Add the new rates that were added to Infiniband spec as part of HDR and 2x
support.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add the new 2X port width that is part of IB spec 1.3
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

CapabilityMask2 was added in IB Spec 1.3 under PortInfo attribute.  The
new Capapbility mask is needed in order to expose the new 2X width and HDR
speed.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Array iterator stays at the same slot, fix it.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch implements a cmdq to enable the loopback of ssu module
according to the modified hardware desgin.

The ssu consists of ingress unit, packet buffer and programmable packet
process unit. if the loopback bit of ssu is not enabled, the roce packet
with loopback bit will fail.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch updates the implementation of the mailbox command interface by
using command queue instead of operating registers.  With this update, the
software can be well decoupled with the hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

It will prevent multiply overflow when defines the pbl for u64 type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch move the codes of qp state transition into the new function as
well as simplify the logic for other qp states transition.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

It needs to clear qp context previous when init qp context.  Otherwise,
the newly created qp context residue has the contents of the qp context
before the uninstall, and the qp context content is disordered, causing
the task to fail.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Before calling the driver's function let's make sure port is valid.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Danit Goldberg says:

Packet based credit mode

Packet based credit mode is an alternative end-to-end credit mode for QPs
set during their creation. Credits are transported from the responder to
the requester to optimize the use of its receive resources.  In
packet-based credit mode, credits are issued on a per packet basis.

The advantage of this feature comes while sending large RDMA messages
through switches that are short in memory.

The first commit exposes QP creation flag and the HCA capability. The
second commit adds support for a new DV QP creation flag. The last commit
report packet based credit mode capability via the MLX5DV device
capabilities.

* branch 'mlx5-packet-credit-fc':
  IB/mlx5: Report packet based credit mode device capability
  IB/mlx5: Add packet based credit mode support
  net/mlx5: Expose packet based credit mode
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Report packet based credit mode capability via the mlx5 DV interface.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.

This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Packet based credit mode bit determines whether the credit mode
is done per message or packet. Expose the QP creation flag and
the HCA capability.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Utilize rdma_is_port_valid to validate the given port.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Since the function always returns 0 make it void.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Update UVERBS_OBJECT() macro to properly concatenate the object name.

Fixes: e502a864 ("IB/core: Introduce DECLARE_UVERBS_GLOBAL_METHODS")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Flow table can be passed as a DEVX object which is a valid destination in
an EGRESS flow. Fix the original code to allow that.

Fixes: a7ee18bd ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This fixes a compilation warning in sysfs.c

drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be
truncated copying 8 bytes from a string of length 31
[-Wstringop-truncation]

By eliminating the temporary stack buffer.
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Commit 4e045572 ("IB/hfi1: Add unique txwait_lock for txreq events")
laid the ground work to support per resource waiting locking.

This patch adds that with a lock unique to each sdma engine and pio
sendcontext and makes necessary changes for verbs, PSM, and vnic to use
the new locks.

This is particularly beneficial for smaller messages that will exhaust
resources at a faster rate.

Fixes: 77241056 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle.  If that happens, there will be no
more sdma interrupts to cause the wakeup and the vnic_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete the tx_retry. The need for this was removed by:
commit bcad2913 ("IB/hfi1: Serve the most starved iowait entry first")

Fixes: 64551ede ("IB/hfi1: VNIC SDMA support")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch adds an interface to allow the driver to initialize the QP priv
struct when the QP is created and after the qpn has been assigned.  A
field is added to the QP priv struct to reference the rcd and two new
files are added to contain the function to initialize the rcd field so
that more TID RDMA related code can be added here later.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The OPFN and TID RDMA capability bits are added to allow users to control
which feature is enabled and disabled.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently, When a reserved operation is completed, its entry in the send
queue will not be unreserved, which leads to the miscalculation of
qp->s_avail and thus the triggering of a WARN_ON call trace. This patch
fixes the problem by unreserving the reserved operation when it is
completed.

Fixes: 856cc4c2 ("IB/hfi1: Add the capability for reserved operations")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Ingress packet check for 16B/bypass packets should consider the port
LMC. Not doing this will result in packets sent to the LMC LIDs getting
dropped. The check is implemented in HW for 9B packets.
Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to
this:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1]
PGD 0
Oops: 0000 1 SMP
 Call Trace:
 ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1]
 hfi1_verbs_send+0xdf/0x250 [hfi1]
 ? make_rc_ack+0xa80/0xa80 [hfi1]
 hfi1_do_send+0x192/0x430 [hfi1]
 hfi1_do_send_from_rvt+0x10/0x20 [hfi1]
 rvt_post_send+0x369/0x820 [rdmavt]
 ib_uverbs_post_send+0x317/0x570 [ib_uverbs]
 ib_uverbs_write+0x26f/0x420 [ib_uverbs]
 ? security_file_permission+0x21/0xa0
 vfs_write+0xbd/0x1e0
 ? mntput+0x24/0x40
 SyS_write+0x7f/0xe0
 system_call_fastpath+0x16/0x1b

Fix by adding the missing sizing check to correctly determine the sge
length.

Fixes: 77241056 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

VNIC assumes that all SDMA engines have been configured for use.  This is
not necessarily true (i.e. if the count was constrained by the module
parameter).

Update VNICs usage to use the configured count, rather than the hardware
count.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A CA is supposed to ignore FECN bits in multicast, ACK, and CNP
packets. This patch corrects the behavior of the HFI1 driver in this
regard by ignoring FECNs in those packet types.

While fixing the above behavior, fix the extraction of the FECN and BECN
bits from the packet headers for both 9B and 16B packets.

Furthermore, this patch corrects the driver's response to a FECN in RDMA
READ RESPONSE packets. Instead of sending an "empty" ACK, the driver now
sends a CNP packet. While editing that code path, add the missing trace
for CNP packets.

Fixes: 88733e3b ("IB/hfi1: Add 16B UD support")
Fixes: f59fb9e0 ("IB/hfi1: Fix handling of FECN marked multicast packet")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When it is requested to change its physical state back to Offline while in
the process to go up, DC8051 will set the ERROR field in the
DC8051_DBG_ERR_INFO_SET_BY_8051 register. This ERROR field will remain
until the next time when DC8051 transitions from Offline to Polling.
Subsequently, when the host requests DC8051 to change its physical state
to Polling again, it may receive a DC8051 interrupt with the stale ERROR
field still in DC8051_DBG_ERR_INFO_SET_BY_8051. If the host link state has
been changed to Polling, this stale ERROR will force the host to
transition to Offline state, resulting in a vicious cycle of Polling
->Offline->Polling->Offline. On the other hand, if the host link state is
still Offline when the stale ERROR is received, the stale ERROR will be
ignored, and the link will come up correctly.  This patch implements the
correct behavior by changing host link state to Polling only after DC8051
changes its physical state to Polling.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch dumps the pio info for non-user send contexts to assist
debugging in the field.
Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com>
Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch implements the process flow of SRQ asynchronous
event.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch implements the SRQ(Share Receive Queue) verbs
and update the poll cq verbs to deal with SRQ complentions.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch inits hem resource for SRQ table, includes
SRQWQE and SRQWQE index resource.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch configures the flags for enabling the
SRQ(Share Receive Queue) capacity as well as update the
verb of querying device for setting srq specifications.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

From Yishai,
-----------------------------------
This series enriches DEVX support in few aspects: it enables interoperability
between DEVX and verbs and improves mechanism for controlling privileged DEVX
commands.

The first patch updates mlx5 ifc file.

Next 3 patches enable modifying and querying verbs objects via the DEVX
interface.

To achieve that the core layer introduced the 'UVERBS_IDR_ANY_OBJECT' type
to match any IDR object. Once it's used by some driver's method, the
infrastructure skips checking for the IDR type and it becomes the driver
handler responsibility.

The DEVX methods of modify and query were changed to get any object type via
the 'UVERBS_IDR_ANY_OBJECT' mechanism. The type checking is done per object as
part of the driver code.

The next 3 patches introduce more robust mechanism for controlling privileged
DEVX commands. The responsibility to block/allow per command was moved to be
done in the firmware based on the UID credentials that the driver reports upon
user context creation. This enables more granularity per command based on the
device security model and the user credentials.

In addition, by introducing a valid range for 'general commands' we prevent the
need to touch the driver's code any time that a new future command will be
added.

The last patch fixes the XRC verbs flow once a DEVX context is used. This is
needed as XRCD is some shared kernel resource and as such a kernel UID (=0)
should be used in its related resources.

Thanks

Yishai Hadas
-----------------------------------

The top 6 patches are the mlx5-devx series, the remainder are from the
mlx5-next tree as the mlx5-devx series depended on the mlx5-next
mlx5_ifc file update.

* mlx5-devx: (42 commits)
  IB/mlx5: Allow XRC usage via verbs in DEVX context
  IB/mlx5: Update the supported DEVX commands
  IB/mlx5: Enforce DEVX privilege by firmware
  IB/mlx5: Enable modify and query verbs objects via DEVX
  IB/core: Enable getting an object type from a given uobject
  IB/core: Introduce UVERBS_IDR_ANY_OBJECT
  net/mlx5: Update mlx5_ifc with DEVX UCTX capabilities bits
  RDMA/mlx5: Unfold modify RMP function
  RDMA/mlx5: Unfold create RMP function
  RDMA/mlx5: Initialize SRQ tables on mlx5_ib
  RDMA/mlx5: Update SRQ functions signatures to mlx5_ib format
  RDMA/mlx5: Use stages for callback to setup and release DEVX
  RDMA/mlx5: Remove SRQ signature global flag
  net/mlx5: Move SRQ functions to RDMA part
  net/mlx5: Remove references to local mlx5_core functions
  net/mlx5: Remove not-used lib/eq.h header file
  net/mlx5: Remove dead transobj code
  net/mlx5: Align SRQ licenses and copyright information
  net/mlx5: Debug print for forwarded async events
  net/mlx5: Forward SRQ resource events
  ...
Signed-off-by: Doug Ledford <dledford@redhat.com>

Allows XRC usage from the verbs flow in a DEVX context.
As XRCD is some shared kernel resource between processes it should be
created with UID=0 to point on that.

As a result once XRC QP/SRQ are created they must be used as well with
UID=0 so that firmware will allow the XRCD usage.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Update the supported DEVX commands, it includes adding to the
query/modify command's list and to the encoding handling.

In addition, a valid range for general commands was added to be used for
future commands.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Enforce DEVX privilege by firmware, this enables future device
functionality without the need to make driver changes unless a new
privilege type will be introduced.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Enables modify and query verbs objects via the DEVX interface.
To support this the above DEVX handlers were changed to get any
object type via the UVERBS_IDR_ANY_OBJECT mechanism.

The type checking and handling is done per object as part of the
driver code.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Enable getting an object type from a given uobject, the type is saved
upon tree merging and is returned as part of some helper function.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>