Fix the missing clk_disable_unprepare() before return
from rk817_platform_probe() in the error handling case.

Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220307090146.4104-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.

Fixes: 4e28491a ("ASoC: mediatek: mt8192-mt6359: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220308015224.23585-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: afb93d71 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308023325.31702-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the missing clk_disable_unprepare() before return
from rockchip_i2s_probe() in the error handling case.

Fixes: 01605ad1 ("ASoC: rockchip-i2s: enable "hclk" for rockchip I2S controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307083553.26009-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In acp3x_audio_probe() platform_get_irq() may return error, but i2s_irq now
is unsigned int so the error handling is never triggered.

Fixes: 87d71a12 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220305123613.6324-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

In acp5x_audio_probe() platform_get_irq() may return error, but i2s_irq now
is unsigned int so the error handling is never triggered.

Fixes: 87d71a12 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220305123705.3708-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use "bt-sco-pcm-wb" codec dai driver for wb bt audio.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220307033056.11463-1-jiaxin.yu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220307151939.32870-1-zhanglianjie@uniontech.comSigned-off-by: Mark Brown <broonie@kernel.org>

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.

Fixes: a45f8853 ("ASoC: Add driver for PROTO Audio CODEC (with a WM8731)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220308013949.20323-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Sascha Hauer <s.hauer@pengutronix.de>:

This series has some updates for the fsl_sai driver: Some general
cleanup patches, a bugfix in the ip revision checking and finally
the mclk setting is made more accurate and support for 1:1 bclk:mclk
setting is added.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

A couple of updates for Intel and AMD hardware, along with minor
cleanups

Ajit Kumar Pandey (4):
  ASoC: SOF: amd: Flush cache after ATU_BASE_ADDR_GRP register update
  ASoC: SOF: amd: Use semaphore register to synchronize ipc's irq
  ASoC: SOF: amd: Move group register configuration to acp-loader
  ASoC: SOF: amd: Increase ACP_HW_SEM_RETRY_COUNT value

Curtis Malainey (1):
  ASoC: SOF: fix 32 signed bit overflow

Gongjun Song (1):
  ASoC: SOF: Intel: pci-tgl: add RPL-S support

Peter Ujfalusi (2):
  ASoC: SOF: amd: acp-pcm: Take buffer information directly from runtime
  ASoC: SOF: amd: Do not set ipc_pcm_params ops as it is optional

Pierre-Louis Bossart (2):
  ASoC: SOF: debug: clarify operator precedence
  ASoC: SOF: Intel: hda: clarify operator precedence

 include/sound/sof/header.h         |  2 +-
 include/uapi/sound/sof/abi.h       |  2 +-
 sound/soc/sof/amd/acp-dsp-offset.h |  1 +
 sound/soc/sof/amd/acp-ipc.c        | 22 ++++++++++++++--------
 sound/soc/sof/amd/acp-loader.c     |  9 +++++++++
 sound/soc/sof/amd/acp-pcm.c        |  7 ++++---
 sound/soc/sof/amd/acp-stream.c     |  3 +++
 sound/soc/sof/amd/acp.c            | 29 ++++++++++++++---------------
 sound/soc/sof/amd/acp.h            |  3 +--
 sound/soc/sof/amd/renoir.c         |  1 -
 sound/soc/sof/debug.c              |  2 +-
 sound/soc/sof/intel/hda.c          |  2 +-
 sound/soc/sof/intel/pci-tgl.c      |  2 ++
 13 files changed, 52 insertions(+), 33 deletions(-)

--
2.30.2

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Updates to clean-up the GPIOLIB dependency and a quirk for HP
SoundWire devices.

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

This adds support for I2S/TDM links where the slot width varies
depending on the sample width, in a way that cannot be guessed by
component hw_params().

A typical example is:

- 16-bit samples use 16-bit slots
- 24-bit samples use 32-bit slots

There is no way for a component hw_params() to deduce from the information
it is passed that 24-bit samples will be in 32-bit slots.

Some audio hardware cannot support a fixed slot width or a slot width
equal to the sample width in all cases. This is usually due either to
limitations of the audio serial port or system clocking restrictions.

Merge series from Stephan Gerhold <stephan@gerhold.net>:

This series adds a simple driver and DT schema for the Awinic AW8738
audio amplifier. It's fairly simple - the main difference to
simple-amplifier is that there is a "one-wire pulse control" that
allows configuring the amplifier to one of a few pre-defined modes.
This can be used to configure the speaker-guard function (primarily
the power limit for the amplifier).

The "adata->i2s_irq" variable is unsigned so the error handling
will not work.

Fixes: 87d71a12 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131256.GA28739@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

DETECT_MODE and PLL_START must be zero while HP_PDN and ADC_PDN are
both 1. If this condition is broken it can discharge FILT+ and it
can then take up to 1 second for FILT+ to recharge.

There is no workaround required for this, simply avoiding settings
and sequences that would break the requirement. The driver already
meets the requirement.

But it is not obvious from reading the code that this requirement
exists, or what is ensuring it is met. So it would not currently be
obvious to someone changing the code that there is certain special
behaviour that must be maintained.

To avoid accidental breakage in the future:

- Add comments into the register definitions to warn about this so
  that anyone changing the code around DETECT_MODE and PLL_START is
  aware of this requirement.

- Add a comment where PLL_START is written to 1 to highlight the
  requirement and why it is satisfied.

- Add a comment in cs42l42_setup_hs_type_detect() when DETECT_MODE is
  initialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304144015.398656-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The parts supported by this driver can have product-specific
firmware and tunings files. Typically these have been used on
embedded systems where the manufacturer is responsible for
installing the correct product-specific firmware files into
/lib/firmware. However, the linux-firmware repository places all
available firmwares into /lib/firmware and it is up to the driver to
select the correct product-specific firmware from that directory.

For example a product containing four smart amplifiers may provide
firmware specific for that product and each of the amplifiers may
have coefficient files containing tunings for their placement in the
mechanical design.

This change extends firmware (wmfw) and coefficient (bin) filenames
to be of the general form:

<cirrus/>part-dspN-fwtype<-system_name<-asoc_component_prefix>>.type

Where the cirrus subdirectory, system_name and asoc_component_prefix
are optional.

New files will be placed in the cirrus subdirectory to avoid
polluting the main /lib/firmware/ location. The generic name must be
searched in /lib/firmware before /lib/firmware/cirrus so that a
generic file in the new location does not override existing
product-specific files in the legacy location.

The search order for firmware files is:
  - cirrus/part-dspN-fwtype-system_name-asoc_component_prefix.wmfw
  - cirrus/part-dspN-fwtype-system_name.wmfw
  - part-dspN-fwtype.wmfw
  - cirrus/part-dspN-fwtype.wmfw

- Qualifications are added to the filename so that rightwards is more
  specific.
- The system_name is provided by the codec driver.
- The asoc_component_prefix is used to identify tunings for individual
  parts because it would already exist to disambiguate the controls
  and it makes it obvious which firmware file applies to which device.

The optional coefficient file must have the same filename
construction as the discovered wmfw except:
  - where the wmfw has only system_name then the bin file can
    optionally include the asoc_component_prefix. This is to allow a
    common wmfw for all amps but separate tunings per amp.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303155016.122125-1-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: ab6f6d85 ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302062844.46869-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

SC7280 config selected WCD938X instead of WCD938X_SDW Soundwire codecs.
WCD938X_SDW actually selects WCD938X, so directly selecting WCD938X results
in unmet dependencies and below warning

WARNING: unmet direct dependencies detected for SND_SOC_WCD938X
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=m]
 && SND_SOC_WCD938X_SDW [=n] && (SOUNDWIRE [=n] || !SOUNDWIRE [=n])
  Selected by [m]:
  - SND_SOC_SC7280 [=m] && SOUND [=y] && !UML && SND [=y]
 && SND_SOC [=m] && SND_SOC_QCOM [=m] && (I2C [=y] && SOUNDWIRE [=n] ||
 COMPILE_TEST [=y])

Fix this issue by selecting WCD SoundWire codecs instead of component driver.

Fixes: 57350bd4 ("ASoC: qcom: SC7280: Add machine driver")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220304160934.32010-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

cs35l41_private is not used on cs35l41_handle_pdata
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304150721.3802-5-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This device only has 4 TX channels.

Fixes: fe1024d5 ("ASoC: cs35l41: Combine adjacent register writes")
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304150721.3802-3-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Changes:
1. Revise rt5682s_sar_power_mode and rt5682s_headset_detect to be more
   rational.
2. Manually set to the jack-unplugging state via rt5682s_headset_detect
   during going to suspend. Close unnecessary powers and prepare for
   re-detecting the CBJ during resuming.
3. Simplize rt5682s_resume.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220307102154.26065-1-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.

Fixes: a6ba2b2d ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.

Fixes: 531f67e4 ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "adata->i2s_irq" variable is unsigned so this error handling
code will not work.

Fixes: 87d71a12 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131534.GD28739@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

The "adata->pdm_irq" variable is unsigned so the error handling will
not work.

Fixes: 87d71a12 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131335.GB28739@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

The "adata->i2s_irq" is unsigned so this error handling will not
work.

Fixes: 3304a242 ("ASoC: amd: Use platform_get_irq_byname() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131449.GC28739@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

HP changed the DMI identification for 2022 devices:
Product Name: HP Spectre x360 Conv 13-ap0001na
Product Name: 8709
This patch relaxes the DMI_MATCH criterion to work with all versions of this product.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Anthony I Gilea <i@cpp.in>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have eleven machine drivers who make explicit references to
gpios. Let's add the dependency.

The use of 'depends on' instead of 'select' is intentional. On one
side it could be argued that the GPIOs are required, but on the other
it might create more issues with randconfig builds. This patch sticks
with the existing direction of using 'depends' on high-level non-audio
dependencies
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch reverts commit 4262ddc2 ("ASoC: Intel: boards: add
explicit dependency on GPIOLIB when DMIC is used") and all follow-up
additions of this dependency.

Now that the DMIC does not depend on GPIOLIB we can simplify again.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

With higher channel counts, we may need higher clock rates.  Starting
with SAI v3.1 (i.MX8MM), we can bypass the divider and get a 1:1
bclk:mclk ratio. Add the necessary support.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-8-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

In fsl_sai_set_bclk() we want to calculate the divider that gets us
closest to the desired frequency, so use DIV_ROUND_CLOSEST() instead of
just doing a clk_rate/freq.
Also discard invalid ratios earlier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-7-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

"ret" is normally used as a variable name for return values. In
fsl_sai_set_bclk() it stores the difference between the desired rate and
the rate we can archieve, so rename it to "diff". Also rename "savesub"
to "bestdiff" as that stores the best difference we have found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-6-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

The driver tests for the hardware revision being newer than 3.1
with (sai->verid.major >= 3 && sai->verid.minor >= 1). The result
is obviously wrong for hardware revision 4.0. Fix this by storing
the full version in a single variable and comparing to that one.
No practical change at the moment as there is no 4.0 ip version
currently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-5-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Depending on SAI synchronization mode, the same value is either
written to FSL_SAI_TCR2 or FSL_SAI_RCR2 or nothing is written at all.

As the computation is the same either way, factor it out to make it
clearer what the difference is. No functional change.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-4-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of using a boolean "irq_none" to describe the interrupt
handlers return value use a variable of type irqreturn_t and return
it directly. No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-3-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

The fsl_sai driver has FSL_FMT_TRANSMITTER and FSL_FMT_RECEIVER defines
which are used in a single function only then are then only translated
into a bool 'tx' variable. Drop the defines and pass the boolean value
directly to fsl_sai_set_dai_sysclk_tr(). No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-2-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

The Awinic AW8738 is a simple audio amplifier using a single GPIO.
The main difference to simple-amplifier is that there is a "one-wire
pulse control" that allows configuring the amplifier to one of a few
pre-defined modes. This can be used to configure the speaker-guard
function (primarily the power limit for the amplifier).

Add a simple driver that allows setting it up in the device tree
with a specified mode number.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220304102452.26856-3-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Add a DT schema for describing Awinic AW8738 audio amplifiers. They are
fairly simple and controlled using a single GPIO. The number of pulses
during power up selects one of a few pre-defined operation modes. This
can be used to configure the speaker-guard function (primarily the
power limit for the amplifier).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220304102452.26856-2-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Some audio hardware cannot support the same slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
A typical example would be:

- 16-bit samples in 16-bit slots
- 24-bit samples in 32-bit slots

The new dai-tdm-slot-width-map property allows setting a mapping of
sample widths and the corresponding tdm slot widths and slot counts.
Although the slot count is usually the same for all cases this does
allow for adding padding slots to maintain the same bitclk frequency.

The property is added to each endpoint node that needs the component
DAI to be told the TDM slot width and count.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>