- 10 Sep, 2019 36 commits
-
-
Tho Vu authored
[ Upstream commit cfef46d6 ] When a Tx timestamp is requested, a pointer to the skb is stored in the ravb_tstamp_skb struct. This was done without an skb_get. There exists the possibility that the skb could be freed by ravb_tx_free (when ravb_tx_free is called from ravb_start_xmit) before the timestamp was processed, leading to a use-after-free bug. Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate frees/consumes when a ravb_tstamp_skb struct is freed. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Tho Vu <tho.vu.wh@rvc.renesas.com> Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wenwen Wang authored
[ Upstream commit 44ef3a03 ] In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup() to hold the original command line options. Then, the options are parsed. However, if an error occurs during the parsing process, 'options_orig' is not deallocated, leading to a memory leak bug. To fix this issue, free 'options_orig' before returning the error. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 34343410 ] The driver name gets exposed in sysfs under /sys/bus/pci/drivers so it should look like other devices. Change it to be common format (instead of "Cavium PTP"). This is a trivial fix that was observed by accident because Debian kernels were building this driver into kernel (bug). Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 80f0fe09 ] There's no need to wait until a completion is received to unmap TX descriptor buffers that have been passed to the hypervisor. Instead unmap it when the hypervisor call has completed. This patch avoids the possibility that a buffer will not be unmapped because a TX completion is lost or mishandled. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by:
Devesh K. Singh <devesh_singh@in.ibm.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit f1472cb0 ] In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through kmalloc(). In the following execution, if the 'status' returned by kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 1eca92ee ] In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc(). Then, the execution waits for the firmware to become ready. If the firmware is not ready in time, the execution is terminated. However, the allocated 'dev->partial_data' is not deallocated on this path, leading to a memory leak bug. To fix this issue, free 'dev->partial_data' before returning the error. Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit edc58dd0 ] When dedupe wants to use the page cache to compare parts of two files for dedupe, we must be very careful to handle locking correctly. The current code doesn't do this. It must lock and unlock the page only once if the two pages are the same, since the overlapping range check doesn't catch this when blocksize < pagesize. If the pages are distinct but from the same file, we must observe page locking order and lock them in order of increasing offset to avoid clashing with writeback locking. Fixes: 876bec6f ("vfs: refactor clone/dedupe_file_range common functions") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit b9cbf8a6 ] In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and saved to 'dev->urb_intr'. However, in the following execution, if an error occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix this issue, invoke usb_free_urb() to free the allocated urb before returning from the function. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 20fb7c7a ] In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 6f967f8b ] If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, invoke octeon_delete_instr_queue() before returning from the function. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit c554336e ] In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by:
-
Dmitry Fomichev authored
[ Upstream commit a86a7586 ] In tcmu_handle_completion() function, the variable called read_len is always initialized with a value taken from se_cmd structure. If this function is called to complete an expired (timed out) out command, the session command pointed by se_cmd is likely to be already deallocated by the target core at that moment. As the result, this access triggers a use-after-free warning from KASAN. This patch fixes the code not to touch se_cmd when completing timed out TCMU commands. It also resets the pointer to se_cmd at the time when the TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid after calling target_complete_cmd() later in the same function, tcmu_check_expired_cmd(). Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by:
Mike Christie <mchristi@redhat.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bill Kuzeja authored
[ Upstream commit 26fa656e ] If HBA initialization fails unexpectedly (exiting via probe_failed:), we may fail to free vha->gnl.l. So that we don't attempt to double free, set this pointer to NULL after a free and check for NULL at probe_failed: so we know whether or not to call dma_free_coherent. Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Alexandre Courbot authored
[ Upstream commit 07095555 ] This driver requires imported PRIME buffers to appear contiguously in its IO address space. Make sure this is the case by setting the maximum DMA segment size to a more suitable value than the default 64KB. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
-
Alexandre Courbot authored
[ Upstream commit 4c6f3196 ] PRIME buffers should be imported using the DMA device. To this end, use a custom import function that mimics drm_gem_prime_import_dev(), but passes the correct device. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit dfe42be1 ] TCP rst and fin packets do not qualify to place a flow into the flowtable. Most likely there will be no more packets after connection closure. Without this patch, this flow entry expires and connection tracking picks up the entry in ESTABLISHED state using the fixup timeout, which makes this look inconsistent to the user for a connection that is actually already closed. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 68e03b85 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 964cb341 ("gpio: move pincontrol calls to <linux/gpio/driver.h>") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 66cf4710 ] The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 8059ba0b ] On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 125b7e09 ] clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928d ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 6d0d779d ] This fixes a warning of "suspicious rcu_dereference_check() usage" when nload runs. Fixes: 776e726b ("netvsc: fix RCU warning in get_stats") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit b3e78adc ] Change an error message to work for any object being pinned not just programs. Fixes: 71bb428f ("tools: bpf: add bpftool") Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 6a0a8d10 ] If a rule that has already a bound anonymous set fails to be added, the preparation phase releases the rule and the bound set. However, the transaction object from the abort path still has a reference to the set object that is stale, leading to a use-after-free when checking for the set->bound field. Add a new field to the transaction that specifies if the set is bound, so the abort path can skip releasing it since the rule command owns it and it takes care of releasing it. After this update, the set->bound field is removed. [ 24.649883] Unable to handle kernel paging request at virtual address 0000000000040434 [ 24.657858] Mem abort info: [ 24.660686] ESR = 0x96000004 [ 24.663769] Exception class = DABT (current EL), IL = 32 bits [ 24.669725] SET = 0, FnV = 0 [ 24.672804] EA = 0, S1PTW = 0 [ 24.675975] Data abort info: [ 24.678880] ISV = 0, ISS = 0x00000004 [ 24.682743] CM = 0, WnR = 0 [ 24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000 [ 24.692207] [0000000000040434] pgd=0000000000000000 [ 24.697119] Internal error: Oops: 96000004 [#1] SMP [...] [ 24.889414] Call trace: [ 24.891870] __nf_tables_abort+0x3f0/0x7a0 [ 24.895984] nf_tables_abort+0x20/0x40 [ 24.899750] nfnetlink_rcv_batch+0x17c/0x588 [ 24.904037] nfnetlink_rcv+0x13c/0x190 [ 24.907803] netlink_unicast+0x18c/0x208 [ 24.911742] netlink_sendmsg+0x1b0/0x350 [ 24.915682] sock_sendmsg+0x4c/0x68 [ 24.919185] ___sys_sendmsg+0x288/0x2c8 [ 24.923037] __sys_sendmsg+0x7c/0xd0 [ 24.926628] __arm64_sys_sendmsg+0x2c/0x38 [ 24.930744] el0_svc_common.constprop.0+0x94/0x158 [ 24.935556] el0_svc_handler+0x34/0x90 [ 24.939322] el0_svc+0x8/0xc [ 24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863) [ 24.948336] ---[ end trace cebbb9dcbed3b56f ]--- Fixes: f6ac8585 ("netfilter: nf_tables: unbind set in rule from commit path") Signed-off-by:
-
Fuqian Huang authored
[ Upstream commit 8c25d088 ] As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Martin Sperl authored
[ Upstream commit 73b114ee ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by:
Hubert Denkmair <h.denkmair@intence.de> Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Sperl authored
[ Upstream commit c7de8500 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by:
-
Martin Sperl authored
[ Upstream commit 7188a6f0 ] Sharing more code between polling and interrupt-driven mode. Signed-off-by:
-
John S. Gruber authored
commit 29d9a0b5 upstream. Commit a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") now zeroes the secure boot setting information (enabled/disabled/...) passed by the boot loader or by the kernel's EFI handover mechanism. The problem manifests itself with signed kernels using the EFI handoff protocol with grub and the kernel loses the information whether secure boot is enabled in the firmware, i.e., the log message "Secure boot enabled" becomes "Secure boot could not be determined". efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it is subsequently zeroed by the above referenced commit. Include boot_params.secure_boot in the preserve field list. [ bp: restructure commit message and massage. ] Fixes: a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") Signed-off-by:
John S. Gruber <JohnSGruber@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ka-Cheong Poon authored
[ Upstream commit 7d0a0658 ] The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb45036 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support") Reported-by:
黄ID蝴蝶 <butterflyhuangxx@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit fdfc5c85 ] Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by:
Vladimir Rutsky <rutsky@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 888a5c53 ] TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765 ("net-timestamp: TCP timestamping") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 3b25528e ] The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 981471bd ] The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit dbf47a2a ] Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Feng Sun authored
[ Upstream commit 2c1644cf ] After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by:
Feng Sun <loyou85@gmail.com> Signed-off-by:
Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a84d0164 ] Similar to the fix done for IPv4 in commit e5b1c6c6 ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 06 Sep, 2019 4 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Tissoires authored
This reverts commit 3d180fe5 which is commit 883a2a80 upstream. This patch depends on an other series: https://patchwork.kernel.org/project/linux-input/list/?series=122327&state=%2A&archive=both It was a mistake to backport it in the v5.2 branch, as there is a high chance we encounter a touchpad that needs the series above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=204733 Link: https://bugzilla.kernel.org/show_bug.cgi?id=204771Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 714a8438 which is commit 40aa5383 upstream. Mark Brown writes: I nacked this patch when Sasha posted it - it only improves diagnostics and might make systems that worked by accident break since it turns things into a hard failure, it won't make anything that didn't work previously work. Reported-by:
-
