Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also
controlled).

Add a driver for it.

The register operations in this driver is mainly extracted from the BSP
USB3 driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

The new Allwinner H6 SoC contains a USB3 PHY that is wired to the
external USB3 pins of the SoC.

Add a device tree binding for the PHY.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

SM8150 UFS PHY is v4 of QMP phy. Add support for V4 QMP phy register
defines and support for SM8150 QMP UFS PHY.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Document "qcom,sdm845-qmp-ufs-phy" compatible string for QMP UFS PHY
found on SM8150.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Now phy-gmii-sel will disable MAC TX internal delay for PHY interface mode
"rgmii-rxid" which is incorrect.
Hence, fix it by enabling MAC TX internal delay in the case of "rgmii-rxid"
mode.

Fixes: 92b58b34 ("phy: ti: introduce phy-gmii-sel driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Use the new regulator helper instead of a for loop.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/phy/ti/phy-dm816x-usb.c:192:29: warning:
 variable phy_data set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 9bb86777 ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

On Tegra210, usb2 only otg/peripheral ports dont work in device mode.
They need an assosciated usb3 port to work in device mode. Identify
an unused usb3 port and assign it as a fake USB3 port to USB2 only
port whose mode is otg/peripheral.

Based on work by BH Hsieh <bhsieh@nvidia.com>.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Document RZ/G2N (R8A774B1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Document RZ/G2N (R8A774B1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

The xhci_ec_base variable is a pointer, so don't compare
it with an integer.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

The register address should have __iomem attributes
so fix this to remove the following sparse warnings:

drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

As platform_get_irq() now prints an error when the interrupt does not
exist, a scary warning may be printed for an optional interrupt:

    phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found

Fix this by calling platform_get_irq_optional() instead.

Fixes: 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

The local variable @priv is set but not used, can be removed
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Don't populate the array serdes_reg on the stack but instead make it
static const. Makes the object code smaller by 228 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  23875	   6232	     64	  30171	   75db	drivers/phy/phy-xgene.o

After:
   text	   data	    bss	    dec	    hex	filename
  23551	   6328	     64	  29943	   74f7	drivers/phy/phy-xgene.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):

arch/csky/kernel/perf_event.c:1340:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Pull Documentation/process update from Greg KH:
 "Here are two small Documentation/process/embargoed-hardware-issues.rst
  file updates that missed my previous char/misc pull request.

  The first one adds an Intel representative for the process, and the
  second one cleans up the text a bit more when it comes to how the
  disclosure rules work, as it was a bit confusing to some companies"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Clarify disclosure rules
  Documentation/process: Volunteer as the ambassador for Intel

Pull more vfs updates from Al Viro:
 "A couple of misc patches"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs dynroot: switch to simple_dir_operations
  fs/handle.c - fix up kerneldoc

Pull more cifs updates from Steve French:
 "Fixes from the recent SMB3 Test events and Storage Developer
  Conference (held the last two weeks).

  Here are nine smb3 patches including an important patch for debugging
  traces with wireshark, with three patches marked for stable.

  Additional fixes from last week to better handle some newly discovered
  reparse points, and a fix the create/mkdir path for setting the mode
  more atomically (in SMB3 Create security descriptor context), and one
  for path name processing are still being tested so are not included
  here"

* tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix oplock handling for SMB 2.1+ protocols
  smb3: missing ACL related flags
  smb3: pass mode bits into create calls
  smb3: Add missing reparse tags
  CIFS: fix max ea value size
  fs/cifs/sess.c: Remove set but not used variable 'capabilities'
  fs/cifs/smb2pdu.c: Make SMB2_notify_init static
  smb3: fix leak in "open on server" perf counter
  smb3: allow decryption keys to be dumped by admin for debugging

The csky_pmu.max_period has type u64, and BIT() can only return
32 bits unsigned long on C-SKY. The initialization for max_period
will be incorrect when count_width is bigger than 32.

Use BIT_ULL()
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>

We need set fp zero to let backtrace know the end. The patch fixup perf
callchain panic problem, because backtrace didn't know what is the end
of fp.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reported-by: Mao Han <han_mao@c-sky.com>

The csky implementation of free_initrd_mem() is an open-coded version of
free_reserved_area() without poisoning.

Remove it and make csky use the generic version of free_initrd_mem().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Merge active entropy generation updates.

This is admittedly partly "for discussion".  We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.

While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.

The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing.  This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.

We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.

As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.

* getrandom() active entropy waiting:
  Revert "Revert "ext4: make __ext4_get_inode_loc plug""
  random: try to actively add entropy rather than passively wait for it

This reverts commit 72dbcf72.

Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.

So revert the revert.

Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.

See commit 72dbcf72 (Revert "ext4: make __ext4_get_inode_loc plug").

This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize.  This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.

What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.

I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter.  Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.

Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.

As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts.  But this tries to take that further
by actually having a fairly complex interaction.

This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant.  And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).

Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM SCMI fixes for v5.4

Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state

* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset

Link: https://lore.kernel.org/r/20190918142139.GA4370@bogusSigned-off-by: Olof Johansson <olof@lixom.net>