- 14 Jul, 2020 7 commits
-
-
Maarten Lankhorst authored
This fixes the following KASAN splash on module reload: [ 145.136327] ================================================================== [ 145.136502] BUG: KASAN: use-after-free in intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136514] Read of size 8 at addr ffff888216641830 by task kworker/1:1/134 [ 145.136535] CPU: 1 PID: 134 Comm: kworker/1:1 Tainted: G U T 5.5.0-rc7-valkyria+ #5783 [ 145.136539] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016 [ 145.136546] Workqueue: events drm_connector_free_work_fn [ 145.136551] Call Trace: [ 145.136560] dump_stack+0xa1/0xe0 [ 145.136571] print_address_description.constprop.0+0x1e/0x210 [ 145.136639] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136703] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136710] __kasan_report.cold+0x1b/0x37 [ 145.136790] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136863] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136870] kasan_report+0x27/0x30 [ 145.136881] __asan_report_load8_noabort+0x1c/0x20 [ 145.136946] intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136954] drm_connector_free_work_fn+0xd1/0x100 [ 145.136967] process_one_work+0x86e/0x1610 [ 145.136987] ? pwq_dec_nr_in_flight+0x2f0/0x2f0 [ 145.137004] ? move_linked_works+0x128/0x2c0 [ 145.137021] worker_thread+0x63e/0xc90 [ 145.137048] kthread+0x2f6/0x3f0 [ 145.137054] ? calculate_sigpending+0x81/0xa0 [ 145.137059] ? process_one_work+0x1610/0x1610 [ 145.137064] ? kthread_bind+0x40/0x40 [ 145.137075] ret_from_fork+0x24/0x30 [ 145.137111] Allocated by task 0: [ 145.137119] (stack is not available) [ 145.137137] Freed by task 5053: [ 145.137147] save_stack+0x28/0x90 [ 145.137152] __kasan_slab_free+0x136/0x180 [ 145.137157] kasan_slab_free+0x26/0x30 [ 145.137161] kfree+0xe6/0x350 [ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915] [ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0 [ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915] [ 145.137403] i915_driver_remove+0xc4/0x130 [i915] [ 145.137482] i915_pci_remove+0x3e/0x90 [i915] [ 145.137489] pci_device_remove+0x108/0x2d0 [ 145.137494] device_release_driver_internal+0x1e6/0x4a0 [ 145.137499] driver_detach+0xcb/0x198 [ 145.137503] bus_remove_driver+0xde/0x204 [ 145.137508] driver_unregister+0x6d/0xa0 [ 145.137513] pci_unregister_driver+0x2e/0x230 [ 145.137576] i915_exit+0x1f/0x26 [i915] [ 145.137157] kasan_slab_free+0x26/0x30 [ 145.137161] kfree+0xe6/0x350 [ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915] [ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0 [ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915] [ 145.137403] i915_driver_remove+0xc4/0x130 [i915] [ 145.137482] i915_pci_remove+0x3e/0x90 [i915] [ 145.137489] pci_device_remove+0x108/0x2d0 [ 145.137494] device_release_driver_internal+0x1e6/0x4a0 [ 145.137499] driver_detach+0xcb/0x198 [ 145.137503] bus_remove_driver+0xde/0x204 [ 145.137508] driver_unregister+0x6d/0xa0 [ 145.137513] pci_unregister_driver+0x2e/0x230 [ 145.137576] i915_exit+0x1f/0x26 [i915] [ 145.137581] __x64_sys_delete_module+0x35b/0x470 [ 145.137586] do_syscall_64+0x99/0x4e0 [ 145.137591] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 145.137606] The buggy address belongs to the object at ffff888216640000 which belongs to the cache kmalloc-8k of size 8192 [ 145.137618] The buggy address is located 6192 bytes inside of 8192-byte region [ffff888216640000, ffff888216642000) [ 145.137630] The buggy address belongs to the page: [ 145.137640] page:ffffea0008599000 refcount:1 mapcount:0 mapping:ffff888107c02a80 index:0xffff888216644000 compound_mapcount: 0 [ 145.137647] raw: 0200000000010200 0000000000000000 0000000100000001 ffff888107c02a80 [ 145.137652] raw: ffff888216644000 0000000080020001 00000001ffffffff 0000000000000000 [ 145.137656] page dumped because: kasan: bad access detected [ 145.137668] Memory state around the buggy address: [ 145.137678] ffff888216641700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137687] ffff888216641780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137697] >ffff888216641800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137706] ^ [ 145.137715] ffff888216641880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137724] ffff888216641900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137733] ================================================================== [ 145.137742] Disabling lock debugging due to kernel taint Changes since v1: - Add fixes tags. - Use early unregister. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 9c229127 ("drm/i915: hdmi: add CEC notifier to intel_hdmi") Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200212135445.1469133-1-maarten.lankhorst@linux.intel.com
-
Lucas De Marchi authored
DG1 has the south engine display on the same PCI device. Ideally we could use HAS_PCH_SPLIT(), but that macro is misused all across the code base to rather signify a range of gens. So add a fake one for DG1 to be used where needed. Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-6-lucas.demarchi@intel.com
-
Anusha Srivatsa authored
Bspec asks us to remove the special programming of the SHPD_FILTER_CNT register which we have been doing since CNP+. Bspec: 49305 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-5-lucas.demarchi@intel.com
-
Lucas De Marchi authored
DG1 has master unit interrupt register which is used to indicate the correct source of interrupt. v2: fix coding style on register definition Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Abdiel Janulgue authored
Add the PCI ID for DG1, but keep it out of the table we use to register the driver. At this point we can't consider the driver ready to bind to the device since we basically miss support for everything. When more support is merged we can enable it to work partially for example as a display-only driver. v2: remove DG1 from the pci table and reword commit message (Lucas) Bspec: 44463 Cc: Matthew Auld <matthew.auld@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
-
Abdiel Janulgue authored
Bspec: 33617, 33617 v2: s/intel_dg1_info/dg1_info/ as done for other platforms before and try to shut up compiler about ununsed variable that we know shouldn't be used (Lucas) v3: replace explicit attribute with __maybe_unused (Lucas) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Vanshidhar Konda <vanshidhar.r.konda@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: -
Stuart Summers authored
Add flag to differentiate platforms with and without the master IRQ control bit. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
- 13 Jul, 2020 8 commits
-
-
Ville Syrjälä authored
According to the DP spec a DPTX must support vswing/pre-emphasis up to and including level 2. Level 3 is optional (actually DP 1.4a seems to make even level 3 mandatory for HBR2/3, while leaving it optional for RBR/HBR1). WARN if out encoders' .voltage_max()/.preemph_max() return an illegal value. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Lee Shawn C authored
So far, max dot clock rate for MST mode rely on physcial bandwidth limitation. It would caused compatibility issue if source display resolution exceed MST hub output ability. For example, source DUT had DP 1.2 output capability. And MST docking just support HDMI 1.4 spec. When a HDMI 2.0 monitor connected. Source would retrieve EDID from external and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps because it did not surpass DP physical bandwidth limitation. Do modeset to 4k@60fps, source output display data but MST docking can't output HDMI properly due to this resolution already over HDMI 1.4 spec. Refer to commit <fcf46380> ("drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks"). Source driver should refer to full_pbn to evaluate sink output capability. And filter out the resolution surpass sink output limitation. Changes since v1: * Using mgr->base.lock to protect full_pbn. Changes since v2: * Add ctx lock. Changes since v3: * s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/ intel_dp_mst_mode_clock_exceeds_pbn_bw/ * Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe down the drm_modeset_acquire_ctx that the probe helpers are using, so we can safely grab &mgr->base.lock without deadlocking Changes since v4: * Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn check * Fix the bpp we use in drm_dp_calc_pbn_mode() * Drop leftover (!mgr) check * Don't check for if full_pbn is unset. To be clear - it _can_ be unset, but if it is then it's certainly a bug in DRM or a non-compliant sink as full_pbn should always be populated by the time we call ->mode_valid_ctx. We should workaround non-compliant sinks with full_pbn=0, but that should happen in the DP MST helpers so we can estimate the full_pbn value as best we can. Tested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Lyude Paul authored
This is just an atomic version of mode_valid, which is intended to be used for situations where a driver might need to check the atomic state of objects other than the connector itself. One such example is with MST, where the maximum possible bandwidth on a connector can change dynamically irregardless of the display configuration. Changes since v1: * Use new drm logging functions * Make some corrections in the mode_valid_ctx kdoc * Return error codes or 0 from ->mode_valid_ctx() on fail, and store the drm_mode_status in an additional function parameter Changes since v2: * Don't accidentally assign ret to mode->status on success, or we'll squash legitimate mode validation results * Don't forget to assign MODE_OK to status in drm_connector_mode_valid() if we have no callbacks * Drop leftover hunk in drm_modes.h around enum drm_mode_status Changes since v3: * s/return ret/return 0/ in drm_mode_validate_pipeline() * Minor cleanup in drm_connector_mode_valid() Tested-by:
-
Chris Wilson authored
Preempt-to-busy introduces various fascinating complications in that the requests may complete as we are unsubmitting them from HW. As they may then signal after unsubmission, we may find ourselves having to cleanup the signaling request from within the signaling callback. This causes us to recurse onto the same i915_request.lock. However, if the request is already signaled (as it will be before we enter the signal callbacks), we know we can skip the signaling of that request during submission, neatly evading the spinlock recursion. unsubmit(ve.rq0) # timeslice expiration or other preemption -> virtual_submit_request(ve.rq0) dma_fence_signal(ve.rq0) # request completed before preemption ack -> submit_notify(ve.rq1) -> virtual_submit_request(ve.rq1) # sees that we have completed ve.rq0 -> __i915_request_submit(ve.rq0) [ 264.210142] BUG: spinlock recursion on CPU#2, sample_multi_tr/2093 [ 264.210150] lock: 0xffff9efd6ac55080, .magic: dead4ead, .owner: sample_multi_tr/2093, .owner_cpu: 2 [ 264.210155] CPU: 2 PID: 2093 Comm: sample_multi_tr Tainted: G U [ 264.210158] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X212.B01.1909060036 09/06/2019 [ 264.210160] Call Trace: [ 264.210167] dump_stack+0x98/0xda [ 264.210174] spin_dump.cold+0x24/0x3c [ 264.210178] do_raw_spin_lock+0x9a/0xd0 [ 264.210184] _raw_spin_lock_nested+0x6a/0x70 [ 264.210314] __i915_request_submit+0x10a/0x3c0 [i915] [ 264.210415] virtual_submit_request+0x9b/0x380 [i915] [ 264.210516] submit_notify+0xaf/0x14c [i915] [ 264.210602] __i915_sw_fence_complete+0x8a/0x230 [i915] [ 264.210692] i915_sw_fence_complete+0x2d/0x40 [i915] [ 264.210762] __dma_i915_sw_fence_wake+0x19/0x30 [i915] [ 264.210767] dma_fence_signal_locked+0xb1/0x1c0 [ 264.210772] dma_fence_signal+0x29/0x50 [ 264.210871] i915_request_wait+0x5cb/0x830 [i915] [ 264.210876] ? dma_resv_get_fences_rcu+0x294/0x5d0 [ 264.210974] i915_gem_object_wait_fence+0x2f/0x40 [i915] [ 264.211084] i915_gem_object_wait+0xce/0x400 [i915] [ 264.211178] i915_gem_wait_ioctl+0xff/0x290 [i915] Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") References: 6d06779e ("drm/i915: Load balancing across a virtual engine") Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713141636.29326-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The danger in switching at random upon intel_context_pin is that the context may still actually be inflight, as it will not be scheduled out until a context switch after it is complete -- that may be a long time after we do a final intel_context_unpin. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118 Fixes: 6d06779e ("drm/i915: Load balancing across a virtual engine") Signed-off-by:
-
Colin Ian King authored
There is an error condition where err is not being set and an uninitialized garbage value in err is being returned. Fix this by assigning err to an appropriate error return value before taking the error exit path. Addresses-Coverity: ("Uninitialized scalar value") Fixes: ed2690a9 ("drm/i915/selftest: Check that GPR are restored across noa_wait") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Chris Wilson authored
We do not use the virtual engines for interrupts (they have physical components), but we do use them to decouple the fence signaling during submission. Currently, when we submit a completed request, we try to enable the interrupt handler for the virtual engine, but we never disarm it. A quick fix is then to mark the irq as enabled, and it will then remain enabled -- and this prevents us from waking the device and never letting it sleep again. Fixes: f8db4d05 ("drm/i915: Initialise breadcrumb lists on the virtual engine") Signed-off-by:
-
Chris Wilson authored
If something has gone awry with the CSB processing, we need to pause, unwind and restart the request submission and event processing. However, currently we skip the engine reset if we raise an error but discover no active context, in the mistaken belief that it was merely a glitch in the matrix. The glitches are real enough, and we do need to unwind even if the engine appears idle (as it has gone permanently idle!) The simplest way to unwind and recover is simply do the engine reset, which should be very fast and _safe_ as nothing is active. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200711091349.28865-1-chris@chris-wilson.co.uk
-
- 10 Jul, 2020 4 commits
-
-
Chris Wilson authored
We try not to assume that we captured any information, and so have to check that error->gt exists before reporting. This check was missed in err_print_capabilities, so lets break up the capability info and push it into the GT dump. We are still a long way from yamlifying this output! Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 792592e7 ("drm/i915: Move the engine mask to intel_gt_info") Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200710193239.5419-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the HW throws a curve ball and reports either en event before it is possible, or just a completely impossible event, we have to grin and bear it. The first few events, we will likely not notice as we would be expecting some event, but as soon as we stop expecting an event and yet they still keep coming, then we enter into undefined state territory. In which case, bail out, stop processing the events, and reset the engine and our set of queued requests to recover. The sporadic hangs and warnings will continue to plague CI, but at least system stability should not be compromised. v2: Commentary and force the reset-on-error. v3: Customised user facing message for forced resets from internal errors. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045Signed-off-by:
-
Chris Wilson authored
Perf implements a GPU delay (noa_wait) by looping until the CS timestamp has passed a certain point. This use MI_MATH and the general purpose registers of the user's context, and since it is clobbering the user state it must carefully save and restore the user's data around the noa_wait. We can verify this by loading some values in the GPR that we know will be clobbered by the noa_wait, and then inspecting the GPR after the noa_wait completes and confirming that they have been restored. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-2-chris@chris-wilson.co.uk
-
Umesh Nerlige Ramappa authored
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which translation to use when saving restoring the engine general purpose registers to and from the GT scratch. Since GT scratch is mapped to ggtt, we need to set an additional bit in the command to use GTT. Fixes: daed3e44 ("drm/i915/perf: implement active wait for noa configurations") Suggested-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
-
- 09 Jul, 2020 16 commits
-
-
Chris Wilson authored
Since the aliasing-ppgtt remains the default for gen6/gen7, it is worth optimising the ppgtt allocation for it. In this case, we do not need to flush the GGTT page directories entries as they are fixed during setup. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200709190111.5492-1-chris@chris-wilson.co.uk
-
José Roberto de Souza authored
HOBL means hours of battery life, it is a power-saving feature were supported motherboards can use a special voltage swing table that uses less power. So here parsing the VBT to check if this feature is supported. BSpec: 20150 Reviewed-by:
-
José Roberto de Souza authored
This information can be get directly from intel_encoder so no need of those parameters. Signed-off-by:
-
José Roberto de Souza authored
intel_encoder will be needed inside of vswing functions in a future patch, so here doing this change in all vswing functions since HSW. Signed-off-by:
-
Sudeep Holla authored
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value at those pointers. This will result in incorrect/unsorted list. Fix it by deferencing the pointers before comparison. Fixes: 4ba74e53 ("drm/i915/selftests: Verify frequency scaling with RPS") Fixes: 8757797f ("drm/i915/selftests: Repeat the rps clock frequency measurement") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
-
José Roberto de Souza authored
As today those 2 WAs have different implementation between TGL and DG1 WA pages but checking the HSD it is clear that DG1 implementation should be used for both, also to do so is easier as we just need to extend WA 1407928979 to B* stepping. Both WAs are need to fix some possible render corruptions. DG1 initial patches were not merged yet, as soon it is this WAs should be applied to DG1 as well. BSpec: 53508 BSpec: 52890 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Pimp the comments for the FBC related workarounds. Signed-off-by:
-
Ville Syrjälä authored
Supposedly only skl/bxt need WaFbcHighMemBwCorruptionAvoidance. Do not apply to the other gen9 platforms. Signed-off-by:
-
Ville Syrjälä authored
GLK supposedly does not need WaFbcTurnOffFbcWatermark, so let's not apply it. Signed-off-by:
-
Ville Syrjälä authored
Some platforms apply the FBC w/as in .init_clock_gating(), some in fbc_activate(). Move them all to .init_clock_gating() for consistentce. Also safer since we don't have to worry about the RMWs clashing with any other runtime use of the same registers. Signed-off-by:
-
Ville Syrjälä authored
.get_modes() is supposed to return the number of modes added to the probed_modes list (not that anyone actually checks for anything except zero vs. not zero). Let's do that. Signed-off-by:
-
Ville Syrjälä authored
.get_modes() is supposed to return the number of modes added to the probed_modes list (not that anyone actually checks for anything except zero vs. not zero). Let's do that. Also switch over to using intel_connector_update_modes() instead of hand rolling it. Signed-off-by:
-
Ville Syrjälä authored
With SDVO the pipe config pixel_multiplier only concerns itself with the data on the SDVO bus. Any HDMI specific pixel repeat must be handled by the SDVO device itself. To do that simply configure the SDVO pixel replication factor appropriately. We already set up the infoframe PRB values correctly via the infoframe helpers. There is no cap we can check for this. The spec says that 1X,2X,4X are mandatory, anything else is optional. 1X and 2X are all we need so we should be able to assume they work. Signed-off-by:
-
Ville Syrjälä authored
The code assumes that DRM_MODE_FLAG_DBLCLK means that we enable the pixel repeat feature. That only works with HDMI since it requires AVI infoframe to signal the information to the sink. Hence even if the mode dotclock would be valid we cannot currently assume that we can just ignore the DBLCLK flag. Reject it for DVI sinks. Signed-off-by:
-
Ville Syrjälä authored
The SDVO/HDMI port register limited color range bit can only be used with TMDS encoding and not SDVO encoding, ie. to be used only when using the port as a HDMI port as opposed to a SDVO port. The SDVO spec does have a note that some GMCHs might allow that, but gen4 bspec vehemently disagrees. I suppose on ILK+ it might work since the color range handling is on the CPU side rather than on the PCH side, so there is no clear linkage between the TMDS vs. SDVO encoding and color range. Alas, I have no hardware to test that theory. To implement limited color range support for SDVO->HDMI we need to ask the SDVO device to do the range compression. Do so, but first check if the device even supports the colorimetry selection. Signed-off-by:
-
Ville Syrjälä authored
Fix up the SDVO colorimetry bits to match the spec. Signed-off-by:
-
- 08 Jul, 2020 5 commits
-
-
Chris Wilson authored
Last user removed, remove the get_dirty_page convenience function. Signed-off-by:
-
Chris Wilson authored
Some objects we map once during their construction, and then never access their mappings again, even if they are kept around for the duration of the driver. Keeping those pages mapped, often vmapped, is therefore wasteful and we should release the maps as soon as we no longer need them. Signed-off-by:
-
Chris Wilson authored
As we have a pin_map interface, that knows how to flush the data to the device, use it. The only downside is that we keep the kmap around, as once acquired we keep the mapping cached until the object's backing store is released. Signed-off-by:
-
Chris Wilson authored
We removed retiring requests from the shrinker in order to decouple the mutexes from reclaim in preparation for unravelling the struct_mutex. The impact of not retiring is that we are much less agressive in making global objects available for shrinking, as such objects remain pinned until they are flushed by a heartbeat pulse following the last retired request along their timeline. In order to ensure that pulse occurs in time for memory reclamation, we should kick it from kswapd. The catch is that we have added some flush_work() into the retirement phase (to ensure that we reach a global idle in a timely manner), but these flush_work() are not eligible (i.e do not belong to WQ_MEM_RELCAIM) for use from inside kswapd. To avoid flushing those workqueues, we teach the retirer not to do so unless we are actually waiting, and only do the plain retire from inside the shrinker. Note that for execlists, we already retire completed contexts as they are scheduled out, so it should not be keeping global state unnecessarily pinned. The legacy ringbuffer however... References: 9e953980 ("drm/i915: Remove waiting & retiring from shrinker paths") Signed-off-by:
-
Daniele Ceraolo Spurio authored
In line with what happened for other gt-related features, move the sseu debugfs files under gt/. The sseu_status debugfs has also been kept at the top level as we do have tests that use it; it will be removed once we teach the tests to look into the new path. Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
