serial2002_setup_subdevices() initializes each subdevice based on the
config read from the attached serial device. Part of this initialization
is to setup the subdevice range_table_list for the non digital subdevices.
The range_table_list is allocated only when a 'range' is passed to the
functions. Each channel of the subdevice then has it's 'range' initialized
and that range is added to the range_table_list.

The logic of this function works but causes Coverity complain about an
Explicit null dereference of the allocated 'range_table_list'. Add a check
for the 'range_table_list' to quiet the Coverity issue.

Reported-by: coverity (CID 1011632)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ni_write_caldac() checks the boardinfo 'caldac' array to determine what
caldac is used for a given 'addr'. It then calculates the 'bitstring' and
number of 'bits' used to write a value to that caldac address.

After checking the caldac array, if the number of bits is 0 there is no
caldac associated with the address. If this happens we shouldn't try
writing to the non-existing caldac.

Reported-by: coverity (CID 1192116)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'b_chans' may be a valud up to 32. 'b_mask' is an unsigned int and a left shift of
more than 31 bits has undefined behavior. Fix the calc so it works correctly with
a 'b_chans' of 32..

Reported-by: coverity (CID 1192244)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issue.
Signed-off-by: Andrei Maresu <andreimaresu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

both the misc_deregister(), parport_release() and
parport_unregister_device() is there in the module_exit function also.
detach is called from parport_unregister_driver() and by the time
detach executes misc_deregister(), parport_release() and
parport_unregister_device() has already executed marking
keypad_initialized and lcd.initialized  as false. so this part of the
code will never execute.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update boilerplate comments to be more terse by removing
redundant information.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has drifted away from out-of-tree versions years ago
and the version string does not provide any useful information.
Instead provide the kernel version string to ethtool, so that we get
useful version information e.g. for bug reports.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This feature is not used so eliminate it.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have RED always enabled, so eliminate the #define.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We always try to use skbuffs for packet buffers, so eliminate
a redundant define.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HW checksum is always enabled, so delete a redundant define.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have the workaround always enabled, so eliminate a redundant #define.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete references to CONFIG_CAVIUM_RESERVE32. Kernel does not have such
option and the driver does not use it for anything.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code for spx1 and spx0 block are identical, move it into a function.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move interrupt printouts into a common function to avoid copy paste.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move interrupt printouts into a common function to avoid copy paste.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a function to enable/disable HW preamble checking to avoid copy paste.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code for gmx0 and gmx1 block is identical, move it into a function.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make link poll generic to avoid copy paste.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Always use cvm_oct_note_carrier() to avoid copy-pasted code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add queue information to carrier note.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete redundant wrappers.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All init functions call ndo_stop if it's defined, so move it
to common function.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All ndo_stop functions are identical. Get rid of duplicated code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ndo_open for rgmii, sgmii and xaui are almost identical. Put the common
code in a single function.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vif should never be or go null while in loop.

Fixes race condition where interrupts are late and when
interface is not present.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Shock horror, example template code that has never been used in reality is
in fact a hazard. This fixes the obvious bug, probably these kind of
"examples" should be deleted so real (working) examples are followed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes few lines of commented code.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes a stray semicolon around closing brace of an if code
block.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Put NULL test on the result of the previous call instead on one of its
arguments.  A simplified version of the semantic match that finds this
problem is as follows (http://coccinelle.lip6.fr/):

// <smpl>
r@
expression *e1;
expression *e2;
identifier f;
statement S1,S2;
@@

e1 = f(...,e2,...);
(
if (e1 == NULL || ...) S1 else S2
|
*if (e2 == NULL || ...) S1 else S2
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/internal.h header guard tests for
__LINUX_FBTFT__INTERNAL_H but then defines __LINUX_FBTFT_INTERNAL_H
(only 1 underscore) and uses the same name for the #endif comment.
Use the same name everywhere.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

    drivers/built-in.o: In function `fbtft_framebuffer_alloc':
    (.text+0xb53cae): undefined reference to `dmam_alloc_coherent'

As DMA support is already optional, make it depend on HAS_DMA.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/checkpatch.pl WARNING: Missing a blank line after declarations
Signed-off-by: Charlie Wong Super <1213charlie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Spaces at the start of the line, replace the leading space to tabs
Signed-off-by: Charlie Wong Super <1213charlie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This module is being removed completely, because it contained wrapper functions
and utility functions that were used in virtpci and virthba. Since these two
drivers are being rewritten to not use these wrappers and utilities, uislib
needs to go.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The virtpci driver is being rewritten, so remove the driver from the staging
tree.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The virthba driver is being rewritten and will be renamed to visorhba, so delete
the old driver from the source tree.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

visorchipset_bus_info.dev_no is only assigned the value of
controlvm_message_packet.create_bus.dev_count, which is a u32. No
point promoting it to a u64.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>