Skip to content

L
linux
Switch branch/tag
  1. 15 Nov, 2022 6 commits
    • Jian Shen's avatar
      net: hns3: fix incorrect hw rss hash type of rx packet · a56cad69
      Jian Shen authored 
      Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.

Fixes: 79664077 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarHao Lan <lanhao@huawei.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      a56cad69
    • Aminuddin Jamaluddin's avatar
      net: phy: marvell: add sleep time after enabling the loopback bit · 18c532e4
      Aminuddin Jamaluddin authored 
      Sleep time is added to ensure the phy to be ready after loopback
bit was set. This to prevent the phy loopback test from failing.

Fixes: 020a45af ("net: phy: marvell: add Marvell specific PHY loopback")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: default avatarMuhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: default avatarAminuddin Jamaluddin <aminuddin.jamaluddin@intel.com>
Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      18c532e4
    • Yuan Can's avatar
      net: ena: Fix error handling in ena_init() · d349e9be
      Yuan Can authored 
      The ena_init() won't destroy workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed.
Call destroy_workqueue() when pci_register_driver() failed to prevent the
resource leak.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: default avatarYuan Can <yuancan@huawei.com>
Acked-by: default avatarShay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      d349e9be
    • Cong Wang's avatar
      kcm: close race conditions on sk_receive_queue · 5121197e
      Cong Wang authored 
      sk->sk_receive_queue is protected by skb queue lock, but for KCM
sockets its RX path takes mux->rx_lock to protect more than just
skb queue. However, kcm_recvmsg() still only grabs the skb queue
lock, so race conditions still exist.

We can teach kcm_recvmsg() to grab mux->rx_lock too but this would
introduce a potential performance regression as struct kcm_mux can
be shared by multiple KCM sockets.

So we have to enforce skb queue lock in requeue_rx_msgs() and handle
skb peek case carefully in kcm_wait_data(). Fortunately,
skb_recv_datagram() already handles it nicely and is widely used by
other sockets, we can just switch to skb_recv_datagram() after
getting rid of the unnecessary sock lock in kcm_recvmsg() and
kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets,
so it is safe to get rid of this check too.

I ran the original syzbot reproducer for 30 min without seeing any
issue.

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com
Reported-by: default avatarshaozhengchao <shaozhengchao@huawei.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: default avatarCong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      5121197e
    • Yuan Can's avatar
      net: ionic: Fix error handling in ionic_init_module() · 280c0f7c
      Yuan Can authored 
      A problem about ionic create debugfs failed is triggered with the
following log given:

 [  415.799514] debugfs: Directory 'ionic' with parent '/' already present!

The reason is that ionic_init_module() returns ionic_bus_register_driver()
directly without checking its return value, if ionic_bus_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ionic can never be created later.

 ionic_init_module()
   ionic_debugfs_create() # create debugfs directory
   ionic_bus_register_driver()
     pci_register_driver()
       driver_register()
         bus_add_driver()
           priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when ionic_bus_register_driver() returns error.

Fixes: fbfb8031 ("ionic: Add hardware init and device commands")
Signed-off-by: default avatarYuan Can <yuancan@huawei.com>
Acked-by: default avatarShannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      280c0f7c
    • Amit Cohen's avatar
      mlxsw: Avoid warnings when not offloaded FDB entry with IPv6 is removed · 30f5312d
      Amit Cohen authored 
      FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold
a reference on a resource - the KVDL entry where the IPv6 underlay
destination IP is stored. For that, the driver maintains two hash tables:
1. Maps IPv6 to KVDL index
2. Maps {MAC, FID index} to IPv6 address

When a FDB entry is removed, the second table is used to find the relevant
IPv6 address and the first table is used to remove the reference count and
free the index if is not used anymore.

In order for a packet to be forwarded to a single remote VTEP, FDB
entries need to be configured at both the bridge and VXLAN devices' FDB
tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry
in the hardware. Therefore, in case one entry is removed, the entry will
be removed from the hardware and the remaining entry will be unmarked
with 'offload' flag since it is not offloaded anymore.

For example, the two FDB entries should be added to allow packets to be
forwarded via vx10:
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10

When one entry will be removed, the second one will not be offloaded
anymore. When the first entry (in VXLAN FDB) will be removed / will not be
offloaded anymore, the two mappings in IPv6 hash tables will be removed.

In case that the second entry is removed before the first one, unexpected
warnings[1][2] will be shown in user space as a result of removing the
first entry. The issue is that not offloaded entry is removed, the driver
tries to search the relevant entries in the hash tables, does not find them
and therefore warns.

Do not handle removing of not offloaded VXLAN FDB entries, as they were
already removed when the offload flag was removed.

[1]:
WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Call Trace:
  <TASK>
  mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum]
  mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
  ? finish_task_switch.isra.0+0x8c/0x290
  process_one_work+0x1cd/0x390
  worker_thread+0x48/0x3c0
  ? process_one_work+0x390/0x390
  kthread+0xe0/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

[2]:
WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Call Trace:
  <TASK>
  ? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum]
  mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum]
  mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
  ? finish_task_switch.isra.0+0x8c/0x290
  process_one_work+0x1cd/0x390
  worker_thread+0x48/0x3c0
  ? process_one_work+0x390/0x390
  kthread+0xe0/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Fixes: 0860c764 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries")
Signed-off-by: default avatarAmit Cohen <amcohen@nvidia.com>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      30f5312d
  3. 14 Nov, 2022 12 commits
  5. 12 Nov, 2022 8 commits
  7. 11 Nov, 2022 10 commits
  9. 10 Nov, 2022 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7