- 14 Jul, 2020 40 commits
-
-
Jiri Olsa authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 9b38cc70 ] Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5 ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by:
"Ziqian SUN (Zamir)" <zsun@redhat.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b191fa96 ] Avoid kretprobe recursion loop bg by setting a dummy kprobes to current_kprobe per-CPU variable. This bug has been introduced with the asm-coded trampoline code, since previously it used another kprobe for hooking the function return placeholder (which only has a nop) and trampoline handler was called from that kprobe. This revives the old lost kprobe again. With this fix, we don't see deadlock anymore. And you can see that all inner-called kretprobe are skipped. event_1 235 0 event_2 19375 19612 The 1st column is recorded count and the 2nd is missed count. Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed) (some difference are here because the counter is racy) Reported-by:
Andrea Righi <righi.andrea@gmail.com> Tested-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Naveen N. Rao authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 30176466 ] Fix two issues with kprobes.h on BE which were exposed with the optprobes work: - one, having to do with a missing include for linux/module.h for MODULE_NAME_LEN -- this didn't show up previously since the only users of kprobe_lookup_name were in kprobes.c, which included linux/module.h through other headers, and - two, with a missing const qualifier for a local variable which ends up referring a string literal. Again, this is unique to how kprobe_lookup_name is being invoked in optprobes.c Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 1a0aa991 ] In kprobe_optimizer() kick_kprobe_optimizer() is called without kprobe_mutex, but this can race with other caller which is protected by kprobe_mutex. To fix that, expand kprobe_mutex protected area to protect kick_kprobe_optimizer() call. Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2 Fixes: cd7ebe22 ("kprobes: Use text_poke_smp_batch for optimizing") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ziqian SUN <zsun@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 77251e41 upstream. When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b7637754 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159Reported-by:
Mike Gerow <gerow@google.com> Fixes: 39871037 ("crypto: algapi - Move larval completion into algboss") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reported-by:
Kai Lüke <kai@kinvolk.io> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ahmed S. Darwish authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 15b81ce5 ] For optimized block readers not holding a mutex, the "number of sectors" 64-bit value is protected from tearing on 32-bit architectures by a sequence counter. Disable preemption before entering that sequence counter's write side critical section. Otherwise, the read side can preempt the write side section and spin for the entire scheduler tick. If the reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock. Fixes: c83f6bf9 ("block: add partition resize function to blkpg ioctl") Cc: <stable@vger.kernel.org> Signed-off-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 142cd252 ] We do need access_process_vm() to access the target's reg_window. However, access to caller's memory (storing the result in genregs32_get(), fetching the new values in case of genregs32_set()) should be done by normal uaccess primitives. Fixes: ad4f9576 ([SPARC64]: Fix user accesses in regset code.) Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 873a95e0 ] Currently we only poll for an ACT up to 30 times, with a busy-wait delay of 100µs between each attempt - giving us a timeout of 2900µs. While this might seem sensible, it would appear that in certain scenarios it can take dramatically longer then that for us to receive an ACT. On one of the EVGA MST hubs that I have available, I observed said hub sometimes taking longer then a second before signalling the ACT. These delays mostly seem to occur when previous sideband messages we've sent are NAKd by the hub, however it wouldn't be particularly surprising if it's possible to reproduce times like this simply by introducing branch devices with large LCTs since payload allocations have to take effect on every downstream device up to the payload's target. So, instead of just retrying 30 times we poll for the ACT for up to 3ms, and additionally use usleep_range() to avoid a very long and rude busy-wait. Note that the previous retry count of 30 appears to have been arbitrarily chosen, as I can't find any mention of a recommended timeout or retry count for ACTs in the DisplayPort 2.0 specification. This also goes for the range we were previously using for udelay(), although I suspect that was just copied from the recommended delay for link training on SST devices. Changes since v1: * Use readx_poll_timeout() instead of open-coding timeout loop - Sean Paul Changes since v2: * Increase poll interval to 200us - Sean Paul * Print status in hex when we timeout waiting for ACT - Sean Paul Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul <sean@poorly.run> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.comSigned-off-by:
-
Jeffle Xu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit cfb3c85a ] Fix the bug when calculating the physical block number of the first block in the split extent. This bug will cause xfstests shared/298 failure on ext4 with bigalloc enabled occasionally. Ext4 error messages indicate that previously freed blocks are being freed again, and the following fsck will fail due to the inconsistency of block bitmap and bg descriptor. The following is an example case: 1. First, Initialize a ext4 filesystem with cluster size '16K', block size '4K', in which case, one cluster contains four blocks. 2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent tree of this file is like: ... 36864:[0]4:220160 36868:[0]14332:145408 51200:[0]2:231424 ... 3. Then execute PUNCH_HOLE fallocate on this file. The hole range is like: .. ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1 ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1 ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1 ... 4. Then the extent tree of this file after punching is like ... 49507:[0]37:158047 49547:[0]58:158087 ... 5. Detailed procedure of punching hole [49544, 49546] 5.1. The block address space: ``` lblk ~49505 49506 49507~49543 49544~49546 49547~ ---------+------+-------------+----------------+-------- extent | hole | extent | hole | extent ---------+------+-------------+----------------+-------- pblk ~158045 158046 158047~158083 158084~158086 158087~ ``` 5.2. The detailed layout of cluster 39521: ``` cluster 39521 <-------------------------------> hole extent <----------------------><-------- lblk 49544 49545 49546 49547 +-------+-------+-------+-------+ | | | | | +-------+-------+-------+-------+ pblk 158084 1580845 158086 158087 ``` 5.3. The ftrace output when punching hole [49544, 49546]: - ext4_ext_remove_space (start 49544, end 49546) - ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2]) - ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2] - ext4_free_blocks: (block 158084 count 4) - ext4_mballoc_free (extent 1/6753/1) 5.4. Ext4 error message in dmesg: EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt. EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters In this case, the whole cluster 39521 is freed mistakenly when freeing pblock 158084~158086 (i.e., the first three blocks of this cluster), although pblock 158087 (the last remaining block of this cluster) has not been freed yet. The root cause of this isuue is that, the pclu of the partial cluster is calculated mistakenly in ext4_ext_remove_space(). The correct partial_cluster.pclu (i.e., the cluster number of the first block in the next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather than 39522. Fixes: f4226d9e ("ext4: fix partial cluster initialization") Signed-off-by:
Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by:
Eric Whitney <enwlinux@gmail.com> Cc: stable@kernel.org # v3.19+ Link: https://lore.kernel.org/r/1590121124-37096-1-git-send-email-jefflexu@linux.alibaba.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 65de5096 upstream. Clang's static analysis tool reports these double free memory errors. security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc] kfree(bnames[i]); ^~~~~~~~~~~~~~~~ security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc] kfree(bvalues); ^~~~~~~~~~~~~~ So improve the security_get_bools error handling by freeing these variables and setting their return pointers to NULL and the return len to 0 Cc: stable@vger.kernel.org Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit 80e5f89d upstream. The command ring and cursor ring use different notify port addresses definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring and cursor ring. This doesn't cause any problems now, because QEMU's behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same. However, QEMU's behavior may be change in future, so let's fix it. P.S.: In the X.org QXL driver, the notify port address of cursor ring is correct. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: <stable@vger.kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-email-chenhc@lemote.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1885932 commit a5cb5fa6 upstream. Just add a bit more line wrapping, get rid of some extraneous whitespace, remove an unneeded goto label, and move around some variable declarations. No functional changes here. Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit f78d4032 ] module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facc ("drm/kms: slave encoder interface.") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit b5292111 ] Commit 130f4caf ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf ("libata: Ensure ata_port probe has completed before detach") Suggested-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 2d3a8e2d ] In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887e ("implement in-kernel gendisk events handling") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit be23e837 ] coccicheck reports: drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417 In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return. btree_gc_coalesce func details as follows: if alloc new_nodes[i] fails: goto out_nocoalesce; // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock) // main coalescing process for (i = nodes - 1; i > 0; --i) [snipped] if coalescing process fails: // Here, directly goto out_nocoalesce // tag will cause a deadlock goto out_nocoalesce; [snipped] // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock) // coalesing succ, return return; out_nocoalesce: btree_node_free(new_nodes[i]) // free new_nodes[i] // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock); // set flag for reuse clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags); // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock); To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag. (Coly Li helps to clean up commit log format.) Fixes: 2a285686 ("bcache: btree locking rework") Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Gaurav Singh authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 11b6e548 ] The 'evname' variable can be NULL, as it is checked a few lines back, check it before using. Fixes: 9e207ddf ("perf report: Show call graph from reference events") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/Signed-off-by:
Gaurav Singh <gaurav1086@gmail.com> Signed-off-by:
-
Qais Yousef authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 16bdc04c ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-3-qais.yousef@arm.comSigned-off-by:
-
Qais Yousef authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 79112cc3 ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/Signed-off-by:
-
Christophe JAILLET authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 42c76c98 ] 'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail. Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo.fr Fixes: e95a1b65 ("[ARM] rpc: acornscsi: update to new style ecard driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
tannerlove authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 8027bc03 ] If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by:
Tanner Love <tannerlove@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 51da9dfb ] ELFNOTE_START allows callers to specify flags for .pushsection assembler directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is specified twice after preprocessing, once with "a" flag, once without. Example: .pushsection .note.Linux, "a", @note ; .pushsection .note.Linux, "", @note ; While GNU as allows this ordering, it warns for the opposite ordering, making these directives position dependent. We'd prefer not to precisely match this behavior in Clang's integrated assembler. Instead, the non __ASSEMBLY__ definition of ELF_NOTE uses __attribute__((section(".note.Linux"))) which is created with SHF_ALLOC, so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C and just always use "a" flag. This allows Clang to assemble a working mainline (5.6) kernel via: $ make CC=clang AS=clang Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Fangrui Song <maskray@google.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/913 Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.comDebugged-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit bd93f003 ] Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets: include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow] return sizeof(w) == 4 ? hweight32(w) : hweight64(w); ^~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64' define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64' define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) ^ ~~ include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32' define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) ^ include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16' define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 )) ^ include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8' (!!((w) & (1ULL << 2))) + \ Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.deSigned-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit acaab733 ] The zlib inflate code has an old micro-optimization based on the assumption that for pre-increment memory accesses, the compiler will generate code that fits better into the processor's pipeline than what would be generated for post-increment memory accesses. This optimization was already removed in upstream zlib in 2016: https://github.com/madler/zlib/commit/9aaec95e8211 This optimization causes UB according to C99, which says in section 6.5.6 "Additive operators": "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined". This UB is not only a theoretical concern, but can also cause trouble for future work on compiler-based sanitizers. According to the zlib commit, this optimization also is not optimal anymore with modern compilers. Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the POSTINC case, and remove the macro definitions, just like in the upstream patch. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Qiushi Wu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 0267ffce ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.eduReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
-
Bob Peterson authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit ea22eee4 ] Before this patch, a simple typo accidentally added \n to the jid= string for lock_nolock mounts. This made it impossible to mount a gfs2 file system with a journal other than journal0. Thus: mount -tgfs2 -o hostdata="jid=1" <device> <mount pt> Resulted in: mount: wrong fs type, bad option, bad superblock on <device> In most cases this is not a problem. However, for debugging and testing purposes we sometimes want to test the integrity of other journals. This patch removes the unnecessary \n and thus allows lock_nolock users to specify an alternate journal. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Stafford Horne authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 6bd140e1 ] Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around. This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove. Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Xiyu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 36124fb1 ] fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt. The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak. Fix this issue by calling dma_release_channel() when config DMA channel failed. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Fedor Tokarev authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 118917d6 ] Fix off-by-one issues in 'rpc_ntop6': - 'snprintf' returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, a return value of 'sizeof(scopebuf)' means that the last character was dropped. - 'strcat' adds a terminating null byte to the string, thus if len == buflen, the null byte is written past the end of the buffer. Signed-off-by:
Fedor Tokarev <ftokarev@gmail.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Qiushi Wu authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 44734a59 ] m66592_free_request() is called under label "err_add_udc" and "clean_up", and m66592->ep0_req is not set to NULL after first free, leading to a double-free. Fix this issue by setting m66592->ep0_req to NULL after the first free. Fixes: 0f91349b ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit eafa8004 ] Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point. Addresses-Coverity: ("Dereference before null check") Fixes: 24a28e42 ("USB: gadget driver for LPC32xx") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 7a0fbcf7 ] Clang warns: drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of address of 'ep->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (&ep->queue == NULL) ~~~~^~~~~ ~~~~ 1 warning generated. It is not wrong, queue is not a pointer so if ep is not NULL, the address of queue cannot be NULL. No other driver does a check like this and this check has been around since the driver was first introduced, presumably with no issues so it does not seem like this check should be something else. Just remove it. Commit afe956c5 ("kbuild: Enable -Wtautological-compare") exposed this but it is not the root cause of the warning. Fixes: 3fc154b6 ("USB Gadget driver for Samsung s3c2410 ARM SoC") Link: https://github.com/ClangBuiltLinux/linux/issues/1004Reviewed-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Fabrice Gasnier authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 8c935dea ] When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN Call the gadget resume routine after the core is in L0 state. Fixes: f81f46e1 ("usb: dwc2: implement hibernation during bus suspend/resume") Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Stefan Riedmueller authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit a0948ddb ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.deSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 25bdae0f ] Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready. This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e432 ("of: platform: Batch fwnode parsing when adding all top level devices") Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Gregory CLEMENT authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 4dd31f1f ] When submitting the previous fix "tty: n_gsm: Fix waking up upper tty layer when room available". It was suggested to switch from a while to a for loop, but when doing it, there was a remaining bogus i++. This patch removes this i++ and also reorganizes the code making it more compact. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.comSigned-off-by:
-
Tang Bin authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit d4929202 ] The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Fixes: 7e8d5cd9 ("USB: Add EHCI support for MX27 and MX31 based boards") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Qais Yousef authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 1cb3b009 ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/Acked-by:
-
Alex Williamson authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit bc138db1 ] The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map. Seen on an NVIDIA Tesla T4. Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Geoff Levand authored
BugLink: https://bugs.launchpad.net/bugs/1885932 [ Upstream commit 12655446 ] The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang. Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic. With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
