- 04 Feb, 2021 7 commits
-
-
Kumar Kartikeya Dwivedi authored
strlcpy is marked as deprecated in Documentation/process/deprecated.rst, and there is no functional difference when the caller expects truncation (when not checking the return value). strscpy is relatively better as it also avoids scanning the whole source string. This silences the related checkpatch warnings from: 5dbdb2d8 ("checkpatch: prefer strscpy to strlcpy") Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20210131172838.146706-3-memxor@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kumar Kartikeya Dwivedi authored
strlcpy is marked as deprecated in Documentation/process/deprecated.rst, and there is no functional difference when the caller expects truncation (when not checking the return value). strscpy is relatively better as it also avoids scanning the whole source string. This silences the related checkpatch warnings from: 5dbdb2d8 ("checkpatch: prefer strscpy to strlcpy") Signed-off-by:
-
Martin Kaiser authored
The Edimax EW-7811UN V2 uses an RTL8188EU chipset and works with this driver. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210204085217.9743-1-martin@kaiser.cxSigned-off-by:
-
Martin Kaiser authored
A netdev xmit function should return NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by:
-
Colin Ian King authored
Currently the pointer 'reporter' is not being initialized and is being read in a netdev_warn message. The pointer is not used and is redundant, fix this by removing it and replacing the reference to it with priv->reporter instead. Fixes: 1053c278 ("staging: qlge: coredump via devlink health reporter") Reviewed-by:
Coiby Xu <coiby.xu@gmail.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Uninitialized pointer read") Link: https://lore.kernel.org/r/20210203133834.22388-1-colin.king@canonical.comSigned-off-by:
-
Christian Gromm authored
This patch replaces the safe list iteration function with the non-safe one, as no list element is being deleted. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/1612265890-18246-3-git-send-email-christian.gromm@microchip.comSigned-off-by:
-
Christian Gromm authored
This patch checks the function parameter 'bytes' before doing the subtraction to prevent memory corruption. Signed-off-by:
-
- 31 Jan, 2021 15 commits
-
-
Anirudh Rayabharam authored
Make switch and case to be at the same indent. This fixes the checkpatch error "switch and case should be at the same indent". Signed-off-by:
Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210131131226.16917-1-mail@anirudhrb.comSigned-off-by:
-
Mauro Carvalho Chehab authored
At PMIC subsystem, C89 comments are preferred over C99. While here, also update the copyrights of the header file. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5a86478c8ccb93d3105485b5f16e20e9c12e2196.1611949675.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
Make it clearer about how the IRQ registers are filled by adding a table with them, with two macros used to calculate the mask register. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use BIT() and GENMASK(); - Remove duplicated mask definitions; - Simplify the code under IRQ handler; - Add a few extra blank lines to make easier to see spin_lock/spin_unlock; - Remove debug code; - Fix a few minor coding style issues. Signed-off-by:
-
Mauro Carvalho Chehab authored
The conversion to regmap introduced a regression at the code which reads from the IRQ register. Address that. Fixes: fb02e3eb ("staging: hikey9xx: spmi driver: convert to regmap") Signed-off-by:
-
Mauro Carvalho Chehab authored
Remove the IRQ list from the header, as this is used only inside the driver itself. Also, get rid of two unused defines. The net result is that only struct hi6421_spmi_pmic remains on it, as this is used by the regulator driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
Cleanup the error handling code, making the messages more consistent and removing an uneeded call to free_irq(). While here, also remove debug messages and make the error messages more consistent. Signed-off-by:
-
Mauro Carvalho Chehab authored
- When referring to regmap, rename map to regmap - inside hi6421-spmi-pmic, call private data struct as ddata. No functional changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Now that the driver was ported to use regmap, let's use some help functions in order to simplify the code a little bit. Suggested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of doing its own SPMI I/O implementation, use the already-existing regmap one. Signed-off-by:
-
Ilya Lipnitskiy authored
Also use KBUILD_MODNAME for module name. This driver is only used by RALINK MIPS MT7621 SoCs. Tested by building against that target using OpenWrt with Linux 5.10.10. Fixes the following error: error: the following would cause module name conflict: drivers/dma/mediatek/mtk-hsdma.ko drivers/staging/mt7621-dma/mtk-hsdma.ko Cc: stable@vger.kernel.org Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Link: https://lore.kernel.org/r/20210130034507.2115280-1-ilya.lipnitskiy@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
strlcpy is marked as deprecated in Documentation/process/deprecated.rst, and there is no functional difference when the caller expects truncation (when not checking the return value). strscpy is relatively better as it also avoids scanning the whole source string. This silences the related checkpatch warnings from: 5dbdb2d8 ("checkpatch: prefer strscpy to strlcpy") Signed-off-by:
-
Ivan Safonov authored
Driver and kernel definitions are equal. Avoid code duplication, improve readability. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20210131080618.25184-1-insafonov@gmail.comSigned-off-by:
-
Ivan Safonov authored
Improve readability. Signed-off-by:
-
Anirudh Rayabharam authored
Fix a couple of pointer declarations where the pointer qualifier '*' is not attached to the variable name. This fixes the checkpatch error: "foo * bar" should be "foo *bar". Signed-off-by:
-
- 29 Jan, 2021 10 commits
-
-
Coiby Xu authored
Instructions and examples on kernel data structures dumping and coredump. Signed-off-by:
-
Coiby Xu authored
The debugging code in the following ifdef land - QL_ALL_DUMP - QL_REG_DUMP - QL_DEV_DUMP - QL_CB_DUMP - QL_IB_DUMP - QL_OB_DUMP becomes unnecessary because, - Device status and general registers can be obtained by ethtool. - Coredump can be done via devlink health reporter. - Structure related to the hardware (struct ql_adapter) can be obtained by crash or drgn. Link: https://lkml.org/lkml/2020/6/30/19Suggested-by:
Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by:
-
Coiby Xu authored
devlink health could be used to get coredump. No need to send so much data to the kernel ring buffer. Signed-off-by:
-
Coiby Xu authored
With force_coredump module parameter set, devlink health dump will reset the MPI RISC first which takes 5 secs to be finished. Note that only NIC function that owns the firmware can do the force_dumping. Otherwise devlink will receive an EPERM error. Signed-off-by:
-
Coiby Xu authored
$ devlink health dump show DEVICE reporter coredump -p -j { "Core Registers": { "segment": 1, "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] }, "Test Logic Regs": { "segment": 2, "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] }, "RMII Registers": { "segment": 3, "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] }, ... "Sem Registers": { "segment": 50, "values": [ 0,0,0,0 ] } } Signed-off-by: -
Coiby Xu authored
Stop calling ql_release_all in qlge_init_device and free things one step at a time. struct qlge_adapter *qdev is now a private structure of struct devlink and memset is not necessary. Link: https://lore.kernel.org/patchwork/patch/1321092/#1516928Suggested-by:
-
Coiby Xu authored
Initialize devlink health dump framework for the qlge driver so the coredump could be done via devlink. struct qlge_adapter is now used as the private data structure of struct devlink so it could exist independently of struct net_device and devlink reload could be supported in the future. The private data of PCIe driver now points to qlge_adapter. Since devlink_alloc will zero out struct qlge_adapter, memset in qlge_init_device is not necessary. Signed-off-by:
-
Coiby Xu authored
To avoid namespace clashes with other qlogic drivers and also for the sake of naming consistency, use the "qlge_" prefix as suggested in drivers/staging/qlge/TODO, - For existing ql_ prefix, sed -i "s/ql_/qlge_/g" *.{c,h} - for structs not having a prefix 1. get a list of structs grep "struct.*{" qlge. 2. add qlge_ for each struct, e.g., sed -i "s/ib_ae_iocb_rsp/qlge_ib_ae_iocb_rsp/g" *.{c,h} Link: https://lore.kernel.org/patchwork/patch/1318503/#1516131Suggested-by: -
Dylan Van Assche authored
Playing audio with PulseAudio and the bcm2835-pcm driver results in distorted sound. Timer-based scheduling does not properly work with bcm2835-pcm since configuring PulseAudio with tsched=0 avoids this problem. Setting the SNDRV_PCM_INFO_BATCH flag prevents PulseAudio to use timer-based scheduling by default. Settings this flag makes audio works out of the box. Based on: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7f2430cda819a9ecb1df5a0f3ef4f1c20db3f811Signed-off-by:
Dylan Van Assche <me@dylanvanassche.be> Link: https://lore.kernel.org/r/20210127174348.10192-1-me@dylanvanassche.beSigned-off-by:
-
Colin Ian King authored
The variable result is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by:
-
- 26 Jan, 2021 8 commits
-
-
Mauro Carvalho Chehab authored
There are several uneeded includes. Remove them. Signed-off-by:
-
Mauro Carvalho Chehab authored
Remove the GPL boilerplate, as SPDX tag already points to the license terms and add a new copyright for Huawei. Signed-off-by:
-
Mauro Carvalho Chehab authored
There's no additionalProperties field at the yaml file, causing a warning when checking it. Signed-off-by:
-
Mauro Carvalho Chehab authored
During the driver refactor, a regression broke the logic inside hi6421_spmi_regulator_get_optimum_mode(). Basically, if a LDO has eco_uA == 0, it doesn't support economic mode. So, it should return REGULATOR_MODE_NORMAL. If economic mode is supported, it can return either REGULATOR_MODE_IDLE or REGULATOR_MODE_NORMAL, depending on the load current. Signed-off-by:
-
Mauro Carvalho Chehab authored
Remove obvious comments and fix the comment for the HI6421V600_LDO() macro. While on it, use kernel-doc notation for HI6421V600_LDO(), as kernel-doc can check if the arguments match its description. Signed-off-by:
-
Mauro Carvalho Chehab authored
The original driver, which can be seen at commit 42f24d9d ("staging: regulator: add a regulator driver for HiSilicon 6421v600 SPMI PMIC") had a complex logic to ensure that there won't be multiple power enable/disable commands running at the same time. At the original logic, it were ensured that: - a next power up/down would wait for at least the on/off period; - an extra delay would be granted. It turns that such extra delay has a value of zero, but it was relying on gettimeofday() call, which can take some time. This was later simplified, but there are still some possible issues. In order to avoid that, let's simply add a delay to wait for the power up line to stabilize after powering up a device. Signed-off-by:
-
Mauro Carvalho Chehab authored
Remove the GPL boilerplate, as SPDX tag already points to the license terms and add a new copyright for Huawei. Signed-off-by:
-
Mauro Carvalho Chehab authored
In preparation for de-staging, do some cleanups: - Return error codes from hi6421_spmi_pmic_rmw(); - Remove a debug message; - Change the module description; - a few minor coding style adjustments. Signed-off-by:
-
