- 17 Jun, 2013 40 commits
-
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean Signed-off-by:
Libo Chen <libo.chen@huawei.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Mauro Carvalho Chehab authored
As USB/PCI/MEDIA_SUPPORT dependencies can be tristate, we can't simply make the bool menu to be dependent on it. Everything below the menu should also depend on it, otherwise, we risk to allow building them with 'y', while only 'm' would be supported. So, add an IF just before everything below, in order to avoid such risks. Signed-off-by: -
Laurent Pinchart authored
The sensor is powered by three supplies. Use the bulk regulator API to enable and disable them instead of performing the operations manually. This fixes a warning caused by ignoring the return value of regulator_enable(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Lad, Prabhakar authored
Add OF support for the mt9p031 sensor driver. Alongside this patch sorts the header inclusion alphabetically. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Hans Verkuil authored
drivers/media/i2c/ths8200.c: In function ‘ths8200_g_register’: drivers/media/i2c/ths8200.c:121:21: warning: unused variable ‘client’ [-Wunused-variable] drivers/media/i2c/ths8200.c: In function ‘ths8200_s_register’: drivers/media/i2c/ths8200.c:132:21: warning: unused variable ‘client’ [-Wunused-variable] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Fix uninitialized fields and a missing TRY_FMT implementation in saa6752hs. Signed-off-by:
-
Hans Verkuil authored
- map overlay format values to the supported ranges - set colorspace - zero priv field - fix cliplist handling - fix field handling - initialize ovbuf values Signed-off-by:
-
Hans Verkuil authored
This is a global field, not a per-filehandle field. Signed-off-by:
-
Hans Verkuil authored
These fields are global, not per-filehandle. Signed-off-by:
-
Hans Verkuil authored
This is global data, not per-filehandle data. Signed-off-by:
-
Hans Verkuil authored
This information is already available in vfl_type in video_device. Signed-off-by:
-
Ismael Luceno authored
This cleans up the saa712x setup code and there are no functional changes. Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> [hans.verkuil@cisco.com: add clarification that this is cleanup only] Signed-off-by:
-
Hans Verkuil authored
The full datasheets are available from TI website:- http://www.ti.com/product/ths8200 Note: This patch adds support only for progressive format as of now. Signed-off-by:
Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by:
Martin Bugge <martin.bugge@cisco.com> Signed-off-by:
-
Hans Verkuil authored
- do exact matching for special formats like PAL-M - drop autodetect support: it's non-standard, and it is bogus as well since there is no way to get back the detected standard since neither g_std nor querystd are implemented. Signed-off-by:
-
Hans Verkuil authored
Explicitly mention that this ioctl should return V4L2_STD_UNKNOWN if not signal was detected. Signed-off-by:
-
Hans Verkuil authored
Improve the querystd comment. Signed-off-by:
-
Hans Verkuil authored
Currently, if the norm set is V4L2_STD_ALL, then autodetect the current standard and use that. This is non-standard behavior, and in fact it hasn't worked for a very long time: before s_std is called in this driver, the v4l2 core will mask it with the tvnorms field. So even if the application passes V4L2_STD_ALL, the zoran driver will always see a subset of that. Since nobody ever complained about this we just remove this non-standard functionality. Signed-off-by:
-
Hans Verkuil authored
AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by:
-
Hans Verkuil authored
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard with the detected standards. Note that the v4l2 core initializes the std with tvnorms before calling the querystd ioctl. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The use of current_norm to keep track of the current standard has been deprecated for quite some time. Now that all drivers that were using it have been converted to use g_std we can drop it from the core. It was a bad idea to introduce this at the time: since it is a per-device node field it didn't work for drivers that create multiple nodes, all sharing the same tuner (e.g. video and vbi nodes, or a raw video node and a compressed video node). In addition it was very surprising behavior that g_std was implemented in the core. Often drivers implemented both g_std and current_norm, because they didn't understand how it should be used. Since the benefits were very limited (if they were there at all), it is better to just drop it and require that drivers just implement g_std. Signed-off-by:
-
Hans Verkuil authored
Since this driver provides a g_std op the current_norm field isn't used anyway, so just drop it. Signed-off-by:
-
Hans Verkuil authored
Since this driver properly implements g_std, the current_norm field is actually unused anyway. Signed-off-by:
-
Hans Verkuil authored
current_norm use is deprecated because it is per-devicenode and if you have more device nodes all dependent on the same video source, then this no longer works. Just implement g_std instead. Signed-off-by:
-
Hans Verkuil authored
The use of current_norm can be dropped. The g_std ioctl was already implemented, so current_norm didn't do anything useful anyway. Signed-off-by:
-
Hans Verkuil authored
current_norm is deprecated. Replace it by g_std. Signed-off-by:
-
Hans Verkuil authored
Replace current_norm by g_std. Also initialize the standard to the more common NTSC-M format (which is also what current_norm used). Signed-off-by:
-
Hans Verkuil authored
The use of current_norm is deprecated, so remove it. This driver actually already implements g_std, which overrides current_norm, but the 'std' field was never initialized correctly. This has been fixed as well. Signed-off-by:
-
Hans Verkuil authored
The current_norm field is deprecated, so don't set it. Since it is set to V4L2_STD_UNKNOWN which is 0 it didn't do anything anyway. Also remove a few other unnecessary uses of V4L2_STD_UNKNOWN. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
