- 23 Dec, 2023 27 commits
-
-
Ioana Ciornei authored
Create separate functions, dpaa2_switch_port_prechangeupper and dpaa2_switch_port_changeupper, to be called directly when a DPSW port changes its upper device. This way we are not open-coding everything in the main event callback and we can easily extent, for example, with bond offload. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The DPSW object has multiple event sources multiplexed over the same IRQ. The driver has the capability to configure only some of these events to trigger the IRQ. The dpsw_get_irq_status() can clear events automatically based on the value stored in the 'status' variable passed to it. We don't want that to happen because we could get into a situation when we are clearing more events than we actually handled. Just resort to manually clearing the events that we handled. Also, since status is not used on the out path we remove its initialization to zero. This change does not have a user-visible effect because the dpaa2-switch driver enables and handles all the DPSW events which exist at the moment. Signed-off-by:
-
Ioana Ciornei authored
Commit 84cba729 ("dpaa2-switch: integrate the MAC endpoint support") added support for MAC endpoints in the dpaa2-switch driver but omitted to add the ENDPOINT_CHANGED irq to the list of interrupt sources. Fix this by extending the list of events which can raise an interrupt by extending the mask passed to the dpsw_set_irq_mask() firmware API. There is no user visible impact even without this patch since whenever a switch interface is connected/disconnected from an endpoint both events are set (LINK_CHANGED and ENDPOINT_CHANGED) and, luckily, the LINK_CHANGED event could actually raise the interrupt and thus get the MAC/PHY SW configuration started. Even with this, it's better to just not rely on undocumented firmware behavior which can change. Signed-off-by:
-
Ioana Ciornei authored
Print a netdev error when we hit a case in which a specific VLAN is already configured on the port. While at it, change the already existing netdev_warn into an _err for consistency purposes. Reviewed-by:
-
Ioana Ciornei authored
There is no restriction around the change of the MAC address on the switch ports, thus declare the interface netdevs IFF_LIVE_ADDR_CHANGE capable. Reviewed-by:
-
Ioana Ciornei authored
There is no point in updating the MAC address of a switch interface each time the link state changes, this only needs to happen in case the endpoint changes (the switch interface is [dis]connected from/to a MAC). Just move the call to dpaa2_switch_port_set_mac_addr() under DPSW_IRQ_EVENT_ENDPOINT_CHANGED. Reviewed-by:
-
David S. Miller authored
Roger Quadros says: ==================== net: ethernet: am65-cpsw: Add mqprio, frame preemption & coalescing This series adds mqprio qdisc offload in channel mode, Frame Preemption MAC merge support and RX/TX coalesing for AM65 CPSW driver. In v11 following changes were made - Fix patch "net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode" by including units.h Changelog information in each patch file. ==================== Signed-off-by: -
Grygorii Strashko authored
Add SW IRQ coalescing based on hrtimers for TX and RX data path which can be enabled by ethtool commands: - RX coalescing ethtool -C eth1 rx-usecs 50 - TX coalescing can be enabled per TX queue - by default enables coalesing for TX0 ethtool -C eth1 tx-usecs 50 - configure TX0 ethtool -Q eth0 queue_mask 1 --coalesce tx-usecs 100 - configure TX1 ethtool -Q eth0 queue_mask 2 --coalesce tx-usecs 100 - configure TX0 and TX1 ethtool -Q eth0 queue_mask 3 --coalesce tx-usecs 100 --coalesce tx-usecs 100 show configuration for TX0 and TX1: ethtool -Q eth0 queue_mask 3 --show-coalesce Comparing to gro_flush_timeout and napi_defer_hard_irqs, this patch allows to enable IRQ coalesing for RX path separately. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Roger Quadros authored
Add driver support for viewing / changing the MAC Merge sublayer parameters and seeing the verification state machine's current state via ethtool. As hardware does not support interrupt notification for verification events we resort to polling on link up. On link up we try a couple of times for verification success and if unsuccessful then give up. The Frame Preemption feature is described in the Technical Reference Manual [1] in section: 12.3.1.4.6.7 Intersperced Express Traffic (IET – P802.3br/D2.0) Due to Silicon Errata i2208 [2] we set limit min IET fragment size to 124 (excluding 4 bytes mCRC). [1] AM62x TRM - https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf [2] AM62x Silicon Errata - https://www.ti.com/lit/er/sprz487c/sprz487c.pdfSigned-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Grygorii Strashko authored
This patch adds MQPRIO Qdisc offload in full 'channel' mode which allows not only setting up pri:tc mapping, but also configuring TX shapers (rate-limiting) on external port FIFOs. The MQPRIO Qdisc offload is expected to work with or without VLAN/priority tagged packets. The CPSW external Port FIFO has 8 Priority queues. The rate-limit can be set for each of these priority queues. Which Priority queue a packet is assigned to depends on PN_REG_TX_PRI_MAP register which maps header priority to switch priority. The header priority of a packet is assigned via the RX_PRI_MAP_REG which maps packet priority to header priority. The packet priority is either the VLAN priority (for VLAN tagged packets) or the thread/channel offset. For simplicity, we assign the same priority queue to all queues of a Traffic Class so it can be rate-limited correctly. Configuration example: ethtool -L eth1 tx 5 ethtool --set-priv-flags eth1 p0-rx-ptype-rrobin off tc qdisc add dev eth1 parent root handle 100: mqprio num_tc 3 \ map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 hw 1 mode channel \ shaper bw_rlimit min_rate 0 100mbit 200mbit max_rate 0 101mbit 202mbit tc qdisc replace dev eth2 handle 100: parent root mqprio num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 hw 1 ip link add link eth1 name eth1.100 type vlan id 100 ip link set eth1.100 type vlan egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 In the above example two ports share the same TX CPPI queue 0 for low priority traffic. 3 traffic classes are defined for eth1 and mapped to: TC0 - low priority, TX CPPI queue 0 -> ext Port 1 fifo0, no rate limit TC1 - prio 2, TX CPPI queue 1 -> ext Port 1 fifo1, CIR=100Mbit/s, EIR=1Mbit/s TC2 - prio 3, TX CPPI queue 2 -> ext Port 1 fifo2, CIR=200Mbit/s, EIR=2Mbit/s Signed-off-by:
-
Roger Quadros authored
Move register definitions to header file. No functional change. Signed-off-by:
-
Roger Quadros authored
Move this code around to avoid forward declaration. No functional change. Signed-off-by:
-
Roger Quadros authored
Handle offloading commands using switch-case in am65_cpsw_setup_taprio(). Move checks to am65_cpsw_taprio_replace(). Use NL_SET_ERR_MSG_MOD for error messages. Change error message from "Failed to set cycle time extension" to "cycle time extension not supported" Signed-off-by:
-
Roger Quadros authored
We will use this Kconfig option to not only enable TAS/EST offload but also other QoS features like Multiqueue priority descriptors and MAC-Merge/Frame Preemption. TI_AM65_CPSW_QOS seems a more appropriate Kconfig option name than TI_AM65_CPSW_TAS. Signed-off-by:
-
Roger Quadros authored
Build am65-cpsw-qos only if CONFIG_TI_AM65_CPSW_TAS is enabled. Signed-off-by:
-
Vladimir Oltean authored
Some devices do not support individual 'pmac' and 'emac' stats. For such devices, resort to 'aggregate' stats. Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
Some devices have errata due to which they cannot report ETH_ZLEN (60) in the rx-min-frag-size. This was foreseen of course, and lldpad has logic that when we request it to advertise addFragSize 0, it will round it up to the lowest value that is _actually_ supported by the hardware. The problem is that the selftest expects lldpad to report back to us the same value as we requested. Make the selftest smarter by figuring out on its own what is a reasonable value to expect. Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== Convert net selftests to run in unique namespace (last part) Here is the last part of converting net selftests to run in unique namespace. This part converts all left tests. After the conversion, we can run the net sleftests in parallel. e.g. # ./run_kselftest.sh -n -t net:reuseport_bpf TAP version 13 1..1 # selftests: net: reuseport_bpf ok 1 selftests: net: reuseport_bpf mod 10... # Socket 0: 0 # Socket 1: 1 ... # Socket 4: 19 # Testing filter add without bind... # SUCCESS # ./run_kselftest.sh -p -n -t net:cmsg_so_mark.sh -t net:cmsg_time.sh -t net:cmsg_ipv6.sh TAP version 13 1..3 # selftests: net: cmsg_so_mark.sh ok 1 selftests: net: cmsg_so_mark.sh # selftests: net: cmsg_time.sh ok 2 selftests: net: cmsg_time.sh # selftests: net: cmsg_ipv6.sh ok 3 selftests: net: cmsg_ipv6.sh # ./run_kselftest.sh -p -n -c net TAP version 13 1..95 # selftests: net: reuseport_bpf_numa ok 3 selftests: net: reuseport_bpf_numa # selftests: net: reuseport_bpf_cpu ok 2 selftests: net: reuseport_bpf_cpu # selftests: net: sk_bind_sendto_listen ok 9 selftests: net: sk_bind_sendto_listen # selftests: net: reuseaddr_conflict ok 5 selftests: net: reuseaddr_conflict ... Here is the part 1 link: https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com part 2 link: https://lore.kernel.org/netdev/20231206070801.1691247-1-liuhangbin@gmail.com part 3 link: https://lore.kernel.org/netdev/20231213060856.4030084-1-liuhangbin@gmail.com ==================== Signed-off-by:
-
Hangbin Liu authored
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests in namespace in parallel. With this, we can save a lot of testing time. Note that some tests may not fit to run in namespace, e.g. net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns. I also added another parameter -p to make all the logs reported separately instead of mixing them in the stdout or output.log. Nit: the NUM in run_one is not used, rename it to test_num. Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh Here is the test result after conversion. # ./pmtu.sh TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] TEST: ipv6: PMTU exceptions [ OK ] TEST: ipv6: PMTU exceptions - nexthop objects [ OK ] ... TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv6: list and flush cached exceptions [ OK ] TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv4: PMTU exception w/route replace [ OK ] TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ] TEST: ipv6: PMTU exception w/route replace [ OK ] TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ] Signed-off-by:
-
Hangbin Liu authored
The setup_loopback and setup_veth use their own way to create namespace. So let's just re-define server_ns/client_ns to unique name. At the same time update the namespace name in gro.sh and toeplitz.sh. As I don't have env to run toeplitz.sh. Here is only the gro test result. # ./gro.sh running test ipv4 data Expected {200 }, Total 1 packets Received {200 }, Total 1 packets. ... Gro::large test passed. All Tests Succeeded! Acked-by: -
Hangbin Liu authored
Here is the test result after conversion. # ./xfrm_policy.sh PASS: policy before exception matches PASS: ping to .254 bypassed ipsec tunnel (exceptions) PASS: direct policy matches (exceptions) PASS: policy matches (exceptions) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies) PASS: direct policy matches (exceptions and block policies) PASS: policy matches (exceptions and block policies) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes) PASS: direct policy matches (exceptions and block policies after hresh changes) PASS: policy matches (exceptions and block policies after hresh changes) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3) PASS: direct policy matches (exceptions and block policies after hthresh change in ns3) PASS: policy matches (exceptions and block policies after hthresh change in ns3) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal) PASS: direct policy matches (exceptions and block policies after htresh change to normal) PASS: policy matches (exceptions and block policies after htresh change to normal) PASS: policies with repeated htresh change Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./stress_reuseport_listen.sh listen 24000 socks took 0.47714 Acked-by:
-
Hangbin Liu authored
When running the test in namespace, the debugfs may not load automatically. So add a checking to make sure debugfs loaded. Here is the test result after conversion. # ./rtnetlink.sh PASS: policy routing PASS: route get ... PASS: address proto IPv4 PASS: address proto IPv6 Acked-by:
-
Hangbin Liu authored
This test will move the device to netns 1. Add a new test_ns to do this. Here is the test result after conversion. # ./netns-name.sh netns-name.sh [ OK ] Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./gre_gso.sh TEST: GREv6/v4 - copy file w/ TSO [ OK ] TEST: GREv6/v4 - copy file w/ GSO [ OK ] TEST: GREv6/v6 - copy file w/ TSO [ OK ] TEST: GREv6/v6 - copy file w/ GSO [ OK ] Tests passed: 4 Tests failed: 0 Acked-by: -
Jiapeng Chong authored
No functional modification involved. ./tools/testing/selftests/net/tcp_ao/setsockopt-closed.c:121:2-3: Unneeded semicolon. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7771Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
- 22 Dec, 2023 13 commits
-
-
Dmitry Safonov authored
Trivial fix for out-of-tree build that I wasn't testing previously: 1. Create a directory for library object files, fixes: > gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c > Assembler messages: > Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory > make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1 2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes: > In file included from lib/kconfig.c:6: > lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration > 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg, > | ^~~~~~~~~~ ... 3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore since commit f2745dc0 ("selftests: stop using KSFT_KHDR_INSTALL") 4. Also, while at here, drop .DEFAULT_GOAL definition: that has a self-explaining comment, that was valid when I made these selftests compile on local v4.19 kernel, but not needed since commit 8ce72dc3 ("selftests: fix headers_install circular dependency") Fixes: cfbab37b ("selftests/net: Add TCP-AO library") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Jonathan Corbet authored
Remove documentation for nonexistent struct members, addressing these warnings: ./net/tipc/link.c:228: warning: Excess struct member 'media_addr' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'timer' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'refcnt' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'proto_msg' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'pmsg' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'backlog_limit' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'exp_msg_count' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'reset_rcv_checkpt' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'transmitq' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'snt_nxt' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'deferred_queue' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'unacked_window' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'next_out' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'long_msg_seq_no' description in 'tipc_link' ./net/tipc/link.c:228: warning: Excess struct member 'bc_rcvr' description in 'tipc_link' Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jonathan Corbet authored
Remove documentation for nonexistent structure members, addressing these warnings: ./include/linux/skbuff.h:1063: warning: Excess struct member 'sp' description in 'sk_buff' ./include/linux/skbuff.h:1063: warning: Excess struct member 'nf_bridge' description in 'sk_buff' Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== tcp: Refactor bhash2 and remove sk_bind2_node. This series refactors code around bhash2 and remove some bhash2-specific fields; sock.sk_bind2_node, and inet_timewait_sock.tw_bind2_node. patch 1 : optimise bind() for non-wildcard v4-mapped-v6 address patch 2 - 4 : optimise bind() conflict tests patch 5 - 12 : Link bhash2 to bhash and unlink sk from bhash2 to remove sk_bind2_node The patch 8 will trigger a false-positive error by checkpatch. v2: resend of https://lore.kernel.org/netdev/20231213082029.35149-1-kuniyu@amazon.com/ * Rebase on latest net-next * Patch 11 * Add change in inet_diag_dump_icsk() for recent bhash dump patch v1: https://lore.kernel.org/netdev/20231023190255.39190-1-kuniyu@amazon.com/ ==================== Signed-off-by: -
Kuniyuki Iwashima authored
Now all sockets including TIME_WAIT are linked to bhash2 using sock_common.skc_bind_node. We no longer use inet_bind2_bucket.deathrow, sock.sk_bind2_node, and inet_timewait_sock.tw_bind2_node. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Now we can use sk_bind_node/tw_bind_node for bhash2, which means we need not link TIME_WAIT sockets separately. The dead code and sk_bind2_node will be removed in the next patch. Signed-off-by:
-
Kuniyuki Iwashima authored
Now we do not use tb->owners and can unlink sockets from bhash. sk_bind_node/tw_bind_node are available for bhash2 and will be used in the following patch. Signed-off-by:
-
Kuniyuki Iwashima authored
We use hlist_empty(&tb->owners) to check if the bhash bucket has a socket. We can check the child bhash2 buckets instead. For this to work, the bhash2 bucket must be freed before the bhash bucket. Signed-off-by:
-
Kuniyuki Iwashima authored
Sockets in bhash are also linked to bhash2, but TIME_WAIT sockets are linked separately in tb2->deathrow. Let's replace tb->owners iteration in inet_csk_bind_conflict() with two iterations over tb2->owners and tb2->deathrow. This can be done safely under bhash's lock because socket insertion/ deletion in bhash2 happens with bhash's lock held. Note that twsk_for_each_bound_bhash() will be removed later. Signed-off-by:
-
Kuniyuki Iwashima authored
The following patch adds code in the !inet_use_bhash2_on_bind(sk) case in inet_csk_bind_conflict(). To avoid adding nest and make the change cleaner, this patch rearranges tests in inet_csk_bind_conflict(). Signed-off-by:
-
Kuniyuki Iwashima authored
bhash2 added a new member sk_bind2_node in struct sock to link sockets to bhash2 in addition to bhash. bhash is still needed to search conflicting sockets efficiently from a port for the wildcard address. However, bhash itself need not have sockets. If we link each bhash2 bucket to the corresponding bhash bucket, we can iterate the same set of the sockets from bhash2 via bhash. This patch links bhash2 to bhash only, and the actual use will be in the later patches. Finally, we will remove sk_bind2_node. Signed-off-by:
-
Kuniyuki Iwashima authored
Later, we no longer link sockets to bhash. Instead, each bhash2 bucket is linked to the corresponding bhash bucket. Then, we pass the bhash bucket to bhash2 allocation functions as tb. However, tb is already used in inet_bind2_bucket_create() and inet_bind2_bucket_init() as the bhash2 bucket. To make the following diff clear, let's use tb2 for the bhash2 bucket there. Signed-off-by:
-
Kuniyuki Iwashima authored
inet_bind2_bucket_addr_match() and inet_bind2_bucket_match_addr_any() are called for each bhash2 bucket to check conflicts. Thus, we call ipv6_addr_any() and ipv6_addr_v4mapped() over and over during bind(). Let's avoid calling them by saving the address type in inet_bind2_bucket. Signed-off-by:
-
