- 08 Jul, 2020 1 commit
-
-
Dmitry Bogdanov authored
This patch fixes ip dst and ipv6 address filters. There were 2 mistakes in the code, which led to the issue: * invalid register was used for ipv4 dst address; * incorrect write order of dwords for ipv6 addresses. Fixes: 23e7a718 ("net: aquantia: add rx-flow filter definitions") Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 07 Jul, 2020 18 commits
-
-
Shannon Nelson authored
The queue reset pattern is used in a couple different places, only slightly different from each other, and could cause issues if one gets changed and the other didn't. This puts them together so that only one version is needed, yet each can have slighty different effects by passing in a pointer to a work function to do whatever configuration twiddling is needed in the middle of the reset. This specifically addresses issues seen where under loops of changing ring size or queue count parameters we could occasionally bump into the netdev watchdog. v2: added more commit message commentary Fixes: 4d03e00a ("ionic: Add initial ethtool support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Toke Høiland-Jørgensen authored
Toshiaki pointed out that we now have two very similar functions to extract the L3 protocol number in the presence of VLAN tags. And Daniel pointed out that the unbounded parsing loop makes it possible for maliciously crafted packets to loop through potentially hundreds of tags. Fix both of these issues by consolidating the two parsing functions and limiting the VLAN tag parsing to a max depth of 8 tags. As part of this, switch over __vlan_get_protocol() to use skb_header_pointer() instead of pskb_may_pull(), to avoid the possible side effects of the latter and keep the skb pointer 'const' through all the parsing functions. v2: - Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT) Reported-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Fixes: d7bf2ebe ("sched: consistently handle layer3 header accesses in the presence of VLANs") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Alexander Lobakin authored
When generating debug dump, driver firstly collects all data in binary form, and then performs per-feature formatting to human-readable if it is supported. For ethtool -d, this is roughly incorrect for two reasons. First of all, drivers should always provide only original raw dumps to Ethtool without any changes. The second, and more critical, is that Ethtool's output buffer size is strictly determined by ethtool_ops::get_regs_len(), and all data *must* fit in it. The current version of driver always returns the size of raw data, but the size of the formatted buffer exceeds it in most cases. This leads to out-of-bound writes and memory corruption. Address both issues by adding an option to return original, non-formatted debug data, and using it for Ethtool case. v2: - Expand commit message to make it more clear; - No functional changes. Fixes: c965db44 ("qed: Add support for debug data collection") Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Linus Lüssing authored
Commit e57f6185 ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling") introduced a bug in the IPv6 header payload length check which would potentially lead to rejecting a valid MLD2 Report: The check needs to take into account the 2 bytes for the "Number of Sources" field in the "Multicast Address Record" before reading it. And not the size of a pointer to this field. Fixes: e57f6185 ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling") Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Martin Varghese authored
The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23c ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
wenxu authored
When tcf_ct_act execute the tcf_lastuse_update should be update or the used stats never update filter protocol ip pref 3 flower chain 0 filter protocol ip pref 3 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 1.1.1.1 ip_flags frag/firstfrag skip_hw not_in_hw action order 1: ct zone 1 nat pipe index 1 ref 1 bind 1 installed 103 sec used 103 sec Action statistics: Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 cookie 4519c04dc64a1a295787aab13b6a50fb Signed-off-by:
wenxu <wenxu@ucloud.cn> Signed-off-by:
-
Sebastian Andrzej Siewior authored
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Fixes: 549c243e ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
The RFC 8684 mandates that no-data DATA FIN packets should carry a DSS with 0 sequence number and data len equal to 1. Currently, on FIN retransmission we re-use the existing mapping; if the previous fin transmission was part of a partially acked data packet, we could end-up writing in the egress packet a non-compliant DSS. The above will be detected by a "Bad mapping" warning on the receiver side. This change addresses the issue explicitly checking for 0 len packet when adding the DATA_FIN option. Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets") Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com Tested-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Sabrina Dubroca authored
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to incomplete IPsec ACQUIRE messages being sent to userspace. Currently, both raw sockets and IPv6 ping sockets set those fields. Expected output of "ip xfrm monitor": acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> Currently with ping sockets: acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> The Libreswan test suite found this problem after Fedora changed the value for the sysctl net.ipv4.ping_group_range. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:Paul Wouters <pwouters@redhat.com> Tested-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Tobias Waldekranz authored
In the ISR, we poll the event register for the queues in need of service and then enter polled mode. After this point, the event register will never be read again until we exit polled mode. In a scenario where a UDP flow is routed back out through the same interface, i.e. "router-on-a-stick" we'll typically only see an rx queue event initially. Once we start to process the incoming flow we'll be locked polled mode, but we'll never clean the tx rings since that event is never caught. Eventually the netdev watchdog will trip, causing all buffers to be dropped and then the process starts over again. Rework the NAPI poll to keep trying to consome the entire budget as long as new events are coming in, making sure to service all rx/tx queues, in priority order, on each pass. Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue") Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Tested-by:
Fugang Duan <fugang.duan@nxp.com> Reviewed-by:
-
Tom Rix authored
clang static analysis flags this garbage return drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~ static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; } __gm_phy_read can return without setting v. So handle similar to skge.c's gm_phy_read, initialize v. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Cong Wang authored
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is copied, so the cgroup refcnt must be taken too. And, unlike the sk_alloc() path, sock_update_netprioidx() is not called here. Therefore, it is safe and necessary to grab the cgroup refcnt even when cgroup_sk_alloc is disabled. sk_clone_lock() is in BH context anyway, the in_interrupt() would terminate this function if called there. And for sk_alloc() skcd->val is always zero. So it's safe to factor out the code to make it more readable. The global variable 'cgroup_sk_alloc_disabled' is used to determine whether to take these reference counts. It is impossible to make the reference counting correct unless we save this bit of information in skcd->val. So, add a new bit there to record whether the socket has already taken the reference counts. This obviously relies on kmalloc() to align cgroup pointers to at least 4 bytes, ARCH_KMALLOC_MINALIGN is certainly larger than that. This bug seems to be introduced since the beginning, commit d979a39d ("cgroup: duplicate cgroup reference when cloning sockets") tried to fix it but not compeletely. It seems not easy to trigger until the recent commit 090e28b2 ("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged. Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Reported-by:
Cameron Berkenpas <cam@neo-zeon.de> Reported-by:
Peter Geis <pgwipeout@gmail.com> Reported-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reported-by:
Daniël Sonck <dsonck92@gmail.com> Reported-by:
Zhang Qiang <qiang.zhang@windriver.com> Tested-by:
Thomas Lamprecht <t.lamprecht@proxmox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Zefan Li <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David Ahern authored
Thomas reported a regression with IPv6 and anycast using the following reproducer: echo 1 > /proc/sys/net/ipv6/conf/all/forwarding ip -6 a add fc12::1/16 dev lo sleep 2 echo "pinging lo" ping6 -c 2 fc12:: The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed the use of fib6_is_reject which checks addresses added to the loopback interface and sets the REJECT flag as needed. Update fib6_is_reject for loopback checks to handle RTF_ANYCAST addresses. Fixes: c7a1ce39 ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create") Reported-by: thomas.gambier@nexedi.com Signed-off-by:David Ahern <dsahern@kernel.org> Signed-off-by:
-
AceLan Kao authored
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: fix warning-reported errors Building the kernel with W=1 produces numerous warnings for the IPA code. Some of those warnings turn out to flag real problems, and this series fixes them. The first patch fixes the most important ones, but the second and third are problems I think are worth treating as bugs as well. Note: I'll happily combine any of these if someone prefers that. ==================== Signed-off-by: -
Alex Elder authored
Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are defined before they are used in "ipa_gsi.c". This addresses some warnings that are reported with a "W=1" build. Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Pointers to two struct types are used in "ipa_gsi.h", without those struct types being forward-declared. Add these declarations. Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by:
-
Alex Elder authored
Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216 ("soc: qcom: ipa: AP/modem communications") Signed-off-by:
-
- 06 Jul, 2020 10 commits
-
-
David Ahern authored
Brian reported a crash in IPv6 code when using rpfilter with a setup running FRR and external nexthop objects. The root cause of the crash is fib6_select_path setting fib6_nh in the result to NULL because of an improper check for nexthop objects. More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif set causing fib6_select_path to be called with have_oif_match set. fib6_select_path has early check on have_oif_match and jumps to the out label which presumes a builtin fib6_nh. This path is invalid for nexthop objects; for external nexthops fib6_select_path needs to just return if the fib6_nh has already been set in the result otherwise it returns after the call to nexthop_path_fib6_result. Update the check on have_oif_match to not bail on external nexthops. Update selftests for this problem. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by:
Brian Rak <brak@choopa.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some fixes about reset issue and a use-after-free of self-test. ==================== Signed-off-by: -
Yonglong Liu authored
Enable promisc mode of PF, set VF link state to enable, and run iperf of the VF, then do self test of the PF. The self test will fail with a low frequency, and may cause a use-after-free problem. [ 87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 87.159722] ================================================================== [ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608 [ 87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186 [ 87.201012] [ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4 [ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020 [ 87.238292] Call trace: [ 87.243173] dump_backtrace+0x0/0x280 [ 87.250491] show_stack+0x24/0x30 [ 87.257114] dump_stack+0xe8/0x140 [ 87.263911] print_address_description.isra.8+0x70/0x380 [ 87.274538] __kasan_report+0x12c/0x230 [ 87.282203] kasan_report+0xc/0x18 [ 87.288999] __asan_load1+0x60/0x68 [ 87.295969] hex_dump_to_buffer+0x140/0x608 [ 87.304332] print_hex_dump+0x140/0x1e0 [ 87.312000] hns3_lb_check_skb_data+0x168/0x170 [ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0 [ 87.329422] hns3_self_test+0x708/0x8c0 The length of packet sent by the selftest process is only 128 + 14 bytes, and the min buffer size of a BD is 256 bytes, and the receive process will make sure the packet sent by the selftest process is in the linear part, so only check the linear part in hns3_lb_check_skb_data(). So fix this use-after-free by using skb_headlen() to dump skb->data instead of skb->len. Fixes: c39c4d98 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
When unloading driver, if flag HNS3_NIC_STATE_INITED has been already cleared, the debugfs will not be uninitialized, so fix it. Fixes: b2292360 ("net: hns3: Add debugfs framework registration") Signed-off-by:
-
Huazhong Tan authored
When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE and handshake status should not set, otherwise the retry will fail. So adds a check for asserting VF reset and returns directly when fails. Fixes: ef5f8e50 ("net: hns3: stop handling command queue while resetting VF") Signed-off-by:
-
Huazhong Tan authored
If there is a PF reset pending before FLR prepare, FLR's preparatory work will not fail, but the FLR rebuild procedure will fail for this pending. So this PF reset pending should be handled in the FLR preparatory. Fixes: 8627bded ("net: hns3: refactor the precedure of PF FLR") Signed-off-by:
-
David S. Miller authored
Andre Edich says: ==================== smsc95xx: fix smsc95xx_bind The patchset fixes two problems in the function smsc95xx_bind: - return of false success - memory leak Changes in v2: - added "Fixes" tags to both patches ==================== Signed-off-by: -
Andre Edich authored
In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee ("smsc95xx: add wol support for more frame types") Signed-off-by:
Andre Edich <andre.edich@microchip.com> Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by:
-
Andre Edich authored
The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
-
Xie He authored
When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header. So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device". This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets. Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
- 05 Jul, 2020 11 commits
-
-
David S. Miller authored
Taehee Yoo says: ==================== net: rmnet: fix interface leak for rmnet module There are two problems in rmnet module that they occur the leak of a lower interface. The symptom is the same, which is the leak of a lower interface. But there are two different real problems. This patchset is to fix these real problems. 1. Do not allow to have different two modes. As a lower interface of rmnet, there are two modes that they are VND and BRIDGE. One interface can have only one mode. But in the current rmnet, there is no code to prevent to have two modes in one lower interface. So, interface leak occurs. 2. Do not allow to add multiple bridge interfaces. rmnet can have only two bridge interface. If an additional bridge interface is tried to be attached, rmnet should deny it. But there is no code to do that. So, interface leak occurs. ==================== Signed-off-by: -
Taehee Yoo authored
rmnet can have only two bridge interface. One of them is a link interface and another one is added by the master operation. rmnet interface shouldn't allow adding additional bridge interfaces by mater operation. But, there is no code to deny additional interfaces. So, interface leak occurs. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link set dummy2 master rmnet0 ip link del rmnet0 In the above test command, the dummy0 was attached to rmnet as VND mode. Then, dummy1 was attached to rmnet0 as BRIDGE mode. At this point, dummy0 mode is switched from VND to BRIDGE automatically. Then, dummy2 is attached to rmnet as BRIDGE mode. At this point, rmnet0 should deny this operation. But, rmnet0 doesn't deny this. So that below splat occurs when the rmnet0 interface is deleted. Splat looks like: [ 186.684787][ C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 186.684788][ C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x [ 186.684805][ C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621 [ 186.684807][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 186.684808][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 186.684811][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5 [ 186.684812][ C2] RSP: 0018:ffff8880cd9472e0 EFLAGS: 00010287 [ 186.684815][ C2] RAX: ffff8880cc56da58 RBX: ffff8880ab21c000 RCX: ffffffff9329d323 [ 186.684816][ C2] RDX: 1ffffffff2be6410 RSI: 0000000000000008 RDI: ffffffff95f32080 [ 186.684818][ C2] RBP: dffffc0000000000 R08: fffffbfff2be6411 R09: fffffbfff2be6411 [ 186.684819][ C2] R10: ffffffff95f32087 R11: 0000000000000001 R12: ffff8880cd947480 [ 186.684820][ C2] R13: ffff8880ab21c0b8 R14: ffff8880cd947400 R15: ffff8880cdf10640 [ 186.684822][ C2] FS: 00007f00843890c0(0000) GS:ffff8880d4e00000(0000) knlGS:0000000000000000 [ 186.684823][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.684825][ C2] CR2: 000055b8ab1077b8 CR3: 00000000ab612006 CR4: 00000000000606e0 [ 186.684826][ C2] Call Trace: [ 186.684827][ C2] ? lockdep_hardirqs_on_prepare+0x379/0x540 [ 186.684829][ C2] ? netif_set_real_num_tx_queues+0x780/0x780 [ 186.684830][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 186.684831][ C2] ? __kasan_slab_free+0x126/0x150 [ 186.684832][ C2] ? kfree+0xdc/0x320 [ 186.684834][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 186.684835][ C2] unregister_netdevice_many.part.135+0x13/0x1b0 [ 186.684836][ C2] rtnl_delete_link+0xbc/0x100 [ ... ] [ 238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1 Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
There are two types of the lower interface of rmnet that are VND and BRIDGE. Each lower interface can have only one type either VND or BRIDGE. But, there is a case, which uses both lower interface types. Due to this unexpected behavior, lower interface leak occurs. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link add rmnet1 link dummy1 type rmnet mux_id 2 ip link del rmnet0 The dummy1 was attached as BRIDGE interface of rmnet0. Then, it also was attached as VND interface of rmnet1. This is unexpected behavior and there is no code for handling this case. So that below splat occurs when the rmnet0 interface is deleted. Splat looks like: [ 53.254112][ C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 53.254117][ C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx [ 53.254182][ C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620 [ 53.254188][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.254192][ C1] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 53.254200][ C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5 [ 53.254205][ C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287 [ 53.254214][ C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323 [ 53.254219][ C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080 [ 53.254223][ C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411 [ 53.254228][ C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480 [ 53.254233][ C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40 [ 53.254238][ C1] FS: 00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000 [ 53.254243][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.254248][ C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0 [ 53.254253][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.254257][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.254261][ C1] Call Trace: [ 53.254266][ C1] ? lockdep_hardirqs_on_prepare+0x379/0x540 [ 53.254270][ C1] ? netif_set_real_num_tx_queues+0x780/0x780 [ 53.254275][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254279][ C1] ? __kasan_slab_free+0x126/0x150 [ 53.254283][ C1] ? kfree+0xdc/0x320 [ 53.254288][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254293][ C1] unregister_netdevice_many.part.135+0x13/0x1b0 [ 53.254297][ C1] rtnl_delete_link+0xbc/0x100 [ 53.254301][ C1] ? rtnl_af_register+0xc0/0xc0 [ 53.254305][ C1] rtnl_dellink+0x2dc/0x840 [ 53.254309][ C1] ? find_held_lock+0x39/0x1d0 [ 53.254314][ C1] ? valid_fdb_dump_strict+0x620/0x620 [ 53.254318][ C1] ? rtnetlink_rcv_msg+0x457/0x890 [ 53.254322][ C1] ? lock_contended+0xd20/0xd20 [ 53.254326][ C1] rtnetlink_rcv_msg+0x4a8/0x890 [ ... ] [ 73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1 Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure") Signed-off-by: -
Taehee Yoo authored
To release hsr(upper) interface, it should release its own lower interfaces first. Then, hsr(upper) interface can be released safely. In the current code of error path of hsr_dev_finalize(), it releases hsr interface before releasing a lower interface. So, a warning occurs, which warns about the leak of lower interfaces. In order to fix this problem, changing the ordering of the error path of hsr_dev_finalize() is needed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link add hsr1 type hsr slave1 dummy2 slave2 dummy0 Splat looks like: [ 214.923127][ C2] WARNING: CPU: 2 PID: 1093 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 214.923129][ C2] Modules linked in: hsr dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipx [ 214.923154][ C2] CPU: 2 PID: 1093 Comm: ip Not tainted 5.8.0-rc2+ #623 [ 214.923156][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 214.923157][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 214.923160][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5 [ 214.923162][ C2] RSP: 0018:ffff8880c5156f28 EFLAGS: 00010287 [ 214.923165][ C2] RAX: ffff8880d1dad458 RBX: ffff8880bd1b9000 RCX: ffffffffb929d243 [ 214.923167][ C2] RDX: 1ffffffff77e63f0 RSI: 0000000000000008 RDI: ffffffffbbf31f80 [ 214.923168][ C2] RBP: dffffc0000000000 R08: fffffbfff77e63f1 R09: fffffbfff77e63f1 [ 214.923170][ C2] R10: ffffffffbbf31f87 R11: 0000000000000001 R12: ffff8880c51570a0 [ 214.923172][ C2] R13: ffff8880bd1b90b8 R14: ffff8880c5157048 R15: ffff8880d1dacc40 [ 214.923174][ C2] FS: 00007fdd257a20c0(0000) GS:ffff8880da200000(0000) knlGS:0000000000000000 [ 214.923175][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.923177][ C2] CR2: 00007ffd78beb038 CR3: 00000000be544005 CR4: 00000000000606e0 [ 214.923179][ C2] Call Trace: [ 214.923180][ C2] ? netif_set_real_num_tx_queues+0x780/0x780 [ 214.923182][ C2] ? dev_validate_mtu+0x140/0x140 [ 214.923183][ C2] ? synchronize_rcu.part.79+0x85/0xd0 [ 214.923185][ C2] ? synchronize_rcu_expedited+0xbb0/0xbb0 [ 214.923187][ C2] rollback_registered+0xc8/0x170 [ 214.923188][ C2] ? rollback_registered_many+0xcf0/0xcf0 [ 214.923190][ C2] unregister_netdevice_queue+0x18b/0x240 [ 214.923191][ C2] hsr_dev_finalize+0x56e/0x6e0 [hsr] [ 214.923192][ C2] hsr_newlink+0x36b/0x450 [hsr] [ 214.923194][ C2] ? hsr_dellink+0x70/0x70 [hsr] [ 214.923195][ C2] ? rtnl_create_link+0x2e4/0xb00 [ 214.923197][ C2] ? __netlink_ns_capable+0xc3/0xf0 [ 214.923198][ C2] __rtnl_newlink+0xbdb/0x1270 [ ... ] Fixes: e0a4b997 ("hsr: use upper/lower device infrastructure") Reported-by: syzbot+7f1c020f68dab95aab59@syzkaller.appspotmail.com Signed-off-by: -
Luo bin authored
When sending mailbox in the work of aeq event, another aeq event will be triggered. because the last aeq work is not exited and only one work can be excuted simultaneously in the same workqueue, mailbox sending function will return failure of timeout. We create and use another workqueue to fix this. Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Use kvfree() to release vmalloc()'ed areas in ipset, from Eric Dumazet. 2) UAF in nfnetlink_queue from the nf_conntrack_update() path. ==================== Signed-off-by: -
David S. Miller authored
Randy Dunlap says: ==================== Documentation: networking: eliminate doubled words Drop all duplicated words in Documentation/networking/ files. ==================== Signed-off-by: -
Randy Dunlap authored
Drop the doubled word "have". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "that". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "that". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "in". Signed-off-by:
-
