- 26 Jun, 2020 33 commits
-
-
Miquel Raynal authored
The ->choose_interface() hook is here for manufacturer drivers to provide a better timing interface than the default one, this field is not needed anymore. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-28-miquel.raynal@bootlin.com
-
Rickard x Andersson authored
The Kioxia/Toshiba TH58NVG2S3HBAI4 NAND memory is not ONFI compliant. The timings of the NAND chip memory are quite close to ONFI mode 4 but is breaking that spec. By providing our own set of timings, erase block read speed is increased from 6910 kiB/s to 13490 kiB/s and erase block write speed is increased from 3350 kiB/s to 4410 kiB/s. Tested on IMX6SX which has a NAND controller supporting EDO mode. Signed-off-by:
Rickard x Andersson <rickaran@axis.com> Signed-off-by:
-
Miquel Raynal authored
This chip supports ONFI SDR timing mode 4, implement the new hook to advertize it. Signed-off-by:
-
Miquel Raynal authored
This chip supports ONFI SDR timing mode 2, implement the new hook to advertize it. Signed-off-by:
-
Miquel Raynal authored
Implement this hook for the tc58teg5dclta00 NAND chip and stop setting ->default_timing_mode. Signed-off-by:
-
Miquel Raynal authored
This hook can be overloaded by NAND manufacturer drivers to propose alternative timings when not following the main standards. In this case, the manufacturer drivers is responsible for choosing the best interface configuration that fits both the controller and chip capabilities. Signed-off-by:
-
Miquel Raynal authored
Extract the logic out of nand_choose_interface_config() to create a public helper that can be reused by manufacturer drivers. Add the possibility to provide a specific set of timings. Signed-off-by:
-
Miquel Raynal authored
Warn the user if the parameters are wrong but basically it would mean there is a serious issue in the NAND core. So no need to ever check its output, let's make this helper return void. Signed-off-by:
-
Miquel Raynal authored
The name/suffix data_interface is a bit misleading in that the field or functions actually represent a configuration that can be applied by the controller/chip. Let's rename all fields/functions/hooks that are worth renaming. Signed-off-by:
-
Miquel Raynal authored
As a preparation for allocating the data interface structure dynamically (and rename it), let's avoid accessing chip->data_interface directly. Instead, we introduce a helper, nand_get_interface_config(), and use it to retrieve the current data interface configuration out of a nand_chip object. Signed-off-by:
-
Miquel Raynal authored
The ONFI parameter page of a chip might define more fine grained tPROG_max and tBERS_max. When we do not have this information, we default to the highest possible values (they are maxima anyway). There is no point setting these fields at runtime, so explicitly move these defaults to the main ONFI SDR timings structure. This way, we will also be able to return a pointer to mode 0 directly when we will create a default reset configuration. Signed-off-by:
-
Miquel Raynal authored
These two values are already hardcoded in the default ONFI timing structure, no need to redefine them here. Plus, we want to be able to reference timing mode 0 easily and reliably, without extra computation, so we get rid of the extra assignations. Signed-off-by:
-
Miquel Raynal authored
Vendors are allowed to provide their own set of timings. In this case, we provide a way to derive the "closest" timing mode so that, if the NAND controller does not support tweaking these parameters, it will be able to configure itself anyway. Signed-off-by:
-
Miquel Raynal authored
Turn this argument into an unsigned int, as it cannot be signed. This also spares a check. Signed-off-by:
-
Miquel Raynal authored
Right now the core uses onfi_fill_data_interface() to initialize the nand_data_interface object embedded in nand_chip, but we are about to allocate this object dynamically and let manufacturer drivers provide their own interface config. Let's patch the onfi_fill_data_interface() so it can initialize an interface config that's not the one currently attached to the nand_chip. Signed-off-by:
-
Miquel Raynal authored
Describe all parameters and drop the legacy [NAND Interface] prefix. Signed-off-by:
-
Miquel Raynal authored
This name is a bit misleading, what we do in this helper is trying to find the best SDR timings supported by the controller and the chip. Signed-off-by:
-
Miquel Raynal authored
This is a copy/paste error and belongs to nand_init_data_interface() description. Signed-off-by:
-
Miquel Raynal authored
This is really a NAND controller hook so call it nand_controller_can_setup_data_iface(), which makes much more sense. Signed-off-by:
-
Miquel Raynal authored
The data interface setup does not care about the default timing mode but cares about the actual timing mode at the time of the call of this helper. Use this entry instead and let chip->default_timing_mode only be used at initialization time. Signed-off-by:
-
Miquel Raynal authored
Avoid relying just on the default timing mode to discriminate if the data interface must be restored. This field should only be used at initialization time by legacy chips statically defined. Do a memcmp() instead. Signed-off-by:
-
Miquel Raynal authored
Reorder fields in this structure and pack entries by theme: * The main descriptive structures * The data interface details * Bad block information * The device layout * Extra buffers matching the device layout * Internal values * External objects like the ECC controller, the ECC engine and a private data pointer. While at it, adapt the documentation style. I changed on purpose the description of @oob_poi which was weird. Signed-off-by:
-
Miquel Raynal authored
Now that struct nand_manufacturer type is free, use it to store the nand_manufacturer_desc and the manufacturer's private data. Signed-off-by:
-
Miquel Raynal authored
It is currently called nand_manufacturer but could actually be called nand_manufacturer_desc, like its instances, so that the former name is left unused for now. Signed-off-by:
-
Miquel Raynal authored
And move nand_chip hooks there. While moving entries from one structure to the other, adapt the documentation style. Signed-off-by:
-
Miquel Raynal authored
Mechanical change to avoid using old types. Signed-off-by:
-
Miquel Raynal authored
page_shift, phys_erase_shift, bbt_erase_shift, chip_shift, pagemask, subpagesize and badblockbits are all positive values, so declare them as unsigned. Signed-off-by:
-
Miquel Raynal authored
Prepare the migration to a generic ECC engine by renaming the nand_ecc_req structure into nand_ecc_props. This structure will be the base of a wider 'nand_ecc' structure. In nand_device, these properties are still named "eccreq" even if "eccprops" might be more descriptive. This is just a transition step, this field is being replaced very soon by a much wider structure. The impact of renaming this field would be huge compared to its interest. Signed-off-by:
-
Miquel Raynal authored
Both OneNAND and raw NAND bits can't be compiled if MTD is disabled because of the if/endif logic in drivers/mtd/Kconfig. There is no need for an extra "depends on MTD" in their respective Kconfig files. Signed-off-by:
-
Miquel Raynal authored
Use an extra level in Kconfig for all NAND related entries. Signed-off-by:
-
Miquel Raynal authored
This structure might be used earlier in this file, let's move the forward declaration at the top. Signed-off-by:
-
Boris Brezillon authored
A few drivers use this property to describe GPIO pins used to sample the NAND Ready/Busy state. Let's make it part of the generic binding doc. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Boris Brezillon authored
Let's convert the driver to exec_op() to have one less driver relying on the legacy interface. Signed-off-by:
-
- 15 Jun, 2020 1 commit
-
-
Boris Brezillon authored
Let's convert the driver to exec_op() to have one less driver relying on the legacy interface. Signed-off-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
