sparse reports
drivers/power/reset/pwr-mlxbf.c:19:12: warning: symbol 'rst_pwr_hid' was not declared. Should it be static?
drivers/power/reset/pwr-mlxbf.c:20:12: warning: symbol 'low_pwr_hid' was not declared. Should it be static?

Both rst_pwr_hid and low_pwr_hid are only used in a single function
so they should be local variables.

Fixes: a4c0094f ("power: reset: pwr-mlxbf: add BlueField SoC power control driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add missing include for devm_work_autocancel to fix build error:

drivers/power/reset/pwr-mlxbf.c: In function 'pwr_mlxbf_probe':
drivers/power/reset/pwr-mlxbf.c:67:15: error: implicit declaration of function 'devm_work_autocancel' [-Werror=implicit-function-declaration]
   67 |         err = devm_work_autocancel(dev, &priv->send_work, pwr_mlxbf_send_work);
      |               ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Fixes: a4c0094f ("power: reset: pwr-mlxbf: add BlueField SoC power control driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This adds reset controller support for SAMA7G5 SoCs. Compared with
previous version the reset controller embedded on SAMA7G5 is able to
reset individual on SoC devices (e.g. USB PHY controllers).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add support for SAMA7G5 including reset_controller_dev support for 3 lines
(which are USB PHYs).
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

SAMA7G5 reset controller has 5 extra lines that goes to different devices
(3 lines to USB PHYs, 1 line to DDR controller, 1 line to DDR PHY
controller). These reset lines could be requested by different controller
drivers (e.g. USB PHY driver) and these controllers' drivers could
assert/deassert these lines when necessary. Thus add support for
reset_controller_dev which brings this functionality.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add struct at91_reset_data to keep per platform related information.
This is a prerequisite for adding reset_controller_dev support.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Document structures and enums.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add reset bindings for SAMA7G5. At the moment only USB PHYs are
included.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add documentation for SAMA7G5 reset controller. Compared with previous
versions of reset controllers this one contains support for resetting
in SoC devices (e.g. USB PHYs).
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Convert Atmel/Microchip reset controller to YAML.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This driver supports handling 2 BlueField power states controlled by
GPIO interrupts:

1) chip reset and
2) low power mode
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The maintenance charging is supposedly designed such that the
maintenance current compensates for the battery discharge curve,
and as the charging progress from CC/CV -> maintenance A ->
maintenance B states, we end up on a reasonable voltage to
restart ordinary CC/CV charging after the safety timer at the
maintenance B state exits.

However: old batteries discharge quicker, and in an old
battery we might not get to the expiration of the maintenance B
timer before the battery is completely depleted and the system
powers off with an empty battery.

This is hardly the desire of anyone leaving their phone in the
charger for a few days!

Introduce a second clause in both maintenance states such that
we exit the state and return to ordinary CC/CV charging if
the voltage drops below charge_restart_voltage_uv or 95%
if this is not defined for the battery.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The battery info contains a voltage indicating when the voltage
is so low that it is time to restart the CC/CV charging.
Make the AB8500 respect and prioritize this setting over the
hardcoded 95% threshold.

Break out the check into its own function and add some safeguards
so we do not run into unpredictable side effects.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Similar to the handling of cros_usbpd_charger_ec_command in commit 441d38c6
("power: supply: cros_usbpd: Use struct_size() helper in kzalloc()"),
we thought a patch might be needed here as well.

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Delete the redundant word 'is'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The print function dev_err() is redundant because
platform_get_irq() already prints an error.

Eliminate the follow coccicheck warning:
./drivers/power/supply/goldfish_battery.c:225:2-9: line 225 is
redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Reference regulator schema by absolute path, as expected by DT schema
coding style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Document already used (in DTS and by driver) 'usb-charge-current-limit'
property:

  arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dtb:
    charger@1000: 'usb-charge-current-limit' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The 'usb-otg-vbus' child node is a regulator so reference the regulator
schema for proper evaluation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The 'usb-otg-vbus' child node is a regulator so reference the regulator
schema for proper evaluation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

My Bootlin address is preferred from now on.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull file descriptor fix from Al Viro:
 "Fix for breakage in #work.fd this window"

* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the breakage in close_fd_get_file() calling conventions change

Pull mm hotfixes from Andrew Morton:
 "Fixups for various recently-added and longer-term issues and a few
  minor tweaks:

   - fixes for material merged during this merge window

   - cc:stable fixes for more longstanding issues

   - minor mailmap and MAINTAINERS updates"

* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
  x86/kexec: fix memory leak of elf header buffer
  mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
  mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
  mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
  MAINTAINERS: add maintainer information for z3fold
  mailmap: update Josh Poimboeuf's email

Pull delay-accounting update from Andrew Morton:
 "A single featurette for delay accounting.

  Delayed a bit because, unusually, it had dependencies on both the
  mm-stable and mm-nonmm-stable queues"

* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  delayacct: track delays from write-protect copy

The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.

It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32.  It shoudln't have been a bitmap in the first
place.  The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.

The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.

So just use a regular integer.

In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).

That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953f ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.

Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table.  New variant doesn't, and callers need to be adjusted.

Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194e ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull x86 SGX fix from Thomas Gleixner:
 "A single fix for x86/SGX to prevent that memory which is allocated for
  an SGX enclave is accounted to the wrong memory control group"

* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Set active memcg prior to shmem allocation

Pull x86 mm cleanup from Thomas Gleixner:
 "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"

* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)

Pull x86 microcode updates from Thomas Gleixner:

 - Disable late microcode loading by default. Unless the HW people get
   their act together and provide a required minimum version in the
   microcode header for making a halfways informed decision its just
   lottery and broken.

 - Warn and taint the kernel when microcode is loaded late

 - Remove the old unused microcode loader interface

 - Remove a redundant perf callback from the microcode loader

* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove unnecessary perf callback
  x86/microcode: Taint and warn on late loading
  x86/microcode: Default-disable late loading
  x86/microcode: Rip out the OLD_INTERFACE

Pull x86 cleanups from Thomas Gleixner:
 "A set of small x86 cleanups:

   - Remove unused headers in the IDT code

   - Kconfig indendation and comment fixes

   - Fix all 'the the' typos in one go instead of waiting for bots to
     fix one at a time"

* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix all occurences of the "the the" typo
  x86/idt: Remove unused headers
  x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig

Pull x86 boot update from Thomas Gleixner:
 "Use strlcpy() instead of strscpy() in arch_setup()"

* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Use strscpy() to replace deprecated strlcpy()

Pull clockevent/clocksource updates from Thomas Gleixner:

 - Device tree bindings for MT8186

 - Tell the kernel that the RISC-V SBI timer stops in deeper power
   states

 - Make device tree parsing in sp804 more robust

 - Dead code removal and tiny fixes here and there

 - Add the missing SPDX identifiers

* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
  clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
  clocksource/drivers/timer-sun5i: Convert to SPDX identifier
  clocksource/drivers/timer-sun4i: Convert to SPDX identifier
  clocksource/drivers/pistachio: Convert to SPDX identifier
  clocksource/drivers/orion: Convert to SPDX identifier
  clocksource/drivers/lpc32xx: Convert to SPDX identifier
  clocksource/drivers/digicolor: Convert to SPDX identifier
  clocksource/drivers/armada-370-xp: Convert to SPDX identifier
  clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
  clocksource/drivers/jcore: Convert to SPDX identifier
  clocksource/drivers/bcm_kona: Convert to SPDX identifier
  clocksource/drivers/sp804: Avoid error on multiple instances
  clocksource/drivers/riscv: Events are stopped during CPU suspend
  clocksource/drivers/ixp4xx: Drop boardfile probe path
  dt-bindings: timer: Add compatible for Mediatek MT8186

Pull scheduler fix from Thomas Gleixner:
 "Fix the fallout of sysctl code move which placed the init function
  wrong"

* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Fix sysctl move

Pull perf fixes from Thomas Gleixner:

  - Make the ICL event constraints match reality

  - Remove a unused local variable

* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Remove unused local variable
  perf/x86/intel: Fix event constraints for ICL

Pull perf fixlet from Thomas Gleixner:
 "Trivial indentation fix in Kconfig"

* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/Kconfig: Fix indentation in the Kconfig file

Pull objtool fixes from Thomas Gleixner:

 - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
   noreturn

 - Allow architectures to select uaccess validation

 - Use the non-instrumented bit test for test_cpu_has() to prevent
   escape from non-instrumentable regions

 - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
   from non-instrumentable regions

 - Mark a few tiny inline as __always_inline to prevent GCC from
   bringing them out of line and instrumenting them

 - Mark the empty stub context_tracking_enabled() as always inline as
   GCC brings them out of line and instruments the empty shell

 - Annotate ex_handler_msr_mce() as dead end

* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/extable: Annotate ex_handler_msr_mce() as a dead end
  context_tracking: Always inline empty stubs
  x86: Always inline on_thread_stack() and current_top_of_stack()
  jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
  x86/cpu: Elide KCSAN for cpu_has() and friends
  objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
  objtool: Add CONFIG_HAVE_UACCESS_VALIDATION

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes plus other trivial updates.

  The major change of note is moving ufs out of scsi and a minor update
  to lpfc vmid handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
  scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
  scsi: mpi3mr: Fix kernel-doc
  scsi: lpfc: Add support for ATTO Fibre Channel devices
  scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
  scsi: sd_zbc: Prevent zone information memory leak
  scsi: sd: Fix potential NULL pointer dereference
  scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
  scsi: myrb: Fix up null pointer access on myrb_cleanup()
  scsi: core: Unexport scsi_bus_type
  scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
  scsi: ufs: ufshcd: Delete unnecessary NULL check
  scsi: isci: Fix typo in comment
  scsi: pmcraid: Fix typo in comment
  scsi: smartpqi: Fix typo in comment
  scsi: qedf: Fix typo in comment
  scsi: esas2r: Fix typo in comment
  scsi: storvsc: Fix typo in comment
  scsi: ufs: Split the drivers/scsi/ufs directory
  scsi: qla1280: Remove redundant variable
  ...

Pull hardware timestamping subsystem from Thierry Reding:
 "This contains the new HTE (hardware timestamping engine) subsystem
  that has been in the works for a couple of months now.

  The infrastructure provided allows for drivers to register as hardware
  timestamp providers, while consumers will be able to request events
  that they are interested in (such as GPIOs and IRQs) to be timestamped
  by the hardware providers.

  Note that this currently supports only one provider, but there seems
  to be enough interest in this functionality and we expect to see more
  drivers added once this is merged"

[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
  platforms as another future timestamp provider ]

* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: timestamp: Correct id path
  dt-bindings: Renamed hte directory to timestamp
  hte: Uninitialized variable in hte_ts_get()
  hte: Fix off by one in hte_push_ts_ns()
  hte: Fix possible use-after-free in tegra_hte_test_remove()
  hte: Remove unused including <linux/version.h>
  MAINTAINERS: Add HTE Subsystem
  hte: Add Tegra HTE test driver
  tools: gpio: Add new hardware clock type
  gpiolib: cdev: Add hardware timestamp clock type
  gpio: tegra186: Add HTE support
  gpiolib: Add HTE support
  dt-bindings: Add HTE bindings
  hte: Add Tegra194 HTE kernel provider
  drivers: Add hardware timestamp engine (HTE) subsystem
  Documentation: Add HTE subsystem guide