Remove excess semicolon after closing parenthesis.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190914031133.GA28447@SDSigned-off-by: Mark Brown <broonie@kernel.org>

This is to allow machine drivers to set a certain bitclk rate
which might not be exactly rate * frame size.

Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

While it is safe to use strncpy in this case, the advice is to move to
strscpy or strscpy_pad.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190911083331.16801-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

All these functions declares and initializes variable ret with
'0' and without modifying 'ret' variable, it is returned.

This patch removes this redundancy and returns '0' directly.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190909174541.GA22718@SDSigned-off-by: Mark Brown <broonie@kernel.org>

Add an op in hdmi_codec_ops so codec driver can register callback
function to handle plug event.

Driver in DRM can use this callback function to report connector status.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.orgReviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.

This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_unbind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_comp_order(order) {
		for_each_card_auxs_safe(card, comp, _comp) {

(1)			if (comp->driver->remove_order == order) {
				...
=>				soc_unbind_aux_dev(comp);
			}
	}

soc_unbind_aux_dev() itself is not related to remove_order (1).
And, it is called from soc_remove_aux_devices(), even though
its paired function soc_bind_aux_dev() is called from
snd_soc_instantiate_card().
It is very unbalance, and very difficult to understand.

This patch do
1) update soc_bind_aux_dev() to self contained
2) call it from soc_cleanup_card_resources() to make up balance
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r24wor0z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

soc-core.c has soc_bind_aux_dev(), but, there is no its paired
soc_unbind_aux_dev().
This patch adds soc_unbind_aux_dev().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpcor14.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_bind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_card_pre_auxs(xxx) {
=>		ret = soc_bind_aux_dev(xxx);
		...
	}

This patch does all for_each_xxx() under soc_bind_aux_dev(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9sor1b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_link_dais() next to soc_remove_link_dais()
which is paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9u8or1g.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_probe_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_probe_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_probe_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87woeoor1m.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_probe_link_dais() (1) is called under probe_order (2),
and it will initialize dai_link related settings at *Last* turn (3)(B).
It is very complex code.

	static int soc_probe_link_dais(..., order)
	{
(A)		/* probe DAIs here */
		...

(3)		if (order != SND_SOC_COMP_ORDER_LAST)
			return 0;

(B)		/* initialize dai_link related settings */
		...
	}

	static int snd_soc_instantiate_card(...)
	{
		...
(2)		for_each_comp_order(order) {
			for_each_card_rtds(...) {
(1)				ret = soc_probe_link_dais(..., order);
			}
		}
	}

This patch separes soc_probe_link_dais() into "DAI probe" portion (A),
and dai_link settings portion (B).
The later is named as soc_link_init() by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2z4or1r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_dai() next to soc_remove_dai() which is
paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhjkor1x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_remove_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_remove_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_remove_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rwwq5mm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_remove_link_components() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_remove_link_components(xxx);
	}

This patch does all for_each_xxx() under soc_remove_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736hcq5ms.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current soc_probe_link_components() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx) {
=>			ret = soc_probe_link_components(xxx);
			...
		}
	}

This patch does all for_each_xxx() under soc_probe_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1sq5mx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 82 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  26548	   7288	     64	  33900	   846c	sound/soc/codecs/rt1308.o

After:
   text	   data	    bss	    dec	    hex	filename
  26370	   7384	     64	  33818	   841a	sound/soc/codecs/rt1308.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 93 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  38961	   9784	     64	  48809	   bea9	sound/soc/codecs/rt1305.o

After:
   text	   data	    bss	    dec	    hex	filename
  38804	   9848	     64	  48716	   be4c	sound/soc/codecs/rt1305.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074156.21907-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 100 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  51463	  13016	    128	  64607	   fc5f	sound/soc/codecs/rt1011.o

After:
   text	   data	    bss	    dec	    hex	filename
  51299	  13080	    128	  64507	   fbfb	sound/soc/codecs/rt1011.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch set 0Hz to sysclk when shutdown the card.

Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.

But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).

Bad scenario as follows (mclk-fs = 256):
   - Initialize sysclk by correct value (Ex. 12.288MHz)
     - Codec set constraints of PCM rate by sysclk
       48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
   - Play 48kHz sound, it's acceptable
   - Sysclk is not changed

   - Play 32kHz sound, it's acceptable
   - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
     - Codec set constraints of PCM rate by sysclk
       32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)

   - Play 48kHz again, but it's NOT acceptable because constraints
     do not allow 48kHz

So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.netSigned-off-by: Mark Brown <broonie@kernel.org>

This patch ignores sysclk setting if it is 0Hz.

Some codecs treat 0Hz sysclk as signal of applying no constraints.
This driver does not have such feature but current implementation
outputs 'Failed to set mclk' error message if machine driver sets
0Hz sysclk to this driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174332.19586-1-katsuhiro@katsuster.netSigned-off-by: Mark Brown <broonie@kernel.org>

Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  16253	   7200	      0	  23453	   5b9d	sound/soc/codecs/ad193x.o

After:
   text	   data	    bss	    dec	    hex	filename
  16056	   7360	      0	  23416	   5b78	sound/soc/codecs/ad193x.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.

Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.

Bad scenario as follows (mclk-fs = 256):
  - Initialize sysclk by correct value (Ex. 12.288MHz)
    - ES8316 set constraints of PCM rate by sysclk
      48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
      24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
  - Play 48kHz sound, it's acceptable
  - Sysclk is not changed

  - Play 32kHz sound, it's acceptable
  - Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
    - ES8316 set constraints of PCM rate by sysclk
      32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
      16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)

  - Play 48kHz again, but it's NOT acceptable because constraints
    list does not allow 48kHz
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.netSigned-off-by: Mark Brown <broonie@kernel.org>

This patch removes redundant null checks for optional MCLK clock.
And fix DT binding document for changing clock property to optional
from required.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-1-katsuhiro@katsuster.netSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit 1137ceee ("ARM: OMAP1: ams-delta: Don't request unused
GPIOs"), on-board audio has appeared muted.  It has been discovered that
believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be
set low for audible sound in handsfree and handset mode respectively.

According to Amstrad E3 wiki, the purpose of both pins hasn't been
clearly identified.  Original Amstrad software used to produce a high
pulse on them when the phone was taken off hook or recall was pressed.
With the current findings, we can assume the pins provide a kind of
audio mute function, separately for handset and handsfree operation
modes.

Commit 2afdb4c4 ("ARM: OMAP1: ams-delta: Fix audio permanently
muted") attempted to fix the issue temporarily by hogging the GPIO pin
"hookflash1" renamed to "audio_mute", however the fix occurred
incomplete as it restored audible sound only for handsfree mode.

Stop hogging that pin, rename the pins to "handsfree_mute" and
"handset_mute" respectively and implement appropriate DAPM event
callbacks for "Speaker" and "Earpiece" DAPM widgets.

Fixes: 1137ceee ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for
other purposes.

Currently it is left empty with the dmaengine-pcm, in this case copy the
pcm->id string as pcm->name.

For example IGT is using this to find the HDMI PCM for testing audio on it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Arthur She <arthur.she@linaro.org>
Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull section attribute fix from Miguel Ojeda:
 "Fix Oops in Clang-compiled kernels (Nick Desaulniers)"

* tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux:
  include/linux/compiler.h: fix Oops for Clang-compiled kernels

Pull GPIO fixes from Linus Walleij:
 "All related to the PCA953x driver when handling chips with more than 8
  ports, now that works again"

* tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: use pca953x_read_regs instead of regmap_bulk_read
  gpio: pca953x: correct type of reg_direction

GCC unescapes escaped string section names while Clang does not. Because
__section uses the `#` stringification operator for the section name, it
doesn't need to be escaped.

This fixes an Oops observed in distro's that use systemd and not
net.core.bpf_jit_enable=1, when their kernels are compiled with Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/619
Link: https://bugs.llvm.org/show_bug.cgi?id=42950
Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2
Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/Acked-by: Will Deacon <will@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[Cherry-picked from the __section cleanup series for 5.3]
[Adjusted commit message]
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

This reverts commit 558682b5.

Chris Wilson reports that it breaks his CPU hotplug test scripts.  In
particular, it breaks offlining and then re-onlining the boot CPU, which
we treat specially (and the BIOS does too).

The symptoms are that we can offline the CPU, but it then does not come
back online again:

    smpboot: CPU 0 is now offline
    smpboot: Booting Node 0 Processor 0 APIC 0x0
    smpboot: do_boot_cpu failed(-1) to wakeup CPU#0

Thomas says he knows why it's broken (my personal suspicion: our magic
handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix
is to just revert it, since we've never touched the LDR bits before, and
it's not worth the risk to do anything else at this stage.

[ Hotpluging of the boot CPU is special anyway, and should be off by
  default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the
  cpu0_hotplug kernel parameter.

  In general you should not do it, and it has various known limitations
  (hibernate and suspend require the boot CPU, for example).

  But it should work, even if the boot CPU is special and needs careful
  treatment       - Linus ]

Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bandan Das <bsd@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Documentation updates from Greg KH:
 "A few small patches for the documenation file that came in through the
  char-misc tree in -rc7 for your tree.

  They fix the mistake in the .rst format that kept the table of
  companies from showing up in the html output, and most importantly,
  add people's names to the list showing support for our process"

* tag 'char-misc-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Add Qualcomm process ambassador for hardware security issues
  Documentation/process/embargoed-hardware-issues: Microsoft ambassador
  Documentation/process: Add Google contact for embargoed hardware issues
  Documentation/process: Volunteer as the ambassador for Xen

Add Trilok Soni as process ambassador for hardware security issues
from Qualcomm.
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Link: https://lore.kernel.org/r/1567796517-8964-1-git-send-email-tsoni@codeaurora.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull dmaengine fixes from Vinod Koul:
 "Some late fixes for drivers:

   - memory leak in ti crossbar dma driver

   - cleanup of omap dma probe

   - Fix for link list configuration in sprd dma driver

   - Handling fixed for DMACHCLR if iommu is mapped in rcar dma"

* tag 'dmaengine-fix-5.3' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped
  dmaengine: sprd: Fix the DMA link-list configuration
  dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()
  dmaengine: ti: dma-crossbar: Fix a memory leak bug

Pull SCSI fix from James Bottomley:
 "Just a single lpfc fix adjusting the number of available queues for
  high CPU count systems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Raise config max for lpfc_fcp_mq_threshold variable

Pull libnvdimm fix from Dan Williams:
 "Restore support for 1GB alignment namespaces, truncate the end of
  misaligned namespaces"

* tag 'libnvdimm-fix-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/pfn: Fix namespace creation on misaligned addresses

Pull input fix from Dmitry Torokhov:
 "A tiny update from Benjamin removing a mistakenly added Elan PNP ID so
  that the device is again handled by hid-multitouch"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - remove Lenovo Legion Y7000 PnpID