - fix literal placement * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9208/1: entry: add .ltorg directive to keep literals in range ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction ARM: 9213/1: Print message about disabled Spectre workarounds only once ARM: 9212/1: domain: Modify Kconfig help text ARM: 9211/1: domain: drop modify_domain() ARM: 9210/1: Mark the FDT_FIXED sections as shareable ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
-
Guenter Roeck authored
The UML function names to_virt() and to_phys() are exposed by UML headers, and are very generic and may be defined by drivers. As it turns out, commit 9409c9b6 ("pmem: refactor pmem_clear_poison()") did exactly that. This results in build errors such as the following when trying to build um:allmodconfig: drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’: ./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’ 105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt)) | ^~~~~~~ Use less generic function names for the um specific to_phys() and to_virt() functions to fix the problem and to avoid similar problems in the future. Fixes: 9409c9b6 ("pmem: refactor pmem_clear_poison()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Hopefully the last one for 5.19. This became bigger than wished, but all changes are pretty device-specific small fixes, which look less worrisome. The majority of changes are about various ASoC fixes, while the usual HD-audio quirks are included as well" * tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221 ALSA: hda/realtek: fix mute/micmute LEDs for HP machines ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671 ALSA: hda - Add fixup for Dell Latitidue E5430 ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model ALSA: hda/realtek: Fix headset mic for Acer SF313-51 ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks() ASoC: rt5640: Fix the wrong state of JD1 and JD2 ASoC: Intel: sof_rt5682: fix out-of-bounds array access ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph() ASoC: tas2764: Fix amp gain register offset & default ASoC: tas2764: Correct playback volume range ASoC: tas2764: Fix and extend FSYNC polarity handling ASoC: tas2764: Add post reset delays ASoC: dt-bindings: Fix description for msm8916 ASoC: doc: Capitalize RESET line name ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE ASoC: cs47l92: Fix event generation for OUT1 demux ...
-
Tianyu Yuan authored
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956 ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by:
Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.comSigned-off-by:
-
Tariq Toukan authored
Add missing error checks in tls_device_init. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Reported-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.comSigned-off-by:
-
Tom Lendacky authored
Add Shyam Sundar S K as an additional maintainer to support the AMD XGBE network device driver. Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/db367f24089c2bbbcd1cec8e21af49922017a110.1657751501.git.thomas.lendacky@amd.comSigned-off-by:
-
Juergen Gross authored
xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty. Cc: stable@vger.kernel.org Fixes: 98f6d57c ("xen-netback: process guest rx packets in batches") Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.comSigned-off-by:
-
Linus Torvalds authored
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has not been building cleanly on powerpc and causes link errors due to mixing hard- and soft-float object files: powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o [..] and while patches are floating around, it's not exactly obvious what is going on. The problem bisects to commit 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") but that is probably more about changing config variables than the fundamental cause. Despite the bisection result, a more directly related commit seems to be 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder"). It's probably a combination of the two. This has been going on since the merge window, without any final word. So instead of blindly applying patches that may or may not be the right thing, let's disable this for now. As Michael Ellerman says: "IIUIC this code was never enabled on ppc before, so disabling it seems like a reasonable fix to get the build clean" and once we have more actual feedback (and find any potential users) we can always re-enable it with the patch that fixes the issues and back-port as necessary. Fixes: 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Reported-and-tested-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
This test implement the scenario described in the commit "ip: fix dflt addr selection for connected nexthop". The test configures a nexthop object with an output device only (no gateway address) and a route that uses this nexthop. The goal is to check if the kernel selects a valid source address. Link: https://lore.kernel.org/netdev/20220712095545.10947-1-nicolas.dichtel@6wind.com/Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220713114853.29406-2-nicolas.dichtel@6wind.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Nicolas Dichtel authored
When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable@vger.kernel.org Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops") Reported-by:
Edwin Brossette <edwin.brossette@6wind.com> Signed-off-by:
-
Ard Biesheuvel authored
LKP reports a build issue on Clang, related to a literal load of __current issued through the ldr_va macro. This turns out to be due to the fact that group relocations are disabled when CONFIG_COMPILE_TEST=y, which means that the ldr_va macro resolves to a pair of LDR instructions, the first one being a literal load issued too far from its literal pool. Due to the introduction of a couple of new uses of this macro in commit 50807460 ("ARM: 9195/1: entry: avoid explicit literal loads"), the literal pools end up getting rearranged in a way that causes the literal for __current to go out of range. Let's fix this up by putting a .ltorg directive in a suitable place in the code. Link: https://lore.kernel.org/all/202205290805.1vZLAr36-lkp@intel.com/ Fixes: 50807460 ("ARM: 9195/1: entry: avoid explicit literal loads") Reported-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-
Wang Kefeng authored
"ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads to a refcount underflow if amba_device_add() fails, which called by of_amba_device_create(), the of_amba_device_create() already exists the error handling, so amba_put_device() only need to be added into amba_deferred_retry(). Fixes: 7719a68b ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Chia-Lin Kao (AceLan) authored
aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by:
Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.comSigned-off-by:
-
Chia-Lin Kao (AceLan) authored
Below commit claims that atlantic NIC requires to reset the device on pm op, and had set the deep to true for all suspend/resume functions. commit 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") So, we could remove deep parameter on suspend/resume functions without any functional change. Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by:
-
