- 13 Jun, 2023 5 commits
-
-
David Howells authored
Remove file->f_op->sendpage as splicing to a socket now calls sendmsg rather than sendpage. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Zahari Doychev says: ==================== net: flower: add cfm support The first patch adds cfm support to the flow dissector. The second adds the flower classifier support. The third adds a selftest for the flower cfm functionality. ==================== Link: https://lore.kernel.org/r/20230608105648.266575-1-zahari.doychev@linux.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zahari Doychev authored
New cfm flower test case is added to the net forwarding selfttests. Example output: # ./tc_flower_cfm.sh p1 p2 TEST: CFM opcode match test [ OK ] TEST: CFM level match test [ OK ] TEST: CFM opcode and level match test [ OK ] Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zahari Doychev authored
Add support to the tc flower classifier to match based on fields in CFM information elements like level and opcode. tc filter add dev ens6 ingress protocol 802.1q \ flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \ action drop Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zahari Doychev authored
Add support for dissecting cfm packets. The cfm packet header fields maintenance domain level and opcode can be dissected. Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Jun, 2023 35 commits
-
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Golle authored
Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet PHYs which require calibration data from the SoC's efuse. Despite the similar design the driver doesn't share any code with the existing mediatek-ge.c. Add support for such PHYs by introducing a new driver with basic support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-updates-2023-06-09 1) Embedded CPU Virtual Functions 2) Lightweight local SFs Daniel Jurgens says: ==================== Embedded CPU Virtual Functions This series enables the creation of virtual functions on Bluefield (the embedded CPU platform). Embedded CPU virtual functions (EC VFs). EC VF creation, deletion and management interfaces are the same as those for virtual functions in a server with a Connect-X NIC. When using EC VFs on the ARM the creation of virtual functions on the host system is still supported. Host VFs eswitch vports occupy a range of 1..max_vfs, the EC VF vport range is max_vfs+1..max_ec_vfs. Every function (PF, ECPF, VF, EC VF, and subfunction) has a function ID associated with it. Prior to this series the function ID and the eswitch vport were the same. That is no longer the case, the EC VF function ID range is 1..max_ec_vfs. When querying or setting the capabilities of an EC VF function an new bit must be set in the query/set HCA cap structure. This is a high level overview of the changes made: - Allocate vports for EC VFs if they are enabled. - Create representors and devlink ports for the EC VF vports. - When querying/setting HCA caps by vport break the assumption that function ID is the same a vport number and adjust accordingly. - Create a new type of page, so that when SRIOV on the ARM is disabled, but remains enabled on the host, the driver can wait for the correct pages. - Update SRIOV code to support EC VF creation/deletion. =================== Lightweight local SFs: Last 3 patches form Shay Drory: SFs are heavy weight and by default they come with the full package of ConnectX features. Usually users want specialized SFs for one specific purpose and using devlink users will almost always override the set of advertises features of an SF and reload it. Shay Drory says: ================ In order to avoid the wasted time and resources on the reload, local SFs will probe without any auxiliary sub-device, so that the SFs can be configured prior to its full probe. The defaults of the enable_* devlink params of these SFs are set to false. Usage example: Create SF: $ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11 $ devlink port function set pci/0000:08:00.0/32768 \ hw_addr 00:00:00:00:00:11 state active Enable ETH auxiliary device: $ devlink dev param set auxiliary/mlx5_core.sf.1 \ name enable_eth value true cmode driverinit Now, in order to fully probe the SF, use devlink reload: $ devlink dev reload auxiliary/mlx5_core.sf.1 At this point the user have SF devlink instance with auxiliary device for the Ethernet functionality only. ================
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: tx path fully headless This series completes transition of TCP stack tx path to headless packets : All payload now reside in page frags, never in skb->head. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Now all tcp_stream_alloc_skb() callers pass @size == 0, we can remove this parameter. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Now all skbs in write queue do not contain any payload in skb->head, we can remove some dead code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_send_syn_data() is the last component in TCP transmit path to put payload in skb->head. Switch it to use page frags, so that we can remove dead code later. This allows to put more payload than previous implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== net: support extack in dump and simplify ethtool uAPI Ethtool currently requires header nest to be always present even if it doesn't have to carry any attr for a given request. This inflicts unnecessary pain on the users. What makes it worse is that extack was not working in dump's ->start() callback. Address both of those issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Ethtool currently requires a header nest (which is used to carry the common family options) in all requests including dumps. $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get lib.ynl.NlError: Netlink error: Invalid argument nl_len = 64 (48) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'request header missing'} $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get \ --json '{"header":{}}'; ) [{'combined-count': 1, 'combined-max': 1, 'header': {'dev-index': 2, 'dev-name': 'enp1s0'}}] Requiring the header nest to always be there may seem nice from the consistency perspective, but it's not serving any practical purpose. We shouldn't burden the user like this. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 4a19edb6 ("netlink: Pass extack to dump handlers") added extack support to netlink dumps. It was focused on rtnl and since rtnl does not use ->start(), ->done() callbacks it ignored those. Genetlink on the other hand uses ->start() extensively, for parsing and input validation. Pass the extact in via struct netlink_dump_control and link it to cb for the time of ->start(). Both struct netlink_dump_control and extack itself live on the stack so we can't keep the same extack for the duration of the dump. This means that the extack visible in ->start() and each ->dump() callbacks will be different. Corner cases like reporting a warning message in DONE across dump calls are still not supported. We could put the extack (for dumps) in the socket struct, but layering makes it slightly awkward (extack pointer is decided before the DO / DUMP split). The genetlink dump error extacks are now surfaced: $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get lib.ynl.NlError: Netlink error: Invalid argument nl_len = 64 (48) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'request header missing'} Previously extack was missing: $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get lib.ynl.NlError: Netlink error: Invalid argument nl_len = 36 (20) nl_flags = 0x100 nl_type = 2 error: -22 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== tools: ynl: generate code for the ethtool family And finally ethtool support. Thanks to Stan's work the ethtool family spec is quite complete, so there is a lot of operations to support. I chickened out of stats-get support, they require at the very least type-value support on a u64 scalar. Type-value is an arrangement where a u16 attribute is encoded directly in attribute type. Code gen can support this if the inside is a nest, we just throw in an extra field into that nest to carry the attr type. But a little more coding is needed to for a scalar, because first we need to turn the scalar into a struct with one member, then we can add the attr type. Other than that ethtool required event support (notification which does not share contents with any GET), but the previous series already added that to the codegen. I haven't tested all the ops here, and a few I tried seem to work. ==================== Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Configuring / reading ring sizes and counts is a fairly common operation for ethtool netlink. Present a sample doing that with YNL: $ ./ethtool Channels: enp1s0: combined 1 eni1np1: combined 1 eni2np1: combined 1 Rings: enp1s0: rx 256 tx 256 eni1np1: rx 0 tx 0 eni2np1: rx 0 tx 0 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Generate the protocol code for ethtool. Skip the stats for now, they are the only outlier in terms of complexity. Stats are a sort-of semi-polymorphic (attr space of a nest depends on value of another attr) or a type-value-scalar, depending on how one wants to look at it... A challenge for another time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Pad is a separate type. Even though in practice they can only be a u32 the value should be discarded. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Code gen for stats is a bit of a challenge, but from looking at the attrs I think that the format isn't quite right. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
UDP tunnel and cable test messages have a lot of nests, which do not match the names of the enum entries in C uAPI. Some of the structure / nesting also looks wrong. Untangle this a little bit based on the names, comments and educated guesses, I haven't actually tested the results. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
C does not allow defining structures and enums with the same name. Since enum ethtool_stringset exists in the uAPI we need to include at least a stub of it in the spec. This will trigger name collision avoidance in the code gen. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Ethtool has an attribute set called stringset, from which we'll generate struct ethtool_stringset. Unfortunately, the old ethtool header declares enum ethtool_stringset (the same name), to which compilers object. This seems unavoidable. Check struct names against known constants and append an underscore if conflict is detected. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If attr set or enum has empty enum name we need to use u32 or int as function arguments and struct members. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Most of the C enum names are guessed correctly, but there is a handful of corner cases we need to name explicitly. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Ethtool's PSE PoDL has a attr nest with different prefixes: /* Power Sourcing Equipment */ enum { ETHTOOL_A_PSE_UNSPEC, ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */ ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */ ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */ Header has a prefix of ETHTOOL_A_PSE_ and other attrs prefix of ETHTOOL_A_PODL_PSE_ we can't cover them uniformly. If PODL was after PSE life would be easy. Now we either need to add prefixes to attr names which is yucky or support setting prefix name per attr. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
ynl-regen needs to know the arguments used to generate a file. Record excluded ops and, while at it, user headers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The ethtool family has a small handful of quite tricky ops and a lot of simple very useful ops. Teach ynl-gen to skip ops so that we can bypass the tricky ones. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Use the recently added of_property_read_reg() helper to get the untranslated "reg" address value. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexander Mikhalitsyn says: ==================== Add SCM_PIDFD and SO_PEERPIDFD 1. Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS, but it contains pidfd instead of plain pid, which allows programmers not to care about PID reuse problem. 2. Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd. This thing is direct analog of SO_PEERCRED which allows to get plain PID. 3. Add SCM_PIDFD / SO_PEERPIDFD kselftest Idea comes from UAPI kernel group: https://uapi-group.org/kernel-features/ Big thanks to Christian Brauner and Lennart Poettering for productive discussions about this and Luca Boccassi for testing and reviewing this. === Motivation behind this patchset Eric Dumazet raised a question: > It seems that we already can use pidfd_open() (since linux-5.3), and > pass the resulting fd in af_unix SCM_RIGHTS message ? Yes, it's possible, but it means that from the receiver side we need to trust the sent pidfd (in SCM_RIGHTS), or always use combination of SCM_RIGHTS+SCM_CREDENTIALS, then we can extract pidfd from SCM_RIGHTS, then acquire plain pid from pidfd and after compare it with the pid from SCM_CREDENTIALS. A few comments from other folks regarding this. Christian Brauner wrote: >Let me try and provide some of the missing background. >There are a range of use-cases where we would like to authenticate a >client through sockets without being susceptible to PID recycling >attacks. Currently, we can't do this as the race isn't fully fixable. >We can only apply mitigations. >What this patchset will allows us to do is to get a pidfd without the >client having to send us an fd explicitly via SCM_RIGHTS. As that's >already possibly as you correctly point out. >But for protocols like polkit this is quite important. Every message is >standalone and we would need to force a complete protocol change where >we would need to require that every client allocate and send a pidfd via >SCM_RIGHTS. That would also mean patching through all polkit users. >For something like systemd-journald where we provide logging facilities >and want to add metadata to the log we would also immensely benefit from >being able to get a receiver-side controlled pidfd. >With the message type we envisioned we don't need to change the sender >at all and can be safe against pid recycling. >Link: https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/154 >Link: https://uapi-group.org/kernel-features Lennart Poettering wrote: >So yes, this is of course possible, but it would mean the pidfd would >have to be transported as part of the user protocol, explicitly sent >by the sender. (Moreover, the receiver after receiving the pidfd would >then still have to somehow be able to prove that the pidfd it just >received actually refers to the peer's process and not some random >process. – this part is actually solvable in userspace, but ugly) >The big thing is simply that we want that the pidfd is associated >*implicity* with each AF_UNIX connection, not explicitly. A lot of >userspace already relies on this, both in the authentication area >(polkit) as well as in the logging area (systemd-journald). Right now >using the PID field from SO_PEERCREDS/SCM_CREDENTIALS is racy though >and very hard to get right. Making this available as pidfd too, would >solve this raciness, without otherwise changing semantics of it all: >receivers can still enable the creds stuff as they wish, and the data >is then implicitly appended to the connections/datagrams the sender >initiates. >Or to turn this around: things like polkit are typically used to >authenticate arbitrary dbus methods calls: some service implements a >dbus method call, and when an unprivileged client then issues that >call, it will take the client's info, go to polkit and ask it if this >is ok. If we wanted to send the pidfd as part of the protocol we >basically would have to extend every single method call to contain the >client's pidfd along with it as an additional argument, which would be >a massive undertaking: it would change the prototypes of basically >*all* methods a service defines… And that's just ugly. >Note that Alex' patch set doesn't expose anything that wasn't exposed >before, or attach, propagate what wasn't before. All it does, is make >the field already available anyway (the struct ucred .pid field) >available also in a better way (as a pidfd), to solve a variety of >races, with no effect on the protocol actually spoken within the >AF_UNIX transport. It's a seamless improvement of the status quo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Mikhalitsyn authored
Let's make CONFIG_UNIX a bool instead of a tristate. We've decided to do that during discussion about SCM_PIDFD patchset [1]. [1] https://lore.kernel.org/lkml/20230524081933.44dc8bea@kernel.org/ Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Mikhalitsyn authored
Basic test to check consistency between: - SCM_CREDENTIALS and SCM_PIDFD - SO_PEERCRED and SO_PEERPIDFD Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Mikhalitsyn authored
Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd. This thing is direct analog of SO_PEERCRED which allows to get plain PID. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Stanislav Fomichev <sdf@google.com> Cc: bpf@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Reviewed-by: Christian Brauner <brauner@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Tested-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Mikhalitsyn authored
Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS, but it contains pidfd instead of plain pid, which allows programmers not to care about PID reuse problem. We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because it depends on a pidfd_prepare() API which is not exported to the kernel modules. Idea comes from UAPI kernel group: https://uapi-group.org/kernel-features/ Big thanks to Christian Brauner and Lennart Poettering for productive discussions about this. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Cleanups in router code This patchset moves some router-related code from spectrum.c to spectrum_router.c where it should be. It also simplifies handlers of netevent notifications. - Patch #1 caches router pointer in a dedicated variable. This obviates the need to access the same as mlxsw_sp->router, making lines shorter, and permitting a future patch to add code that fits within 80 character limit. - Patch #2 moves IP / IPv6 validation notifier blocks from spectrum.c to spectrum_router, where the handlers are anyway. - In patch #3, pass router pointer to scheduler of deferred work directly, instead of having it deduce it on its own. - This makes the router pointer available in the handler function mlxsw_sp_router_netevent_event(), so in patch #4, use it directly, instead of finding it through mlxsw_sp_port. - In patch #5, extend mlxsw_sp_router_schedule_work() so that the NETEVENT_NEIGH_UPDATE handler can use it directly instead of inlining equivalent code. - In patches #6 and #7, add helpers for two common operations involving a backing netdev of a RIF. This makes it unnecessary for the function mlxsw_sp_rif_dev() to be visible outside of the router module, so in patch #8, hide it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Now that the external users of mlxsw_sp_rif_dev() have been converted in the preceding patches, make the function static. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In a number of places, a netdevice underlying a RIF is obtained only to compare it to another pointer. In order to clean up the interface between the router and the other modules, add a new helper to specifically answer this question, and convert the relevant uses to this new interface. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In a number of places, a netdevice underlying a RIF is obtained only to check if it a NULL pointer. In order to clean up the interface between the router and the other modules, add a new helper to specifically answer this question, and convert the relevant uses to this new interface. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
After the struct mlxsw_sp_netevent_work.n field initialization is moved here, the body of code that handles NETEVENT_NEIGH_UPDATE is almost identical to the one in the helper function. Therefore defer to the helper instead of inlining the equivalent. Note that previously, the code took and put a reference of the netdevice. The new code defers to mlxsw_sp_dev_lower_is_port() to obviate the need for taking the reference. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-