proc_resetdevice is called with dev->serialize held.
usb_reset_device takes dev->serialize and then calls
__usb_reset_device.  To avoid deadlock, proc_resetdevice
should call __usb_reset_device directly.
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch enables the pwc driver included with kernel 2.6.7-rc2

It also removes the warnings during compilation.
However, note that I blindly duplicated the release approach used by
other usb camera drivers, replacing the current no-op.

The driver works for me with a Logitech QuickCam Notebook Pro and
GnomeMeeting.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

> Send me a patch to back those changes out to fix your device and I'll
> apply it.  If the author is around to realize this, that should wake
> them up :)

Ok, here you are! :)
Attached is a patch for linux-2.6.7-rc2. (though the patch hasn't changed
since -rc1)

Again a short description:
(the patch removes most of the changes done in linux-2.6.2)
1. Removed the local buffer of cyberjack_write, because something goes wrong
upon a write-request bigger than the buffer. Without this, a write-request
stalls with error -3.
2. Removed some usb_clear_halt() lines. Without this, the device doesn't even
open and returns -7.

It works for my cyberjack pinpad USB card reader on
- nforce2 chipset
- VIA KM266 chipset
- AMD Irongate chipset
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

into suse.cz:/home/vojtech/bk/for-linus

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kernel.bkbits.net:/home/davem/net-2.6

Signed-off-by: Jamal Hadi Salim <hadi@zynx.com>
Signed-off-by: David S. Miller <davem@redhat.com>

When handling FBIOPUTCMAP_SPARC, sbusfb fails to initialize cmap.transp,
which quickly leads to an oops when fb_set_cmap() dereferences it.

First encountered in Aurora Wombat kernels and seems to afflict mainline
as well. Patch is against 2.6.7-rc2. xorg still fails to actually get
anything to display on my CG6, but at least it no longer oopses the kernel.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: David S. Miller <davem@redhat.com>

into kernel.bkbits.net:/home/davem/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This entry in the DMI blacklist table is missing it's NO_MATCH
tags, which means the struct gets padded instead of filled with
the desired NO_MATCH data which is {255, NULL}

Usually not fatal it seems, but there have been numerous cases
in Red Hat bugzilla where this did get tripped up, and caused
an immediate reset on these boards. Not fun to track down.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds a dummy flush_tlb_page_nohash() called by ptep_set_access_bits(),
to be used if we ever have a ppc64 CPU with software loaded TLB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ARGH. Missed one file. Here is an additional patch (missed tlbflush.h patch)

Sorry.

This adds the definiction of flush_tlb_page_nohash() that was missing
from the previous patch fixing SW-TLB loaded PPCs
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The recent introduction of ptep_set_access_flags() with the optimisation
of not flushing the TLB unfortunately broke ppc32 CPUs with no hash
table.

The data access exception code path in assembly for these doesn't
properly deal with the case where the TLB entry is present with the
wrong PAGE_RW and will just call do_page_fault again instead of just
replacing the TLB entry.

Fixing the asm code for all the different CPU types affected (yah,
embedded PPCs all have different MMUs =P) is painful and need testing I
can't do at the moment, so here's a fix that will just flush the TLB
page when changing the access flags on non-hash based machines.  Please
apply.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org

The scheduler changes had another thing missing: the appreciation of
sync wakeups.  (I had this in one of the earlier sched-domains cleanup
patches before but it got lost in the shuffle.)

When a sync waker is waking, we should subtract its load from the
current load - it will schedule away for sure in the near future. 
That's what the "sync" bit means.

This change is necessary because with the sched-domains balancer we have
a much more sensitive cpu-load estimator, and in this particular context
of try_to_wake_up() the sync waker's effect will always be part of the
load.  Patch against your patch attached. 

In my testing there's an additional increase in bw_pipe numbers on a
dual P2 box, it went from 110-120 MB/sec to 120-130 MB/sec. 
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

watchdog.h is using __u8 and __u32 from linux/types.h, so it needs to
include it.

into nuts.davemloft.net:/disk1/BK/net-2.6

Lets just remove it. It's been disabled some time ago, and there's no
chance of it ever getting resurrected. PATA TCQ has so many technical
short comings, that it was never really interesting I'm afraid.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove dead code from task_in_intr() and pre_task_mulout_intr()
(CONFIG_IDE_TASKFILE_IO=n versions).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- move common code to ide_do_rw_disk()
  (+ always print block number and rq->buffer)
- use pr_debug()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove needless exports from ide.c, ide-probe.c and ide-proc.c.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Christoph Hellwig <hch@lst.de>

To be useful for distribution kernels it needs to be a runtime option.
The original patch is from Joerg Platte via the Debian kernel package,
with some adjustments from me (and me too - Bart).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Geert Uytterhoeven wrote:

  While compiling drivers/char/ipmi/ipmi_si_intf.c in 2.6.6-rc1 on m68k,
  I noticed a missing include (needed for disable_irq_nosync() and
  enable_irq()):

  Furthermore none of CONFIG_ACPI_INTERPETER, CONFIG_X86, and CONFIG_PCI
  were set, and thus IPMI_MEM_ADDR_SPACE and IPMI_IO_ADDR_SPACE are not
  defined, but they are used.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds support to the jedec probe for ST M50FW040, M50FW080 and M50FW016 all
Firmware hubs for i8x0 chipsets,
http://www.st.com/stonline/products/families/memories/fl_nor/fl_fwh.htm

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Presently we get procfs warnings from ipmi_si.ko due to its failing to
remove all of a /proc directory's contents prior to removing that
directory.

This patch tracks all proc entries for an IPMI interface and unregisters
them all upon removal.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>