- 23 May, 2014 40 commits
-
-
Frank Schaefer authored
[media] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio Both wq_trigger and stream_started are used only to control the em28xx alsa streaming. They don't belong to em28xx common struct. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
The tuner address is only used by the v4l submodule and at tuner setup and can be obtained from the board data directly (if specified). Signed-off-by:
-
Frank Schaefer authored
The tda9887 chipset is part of the analog tuner. Move it out of em28xx-cards. Also, it is used only one time by the v4l2 sub-module at tuner setup. With that, we can get rid of an additional data inside the em28xx common structure. Signed-off-by:
-
Frank Schaefer authored
Move V4L2-specific frequency cache to struct em28xx_v4l2. Signed-off-by:
-
Frank Schaefer authored
Despite being at the common em28xx struct, those two fields are actually taking into account only the usage inside em28xx v4l2 submodule. So, move them out of the common struct. Signed-off-by:
-
Frank Schaefer authored
Move some temporary capture tracking date to the em28xx_v4l2 struct, as those info are used only by em28xx v4l2 submodule. Signed-off-by:
-
Frank Schaefer authored
Move camera sensor resolution and xtal out of em28xx common struct, as thore are used only by the em28xx v4l2 submodule. Signed-off-by:
-
Frank Schaefer authored
The video progressive data fields belong to analog TV. Move them out of the common em28xx struct. Signed-off-by:
-
Frank Schaefer authored
The analog format struct belongs to analog TV. Move it out of the common em28xx struct. Signed-off-by:
-
Frank Schaefer authored
TV norm is specific to analog TV reception. move it out of the common em28xx struct. Signed-off-by:
-
Frank Schaefer authored
The video input mode and control data also belong only to the analog side. move them to struct em28xx_v4l. Signed-off-by:
-
Frank Schaefer authored
The em28xx scaler data are used only for analog video. Move them to struct em28xx_v4l2. Signed-off-by:
-
Frank Schaefer authored
The video and VBI-specific VB2 queue and mutexes are used only by the v4l2 sub-driver. Move them to the V4L2 struct, preventing wasting memory if this sub-driver is not used. Signed-off-by:
-
Frank Schaefer authored
There are 3 struct video_device at the em28xx common struct, for video, VBI and radio. They all are used only by the V4L2 driver. So, move them to the v4l2-specific struct. Signed-off-by:
-
Frank Schaefer authored
The current clock definition applies only to the V4L2 side of the driver. Move its struct pointer to the v4l2_dev, where it belongs. Signed-off-by:
-
Frank Schaefer authored
Controls are only applicable to V4L2 module. Move the corresponding data structs to the proper place. Signed-off-by:
-
Frank Schaefer authored
That reduces a little bit the memory footprint when em28xx-video is not loaded. Signed-off-by:
-
Frank Schaefer authored
[media] em28xx-video: simplify usage of the pointer to struct v4l2_ctrl_handler in em28xx_v4l2_init() The local var hdl is already pointing to &dev->ctrl_handler. Use it, instead of dereferencing it all the time. Code cleanup. No functional changes. Signed-off-by:
-
Frank Schaefer authored
Just a cleanup. No functional changes. Signed-off-by:
-
Frank Schaefer authored
It is no longer needed since nobody is calling i2c_get_adapdata() anymore. Signed-off-by:
-
Mikhail Domrachev authored
Signed-off-by:
Mikhail Domrachev <mihail.domrychev@comexp.ru> Signed-off-by:
-
Hans Verkuil authored
The message logged by v4l_print_cropcap should be a single line withouti linebreaks, just like all the other v4l_print_<ioctl> functions. Signed-off-by:
-
Vitaly Osipov authored
tcm825x.c: changed printk to pr_info Signed-off-by:
Vitaly Osipov <vitaly.osipov@gmail.com> Signed-off-by:
-
Vitaly Osipov authored
tcm825x.c: fixing ERROR: Macros with complex values should be enclosed in parenthesis Signed-off-by:
-
Ma Haijun authored
The second argument should be physical address rather than virtual address. Signed-off-by:
Ma Haijun <mahaijuns@gmail.com> Signed-off-by:
-
Takashi Iwai authored
When ivtv PCM device is accessed at the state where no firmware is loaded, it oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffffa049a881>] try_mailbox.isra.0+0x11/0x50 [ivtv] Call Trace: [<ffffffffa049aa20>] ivtv_api_call+0x160/0x6b0 [ivtv] [<ffffffffa049af86>] ivtv_api+0x16/0x40 [ivtv] [<ffffffffa049b10c>] ivtv_vapi+0xac/0xc0 [ivtv] [<ffffffffa049d40d>] ivtv_start_v4l2_encode_stream+0x19d/0x630 [ivtv] [<ffffffffa0530653>] snd_ivtv_pcm_capture_open+0x173/0x1c0 [ivtv_alsa] [<ffffffffa04526f1>] snd_pcm_open_substream+0x51/0x100 [snd_pcm] [<ffffffffa0452853>] snd_pcm_open+0xb3/0x260 [snd_pcm] [<ffffffffa0452a37>] snd_pcm_capture_open+0x37/0x50 [snd_pcm] [<ffffffffa033f557>] snd_open+0xa7/0x1e0 [snd] [<ffffffff8118a628>] chrdev_open+0x88/0x1d0 [<ffffffff811840be>] do_dentry_open+0x1de/0x270 [<ffffffff81193a73>] do_last+0x1c3/0xec0 [<ffffffff81194826>] path_openat+0xb6/0x670 [<ffffffff81195b65>] do_filp_open+0x35/0x80 [<ffffffff81185449>] do_sys_open+0x129/0x210 [<ffffffff815b782d>] system_call_fastpath+0x1a/0x1f This patch adds the check of firmware at PCM open callback like other open callbacks of this driver. Bugzilla: https://apibugzilla.novell.com/show_bug.cgi?id=875440 Cc: <stable@vger.kernel.org> Signed-off-by:Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alexander Shiyan authored
This will help to debug driver, allows us to see the full name of the device through /proc/interrupts. CPU0 ... 69: 0 mxc-avic 53 10023000.coda ... Signed-off-by:Alexander Shiyan <shc_work@mail.ru> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Daeseok Youn authored
smatch says: drivers/media/usb/s2255/s2255drv.c:2246 s2255_probe() warn: possible memory leak of 'dev' Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions.The label err_register is removed as it is no longer required. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by:Himangi Saraogi <himangi774@gmail.com> Signed-off-by:
-
Masanari Iida authored
Fix format string mismatch in bw-qcam.c Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Ricardo Ribalda authored
vb2_get_vma() copy the content of the vma to a new structure but set some of its pointers to NULL. One of this pointer is used by follow_pte() called by follow_pfn() on io memory. This can lead to a NULL pointer derreference. The version of vma that has not been cleared must be used. [ 406.143320] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 406.143427] IP: [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.143491] PGD 6c3f0067 PUD 6c3ef067 PMD 0 [ 406.143546] Oops: 0000 [#1] SMP [ 406.143587] Modules linked in: qtec_mem qt5023_video qtec_testgen qtec_xform videobuf2_core gpio_xilinx videobuf2_vmalloc videobuf2_dma_sg qtec_cmosis videobuf2_memops qtec_pcie qtec_white fglrx(PO) qt5023 spi_xilinx spi_bitbang [ 406.143852] CPU: 0 PID: 299 Comm: tracker Tainted: P O 3.13.0-qtec-standard #10 [ 406.143927] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 04/04/2013 [ 406.144000] task: ffff880085c82d60 ti: ffff880085abe000 task.ti: ffff880085abe000 [ 406.144067] RIP: 0010:[<ffffffff8115204c>] [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.144145] RSP: 0018:ffff880085abf888 EFLAGS: 00010296 [ 406.144195] RAX: 0000000000000000 RBX: ffff880085abf8e0 RCX: ffff880085abf888 [ 406.144260] RDX: ffff880085abf890 RSI: 00007fc52e173000 RDI: ffff8800863cbe40 [ 406.144325] RBP: ffff880085abf8a8 R08: 0000000000000018 R09: ffff8800863cbf00 [ 406.144388] R10: ffff880086703b80 R11: 00000000000001e0 R12: 0000000000018000 [ 406.144452] R13: 0000000000000000 R14: ffffea0000000000 R15: ffff88015922fea0 [ 406.144517] FS: 00007fc536e7c740(0000) GS:ffff88015ec00000(0000) knlGS:0000000000000000 [ 406.144591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.144644] CR2: 0000000000000040 CR3: 0000000066c9d000 CR4: 00000000000007f0 [ 406.144708] Stack: [ 406.144731] 0000000000018000 00007fc52e18b000 0000000000000000 00007fc52e173000 [ 406.144813] ffff880085abf918 ffffffffa083b2fd ffff880085ab1ba8 0000000000000000 [ 406.144894] 0000000000000000 0000000100000000 ffff880085abf928 ffff880159a20800 [ 406.144976] Call Trace: [ 406.145011] [<ffffffffa083b2fd>] vb2_dma_sg_get_userptr+0x14d/0x310 [videobuf2_dma_sg] [ 406.145089] [<ffffffffa08507df>] __qbuf_userptr+0xbf/0x3e0 [videobuf2_core] [ 406.147229] [<ffffffffa0041454>] ? mc_heap_lock_memory+0x1f4/0x490 [fglrx] [ 406.149234] [<ffffffff813428f3>] ? cpumask_next_and+0x23/0x50 [ 406.151223] [<ffffffff810b2e38>] ? enqueue_task_fair+0x658/0xde0 [ 406.153199] [<ffffffff81061888>] ? native_smp_send_reschedule+0x48/0x60 [ 406.155184] [<ffffffff815836b9>] ? get_ctrl+0xa9/0xd0 [ 406.157161] [<ffffffff8116f4e4>] ? __kmalloc+0x1a4/0x1b0 [ 406.159135] [<ffffffffa0850b9c>] ? __vb2_queue_alloc+0x9c/0x4a0 [videobuf2_core] [ 406.161130] [<ffffffffa0852d08>] __buf_prepare+0x1a8/0x210 [videobuf2_core] [ 406.163171] [<ffffffffa0854c57>] __vb2_qbuf+0x27/0xcc [videobuf2_core] [ 406.165229] [<ffffffffa0851dfd>] vb2_queue_or_prepare_buf+0x1ed/0x270 [videobuf2_core] [ 406.167325] [<ffffffffa0854c30>] ? vb2_ioctl_querybuf+0x30/0x30 [videobuf2_core] [ 406.169419] [<ffffffffa0851e9c>] vb2_qbuf+0x1c/0x20 [videobuf2_core] [ 406.171508] [<ffffffffa0851ef8>] vb2_ioctl_qbuf+0x58/0x70 [videobuf2_core] [ 406.173604] [<ffffffff8157d3a8>] v4l_qbuf+0x48/0x60 [ 406.175681] [<ffffffff8157b29c>] __video_do_ioctl+0x2bc/0x340 [ 406.177779] [<ffffffff8116f43c>] ? __kmalloc+0xfc/0x1b0 [ 406.179883] [<ffffffff8157cd0e>] ? video_usercopy+0x7e/0x470 [ 406.181961] [<ffffffff8157ce81>] video_usercopy+0x1f1/0x470 [ 406.184021] [<ffffffff8157afe0>] ? v4l_printk_ioctl+0xb0/0xb0 [ 406.186085] [<ffffffff810ae1ed>] ? account_system_time+0x8d/0x190 [ 406.188149] [<ffffffff8157d115>] video_ioctl2+0x15/0x20 [ 406.190216] [<ffffffff815781b3>] v4l2_ioctl+0x123/0x160 [ 406.192251] [<ffffffff810ce415>] ? rcu_eqs_enter+0x65/0xa0 [ 406.194256] [<ffffffff81186b28>] do_vfs_ioctl+0x88/0x560 [ 406.196258] [<ffffffff810ae145>] ? account_user_time+0x95/0xb0 [ 406.198262] [<ffffffff810ae6a4>] ? vtime_account_user+0x44/0x70 [ 406.200215] [<ffffffff81187091>] SyS_ioctl+0x91/0xb0 [ 406.202107] [<ffffffff817be109>] tracesys+0xd0/0xd5 [ 406.203946] Code: 66 66 66 90 48 f7 47 50 00 44 00 00 b8 ea ff ff ff 74 52 55 48 89 e5 53 48 89 d3 48 8d 4d e0 48 8d 55 e8 48 83 ec 18 48 8b 47 40 <48> 8b 78 40 e8 8b fe ff ff 85 c0 75 27 48 8b 55 e8 48 b9 00 f0 [ 406.208011] RIP [<ffffffff8115204c>] follow_pfn+0x2c/0x70 [ 406.209908] RSP <ffff880085abf888> [ 406.211760] CR2: 0000000000000040 [ 406.213676] ---[ end trace 996d9f64e6739a04 ]--- Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Pali Rohár authored
This patch fixes an off by one check in bcm2048_set_region(). Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Kirill Tkhai authored
Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, we have a race between del_timer() and kfree(), and it's possible to use already freed memory in the handler. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
-
Jinqiang Zeng authored
Signed-off-by:
-
Dan Carpenter authored
The else statement here is not aligned with the correct if statement. I think the code works as intended and it's just the indenting which is wrong. Also kernel style says we should use curly braces here so I have added those. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
devm_ioremap_resource() returns a pointer to the remapped memory or an ERR_PTR() encoded error code on failure. Fix the checks inside csc_create() and sc_create() accordingly. Cc: Archit Taneja <archit@ti.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Archit Taneja<archit@ti.com> Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
Frank Schaefer authored
em28xx_compression_disable() is a single line function which is called only one time and this call also isn't needed. Register 0x26 is always configured as part of the scaler configuration, which in turn is always done when the resolution changes. And the initial resolution setting is applied at first device open. Signed-off-by:
-
