- 23 Nov, 2011 2 commits
-
-
Willem Penninckx authored
The LED URB was left unkilled when the USB device is disconnected. Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Willem Penninckx authored
usb_kbd_event() and usb_kbd_led() can be called concurrently, but they are not synchronized. They both readwrite kbd->leds, and usb_kbd_event() originally just checked the URB status field, while urb.h states that "It [status field] should not be examined before the URB is returned to the completion handler." To fix this unsynchronized behavior, this patch introduces a boolean representing whether the URB is submitted, and a spinlock. Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 22 Nov, 2011 2 commits
-
-
Jiri Kosina authored
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 20 Nov, 2011 1 commit
-
-
Dan Delaney authored
Adding support for Dream Cheeky DL1800B Friend Alert device. Signed-off-by: Dan Delaney <drdelaney@loclhst.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 19 Nov, 2011 2 commits
-
-
Thomas Meyer authored
Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Jeremy Fitzhardinge authored
The USB HID Usage Tables spec defines page 6 for Generic Device Controls, the most useful of which (to me) is Battery Strength. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 16 Nov, 2011 3 commits
-
-
Jiri Kosina authored
HID 1.11 specification, section 5.10 tells us: HID class devices support the ability to ignore selected fields in a report at run- time. This is accomplished by declaring bit field in a report that is capable of containing a range of values larger than those actually generated by the control. If the host or the device receives an out-of-range value then the current value for the respective control will not be modified. So we shouldn't be restricted to EV_ABS only. Reported-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com> Tested-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
Linux should ignore values outside logical min/max range, as they are not meaningful. This is what at least some of other OSes do, and it also makes sense (currently the value gets misinterpreted larger up the stack). Reported-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com> Tested-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Chase Douglas authored
This allows the latest N-Trig devices to function properly. BugLink: https://bugs.launchpad.net/bugs/724831 Cc: stable@vger.kernel.org Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 11 Nov, 2011 1 commit
-
-
Thomas Meyer authored
Casting (void *) value returned by kmalloc is useless as mentioned in Documentation/CodingStyle, Chap 14. The semantic patch that makes this change is available in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 03 Nov, 2011 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: multitouch: decide if hid-multitouch needs to handle mt devices" HID: drivers/hid/hid-roccat.c: eliminate a null pointer dereference HID: hid-apple: add device ID of another wireless aluminium HID: Add device IDs for Macbook Pro 8 keyboards
-
Linus Torvalds authored
This reverts commit 144060fe. It causes a resume regression for Andi on his Acer Aspire 1830T post 3.1. The screen just stays black after wakeup. Also, it really looks like the wrong way to suspend and resume perf events: I think they should be done as part of the CPU suspend and resume, rather than as a notifier that does smp_call_function(). Reported-by: Andi Kleen <andi@firstfloor.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/linux-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/linux-dm: dm: raid fix device status indicator when array initializing dm log userspace: add log device dependency dm log userspace: fix comment hyphens dm: add thin provisioning target dm: add persistent data library dm: add bufio dm: export dm get md dm table: add immutable feature dm table: add always writeable feature dm table: add singleton feature dm kcopyd: add dm_kcopyd_zero to zero an area dm: remove superfluous smp_mb dm: use local printk ratelimit dm table: propagate non rotational flag
-
git://git.selinuxproject.org/~jmorris/linux-securityLinus Torvalds authored
* 'for-linus' of git://git.selinuxproject.org/~jmorris/linux-security: TOMOYO: Fix interactive judgment functionality.
-
- 02 Nov, 2011 25 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds authored
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (21 commits) MAINTAINERS: add an entry for Edac Sandy Bridge driver edac: tag sb_edac as EXPERIMENTAL, as it requires more testing EDAC: Fix incorrect edac mode reporting in sb_edac edac: sb_edac: Add it to the building system edac: Add an experimental new driver to support Sandy Bridge CPU's i7300_edac: Fix error cleanup logic i7core_edac: Initialize memory name with cpu, channel, bank i7core_edac: Fix compilation on 32 bits arch i7core_edac: scrubbing fixups EDAC: Correct Kconfig dependencies i7core_edac: return -ENODEV if no MC is found i7core_edac: use edac's own way to print errors MAINTAINERS: remove dropped edac_mce.* from the file i7core_edac: Drop the edac_mce facility x86, MCE: Use notifier chain only for MCE decoding EDAC i7core: Use mce socketid for better compatibility i7core_edac: Don't enable memory scrubbing for Xeon 35xx i7core_edac: Add scrubbing support edac: Move edac main structs to include/linux/edac.h i7core_edac: Fix oops when trying to inject errors ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-3.2' of git://linux-nfs.org/~bfields/linux: nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_access
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
* 'misc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: MAINTAINERS: Update entry for IA64 [IA64] gpio: GENERIC_GPIO default must be n [IA64[ add CONFIG_NET_VENDOR_INTEL=y to default config files where needed [IA64] agp/hp-agp: Allow binding user memory to the AGP GART [IA64] sn2: add missing put_cpu()
-
Linus Torvalds authored
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
-
Andrew Bresticker authored
While back-porting Johannes Weiner's patch "mm: memcg-aware global reclaim" for an internal effort, we noticed a significant performance regression during page-reclaim heavy workloads due to high contention of the ss->id_lock. This lock protects idr map, and serializes calls to idr_get_next() in css_get_next() (which is used during the memcg hierarchy walk). Since idr_get_next() is just doing a look up, we need only serialize it with respect to idr_remove()/idr_get_new(). By making the ss->id_lock a rwlock, contention is greatly reduced and performance improves. Tested: cat a 256m file from a ramdisk in a 128m container 50 times on each core (one file + container per core) in parallel on a NUMA machine. Result is the time for the test to complete in 1 of the containers. Both kernels included Johannes' memcg-aware global reclaim patches. Before rwlock patch: 1710.778s After rwlock patch: 152.227s Signed-off-by: Andrew Bresticker <abrestic@google.com> Cc: Paul Menage <menage@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Moyer authored
In testing aio on a fast storage device, I found that the context lock takes up a fair amount of cpu time in the I/O submission path. The reason is that we take it for every I/O submitted (see __aio_get_req). Since we know how many I/Os are passed to io_submit, we can preallocate the kiocbs in batches, reducing the number of times we take and release the lock. In my testing, I was able to reduce the amount of time spent in _raw_spin_lock_irq by .56% (average of 3 runs). The command I used to test this was: aio-stress -O -o 2 -o 3 -r 8 -d 128 -b 32 -i 32 -s 16384 <dev> I also tested the patch with various numbers of events passed to io_submit, and I ran the xfstests aio group of tests to ensure I didn't break anything. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Daniel Ehrenberg <dehrenberg@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rakib Mullick authored
Fix typo in code comment. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rakib Mullick authored
In vmballoon_reserve_page(), flags has been passed from the callee function (vmballoon_inflate here). So, we can determine can_sleep outside the loop. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Weitzel authored
Interrupting w1_delay() in w1_read_bit() results in missing the low level on the w1 line and receiving "1" instead of "0". Add local_irq_save()/local_irq_restore() around the critical section Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Faber authored
When using multiple masters, w1_int.c would use the .init_name from w1.c for all entities, which will fail when creating a corresponding sysfs entry. This patch uses the unique name previously generated. WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x48/0x64() sysfs: cannot create duplicate filename '/devices/w1 bus master' Modules linked in: Call trace: [<9001a604>] warn_slowpath_common+0x34/0x44 [<9001a64c>] warn_slowpath_fmt+0x14/0x18 [<90078020>] sysfs_add_one+0x48/0x64 [<900784ec>] create_dir+0x40/0x68 [<9007857a>] sysfs_create_dir+0x66/0x78 [<900c1a8a>] kobject_add_internal+0x6e/0x104 [<900c1bc0>] kobject_add_varg+0x20/0x2c [<900c1c1c>] kobject_add+0x30/0x3c [<900dbd66>] device_add+0x6a/0x378 [<900dbb4a>] device_initialize+0x12/0x48 [<900dc080>] device_register+0xc/0x10 [<900f99be>] w1_add_master_device+0x162/0x274 [<90008e7a>] w1_gpio_probe+0x66/0xb4 [<9000030c>] kernel_init+0x0/0xe8 [<900dde54>] platform_drv_probe+0xc/0xe [<9000030c>] kernel_init+0x0/0xe8 [<900dd4f8>] driver_probe_device+0x6c/0xdc [<900dd5fc>] __driver_attach+0x34/0x48 [<900dcce8>] bus_for_each_dev+0x2c/0x48 [<900dd5c8>] __driver_attach+0x0/0x48 [<900dd38c>] driver_attach+0x10/0x14 [<900dd16a>] bus_add_driver+0x6a/0x18c [<900dd768>] driver_register+0x60/0xb8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf48>] platform_driver_register+0x30/0x38 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf5e>] platform_driver_probe+0xe/0x3c [<90008e0c>] w1_gpio_init+0xc/0x14 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<900126d4>] do_one_initcall+0x34/0x130 [<90000372>] kernel_init+0x66/0xe8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<9001ca3e>] do_exit+0x0/0x3a6 [<9000030c>] kernel_init+0x0/0xe8 [<9001ca3e>] do_exit+0x0/0x3a6 ---[ end trace 5a9233884fead918 ]--- kobject_add_internal failed for w1 bus master with -EEXIST, don't try to register things with the same name in the same directory. Signed-off-by: Florian Faber <faber@faberman.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Clifton Barnes authored
Fixes the deadlock when inserting and removing the ds2780. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Clifton Barnes authored
Adds a nolock function to the w1 interface to avoid locking the mutex if needed. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Clifton Barnes authored
Simply creates one point to call the w1 interface. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Cameron authored
Straightforward. As an aside, the ida_init calls are not needed as far as I can see needed. (DEFINE_IDA does the same already). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Clifton Barnes <cabarnes@indesign-llc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
Add "depends on GENERIC_HARDIRQS" to avoid compile breakage on s390: drivers/built-in.o: In function `pps_gpio_remove': linux-next/drivers/pps/clients/pps-gpio.c:189: undefined reference to `free_irq' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Nuss <jamesnuss@nanometrics.ca> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
James Nuss authored
This client driver allows you to use a GPIO pin as a source for PPS signals. Platform data [1] are used to specify the GPIO pin number, label, assert event edge type, and whether clear events are captured. This driver is based on the work by Ricardo Martins who submitted an initial implementation [2] of a PPS IRQ client driver to the linuxpps mailing-list on Dec 3 2010. [1] include/linux/pps-gpio.h [2] http://ml.enneenne.com/pipermail/linuxpps/2010-December/004155.html [akpm@linux-foundation.org: remove unneeded cast of void*] Signed-off-by: James Nuss <jamesnuss@nanometrics.ca> Cc: Ricardo Martins <rasm@fe.up.pt> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Ricardo Martins <rasm@fe.up.pt> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
James Nuss authored
A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function. This allows some code re-use and also makes it easier to write client drivers since the default echo function does not normally need to change. Signed-off-by: James Nuss <jamesnuss@nanometrics.ca> Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Rodolfo Giometti <giometti@linux.it> Cc: Ricardo Martins <rasm@fe.up.pt> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Lots of driver code does a dma_alloc_coherent() and then zeroes out the memory with a memset. Make it easy for them. Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
WANG Cong authored
When I tried to send a patch to remove it, Andi told me we still need to keep compabitlies for old libc, so we can't remove this completely. Then just make it default to n and remove the doc from feature-removal-schedule.txt. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lucas De Marchi authored
Adding support for poll() in sysctl fs allows userspace to receive notifications of changes in sysctl entries. This adds a infrastructure to allow files in sysctl fs to be pollable and implements it for hostname and domainname. [akpm@linux-foundation.org: s/declare/define/ for definitions] Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Greg KH <gregkh@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Update rapidio.txt to reflect changes from recent patch. See http://marc.info/?l=linux-kernel&m=131285620113589&w=2 for details. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Liu Gang <Gang.Liu@freescale.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Modify Ethernet addess macros to be compatible with BE/LE platforms Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: <stable@kernel.org> [2.6.39+] Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
The "goto cleanup" path can deference "rswitch" when it is NULL. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Chul Kim <chul.kim@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device. The driver provides full set of callback functions defined for mport devices in RapidIO subsystem. It also is compatible with current version of RIONET driver (Ethernet over RapidIO messaging services). This patch is applicable to kernel versions starting from 2.6.39. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Liu Gang authored
arch/powerpc/sysdev/fsl_rio.c: release rapidio port I/O region resource if port failed to initialize The "struct rio_mport" contains a member of master port I/O memory resource structure "struct resource iores". This resource will be read from device tree and be used for rapidio R/W transaction memory space. Rapidio requests the port I/O memory resource under the root resource "iomem_resource". struct rio_mport *port; port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); request_resource(&iomem_resource, &port->iores); When port failed to initialize, allocated "rio_mport" structure memory will be freed, and the port I/O memory resource structure pointer "&port->iores" will be invalid. If other requests resource under "iomem_resource", "&port->iores" node may be operated in the child resources list and this will cause the system to crash. So the requested port I/O memory resource should be released before freeing allocated "rio_mport" structure. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-