- 30 Nov, 2017 32 commits
-
-
Eric Biggers authored
commit b1127085 upstream. The WARN_ON(!key->len) in set_secret() in net/ceph/crypto.c is hit if a user tries to add a key of type "ceph" with an invalid payload as follows (assuming CONFIG_CEPH_LIB=y): echo -e -n '\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \ | keyctl padd ceph desc @s This can be hit by fuzzers. As this is merely bad input and not a kernel bug, replace the WARN_ON() with return -EINVAL. Fixes: 7af3ea18 ("libceph: stop allocating a new cipher on every crypto request") Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit db86be3a upstream. We're freeing the list iterator so we should be using the _safe() version of hlist_for_each_entry(). Fixes: 88b4a07e ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Andreas Rohner authored
commit 31ccb1f7 upstream. There is a race condition between nilfs_dirty_inode() and nilfs_set_file_dirty(). When a file is opened, nilfs_dirty_inode() is called to update the access timestamp in the inode. It calls __nilfs_mark_inode_dirty() in a separate transaction. __nilfs_mark_inode_dirty() caches the ifile buffer_head in the i_bh field of the inode info structure and marks it as dirty. After some data was written to the file in another transaction, the function nilfs_set_file_dirty() is called, which adds the inode to the ns_dirty_files list. Then the segment construction calls nilfs_segctor_collect_dirty_files(), which goes through the ns_dirty_files list and checks the i_bh field. If there is a cached buffer_head in i_bh it is not marked as dirty again. Since nilfs_dirty_inode() and nilfs_set_file_dirty() use separate transactions, it is possible that a segment construction that writes out the ifile occurs in-between the two. If this happens the inode is not on the ns_dirty_files list, but its ifile block is still marked as dirty and written out. In the next segment construction, the data for the file is written out and nilfs_bmap_propagate() updates the b-tree. Eventually the bmap root is written into the i_bh block, which is not dirty, because it was written out in another segment construction. As a result the bmap update can be lost, which leads to file system corruption. Either the virtual block address points to an unallocated DAT block, or the DAT entry will be reused for something different. The error can remain undetected for a long time. A typical error message would be one of the "bad btree" errors or a warning that a DAT entry could not be found. This bug can be reproduced reliably by a simple benchmark that creates and overwrites millions of 4k files. Link: http://lkml.kernel.org/r/1509367935-3086-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
NeilBrown authored
commit ecc0c469 upstream. Currently if the autofs kernel module gets an error when writing to the pipe which links to the daemon, then it marks the whole moutpoint as catatonic, and it will stop working. It is possible that the error is transient. This can happen if the daemon is slow and more than 16 requests queue up. If a subsequent process tries to queue a request, and is then signalled, the write to the pipe will return -ERESTARTSYS and autofs will take that as total failure. So change the code to assess -ERESTARTSYS and -ENOMEM as transient failures which only abort the current request, not the whole mountpoint. It isn't a crash or a data corruption, but having autofs mountpoints suddenly stop working is rather inconvenient. Ian said: : And given the problems with a half dozen (or so) user space applications : consuming large amounts of CPU under heavy mount and umount activity this : could happen more easily than we expect. Link: http://lkml.kernel.org/r/87y3norvgp.fsf@notabene.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Stanislaw Gruszka authored
commit bfa62a52 upstream. ENOENT usb error mean "specified interface or endpoint does not exist or is not enabled". Mark device not present when we encounter this error similar like we do with ENODEV error. Otherwise we can have infinite loop in rt2x00usb_work_rxdone(), because we remove and put again RX entries to the queue infinitely. We can have similar situation when submit urb will fail all the time with other error, so we need consider to limit number of entries processed by rxdone work. But for now, since the patch fixes reproducible soft lockup issue on single processor systems and taken ENOENT error meaning, let apply this fix. Patch adds additional ENOENT check not only in rx kick routine, but also on other places where we check for ENODEV error. Reported-by:
Richard Genoud <richard.genoud@gmail.com> Debugged-by:
Stanislaw Gruszka <sgruszka@redhat.com> Tested-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Mirko Parthey authored
commit 56a46acf upstream. The WLAN LED on the Linksys WRT54GSv1 is active low, but the software treats it as active high. Fix the inverted logic. Fixes: 7bb26b16 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0") Signed-off-by:
Mirko Parthey <mirko.parthey@web.de> Looks-ok-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16071/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
commit 547da673 upstream. Fix a commit 7aeb753b ("MIPS: Implement task_user_regset_view.") regression, then activated by commit 6a9c001b ("MIPS: Switch ELF core dumper to use regsets.)", that caused n32 processes to dump o32 core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file header's `e_flags' member: $ file tls-core tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...] $ ./tls-core Aborted (core dumped) $ file core core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style $ Previously the flag was set as the result of a: statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the `->e_flags' member of the regset view chosen is. We have the views defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64 one, and the latter is used for n32 as well. Consequently an o32 core file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class is chosen elsewhere, and the 32-bit one is correctly selected for n32). Correct the issue then by defining an n32 regset view and using it as appropriate. Issue discovered in GDB testing. Fixes: 7aeb753b ("MIPS: Implement task_user_regset_view.") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Djordje Todorovic <djordje.todorovic@rt-rk.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17617/Signed-off-by:
-
Masahiro Yamada authored
commit 3cad14d5 upstream. arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so we cannot build bcm96358nb4ser.dtb . Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Fixes: 69583551 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
James Hogan authored
commit c7fd89a6 upstream. Building 32-bit MIPS64r2 kernels produces warnings like the following on certain toolchains (such as GNU assembler 2.24.90, but not GNU assembler 2.28.51) since commit 22b8ba76 ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels"), due to the exposure of fpu_save_16odd from fpu_save_double and fpu_restore_16odd from fpu_restore_double: arch/mips/kernel/r4k_fpu.S:47: Warning: float register should be even, was 1 ... arch/mips/kernel/r4k_fpu.S:59: Warning: float register should be even, was 1 ... This appears to be because .set mips64r2 does not change the FPU ABI to 64-bit when -march=mips64r2 (or e.g. -march=xlp) is provided on the command line on that toolchain, from the default FPU ABI of 32-bit due to the -mabi=32. This makes access to the odd FPU registers invalid. Fix by explicitly changing the FPU ABI with .set fp=64 directives in fpu_save_16odd and fpu_restore_16odd, and moving the undefine of fp up in asmmacro.h so fp doesn't turn into $30. Fixes: 22b8ba76 ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels") Signed-off-by:
-
Hou Tao authored
commit b9a41d21 upstream. The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
John Crispin authored
commit 8593b18a upstream. Switch the printk() call to the prefered pr_warn() api. Fixes: 7e5873d3 ("MIPS: pci: Add MT7620a PCIE driver") Signed-off-by:
John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15321/Signed-off-by:
-
Mikulas Patocka authored
commit 856eb091 upstream. The structure srcu_struct can be very big, its size is proportional to the value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field io_barrier in the struct mapped_device has 84kB in the debugging kernel and 50kB in the non-debugging kernel. The large size may result in failure of the function kzalloc_node. In order to avoid the allocation failure, we use the function kvzalloc_node, this function falls back to vmalloc if a large contiguous chunk of memory is not available. This patch also moves the field io_barrier to the last position of struct mapped_device - the reason is that on many processor architectures, short memory offsets result in smaller code than long memory offsets - on x86-64 it reduces code size by 320 bytes. Note to stable kernel maintainers - the kernels 4.11 and older don't have the function kvzalloc_node, you can use the function vzalloc_node instead. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 74d4108d upstream. The default max_cache_size_bytes for dm-bufio is meant to be the lesser of 25% of the size of the vmalloc area and 2% of the size of lowmem. However, on 32-bit systems the intermediate result in the expression (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100 overflows, causing the wrong result to be computed. For example, on a 32-bit system where the vmalloc area is 520093696 bytes, the result is 1174405 rather than the expected 130023424, which makes the maximum cache size much too small (far less than 2% of lowmem). This causes severe performance problems for dm-verity users on affected systems. Fix this by using mult_frac() to correctly multiply by a percentage. Do this for all places in dm-bufio that multiply by a percentage. Also replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary to the comment is now defined in include/linux/vmalloc.h. Depends-on: 9993bc63 ("sched/x86: Fix overflow in cyc2ns_offset") Fixes: 95d402f0 ("dm: add bufio") Signed-off-by:
-
Vijendar Mukunda authored
commit 9ceace3c upstream. This commit adds PCI ID for Raven platform Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vadim Lomovtsev authored
commit 7f342678 upstream. The Cavium ThunderX (CN8XXX) family of PCIe Root Ports does not advertise an ACS capability. However, the RTL internally implements similar protection as if ACS had Request Redirection, Completion Redirection, Source Validation, and Upstream Forwarding features enabled. Change Cavium ACS capabilities quirk flags accordingly. Fixes: b404bcfb ("PCI: Add ACS quirk for all Cavium devices") Signed-off-by:
Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> [bhelgaas: tidy changelog, comment, stable tag] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Mathias Kresin authored
commit 05a67cc2 upstream. There is a typo inside the pinmux setup code. The function is called refclk and not reclk. Fixes: 53263a1c ("MIPS: ralink: add mt7628an support") Signed-off-by:
Mathias Kresin <dev@kresin.me> Acked-by:
-
Mathias Kresin authored
commit 8ef4b43c upstream. According to the datasheet the REFCLK pin is shared with GPIO#37 and the PERST pin is shared with GPIO#36. Fixes: 53263a1c ("MIPS: ralink: add mt7628an support") Signed-off-by:
-
Philip Derrin authored
commit 3b0c0c92 upstream. When CONFIG_ARM_LPAE is set, the PMD dump relies on the software read-only bit to determine whether a page is writable. This concealed a bug which left the kernel text section writable (AP2=0) while marked read-only in the software bit. In a kernel with the AP2 bug, the dump looks like this: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M ro x SHD 0xc0600000-0xc0800000 2M ro NX SHD 0xc0800000-0xc4800000 64M RW NX SHD The fix is to check that the software and hardware bits are both set before displaying "ro". The dump then shows the true perms: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M RW x SHD 0xc0600000-0xc0800000 2M RW NX SHD 0xc0800000-0xc4800000 64M RW NX SHD Fixes: ded94779 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE") Signed-off-by:
Philip Derrin <philip@cog.systems> Tested-by:
Neil Dick <neil@cog.systems> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Philip Derrin authored
commit 400eeffa upstream. Currently, for ARM kernels with CONFIG_ARM_LPAE and CONFIG_STRICT_KERNEL_RWX enabled, the 2MiB pages mapping the kernel code and rodata are writable. They are marked read-only in a software bit (L_PMD_SECT_RDONLY) but the hardware read-only bit is not set (PMD_SECT_AP2). For user mappings, the logic that propagates the software bit to the hardware bit is in set_pmd_at(); but for the kernel, section_update() writes the PMDs directly, skipping this logic. The fix is to set PMD_SECT_AP2 for read-only sections in section_update(), at the same time as L_PMD_SECT_RDONLY. Fixes: 1e347922 ("ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error") Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
-
Catalin Marinas authored
commit 6218f96c upstream. The generic pte_access_permitted() implementation only checks for pte_present() (together with the write permission where applicable). However, for both kernel ptes and PROT_NONE mappings pte_present() also returns true on arm64 even though such mappings are not user accessible. Additionally, arm64 now supports execute-only user permission (PROT_EXEC) which is implemented by clearing the PTE_USER bit. With this patch the arm64 implementation of pte_access_permitted() checks for the PTE_VALID and PTE_USER bits together with writable access if applicable. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andy Lutomirski authored
commit ca37e57b upstream. Running this code with IRQs enabled (where dummy_lock is a spinlock): static void check_load_gs_index(void) { /* This will fail. */ load_gs_index(0xffff); spin_lock(&dummy_lock); spin_unlock(&dummy_lock); } Will generate a lockdep warning. The issue is that the actual write to %gs would cause an exception with IRQs disabled, and the exception handler would, as an inadvertent side effect, update irqflag tracing to reflect the IRQs-off status. native_load_gs_index() would then turn IRQs back on and return with irqflag tracing still thinking that IRQs were off. The dummy lock-and-unlock causes lockdep to notice the error and warn. Fix it by adding the missing tracing. Apparently nothing did this in a context where it mattered. I haven't tried to find a code path that would actually exhibit the warning if appropriately nasty user code were running. I suspect that the security impact of this bug is very, very low -- production systems don't run with lockdep enabled, and the warning is mostly harmless anyway. Found during a quick audit of the entry code to try to track down an unrelated bug that Ingo found in some still-in-development code. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e1aeb0e6ba8dd430ec36c8a35e63b429698b4132.1511411918.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit 12a78d43 upstream. The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at <jump_table>:ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 1d9ddde1 upstream. On a non-preemptible kernel, if KEYCTL_DH_COMPUTE is called with the largest permitted inputs (16384 bits), the kernel spends 10+ seconds doing modular exponentiation in mpi_powm() without rescheduling. If all threads do it, it locks up the system. Moreover, it can cause rcu_sched-stall warnings. Notwithstanding the insanity of doing this calculation in kernel mode rather than in userspace, fix it by calling cond_resched() as each bit from the exponent is processed. It's still noninterruptible, but at least it's preemptible now. Do the cond_resched() once per bit rather than once per MPI limb because each limb might still easily take 100+ milliseconds on slow CPUs. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paul E. McKenney authored
commit 7c2102e5 upstream. The current implementation of synchronize_sched_expedited() incorrectly assumes that resched_cpu() is unconditional, which it is not. This means that synchronize_sched_expedited() can hang when resched_cpu()'s trylock fails as follows (analysis by Neeraj Upadhyay): o CPU1 is waiting for expedited wait to complete: sync_rcu_exp_select_cpus rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5 IPI sent to CPU5 synchronize_sched_expedited_wait ret = swait_event_timeout(rsp->expedited_wq, sync_rcu_preempt_exp_done(rnp_root), jiffies_stall); expmask = 0x20, CPU 5 in idle path (in cpuidle_enter()) o CPU5 handles IPI and fails to acquire rq lock. Handles IPI sync_sched_exp_handler resched_cpu returns while failing to try lock acquire rq->lock need_resched is not set o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to idle (schedule() is not called). o CPU 1 reports RCU stall. Given that resched_cpu() is now used only by RCU, this commit fixes the assumption by making resched_cpu() unconditional. Reported-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
WANG Cong authored
commit 499fde66 upstream. As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f ("net: fix sleeping for sk_wait_event()"). Reported-by:
Michal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: "Jorgen S. Hansen" <jhansen@vmware.com> Signed-off-by:
-
WANG Cong authored
commit 76da0704 upstream. In commit 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by:
jeffy <jeffy.chen@rock-chips.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Vlastimil Babka authored
commit cb0631fd upstream. Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in __do_page_fault() with the following reproducer: mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0) mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0) r0 = userfaultfd(0x0) ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0}) ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0}) r1 = gettid() syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0) tkill(r1, 0x7) The vma should be pinned by mmap_sem, but handle_userfault() might (in a return to userspace scenario) release it and then acquire again, so when we return to __do_page_fault() (with other result than VM_FAULT_RETRY), the vma might be gone. Specifically, per Andrea the scenario is "A return to userland to repeat the page fault later with a VM_FAULT_NOPAGE retval (potentially after handling any pending signal during the return to userland). The return to userland is identified whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in vmf->flags" However, since commit a3c4fb7c ("x86/mm: Fix fault error path using unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after that point, which can thus become use-after-free. Fix this by moving the read before calling handle_mm_fault(). Reported-by:
syzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
Kirill A. Shutemov <kirill@shutemov.name> Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Lv Zheng authored
commit 53c5eaab upstream. Originally the Samsung quirks removed by commit 4c237371 can be covered by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956 changed ec_freeze_events=Y back to N, making this problem re-surface. Actually, if commit e923e8e7 is robust enough, we can freely change ec_freeze_events mode, so this patch fixes the issue by improving commit e923e8e7. Related commits listed in the merged order: Commit: e923e8e7 Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled Commit: 4c237371 Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk Commit: 9c40f956 Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression This patch not only fixes the reported post-resume EC event triggering source issue, but also fixes an unreported similar issue related to the driver bind by adding EC event triggering source in ec_install_handlers(). Fixes: e923e8e7 (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled) Fixes: 4c237371 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk) Fixes: 9c40f956 (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Reported-by:
Alistair Hamilton <ahpatent@gmail.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Vasily Gorbik authored
commit b192571d upstream. Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody". Also replaces 8 spaces with a single tab to reduce the memory footprint. Fixes the following KASAN finding: BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538 Write of size 1 at addr 000000005a4a75a0 by task bash/1282 CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Call Trace: ([<000000000011eeb6>] show_stack+0x56/0x88) [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0 [<00000000004e2994>] print_address_description+0xf4/0x288 [<00000000004e2cf2>] kasan_report+0x13a/0x230 [<0000000000e38ae6>] number+0x3fe/0x538 [<0000000000e3dfe4>] vsnprintf+0x194/0x948 [<0000000000e3ea42>] sprintf+0xa2/0xb8 [<00000000001198dc>] print_insn+0x374/0x500 [<0000000000119346>] show_code+0x4ee/0x538 [<000000000011f234>] show_registers+0x34c/0x388 [<000000000011f2ae>] show_regs+0x3e/0xa8 [<000000000011f502>] die+0x1ea/0x2e8 [<0000000000138f0e>] do_no_context+0x106/0x168 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0 [<000000000090639e>] sysrq_handle_crash+0x46/0x58 ([<0000000000000007>] 0x7) [<00000000009073fa>] __handle_sysrq+0x102/0x218 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100 [<000000000061d67a>] proc_reg_write+0xb2/0x128 [<0000000000520be6>] __vfs_write+0xee/0x368 [<0000000000521222>] vfs_write+0x21a/0x278 [<000000000052156a>] SyS_write+0xda/0x178 [<0000000000e555cc>] system_call+0xc4/0x270 The buggy address belongs to the page: page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00 >000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 ^ 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00 ================================================================== Signed-off-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 5c505387 upstream. The e7 opcode table does not have an end marker. Hence when trying to find an unknown e7 instruction the code will access memory behind the table until it finds something that matches the opcode, or the kernel crashes, whatever comes first. This affects not only the in-kernel disassembler but also uprobes and kprobes which refuse to set a probe on unknown instructions, and therefore search the opcode tables to figure out if instructions are known or not. Fixes: 3585cb02 ("s390/disassembler: add vector instructions") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit d6e646ad upstream. For PREEMPT enabled kernels the runtime instrumentation (RI) code contains a possible use-after-free bug. If a task that makes use of RI exits, it will execute do_exit() while still enabled for preemption. That function will call exit_thread_runtime_instr() via exit_thread(). If exit_thread_runtime_instr() gets preempted after the RI control block of the task has been freed but before the pointer to it is set to NULL, then save_ri_cb(), called from switch_to(), will write to already freed memory. Avoid this and simply disable preemption while freeing the control block and setting the pointer to NULL. Fixes: e4b8b3f3 ("s390: add support for runtime instrumentation") Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit a1c5befc upstream. Dan Horák reported the following crash related to transactional execution: User process fault: interruption code 0013 ilc:3 in libpthread-2.26.so[3ff93c00000+1b000] CPU: 2 PID: 1 Comm: /init Not tainted 4.13.4-300.fc27.s390x #1 Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) task: 00000000fafc8000 task.stack: 00000000fafc4000 User PSW : 0705200180000000 000003ff93c14e70 R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 RI:0 EA:3 User GPRS: 0000000000000077 000003ff00000000 000003ff93144d48 000003ff93144d5e 0000000000000000 0000000000000002 0000000000000000 000003ff00000000 0000000000000000 0000000000000418 0000000000000000 000003ffcc9fe770 000003ff93d28f50 000003ff9310acf0 000003ff92b0319a 000003ffcc9fe6d0 User Code: 000003ff93c14e62: 60e0b030 std %f14,48(%r11) 000003ff93c14e66: 60f0b038 std %f15,56(%r11) #000003ff93c14e6a: e5600000ff0e tbegin 0,65294 >000003ff93c14e70: a7740006 brc 7,3ff93c14e7c 000003ff93c14e74: a7080000 lhi %r0,0 000003ff93c14e78: a7f40023 brc 15,3ff93c14ebe 000003ff93c14e7c: b2220000 ipm %r0 000003ff93c14e80: 8800001c srl %r0,28 There are several bugs with control register handling with respect to transactional execution: - on task switch update_per_regs() is only called if the next task has an mm (is not a kernel thread). This however is incorrect. This breaks e.g. for user mode helper handling, where the kernel creates a kernel thread and then execve's a user space program. Control register contents related to transactional execution won't be updated on execve. If the previous task ran with transactional execution disabled then the new task will also run with transactional execution disabled, which is incorrect. Therefore call update_per_regs() unconditionally within switch_to(). - on startup the transactional execution facility is not enabled for the idle thread. This is not really a bug, but an inconsistency to other facilities. Therefore enable the facility if it is available. - on fork the new thread's per_flags field is not cleared. This means that a child process inherits the PER_FLAG_NO_TE flag. This flag can be set with a ptrace request to disable transactional execution for the current process. It should not be inherited by new child processes in order to be consistent with the handling of all other PER related debugging options. Therefore clear the per_flags field in copy_thread_tls(). Reported-and-tested-by:
Dan Horák <dan@danny.cz> Fixes: d35339a4 ("s390: add support for transactional memory") Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
- 24 Nov, 2017 8 commits
-
-
Greg Kroah-Hartman authored
-
Jann Horn authored
commit 373c4557 upstream. This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Changed for 4.4/4.9 stable backport: - fix up conflict in the huge_pte_offset() call Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Jan Harkes authored
commit d337b66a upstream. When an application called fsync on a file in Coda a small request with just the file identifier was allocated, but the declared length was set to the size of union of all possible upcall requests. This bug has been around for a very long time and is now caught by the extra checking in usercopy that was introduced in Linux-4.8. The exposure happens when the Coda cache manager process reads the fsync upcall request at which point it is killed. As a result there is nobody servicing any further upcalls, trapping any processes that try to access the mounted Coda filesystem. Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
Pavel Tatashin authored
commit d135e575 upstream. In reset_deferred_meminit() we determine number of pages that must not be deferred. We initialize pages for at least 2G of memory, but also pages for reserved memory in this node. The reserved memory is determined in this function: memblock_reserved_memory_within(), which operates over physical addresses, and returns size in bytes. However, reset_deferred_meminit() assumes that that this function operates with pfns, and returns page count. The result is that in the best case machine boots slower than expected due to initializing more pages than needed in single thread, and in the worst case panics because fewer than needed pages are initialized early. Link: http://lkml.kernel.org/r/20171021011707.15191-1-pasha.tatashin@oracle.com Fixes: 864b9a39 ("mm: consider memblock reservations for deferred memory initialization sizing") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Corey Minyard authored
commit 392a17b1 upstream. When I set the timeout to a specific value such as 500ms, the timeout event will not happen in time due to the overflow in function check_msg_timeout: ... ent->timeout -= timeout_period; if (ent->timeout > 0) return; ... The type of timeout_period is long, but ent->timeout is unsigned long. This patch makes the type consistent. Reported-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
-
alex chen authored
commit 28f5a8a7 upstream. we should wait dio requests to finish before inode lock in ocfs2_setattr(), otherwise the following deadlock will happen: process 1 process 2 process 3 truncate file 'A' end_io of writing file 'A' receiving the bast messages ocfs2_setattr ocfs2_inode_lock_tracker ocfs2_inode_lock_full inode_dio_wait __inode_dio_wait -->waiting for all dio requests finish dlm_proxy_ast_handler dlm_do_local_bast ocfs2_blocking_ast ocfs2_generic_handle_bast set OCFS2_LOCK_BLOCKED flag dio_end_io dio_bio_end_aio dio_complete ocfs2_dio_end_io ocfs2_dio_end_io_write ocfs2_inode_lock __ocfs2_cluster_lock ocfs2_wait_for_mask -->waiting for OCFS2_LOCK_BLOCKED flag to be cleared, that is waiting for 'process 1' unlocking the inode lock inode_dio_end -->here dec the i_dio_count, but will never be called, so a deadlock happened. Link: http://lkml.kernel.org/r/59F81636.70508@huawei.comSigned-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Acked-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Changwei Ge authored
commit 1c019671 upstream. When a node dies, other live nodes have to choose a new master for an existed lock resource mastered by the dead node. As for ocfs2/dlm implementation, this is done by function - dlm_move_lockres_to_recovery_list which marks those lock rsources as DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM changes lock resource's master later. So without invoking dlm_move_lockres_to_recovery_list, no master will be choosed after dlm recovery accomplishment since no lock resource can be found through ::resource list. What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock resources mastered a dead node, it will break up synchronization among nodes. So invoke dlm_move_lockres_to_recovery_list again. Fixs: 'commit ee8f7fcb ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")' Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by:
Vitaly Mayatskih <v.mayatskih@gmail.com> Tested-by:
-
Adam Wallis authored
commit a9df21e3 upstream. Commit adfa543e ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605Signed-off-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
