- 08 May, 2019 8 commits
-
-
Josh Poimboeuf authored
commit b53f40db upstream. Resuming from a suspend operation is showing a KASAN false positive warning: BUG: KASAN: stack-out-of-bounds in unwind_get_return_address+0x11d/0x130 at addr ffff8803867d7878 Read of size 8 by task pm-suspend/7774 page:ffffea000e19f5c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x2ffff0000000000() page dumped because: kasan: bad access detected CPU: 0 PID: 7774 Comm: pm-suspend Tainted: G B 4.9.0-rc7+ #8 Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016 Call Trace: dump_stack+0x63/0x82 kasan_report_error+0x4b4/0x4e0 ? acpi_hw_read_port+0xd0/0x1ea ? kfree_const+0x22/0x30 ? acpi_hw_validate_io_request+0x1a6/0x1a6 __asan_report_load8_noabort+0x61/0x70 ? unwind_get_return_address+0x11d/0x130 unwind_get_return_address+0x11d/0x130 ? unwind_next_frame+0x97/0xf0 __save_stack_trace+0x92/0x100 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kasan_slab_alloc+0x12/0x20 ? acpi_hw_read+0x2b6/0x3aa ? acpi_hw_validate_register+0x20b/0x20b ? acpi_hw_write_port+0x72/0xc7 ? acpi_hw_write+0x11f/0x15f ? acpi_hw_read_multiple+0x19f/0x19f ? memcpy+0x45/0x50 ? acpi_hw_write_port+0x72/0xc7 ? acpi_hw_write+0x11f/0x15f ? acpi_hw_read_multiple+0x19f/0x19f ? kasan_unpoison_shadow+0x36/0x50 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc_trace+0xbc/0x1e0 ? acpi_get_sleep_type_data+0x9a/0x578 acpi_get_sleep_type_data+0x9a/0x578 acpi_hw_legacy_wake_prep+0x88/0x22c ? acpi_hw_legacy_sleep+0x3c7/0x3c7 ? acpi_write_bit_register+0x28d/0x2d3 ? acpi_read_bit_register+0x19b/0x19b acpi_hw_sleep_dispatch+0xb5/0xba acpi_leave_sleep_state_prep+0x17/0x19 acpi_suspend_enter+0x154/0x1e0 ? trace_suspend_resume+0xe8/0xe8 suspend_devices_and_enter+0xb09/0xdb0 ? printk+0xa8/0xd8 ? arch_suspend_enable_irqs+0x20/0x20 ? try_to_freeze_tasks+0x295/0x600 pm_suspend+0x6c9/0x780 ? finish_wait+0x1f0/0x1f0 ? suspend_devices_and_enter+0xdb0/0xdb0 state_store+0xa2/0x120 ? kobj_attr_show+0x60/0x60 kobj_attr_store+0x36/0x70 sysfs_kf_write+0x131/0x200 kernfs_fop_write+0x295/0x3f0 __vfs_write+0xef/0x760 ? handle_mm_fault+0x1346/0x35e0 ? do_iter_readv_writev+0x660/0x660 ? __pmd_alloc+0x310/0x310 ? do_lock_file_wait+0x1e0/0x1e0 ? apparmor_file_permission+0x18/0x20 ? security_file_permission+0x73/0x1c0 ? rw_verify_area+0xbd/0x2b0 vfs_write+0x149/0x4a0 SyS_write+0xd9/0x1c0 ? SyS_read+0x1c0/0x1c0 entry_SYSCALL_64_fastpath+0x1e/0xad Memory state around the buggy address: ffff8803867d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8803867d7780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8803867d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f4 ^ ffff8803867d7880: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff8803867d7900: 00 00 00 f1 f1 f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00 KASAN instrumentation poisons the stack when entering a function and unpoisons it when exiting the function. However, in the suspend path, some functions never return, so their stack never gets unpoisoned, resulting in stale KASAN shadow data which can cause later false positive warnings like the one above. Reported-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Lunn authored
[ Upstream commit fdfdf867 ] marvell_get_sset_count() returns how many statistics counters there are. If the PHY supports fibre, there are 3, otherwise two. marvell_get_strings() does not make this distinction, and always returns 3 strings. This then often results in writing past the end of the buffer for the strings. Fixes: 2170fef7 ("Marvell phy: add field to get errors from fiber link.") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael Chan authored
[ Upstream commit b4e30e8e ] The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 486efdc8 ] Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1 ("packet: validate address length if non-zero") Suggested-by:
David Laight <David.Laight@aculab.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 95c16925 ] A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6c0afef5 ] syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Shmulik Ladkani authored
[ Upstream commit d2f0c961 ] Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit e5c812e8 upstream. The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory. Reported-by:
Christo Gouws <gouws.christo@gmail.com> Reported-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 04 May, 2019 32 commits
-
-
Greg Kroah-Hartman authored
-
Alex Williamson authored
commit 49285593 upstream. Memory backed DMA mappings are accounted against a user's locked memory limit, including multiple mappings of the same memory. This accounting bounds the number of such mappings that a user can create. However, DMA mappings that are not backed by memory, such as DMA mappings of device MMIO via mmaps, do not make use of page pinning and therefore do not count against the user's locked memory limit. These mappings still consume memory, but the memory is not well associated to the process for the purpose of oom killing a task. To add bounding on this use case, we introduce a limit to the total number of concurrent DMA mappings that a user is allowed to create. This limit is exposed as a tunable module option where the default value of 64K is expected to be well in excess of any reasonable use case (a large virtual machine configuration would typically only make use of tens of concurrent mappings). This fixes CVE-2019-3882. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> [groeck: Adjust for missing upstream commit] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 0aab8e4d ] In case of_match_device cannot find a match, return -EINVAL to avoid NULL pointer dereference. Fixes: fa4191a6 ("leds: pca9532: Add device tree support") Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org>
-
Changbin Du authored
[ Upstream commit 9c38f1f0 ] Backspace is not working on some terminal emulators which do not send the key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127). But currently only '^?' is handled. Let's also handle '^H' for those terminals. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit f7299d44 ] If the call to of_gpiochip_scan_gpios() in of_gpiochip_add() fails, no error handling is performed. This lead to the need of callers to call of_gpiochip_remove() on failure, which causes "BAD of_node_put() on ..." if the failure happened before the call to of_node_get(). Fix this by adding proper error handling. Note that calling gpiochip_remove_pin_ranges() multiple times causes no harm: subsequent calls are a no-op. Fixes: dfbd379b ("gpio: of: Return error if gpio hog configuration failed") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
raymond pang authored
[ Upstream commit dd08a8d9 ] When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for a stack virtual address. Stack DMA buffers must be avoided. Signed-off-by:
raymond pang <raymondpangxd@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Steffen Maier authored
[ Upstream commit c8206579 ] If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit daf5cc27 ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mukesh Ojha authored
[ Upstream commit f276e002 ] if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit fba1bdd2 ] In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
-
Wen Yang authored
[ Upstream commit 75eac7b5 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Wen Yang authored
[ Upstream commit be693df3 ] The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
[ Upstream commit fa3a419d ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 5a698243 ] Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda ("NFS: Allow the mount option retrans=0") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 22c971db ] Colin King reported a bug in read_bbreg_hdl(): memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz); The problem is that "val" is uninitialized. This code is obviously not useful, but so far as I can tell "pcmd->cmdcode" is never GEN_CMD_CODE(_Read_BBREG) so it's not harmful either. For now the easiest fix is to just call r8712_free_cmd_obj() and return. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 9624bafa ] The ks8851 chip's initial carrier state is down. A Link Change Interrupt is signaled once interrupts are enabled if the carrier is up. The ks8851 driver has it backwards by assuming that the initial carrier state is up. The state is therefore misrepresented if the interface is opened with no cable attached. Fix it. The Link Change interrupt is sometimes not signaled unless the P1MBSR register (which contains the Link Status bit) is read on ->ndo_open(). This might be a hardware erratum. Read the register by calling mii_check_link(), which has the desirable side effect of setting the carrier state to down if the cable was detached while the interface was closed. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit d268f315 ] The ks8851 driver currently requests the IRQ before registering the net_device. Because the net_device name is used as IRQ name and is still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs apart if multiple ks8851 chips are present. Most other drivers delay requesting the IRQ until the net_device is opened. Do the same. The driver doesn't enable interrupts on the chip before opening the net_device and disables them when closing it, so there doesn't seem to be a need to request the IRQ already on probe. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 761cfa97 ] Commit 73fdeb82 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails. However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 536d3680 ] The ks8851 driver lets the chip auto-dequeue received packets once they have been read in full. It achieves that by setting the ADRFE flag in the RXQCR register ("Auto-Dequeue RXQ Frame Enable"). However if allocation of a packet's socket buffer or retrieval of the packet over the SPI bus fails, the packet will not have been read in full and is not auto-dequeued. Such partial retrieval of a packet confuses the chip's RX queue management: On the next RX interrupt, the first packet read from the queue will be the one left there previously and this one can be retrieved without issues. But for any newly received packets, the frame header status and byte count registers (RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval. The chip allows explicitly dequeueing a packet from the RX queue by setting the RRXEF flag in the RXQCR register ("Release RX Error Frame"). This could be used to dequeue the packet in case of an error, but if that error is a failed SPI transfer, it is unknown if the packet was transferred in full and was auto-dequeued or if it was only transferred in part and requires an explicit dequeue. The safest approach is thus to always dequeue packets explicitly and forgo auto-dequeueing. Without this change, I've witnessed packet retrieval break completely when an SPI DMA transfer fails, requiring a chip reset. Explicit dequeueing magically fixes this and makes packet retrieval absolutely robust for me. The chip's documentation suggests auto-dequeuing and uses the RRXEF flag only to dequeue error frames which the driver doesn't want to retrieve. But that seems to be a fair-weather approach. Signed-off-by:
-
Marco Felsch authored
[ Upstream commit 032f85c9 ] Increase the reset duration to ensure correct phy functionality. The reset duration is taken from barebox commit 52fdd510de ("ARM: dts: pfla02: use long enough reset for ethernet phy"): Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Cc: Stefan Christ <s.christ@phytec.de> Cc: Christian Hemp <c.hemp@phytec.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Fixes: 3180f956 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit 091dacc3 ] Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit f1d3fba1 ] When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by:
-
Guido Kiener authored
[ Upstream commit 9d6a54c1 ] The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by:
-
Petr Štetiar authored
[ Upstream commit 72ff51d8 ] Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrey Batyiev <batyiev@gmail.com> Reported-by:
Andrey Batyiev <batyiev@gmail.com> Tested-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit ac0cdb3d ] Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit e166e4fd ] Since Commit 21d1196a ("ipv4: set transport header earlier"), skb->transport_header has been always set before entering INET netfilter. This patch is to set skb->transport_header for bridge before entering INET netfilter by bridge-nf-call-iptables. It also fixes an issue that sctp_error() couldn't compute a right csum due to unset skb->transport_header. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Suggested-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 05b7639d ] Otherwise, we hit bogus ENOENT when removing elements. Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by:
Václav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 5bf7295f ] netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit cd479ecc ] For a 64-bit process the randomization of the program break is quite large with 1GB. That is as big as the randomization of the anonymous mapping base, for a test case started with '/lib/ld64.so.1 <exec>' it can happen that the heap is placed after the stack. To avoid this limit the program break randomization to 32MB for 64-bit and keep 8MB for 31-bit. Reported-by:
Stefan Liebler <stli@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Helen Koike authored
[ Upstream commit 544e7841 ] Raspberry pi board model B revison 2 have the hot plug detector gpio active high (and not low as it was in the dts). Signed-off-by:
Helen Koike <helen.koike@collabora.com> Fixes: 49ac67e0 ("ARM: bcm2835: Add VC4 to the device tree.") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Hans Verkuil authored
commit ed356f11 upstream. If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [ Naresh: Fixed rebase conflict ] Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 61c59355 upstream. _dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
