Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 591d2108 ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc:  <stable@vger.kernel.org> # v6.0+

This is only used locally, so mark it static to avoid a warning:

drivers/parport/parport_gsc.c:395:5: error: no previous prototype for 'parport_gsc_init' [-Werror=missing-prototypes]
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc:  <stable@vger.kernel.org>

Pull media updates from Mauro Carvalho Chehab:

 - the old V4L2 core videobuf kAPI was finally removed. All media
   drivers should now be using VB2 kAPI

 - new automotive driver: mgb4

 - new platform video driver: npcm-video

 - new sensor driver: mt9m114

 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge
   TI-specific parts

 - ir-rx51 was removed and the N900 DT binding was moved to the
   pwm-ir-tx generic driver

 - drop atomisp-specific ov5693, using the upstream driver instead

 - the camss driver has gained RDI3 support for VFE 17x

 - the atomisp driver now detects ISP2400 or ISP2401 at run time. No
   need to set it up at build time anymore

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
  media: venus: Fix firmware path for resources
  media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
  media: venus: hfi_parser: Add check to keep the number of codecs within range
  media: venus: hfi: add checks to handle capabilities from firmware
  media: venus: hfi: fix the check to handle session buffer requirement
  media: venus: hfi: add checks to perform sanity on queue pointers
  media: platform: cadence: select MIPI_DPHY dependency
  media: MAINTAINERS: Fix path for J721E CSI2RX bindings
  media: cec: meson: always include meson sub-directory in Makefile
  media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
  media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
  media: mediatek: vcodec: using encoder device to alloc/free encoder memory
  media: imx-jpeg: notify source chagne event when the first picture parsed
  media: cx231xx: Use EP5_BUF_SIZE macro
  media: siano: Drop unnecessary error check for debugfs_create_dir/file()
  media: mediatek: vcodec: Handle invalid encoder vsi
  media: aspeed: Drop unnecessary error check for debugfs_create_file()
  Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
  Documentation: media: gen-errors.rst: fix confusing ENOTTY description
  ...

Pull RTC updates from Alexandre Belloni:
 "There is a new driver for the RTC of the Mstar SSD202D SoC. The
  rtc7301 driver gains support for byte addresses to support the
  USRobotics USR8200. Then we have many non user visible changes and
  typo fixes.

  Summary:

  Subsytem:
   - convert platform drivers to remove_new
   - prevent modpost warnings for unremovable platform drivers

  New driver:
   - Mstar SSD202D

  Drivers:
   - brcmstb-waketimer: support level alarm_irq
   - ep93xx: add DT support
   - rtc7301: support byte-addressed IO"

* tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
  dt-bindings: rtc: Add Mstar SSD202D RTC
  rtc: Add support for the SSD202D RTC
  rtc: at91rm9200: annotate at91_rtc_remove with __exit again
  dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property
  dt-bindings: rtc: pcf8523: Convert to YAML
  dt-bindings: rtc: mcp795: move to trivial-rtc
  rtc: ep93xx: add DT support for Cirrus EP93xx
  dt-bindings: rtc: Add Cirrus EP93xx
  dt-bindings: rtc: pcf2123: convert to YAML
  rtc: efi: fixed typo in efi_procfs()
  rtc: omap: Use device_get_match_data()
  rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
  rtc: rtc7301: Support byte-addressed IO
  rtc: rtc7301: Rewrite bindings in schema
  rtc: sh: Convert to platform remove callback returning void
  rtc: pxa: Convert to platform remove callback returning void
  rtc: mv: Convert to platform remove callback returning void
  rtc: imxdi: Convert to platform remove callback returning void
  rtc: at91rm9200: Convert to platform remove callback returning void
  rtc: pcap: Drop no-op remove function
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for TX Doorbell v2

 - mtk: implement runtime PM

 - zynqmp: add destination mailbox compatible

 - qcom:
    - add another clock provider for IPQ
    - add SM8650 compatible

 - misc: use preferred device_get_match_data()

* tag 'mailbox-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller
  mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend
  mailbox: Use device_get_match_data()
  dt-bindings: zynqmp: add destination mailbox compatible
  dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
  mailbox: imx: support channel type tx doorbell v2
  dt-bindings: mailbox: fsl,mu: add new tx doorbell channel

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio,vdpa: features, fixes, cleanups.

  vdpa/mlx5:
   - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
   - new maintainer

  vdpa:
   - support for vq descriptor mappings
   - decouple reset of iotlb mapping from device reset

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vdpa_sim: implement .reset_map support
  vdpa/mlx5: implement .reset_map driver op
  vhost-vdpa: clean iotlb map during reset for older userspace
  vdpa: introduce .compat_reset operation callback
  vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
  vhost-vdpa: reset vendor specific mapping to initial state in .release
  vdpa: introduce .reset_map operation callback
  virtio_pci: add check for common cfg size
  virtio-blk: fix implicit overflow on virtio_max_dma_size
  virtio_pci: add build offset check for the new common cfg items
  virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
  vduse: make vduse_class constant
  vhost-scsi: Spelling s/preceeding/preceding/g
  virtio: kdoc for struct virtio_pci_modern_device
  vdpa: Update sysfs ABI documentation
  MAINTAINERS: Add myself as mlx5_vdpa driver
  virtio-balloon: correct the comment of virtballoon_migratepage()
  mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
  vdpa/mlx5: Update cvq iotlb mapping on ASID change
  vdpa/mlx5: Make iotlb helper functions more generic
  ...

Merge tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire update from Takashi Sakamoto:
 "A slight change for flexible length of array in core function.

  Kees Cook provides a patch to annotate the array embedded in fw_node
  structure referring to structure member for the length of array. The
  annotation would be defined by future extension of C compilers, and
  used for access bound-check at run-time enabled by UBSAN and
  FORTIFY_SOURCE"

* tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: Annotate struct fw_node with __counted_by

Pull i2c updates from Wolfram Sang:
 "I2C has largely driver updates for 6.7, i.e. feature additions (like
  adding transfers while in atomic mode), using new helpers (like
  devm_clk_get_enabled), new IDs, documentation fixes and additions...
  you name it.

  The core got a memleak fix and better support for nested muxes"

* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
  i2c: qcom-geni: add ACPI device id for sc8180x
  Documentation: i2c: add fault code for not supporting 10 bit addresses
  i2c: sun6i-p2wi: Prevent potential division by zero
  i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
  i2c: i801: Use new helper acpi_use_parent_companion
  ACPI: Add helper acpi_use_parent_companion
  MAINTAINERS: add YAML file for i2c-demux-pinctrl
  i2c: core: fix lockdep warning for sparsely nested adapter chain
  i2c: axxia: eliminate kernel-doc warnings
  dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
  i2c: stm32f7: Use devm_clk_get_enabled()
  i2c: stm32f4: Use devm_clk_get_enabled()
  i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
  i2c: fix memleak in i2c_new_client_device()
  i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
  i2c: i801: Simplify class-based client device instantiation
  i2c: exynos5: add support for atomic transfers
  i2c: at91-core: Use devm_clk_get_enabled()
  eeprom: at24: add ST M24C64-D Additional Write lockable page support
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - UBI Fastmap improvements

 - Minor issues found by static analysis bots in both UBI and UBIFS

 - Fix for wrong dentry length UBIFS in fscrypt mode

* tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted
  ubi: block: Fix use-after-free in ubiblock_cleanup
  ubifs: fix possible dereference after free
  ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools
  ubi: fastmap: Add module parameter to control reserving filling pool PEBs
  ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs
  ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out
  ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists
  ubi: fastmap: Remove unneeded break condition while filling pools
  ubi: fastmap: Wait until there are enough free PEBs before filling pools
  ubi: fastmap: Use free pebs reserved for bad block handling
  ubi: Replace erase_block() with sync_erase()
  ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap
  ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash
  ubi: fastmap: Fix missed ec updating after erasing old fastmap data block
  ubifs: Fix missing error code err
  ubifs: Fix memory leak of bud->log_hash
  ubifs: Fix some kernel-doc comments

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct fw_node.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: linux1394-devel@lists.sourceforge.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175334.work.335-kees@kernel.orgSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull i3c updates from Alexandre Belloni:
 "There are now more fixes because as stated in my previous pull
  request, people now have access to actual hardware.

  Core:

   - handle IBI in the proper order

  Drivers:

   - cdns: fix status register access

   - mipi-i3c-hci: many fixes now that the driver has been actually
     tested

   - svc: many IBI fixes, correct compatible string, fix hot join corner
     cases"

* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
  i3c: master: handle IBIs in order they came
  i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
  i3c: master: svc: fix compatibility string mismatch with binding doc
  i3c: master: svc: fix random hot join failure since timeout error
  i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
  i3c: master: svc: fix check wrong status register in irq handler
  i3c: master: svc: fix ibi may not return mandatory data byte
  i3c: master: svc: fix wrong data return when IBI happen during start frame
  i3c: master: svc: fix race condition in ibi work thread
  i3c: Fix typo "Provisional ID" to "Provisioned ID"
  i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
  i3c: mipi-i3c-hci: Resume controller after aborted transfer
  i3c: mipi-i3c-hci: Resume controller explicitly
  i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
  i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
  i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
  i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
  i3c: mipi-i3c-hci: Set ring start request together with enable
  i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
  i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
  ...

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The main new functionality this time is work to allow Linux to
  natively handle CXL link protocol errors signalled via PCIe AER for
  current generation CXL platforms. This required some enlightenment of
  the PCIe AER core to workaround the fact that current generation RCH
  (Restricted CXL Host) platforms physically hide topology details and
  registers via a mechanism called RCRB (Root Complex Register Block).

  The next major highlight is reworks to address bugs in parsing region
  configurations for next generation VH (Virtual Host) topologies. The
  old broken algorithm is replaced with a simpler one that significantly
  increases the number of region configurations supported by Linux. This
  is again relevant for error handling so that forward and reverse
  address translation of memory errors can be carried out by Linux for
  memory regions instantiated by platform firmware.

  As for other cross-tree work, the ACPI table parsing code has been
  refactored for reuse parsing the "CDAT" structure which is an
  ACPI-like data structure that is reported by CXL devices. That work is
  in preparation for v6.8 support for CXL QoS. Think of this as dynamic
  generation of NUMA node topology information generated by Linux rather
  than platform firmware.

  Lastly, a number of internal object lifetime issues have been resolved
  along with misc. fixes and feature updates (decoders_committed sysfs
  ABI).

  Summary:

   - Add support for RCH (Restricted CXL Host) Error recovery

   - Fix several region assembly bugs

   - Fix mem-device lifetime issues relative to the sanitize command and
     RCH topology.

   - Refactor ACPI table parsing for CDAT parsing re-use in preparation
     for CXL QOS support"

* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
  lib/fw_table: Remove acpi_parse_entries_array() export
  cxl/pci: Change CXL AER support check to use native AER
  cxl/hdm: Remove broken error path
  cxl/hdm: Fix && vs || bug
  acpi: Move common tables helper functions to common lib
  cxl: Add support for reading CXL switch CDAT table
  cxl: Add checksum verification to CDAT from CXL
  cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
  cxl: Add decoders_committed sysfs attribute to cxl_port
  cxl: Add cxl_decoders_committed() helper
  cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
  cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
  PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
  PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
  cxl/pci: Disable root port interrupts in RCH mode
  cxl/pci: Add RCH downstream port error logging
  cxl/pci: Map RCH downstream AER registers for logging protocol errors
  cxl/pci: Update CXL error logging to use RAS register address
  PCI/AER: Refactor cper_print_aer() for use by CXL driver module
  cxl/pci: Add RCH downstream port AER register discovery
  ...

Pull unified attestation reporting from Dan Williams:
 "In an ideal world there would be a cross-vendor standard attestation
  report format for confidential guests along with a common device
  definition to act as the transport.

  In the real world the situation ended up with multiple platform
  vendors inventing their own attestation report formats with the
  SEV-SNP implementation being a first mover to define a custom
  sev-guest character device and corresponding ioctl(). Later, this
  configfs-tsm proposal intercepted an attempt to add a tdx-guest
  character device and a corresponding new ioctl(). It also anticipated
  ARM and RISC-V showing up with more chardevs and more ioctls().

  The proposal takes for granted that Linux tolerates the vendor report
  format differentiation until a standard arrives. From talking with
  folks involved, it sounds like that standardization work is unlikely
  to resolve anytime soon. It also takes the position that kernfs ABIs
  are easier to maintain than ioctl(). The result is a shared configfs
  mechanism to return per-vendor report-blobs with the option to later
  support a standard when that arrives.

  Part of the goal here also is to get the community into the
  "uncomfortable, but beneficial to the long term maintainability of the
  kernel" state of talking to each other about their differentiation and
  opportunities to collaborate. Think of this like the device-driver
  equivalent of the common memory-management infrastructure for
  confidential-computing being built up in KVM.

  As for establishing an "upstream path for cross-vendor
  confidential-computing device driver infrastructure" this is something
  I want to discuss at Plumbers. At present, the multiple vendor
  proposals for assigning devices to confidential computing VMs likely
  needs a new dedicated repository and maintainer team, but that is a
  discussion for v6.8.

  For now, Greg and Thomas have acked this approach and this is passing
  is AMD, Intel, and Google tests.

  Summary:

   - Introduce configfs-tsm as a shared ABI for confidential computing
     attestation reports

   - Convert sev-guest to additionally support configfs-tsm alongside
     its vendor specific ioctl()

   - Added signed attestation report retrieval to the tdx-guest driver
     forgoing a new vendor specific ioctl()

   - Misc cleanups and a new __free() annotation for kvfree()"

* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
  virt: tdx-guest: Add Quote generation support using TSM_REPORTS
  virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
  mm/slab: Add __free() support for kvfree
  virt: sevguest: Prep for kernel internal get_ext_report()
  configfs-tsm: Introduce a shared ABI for attestation reports
  virt: coco: Add a coco/Makefile and coco/Kconfig
  virt: sevguest: Fix passing a stack buffer as a scatterlist target

Pull mtd updates from Miquel Raynal:
 "The main set of changes is related to Uwe's work converting platform
  remove callbacks to return void. Comes next (in number of changes)
  Kees' additional structures annotations to improve the sanitizers. The
  usual amount of cleanups apply.

  About the more substancial contribution, one main function of the
  partitions core could return an error which was not checked, this is
  now fixed. On the bindings side, fixed partitions can now have a
  compression property. Finally, an erroneous situation is now always
  avoided in the MAP RAM driver.

  CFI:

   - A several years old byte swap has been fixed.

  NAND:

   - The subsystem has, as usual, seen a bit of cleanup being done this
     cycle, typically return values of platform_get_irq() and
     devm_kasprintf(). There is also a better ECC check in the Arasan
     driver. This comes with smaller misc changes.

   - In the SPI-NAND world there is now support for Foresee F35SQA002G,
     Winbond W25N and XTX XT26 chips.

  SPI NOR:

   - For SPI NOR we cleaned the flash info entries in order to have them
     slimmer and self explanatory. In order to make the entries as slim
     as possible, we introduced sane default values so that the actual
     flash entries don't need to specify them. We now use a flexible
     macro to specify the flash ID instead of the previous INFOx()
     macros that had hardcoded ID lengths.

     Instead of:

         { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
                 OTP_INFO(256, 3, 0x1000, 0x1000) },

     We now use:

         .id = SNOR_ID(0xef, 0x80, 0x20),
         .name = "w25q512nwm",
         .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),

   - We also removed some flash entries: the very old Catalyst SPI
     EEPROMs that were introduced once with the SPI-NOR subsystem, and a
     Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
     even has device tree bindings for the at25 driver.

   - We made sure that the conversion didn't introduce any unwanted
     changes by comparing the .rodata segment before and after the
     conversion. The patches landed in linux-next immediately after
     v6.6-rc2, we haven't seen any regressions yet.

   - Apart of the autumn cleaning we introduced a new flash entry,
     at25ff321a, and added block protection support for mt25qu512a"

* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
  mtd: cfi_cmdset_0001: Byte swap OTP info
  mtd: rawnand: meson: check return value of devm_kasprintf()
  mtd: rawnand: intel: check return value of devm_kasprintf()
  mtd: rawnand: sh_flctl: Convert to module_platform_driver()
  mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
  mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
  mtd: rawnand: Remove unused of_gpio.h inclusion
  mtd: spinand: Add support for XTX XT26xxxDxxxxx
  mtd: spinand: winbond: add support for serial NAND flash
  mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
  mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
  mtd: spinand: add support for FORESEE F35SQA002G
  mtd: rawnand: rockchip: Use struct_size()
  mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
  mtd: Use device_get_match_data()
  mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
  mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
  mtd: maps: sun_uflash: Convert to platform remove callback returning void
  mtd: maps: sa1100-flash: Convert to platform remove callback returning void
  mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
  ...

Pull drm nouveau GSP support from Dave Airlie:
 "This adds the initial support for the NVIDIA GSP firmware to nouveau.

  This firmware is a new direction for Turing+ GPUs, and is only enabled
  by default on Ada generation. Other generations need to use
  nouveau.config=NvGspRm=1

  The GSP firmware takes nearly all the GPU init and power management
  tasks onto a risc-v CPU on the GPU.

  This series is mostly the work from Ben Skeggs, and Dave added some
  patches to rebase it to the latest firmware release which is where we
  will stay for as long as possible as the firmwares have no ABI
  stability"

* tag 'topic/nvidia-gsp-2023-11-03' of git://anongit.freedesktop.org/drm/drm: (49 commits)
  nouveau/gsp: add some basic registry entries.
  nouveau/gsp: fix message signature.
  nouveau/gsp: move to 535.113.01
  nouveau/disp: fix post-gsp build on 32-bit arm.
  nouveau: fix r535 build on 32-bit arm.
  drm/nouveau/ofa/r535: initial support
  drm/nouveau/nvjpg/r535: initial support
  drm/nouveau/nvenc/r535: initial support
  drm/nouveau/nvdec/r535: initial support
  drm/nouveau/gr/r535: initial support
  drm/nouveau/ce/r535: initial support
  drm/nouveau/fifo/r535: initial support
  drm/nouveau/disp/r535: initial support
  drm/nouveau/mmu/r535: initial support
  drm/nouveau/gsp/r535: add interrupt handling
  drm/nouveau/gsp/r535: add support for rm alloc
  drm/nouveau/gsp/r535: add support for rm control
  drm/nouveau/gsp/r535: add support for booting GSP-RM
  drm/nouveau/nvkm: support loading fws into sg_table
  drm/nouveau/kms/tu102-: disable vbios parsing when running on RM
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this cycle, we introduce a bigger page size support by changing the
  internal f2fs's block size aligned to the page size. We also continue
  to improve zoned block device support regarding the power off
  recovery. As usual, there are some bug fixes regarding the error
  handling routines in compression and ioctl.

  Enhancements:
   - Support Block Size == Page Size
   - let f2fs_precache_extents() traverses in file range
   - stop iterating f2fs_map_block if hole exists
   - preload extent_cache for POSIX_FADV_WILLNEED
   - compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()

  Bug fixes:
   - do not return EFSCORRUPTED, but try to run online repair
   - finish previous checkpoints before returning from remount
   - fix error handling of __get_node_page and __f2fs_build_free_nids
   - clean up zones when not successfully unmounted
   - fix to initialize map.m_pblk in f2fs_precache_extents()
   - fix to drop meta_inode's page cache in f2fs_put_super()
   - set the default compress_level on ioctl
   - fix to avoid use-after-free on dic
   - fix to avoid redundant compress extension
   - do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
   - fix deadloop in f2fs_write_cache_pages()"

* tag 'f2fs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: finish previous checkpoints before returning from remount
  f2fs: fix error handling of __get_node_page
  f2fs: do not return EFSCORRUPTED, but try to run online repair
  f2fs: fix error path of __f2fs_build_free_nids
  f2fs: Clean up errors in segment.h
  f2fs: clean up zones when not successfully unmounted
  f2fs: let f2fs_precache_extents() traverses in file range
  f2fs: avoid format-overflow warning
  f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
  f2fs: Support Block Size == Page Size
  f2fs: stop iterating f2fs_map_block if hole exists
  f2fs: preload extent_cache for POSIX_FADV_WILLNEED
  f2fs: set the default compress_level on ioctl
  f2fs: compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
  f2fs: fix to drop meta_inode's page cache in f2fs_put_super()
  f2fs: split initial and dynamic conditions for extent_cache
  f2fs: compress: fix to avoid redundant compress extension
  f2fs: compress: do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
  f2fs: compress: fix to avoid use-after-free on dic
  f2fs: compress: fix deadloop in f2fs_write_cache_pages()

Pull 9p updates from Dominique Martinet:
 A bunch of small fixes:

   - three W=1 warning fixes: the NULL -> "" replacement isn't trivial
     but is serialized identically by the protocol layer and has been
     tested

   - one syzbot/KCSAN datarace annotation where we don't care about
     users messing with the fd they passed to mount -t 9p

   - removing a declaration without implementation

   - yet another race fix for trans_fd around connection close: the
     'err' field is also used in potentially racy calls and this isn't
     complete, but it's better than what we had

   - and finally a theorical memory leak fix on serialization failure"

* tag '9p-for-6.7-rc1' of https://github.com/martinetd/linux:
  9p/net: fix possible memory leak in p9_check_errors()
  9p/fs: add MODULE_DESCRIPTION
  9p/net: xen: fix false positive printf format overflow warning
  9p: v9fs_listxattr: fix %s null argument warning
  9p/trans_fd: Annotate data-racy writes to file::f_flags
  fs/9p: Remove unused function declaration v9fs_inode2stat()
  9p/trans_fd: avoid sending req to a cancelled conn

Pull smb client updates from Steve French:

 - use after free fixes and deadlock fix

 - symlink timestamp fix

 - hashing perf improvement

 - multichannel fixes

 - minor debugging improvements

 - fix creating fifos when using "sfu" mounts

 - NTLMSSP authentication improvement

 - minor fixes to include some missing create flags and structures from
   recently updated protocol documentation

* tag '6.7-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: force interface update before a fresh session setup
  cifs: do not reset chan_max if multichannel is not supported at mount
  cifs: reconnect helper should set reconnect for the right channel
  smb: client: fix use-after-free in smb2_query_info_compound()
  smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
  cifs: add xid to query server interface call
  cifs: print server capabilities in DebugData
  smb: use crypto_shash_digest() in symlink_hash()
  smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
  smb: client: fix potential deadlock when releasing mids
  smb3: fix creating FIFOs when mounting with "sfu" mount option
  Add definition for new smb3.1.1 command type
  SMB3: clarify some of the unused CreateOption flags
  cifs: Add client version details to NTLM authenticate message
  smb3: fix touch -h of symlink

Pull EFI update from Ard Biesheuvel:
 "This is the only remaining EFI change, as everything else was taken
  via -tip this cycle:

   - implement uid/gid mount options for efivarfs"

* tag 'efi-next-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efivarfs: Add uid/gid mount options

Document the Inter-Processor Communication Controller on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull x86 microcode loading updates from Borislac Petkov:
 "Major microcode loader restructuring, cleanup and improvements by
  Thomas Gleixner:

   - Restructure the code needed for it and add a temporary initrd
     mapping on 32-bit so that the loader can access the microcode
     blobs. This in itself is a preparation for the next major
     improvement:

   - Do not load microcode on 32-bit before paging has been enabled.

     Handling this has caused an endless stream of headaches, issues,
     ugly code and unnecessary hacks in the past. And there really
     wasn't any sensible reason to do that in the first place. So switch
     the 32-bit loading to happen after paging has been enabled and turn
     the loader code "real purrty" again

   - Drop mixed microcode steppings loading on Intel - there, a single
     patch loaded on the whole system is sufficient

   - Rework late loading to track which CPUs have updated microcode
     successfully and which haven't, act accordingly

   - Move late microcode loading on Intel in NMI context in order to
     guarantee concurrent loading on all threads

   - Make the late loading CPU-hotplug-safe and have the offlined
     threads be woken up for the purpose of the update

   - Add support for a minimum revision which determines whether late
     microcode loading is safe on a machine and the microcode does not
     change software visible features which the machine cannot use
     anyway since feature detection has happened already. Roughly, the
     minimum revision is the smallest revision number which must be
     loaded currently on the system so that late updates can be allowed

   - Other nice leanups, fixess, etc all over the place"

* tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  x86/microcode/intel: Add a minimum required revision for late loading
  x86/microcode: Prepare for minimal revision check
  x86/microcode: Handle "offline" CPUs correctly
  x86/apic: Provide apic_force_nmi_on_cpu()
  x86/microcode: Protect against instrumentation
  x86/microcode: Rendezvous and load in NMI
  x86/microcode: Replace the all-in-one rendevous handler
  x86/microcode: Provide new control functions
  x86/microcode: Add per CPU control field
  x86/microcode: Add per CPU result state
  x86/microcode: Sanitize __wait_for_cpus()
  x86/microcode: Clarify the late load logic
  x86/microcode: Handle "nosmt" correctly
  x86/microcode: Clean up mc_cpu_down_prep()
  x86/microcode: Get rid of the schedule work indirection
  x86/microcode: Mop up early loading leftovers
  x86/microcode/amd: Use cached microcode for AP load
  x86/microcode/amd: Cache builtin/initrd microcode early
  x86/microcode/amd: Cache builtin microcode too
  x86/microcode/amd: Use correct per CPU ucode_cpu_info
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Implement the binary search in modpost for faster symbol lookup

 - Respect HOSTCC when linking host programs written in Rust

 - Change the binrpm-pkg target to generate kernel-devel RPM package

 - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE

 - Unify vdso_install rules

 - Remove unused __memexit* annotations

 - Eliminate stale whitelisting for __devinit/__devexit from modpost

 - Enable dummy-tools to handle the -fpatchable-function-entry flag

 - Add 'userldlibs' syntax

* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: support 'userldlibs' syntax
  kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
  kbuild: Correct missing architecture-specific hyphens
  modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
  modpost: merge sectioncheck table entries regarding init/exit sections
  modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
  modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
  modpost: remove EXIT_SECTIONS macro
  modpost: remove MEM_INIT_SECTIONS macro
  modpost: remove more symbol patterns from the section check whitelist
  modpost: disallow *driver to reference .meminit* sections
  linux/init: remove __memexit* annotations
  modpost: remove ALL_EXIT_DATA_SECTIONS macro
  kbuild: simplify cmd_ld_multi_m
  kbuild: avoid too many execution of scripts/pahole-flags.sh
  kbuild: remove ARCH_POSTLINK from module builds
  kbuild: unify no-compiler-targets and no-sync-config-targets
  kbuild: unify vdso_install rules
  docs: kbuild: add INSTALL_DTBS_PATH
  UML: remove unused cmd_vdso_install
  ...

Pull ACPI fix from Rafael Wysocki:
 "Fix the acpi_thermal_add() error path that may do a double-free in
  some cases after recent changes (Dan Carpenter)"

* tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup

The raw NAND subsystem has, as usual, seen a bit of cleanup being done
this cycle, typically return values of platform_get_irq() and
devm_kasprintf(), plus structure annotations for sanitizers. There is
also a better ECC check in the Arasan driver. This comes with smaller
misc changes.

In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

For SPI NOR we cleaned the flash info entries in order to have
them slimmer and self explanatory. In order to make the entries
as slim as possible, we introduced sane default values so that
the actual flash entries don't need to specify them. We now use
a flexible macro to specify the flash ID instead of the previous
INFOx() macros that had hardcoded ID lengths.

Instead of:
-       { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
-               OTP_INFO(256, 3, 0x1000, 0x1000) },

We now use:
+               .id = SNOR_ID(0xef, 0x80, 0x20),
+               .name = "w25q512nwm",
+               .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),

We also removed some flash entries: the very old Catalyst
SPI EEPROMs that were introduced once with the SPI-NOR subsystem,
and a Fujitsu MRAM. Both should use the at25 EEPROM driver.
The latter even has device tree bindings for the at25 driver.

We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.

Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Pull pin control updates from Linus Walleij:
 "No pin control core changes this time.

  New drivers:

   - Realtek RTD family pin control driver and RTD1619B, RTD1319D and
     RTD1315E subdrivers

   - Nuvoton NPCM8xx combined pin control and GPIO driver

   - Amlogic T7 pin control driver

   - Renesas RZ/G3S pin control driver

  Improvements:

   - A number of additional UART groups added to the Mediatek MT7981
     driver

   - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660

   - Extra GPIO banks for the Sunxi H616

   - MLSP I2C6 function support in Qualcomm MSM8226

   - Some __counted_by() annotations for dynamic arrays

   - Ongoing work to make remove() return void

   - LSBC groups and functions in the Renesas R8A7778"

* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
  pinctrl: Use device_get_match_data()
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
  dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
  dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
  pinctrl: renesas: rzn1: Convert to platform remove callback returning void
  pinctrl: renesas: rzg2l: Add RZ/G3S support
  dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
  pinctrl: renesas: rzg2l: Add support for different DS values on different groups
  pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
  pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
  pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
  pinctrl: renesas: rzg2l: Index all registers based on port offset
  pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
  pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
  pinctrl: intel: fetch community only when we need it
  pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
  pinctrl: cherryview: Convert to platform remove callback returning void
  pinctrl: sprd-sc9860: Convert to platform remove callback returning void
  pinctrl: qcom/msm: Convert to platform remove callback returning void
  pinctrl: qcom/lpi: Convert to platform remove callback returning void
  ...

Pull soundwire updates from Vinod Koul:

 - Core now has improved handling of errors for clock stop

 - Support for qcom v2.0.0 status registers and command ignored
   interrupt and more logging for failures

 - DMI quirk for HP Omen machine

* tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: dmi-quirks: update HP Omen match
  soundwire: bus: improve error handling for clock stop prepare/deprepare
  soundwire: qcom: Log clk_get("iface") failures
  soundwire: qcom: handle command ignored interrupt
  soundwire: qcom: use newer link status tregister on v2.0.0

Pull generic phy updates from Vinod Koul:
 "New Support:
   - Qualcomm sa8775p qmp-pcie, IPQ5018, and SC7280 qmp-ufs support
   - Mediatek MT8188 support

  Updates:
   - Device tree device_get_match_data() usage and dropping
     of_match_device() calls
   - Qualcomm qmp usb and combo phy updates for v6 register layout
   - Qualcomm eusb2-repeater updates for tuning overrides, regmap fields
   - STih407 usb binding and ralink usb-phy yaml conversion
   - renesas r8a779f0 serdes init sequencing updates"

* tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (32 commits)
  phy: Remove duplicated include in phy-ralink-usb.c
  phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHY
  phy: qcom-qmp-pcie: add endpoint support for sa8775p
  dt-bindings: phy: ralink-usb-phy: convert to dtschema
  dt-bindings: phy: Convert PXA1928 USB/HSIC PHY to DT schema
  phy: Drop unnecessary of_match_device() calls
  phy: rockchip-inno-usb2: Drop unnecessary DT includes
  phy: Use device_get_match_data()
  phy: realtek: Replace of_device.h with explicit includes
  phy: renesas: r8a779f0-ether-serdes: Add .exit() ops
  phy: renesas: r8a779f0-ether-serdes: Reset in .init()
  phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  phy: qcom-qmp-usb: move PCS v6 register to the proper header
  phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers
  phy: sun4i-usb: update array size
  phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides
  phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs
  phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields
  dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides
  dt-bindings: phy: Add compatible for Mediatek MT8188
  ...

Pull dmaengine updates from Vinod Koul:

 - Big pile of __counted_by attribute annotations to several structures
   for bounds checking of flexible arrays at run-time

 - Another big pile platform remove callback returning void changes

 - Device tree device_get_match_data() usage and dropping
   of_match_device() calls

 - Minor driver updates to pxa, idxd fsl, hisi etc drivers

* tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits)
  dmaengine: stm32-mdma: correct desc prep when channel running
  dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16
  dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove()
  dmaengine: mmp_tdma: drop unused variable 'of_id'
  MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers
  dmaengine: xilinx: xdma: Support cyclic transfers
  dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers
  dmaengine: Drop unnecessary of_match_device() calls
  dmaengine: Use device_get_match_data()
  dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by
  dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
  dmaengine: xilinx: xdma: Use resource_size() in xdma_probe()
  dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver
  dmaengine: Remove unused declaration dma_chan_cleanup()
  dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning
  dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning
  dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq()
  dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by
  dmaengine: idxd: add wq driver name support for accel-config user tool
  dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by
  ...

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 6.7-rc1. A bit
  bigger than 6.6 this time around, as it coincided with the Outreachy
  and mentorship application process, so we got a bunch of new
  developers sending in their first changes, which is nice to see.

  Also in here is a removal of the qlge ethernet driver, and the
  rtl8192u wireless driver. Both of these were very old and no one was
  maintaining them, the wireless driver removal was due to no one using
  it anymore, and no hardware to be found, and is part of a larger
  effort to remove unused and old wifi drivers from the system.

  The qlge ethernet driver did have one user pop up after it was
  dropped, and we are working with the network mainainers to figure out
  what tree it will come back in from and who will be responsible for
  it, and if it really is being used or not. Odds are it will show up in
  a network subsystem pull request after -rc1 is out, but we aren't sure
  yet.

  Other smaller changes in here are:

   - Lots of vc04_services work by Umang to clean up the mess created by
     the rpi developers long ago, bringing it almost into good enough
     shape to get out of staging, hopefully next major release, it's
     getting close.

   - rtl8192e variable cleanups and removal of unused code and
     structures

   - vme_user coding style cleanups

   - other small coding style cleanups to lots of the staging drivers

   - octeon typedef removals, and then last-minute revert when it was
     found to break the build in some configurations (it's a hard driver
     to build properly, none of the normal automated testing catches
     it.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
  Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
  Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
  Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
  staging: vt6655: Type encoding info dropped from variable name "byRxRate"
  staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
  staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
  staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
  staging: vt6655: Type encoding info dropped from variable name "byPacketType"
  staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
  staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
  staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
  staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
  staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
  staging: fbtft: Convert to platform remove callback returning void
  staging: olpc_dcon: Remove I2C_CLASS_DDC support
  staging: vc04_services: use snprintf instead of sprintf
  staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
  ...

Pull driver core updates from Greg KH:
 "Here is the set of driver core updates for 6.7-rc1. Nothing major in
  here at all, just a small number of changes including:

   - minor cleanups and updates from Andy Shevchenko

   - __counted_by addition

   - firmware_loader update for aborting loads cleaner

   - other minor changes, details in the shortlog

   - documentation update

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  firmware_loader: Abort all upcoming firmware load request once reboot triggered
  firmware_loader: Refactor kill_pending_fw_fallback_reqs()
  Documentation: security-bugs.rst: linux-distros relaxed their rules
  driver core: Release all resources during unbind before updating device links
  driver core: class: remove boilerplate code
  driver core: platform: Annotate struct irq_affinity_devres with __counted_by
  resource: Constify resource crosscheck APIs
  resource: Unify next_resource() and next_resource_skip_children()
  resource: Reuse for_each_resource() macro
  PCI: Implement custom llseek for sysfs resource entries
  kernfs: sysfs: support custom llseek method for sysfs entries
  debugfs: Fix __rcu type comparison warning
  device property: Replace custom implementation of COUNT_ARGS()
  drivers: base: test: Make property entry API test modular
  driver core: Add missing parameter description to __fwnode_link_add()
  device property: Clarify usage scope of some struct fwnode_handle members
  devres: rename the first parameter of devm_add_action(_or_reset)
  driver core: platform: Unify the firmware node type check
  driver core: platform: Use temporary variable in platform_device_add()
  driver core: platform: Refactor error path in a couple places
  ...

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.7-rc1. Included in here are:

   - IIO subsystem driver updates and additions (largest part of this
     pull request)

   - FPGA subsystem driver updates

   - Counter subsystem driver updates

   - ICC subsystem driver updates

   - extcon subsystem driver updates

   - mei driver updates and additions

   - nvmem subsystem driver updates and additions

   - comedi subsystem dependency fixes

   - parport driver fixups

   - cdx subsystem driver and core updates

   - splice support for /dev/zero and /dev/full

   - other smaller driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
  cdx: add sysfs for subsystem, class and revision
  cdx: add sysfs for bus reset
  cdx: add support for bus enable and disable
  cdx: Register cdx bus as a device on cdx subsystem
  cdx: Create symbol namespaces for cdx subsystem
  cdx: Introduce lock to protect controller ops
  cdx: Remove cdx controller list from cdx bus system
  dts: ti: k3-am625-beagleplay: Add beaglecc1352
  greybus: Add BeaglePlay Linux Driver
  dt-bindings: net: Add ti,cc1352p7
  dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
  dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
  Revert "nvmem: add new config option"
  MAINTAINERS: coresight: Add missing Coresight files
  misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
  firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
  uacce: make uacce_class constant
  ocxl: make ocxl_class constant
  cxl: make cxl_class constant
  misc: phantom: make phantom_class constant
  ...

IBI shall be handled in order they appear on the bus. Otherwise could hit
case when order of handling them in device driver will be different. It may
lead to invalid assembling fragmented packets or events order broken.

Added separate workqueue with option WQ_MEM_RECLAIM for each device driver.
This ensures IBI handling order and improves IBI handling performance: IBI
handlers for device B are not blocked by IBI handlers for device A.

Original solution (single workqueue in main driver) was able to handle also
general IBI (not related to specific device) like HJ or MR. So leaving this
for such purposes.
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231015222334.1652401-2-zbigniew.lukwinski@linux.intel.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull s390 updates from Vasily Gorbik:

 - Get rid of private VM_FAULT flags

 - Add word-at-a-time implementation

 - Add DCACHE_WORD_ACCESS support

 - Cleanup control register handling

 - Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
   following a similar restriction in x86

 - Optimize pai crypto map allocation

 - Update the list of crypto express EP11 coprocessor operation modes

 - Fixes and improvements for secure guests AP pass-through

 - Several fixes to address incorrect page marking for address
   translation with the "cmma no-dat" feature, preventing potential
   incorrect guest TLB flushes

 - Fix early IPI handling

 - Several virtual vs physical address confusion fixes

 - Various small fixes and improvements all over the code

* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
  s390/cio: replace deprecated strncpy with strscpy
  s390/sclp: replace deprecated strncpy with strtomem
  s390/cio: fix virtual vs physical address confusion
  s390/cio: export CMG value as decimal
  s390: delete the unused store_prefix() function
  s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
  s390/cmma: fix detection of DAT pages
  s390/sclp: handle default case in sclp memory notifier
  s390/pai_crypto: remove per-cpu variable assignement in event initialization
  s390/pai: initialize event count once at initialization
  s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
  s390/mm: add missing arch_set_page_dat() call to gmap allocations
  s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
  s390/cmma: fix initial kernel address space page table walk
  s390/diag: add missing virt_to_phys() translation to diag224()
  s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
  s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
  s390/mm,fault: remove VM_FAULT_SIGNAL
  s390/mm,fault: remove VM_FAULT_BADCONTEXT
  s390/mm,fault: simplify kfence fault handling
  ...

Pull powerpc updates from Michael Ellerman:

 - Add support for KVM running as a nested hypervisor under development
   versions of PowerVM, using the new PAPR nested virtualisation API

 - Add support for the BPF prog pack allocator

 - A rework of the non-server MMU handling to support execute-only on
   all platforms

 - Some optimisations & cleanups for the powerpc qspinlock code

 - Various other small features and fixes

Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.

* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
  powerpc/vmcore: Add MMU information to vmcoreinfo
  Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
  powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
  powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
  powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
  powerpc/bpf: implement bpf_arch_text_copy
  powerpc/code-patching: introduce patch_instructions()
  powerpc/32s: Implement local_flush_tlb_page_psize()
  powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
  powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
  powerpc/fsl_msi: Use device_get_match_data()
  powerpc: Remove cpm_dp...() macros
  powerpc/qspinlock: Rename yield_propagate_owner tunable
  powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
  powerpc/qspinlock: don't propagate the not-sleepy state
  powerpc/qspinlock: propagate owner preemptedness rather than CPU number
  powerpc/qspinlock: stop queued waiters trying to set lock sleepy
  powerpc/perf: Fix disabling BHRB and instruction sampling
  powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
  powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
  ...

Merge tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "This adds initial support for mediating io_uring and userns creation.
  Adds a new restriction that tightens the use of change_profile, and a
  couple of optimizations to reduce performance bottle necks that have
  been found when retrieving the current task's secid and allocating
  work buffers.

  The majority of the patch set continues cleaning up and simplifying
  the code (fixing comments, removing now dead functions, and macros
  etc). Finally there are 4 bug fixes, with the regression fix having
  had a couple months of testing.

  Features:
   - optimize retrieving current task secid
   - add base io_uring mediation
   - add base userns mediation
   - improve buffer allocation
   - allow restricting unprivilege change_profile

  Cleanups:
   - Fix kernel doc comments
   - remove unused declarations
   - remove unused functions
   - remove unneeded #ifdef
   - remove unused macros
   - mark fns static
   - cleanup fn with unused return values
   - cleanup audit data
   - pass cred through to audit data
   - refcount the pdb instead of using duplicates
   - make SK_CTX macro an inline fn
   - some comment cleanups

  Bug fixes:
   - fix regression in mount mediation
   - fix invalid refenece
   - use passed in gfp flags
   - advertise avaiability of extended perms and disconnected.path"

* tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (39 commits)
  apparmor: Fix some kernel-doc comments
  apparmor: Fix one kernel-doc comment
  apparmor: Fix some kernel-doc comments
  apparmor: mark new functions static
  apparmor: Fix regression in mount mediation
  apparmor: cache buffers on percpu list if there is lock contention
  apparmor: add io_uring mediation
  apparmor: add user namespace creation mediation
  apparmor: allow restricting unprivileged change_profile
  apparmor: advertise disconnected.path is available
  apparmor: refcount the pdb
  apparmor: provide separate audit messages for file and policy checks
  apparmor: pass cred through to audit info.
  apparmor: rename audit_data->label to audit_data->subj_label
  apparmor: combine common_audit_data and apparmor_audit_data
  apparmor: rename SK_CTX() to aa_sock and make it an inline fn
  apparmor: Optimize retrieving current task secid
  apparmor: remove unused functions in policy_ns.c/.h
  apparmor: remove unneeded #ifdef in decompress_zstd()
  apparmor: fix invalid reference on profile->disconnected
  ...