TODO file lists task to remove unnecessary error messages. There are
no unnecessary error messages in the driver, this must have been done
already.

Remove task from TODO file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver contains dead code, guarded with #ifdef's. We can safely remove
this, it will be in the git history if it is later needed.

Remove dead code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver uses magic number members within structs, this is an antiquated
method of catching data errors. We don't do things that way any more.

Remove magic number struct members. Remove all checks to magic
numbers.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file lists task to remove unnecessary comments.

Make initial attempt at removing unnecessary comments. Choose not to
be to vicious in removal. We can remove more once the driver is
cleaned up/tested some more.

For functions with internal linkage, reduce the function comment where
possible. For functions with external linkage, migrate the function
comment to kernel doc format.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pre-processor header guards use double underscore, typically kernel
code uses single underscore when defining header guards. 'endif'
statement should include what is ending as a comment string.

Remove double underscore, add comment string to 'endif'
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file has task: remove unnecessary comments. Driver uses some
custom comment format. Driver would be better if it used kernel doc
format.

Audit header file comments. Replace struct comments with kernel doc
format comments. Remove unnecessary comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function unisys_vmcall was returning VMCALL specific errors and the
calling code was ignoring which error was actually returned. Instead we
should be mapping the VMCALL error into a proper Linux error and then
returning that, since we now have an error we know what to do with, we
don't have to drop it but we can send it up the stack.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only one using unisys_vmcall was visorchipset.c, it can be moved into
the visorchipset file directly instead of being in a header file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comment at the beginning of the vmcallinterface.h file references IO
Virtualization. It should be more specific that it is referencing s-Par
Virtualization.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro ISSUE_IO_VMCALL was a wrapper around the function unisys_vmcall.
It doesn't need to exist and was just being noisy, so get rid of it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We shouldn't be checking if VMCALL_CONTROLVM_ADDR is defined, remove it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We had several if statements inside of if statements that should be
consolidated into an if statement with an && to clean up the code some
more.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove braces around single line if statements, they are not needed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If there is an error in chipset_device_pause/resume don't try to respond,
error out and let the calling functions respond to this error just like
any other error they encounter.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the function to remove some if statments that should be done
in the calling function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we fail to register the visordriver, don't call unregister, just
return with the error.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't override the visorchannel_read_error, just return the
error that it generates.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function dev_set_name can return an error, don't just ignore it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The add_uevent_var returns an error. Don't overwrite the error with
-ENOMEM, just pass the error code back up.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The forcenomatch parameter was not being used, so get rid of it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The forcematch parameter was not being used, so get rid of it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create bus_type was just calling register_bustype. Since we control how
many times we call create_bus_type it was extraneous keeping a counter if
the bus was already registered, so the functions were no longer needed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function get_vbus_header_info returns errors that were being handled
incorrectly. Fix the error handling in create_bus_instance.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add error handling to visorbus_enable_channel_interrupt.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Report errors if we have a problem in dev_start_periodic_work.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We only have one version of spar_check_channel, get rid of the client
at the end and help save space.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro SPAR_VBUS_CHANNEL_CLIENT_OK was noisy and only used in one place
so get rid of it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move vbuschannel_print_devinfo from vbuchannel.h to visorbus_main.c since
it is only referenced in visorbus_main.c. Since it is in a .c file, get
rid of the inline for it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With all the code churn, bus_responder and device_responder have become
identical, consolidate them to the same function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds error handling to the chipset_device_create message. If it returns
a failure, it is assumed it has not signaled the s-Par firmware of the
failure and the caller must do that.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since signalinsert/remove now return valid error codes, we need to check
them when we call them in visornic. The error codes need to propagate out
to the calling functions.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added the __packed keyword to all structures in controlvmchannel.h
to ensure alignment and size in memory.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function chipset_bus_create should return an error. If an error
is returned, it is assumed the response has not been sent by bus_create.

Correctly handle when the error has been returned in visorchipset.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ret variable was only returning an error, so changing it to err to
be more consistent across the file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ret variable was only returning an error, so changing it to err to
be more consistent across the file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ret variable was only returning an error, so changing it to err to
be more consistent across the file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ret variable was only returning an error, so changing it to err to
be more consistent across the file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ret variable was only returning an error, so changing it to err to
be more consistent across the file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed a comment that was describing the relationship between the
visorchipset driver and the visorbus driver. Since they are now one
driver the comment no longer makes sense.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function bus_device_info_init was defined in visorbus_private.h. The
only file that uses it is visorbus_main.c so move the function into the .c
file instead.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>