- 06 Apr, 2023 8 commits
-
-
Paul Blakey authored
Actions that can be setup per flow attribute (so per split rule) are cleaned up from mlx5_free_flow_attr(), mlx5e_tc_del_fdb_flow(), and free_flow_post_acts(). Remove the duplication by re-using the helper function for the main flow attribute and split rules attributes. Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Paul Blakey authored
vf_tun is being assigned but never being used so remove it. Signed-off-by:
-
Paul Blakey authored
Many parsers of tc actions just return true on their can_offload() implementation, without checking the input flow/action. Set the default can_offload action to true (allow), and avoid having many can_offload implementations that do just that. This patch doesn't change any functionality. Signed-off-by:
-
Pedro Tammela authored
For the sake of readability, use the netlink payload helpers from the 'nla_get_*()' family to parse the attributes. tdc results: 1..5 ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues) ok 2 453a - Delete nonexistent mqprio Qdisc ok 3 5292 - Delete mqprio Qdisc twice ok 4 45a9 - Add mqprio Qdisc to single-queue device ok 5 2ba9 - Show mqprio class Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Rob Herring authored
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as no immediate child nodes have an address. What was probably intended was to put them in the 'ports' node, but that's not necessary as that is covered by ethernet-switch.yaml via dsa.yaml. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The schema doesn't allow for a single (unaddressed) ethernet port node nor does a single port switch make much sense. So if there's always multiple child nodes, "#address-cells" and "#size-cells" should be required. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 Smaller pull request this time, sending this early to fix the conflict in mac80211. Nothing really special this time, only smaller changes. * enable Wi-Fi 7 (EHT) mesh support * tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits) wifi: rt2x00: Fix memory leak when handling surveys wifi: b43legacy: Remove the unused function prev_slot() wifi: rtw89: Remove redundant pci_clear_master wifi: rtw89: fix potential race condition between napi_init and napi_enable wifi: rtw89: config EDCCA threshold during scan to prevent TX failed wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering wifi: rtw89: remove superfluous H2C of join_info wifi: rtw89: set data lowest rate according to AP supported rate wifi: rtw89: add counters of register-based H2C/C2H wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1 wifi: rtw89: coex: Add report control v5 variation wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B bcma: remove unused mips_read32 function bcma: Use of_address_to_resource() wifi: mwifiex: remove unused evt_buf variable wifi: brcmsmac: ampdu: remove unused suc_mpdu variable wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg() wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg() ... ==================== Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.deSigned-off-by:
-
- 05 Apr, 2023 2 commits
-
-
Simon Horman authored
The arguments passed to the trace events are of type unsigned int, however the signature of the events used __le32 parameters. I may be missing the point here, but sparse flagged this and it does seem incorrect to me. net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h): ./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32 ./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer ./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer ... (a lot more similar warnings) net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service net/qrtr/ns.c:115:47: got unsigned int service net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types) ... (a lot more similar warnings) Fixes: dfddb540 ("net: qrtr: Add tracepoint support") Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.orgSigned-off-by:
-
Heiner Kallweit authored
Enable EDPD PHY tunable support for the G12A internal PHY, reusing the recently added tunable support in the smsc driver. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/8d309575-067c-7321-33cf-6ffac11f7c8d@gmail.comSigned-off-by:
-
- 04 Apr, 2023 13 commits
-
-
Oliver Hartkopp authored
USB IDs are usually represented in 16 bit hexadecimal values. To match the common representation in lsusb and for searching USB IDs in the internet convert the decimal values to lowercase hexadecimal. changes since v1: https://lore.kernel.org/all/20230327175344.4668-1-socketcan@hartkopp.net - drop the aligned block indentation (suggested by Jimmy) - use lowercase hex values (suggested by Alex) Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Jimmy Assarsson <extja@kvaser.com> Reviewed-by:
Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/all/20230329090915.3127-1-socketcan@hartkopp.netSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Frank Jungclaus authored
Announce that the driver supports CAN_CTRLMODE_BERR_REPORTING by means of priv->can.ctrlmode_supported. Until now berr reporting always has been active without taking care of the berr-reporting parameter given to an "ip link set ..." command. Additionally apply some changes to function esd_usb_rx_event(): - If berr reporting is off and it is also no state change, then immediately return. - Unconditionally (even in case of the above "immediate return") store tx- and rx-error counters, so directly use priv->bec.txerr and priv->bec.rxerr instead of intermediate variables. - Not directly related, but to better point out the linkage between a failed alloc_can_err_skb() and stats->rx_dropped++: Move the increment of the rx_dropped statistic counter (back) to directly behind the err_skb allocation. Signed-off-by:
Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/all/20230330184446.2802135-1-frank.jungclaus@esd.euSigned-off-by:
-
Peng Fan authored
Add optional power-domains property for i.MX8 usage. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Acked-by:
-
Geert Uytterhoeven authored
Fix the following compile warning with C=1: | drivers/net/can/rcar/rcar_canfd.c:1852:59: warning: Using plain integer as NULL pointer Fixes: a0340df7 ("can: rcar_canfd: Add transceiver support") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/all/7f7b0dde0caa2d2977b4fb5b65b63036e75f5022.1680071972.git.geert+renesas@glider.beSigned-off-by:
-
Paolo Abeni authored
Arseniy Krasnov says: ==================== vsock: return errors other than -ENOMEM to socket this patchset removes behaviour, where error code returned from any transport was always switched to ENOMEM. This works in the same way as patch from Bobby Eshleman: commit c43170b7 ("vsock: return errors other than -ENOMEM to socket"), but for receive calls. VMCI transport is also updated (both tx and rx SOCK_STREAM callbacks), because it returns VMCI specific error code to af_vsock.c (like VMCI_ERROR_*). Tx path is already merged to net, so it was excluded from patchset in v4. At the same time, virtio and Hyper-V transports are using general error codes, so there is no need to update them. vsock_test suite is also updated. Link to v1: https://lore.kernel.org/netdev/97f19214-ba04-c47e-7486-72e8aa16c690@sberdevices.ru/ Link to v2: https://lore.kernel.org/netdev/60abc0da-0412-6e25-eeb0-8e32e3ec21e7@sberdevices.ru/ Link to v3: https://lore.kernel.org/netdev/dead4842-333a-015e-028b-302151336ff9@sberdevices.ru/ ==================== Link: https://lore.kernel.org/r/0d20e25a-640c-72c1-2dcb-7a53a05e3132@sberdevices.ruSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Arseniy Krasnov authored
This updates expected return values for invalid buffer test. Now such values are returned from transport, not from af_vsock.c. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arseniy Krasnov authored
This removes behaviour, where error code returned from any transport was always switched to ENOMEM. This works in the same way as: commit c43170b7 ("vsock: return errors other than -ENOMEM to socket"), but for receive calls. Signed-off-by:
-
Arseniy Krasnov authored
This adds conversion of VMCI specific error code to general -ENOMEM. It is preparation for the next patch, which changes af_vsock.c behaviour on receive to pass value returned from transport to the user. Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
-
Jakub Kicinski authored
Íñigo Huguet says: ==================== sfc: support unicast PTP Unicast PTP was not working with sfc NICs. The reason was that these NICs don't timestamp all incoming packets, but instead they only timestamp packets of the queues that are selected for that. Currently, only one RX queue is configured for timestamp: the RX queue of the PTP channel. The packets that are put in the PTP RX queue are selected according to firmware filters configured from the driver. Multicast PTP was already working because the needed filters are known in advance, so they're inserted when PTP is enabled. This patches add the ability to dynamically add filters for unicast addresses, extracted from the TX PTP-event packets. Since we don't know in advance how many filters we'll need, some info about the filters need to be saved. This will allow to check if a filter already exists or if a filter is too old and should be removed. Note that the previous point is unnecessary for multicast filters, but I've opted to change how they're handled to match the new unicast's filters to avoid having duplicate insert/remove_filters functions, once for each type of filter. Tested: With ptp4l, all combinations of IPv4/IPv6, master/slave and unicast/multicast Reported-by:
Yalin Li <yalli@redhat.com> ==================== Link: https://lore.kernel.org/r/20230331111404.17256-1-ihuguet@redhat.comSigned-off-by:
-
Íñigo Huguet authored
Filters inserted to support unicast PTP mode might become unused after some time, so we need to remove them to avoid accumulating many of them. Refresh the expiration time of a filter each time it's used. Then check periodically if any filter hasn't been used for a long time (30s) and remove it. Reported-by:
Íñigo Huguet <ihuguet@redhat.com> Reviewed-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Íñigo Huguet authored
When sending a PTP event packet, add the correct filters that will make that future incoming unicast PTP event packets will be timestamped. The unicast address for the filter is gotten from the outgoing skb before sending it. Until now they were not timestamped because only filters that match with the PTP multicast addressed were being configured into the NIC for the PTP special channel. Packets received through different channels are not timestamped, getting "received SYNC without timestamp" error in ptp4l. Note that the inserted filters are never removed unless the NIC is stopped or reconfigured, so efx_ptp_stop is called. Removal of old filters will be handled by the next patch. Additionally, cleanup a bit efx_ptp_xmit_skb_mc to use the reverse xmas tree convention and remove an unnecessary assignment to rc variable in void function. Reported-by:
-
Íñigo Huguet authored
Add a second list for unicast filters and generalize the efx_ptp_insert/remove_filters functions to allow acting in any of the 2 lists. No filters for unicast are inserted yet. That will be done in the next patch. The reason to use 2 different lists instead of a single one is that, in next patches, we will want to check if unicast filters are already added and if they're expired. We don't need that for multicast filters. Reported-by:
-
Íñigo Huguet authored
Instead of using a fixed sized array for the PTP filters, use a list. This is not actually necessary at this point because the filters for multicast PTP are a fixed number, but this is a preparation for the following patches adding support for unicast PTP. To avoid confusion with the new struct type efx_ptp_rxfilter, change the name of some local variables from rxfilter to spec, given they're of the type efx_filter_spec. Reported-by:
-
- 03 Apr, 2023 17 commits
-
-
Armin Wolf authored
When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. Fixes: 54476269 ("rt2x00: save survey for every channel visited") Signed-off-by:Armin Wolf <W_Armin@gmx.de> Reviewed-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
-
Jiapeng Chong authored
The function prev_slot is defined in the dma.c file, but not called elsewhere, so remove this unused function. drivers/net/wireless/broadcom/b43legacy/dma.c:130:19: warning: unused function 'prev_slot'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4642Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Cai Huoqing authored
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by:Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
A race condition can happen if netdev is registered, but NAPI isn't initialized yet, and meanwhile user space starts the netdev that will enable NAPI. Then, it hits BUG_ON(): kernel BUG at net/core/dev.c:6423! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91 Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022 RIP: 0010:napi_enable+0x3f/0x50 Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ... RSP: 0018:ffffada1414f3548 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000 RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58 R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001 FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8] rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] __dev_open+0xe0/0x180 __dev_change_flags+0x1da/0x250 dev_change_flags+0x26/0x70 do_setlink+0x37c/0x12c0 ? ep_poll_callback+0x246/0x290 ? __nla_validate_parse+0x61/0xd00 ? __wake_up_common_lock+0x8f/0xd0 To fix this, follow Jonas' suggestion to switch the order of these functions and move register netdev to be the last step of PCI probe. Also, correct the error handling of rtw89_core_register_hw(). Fixes: e3ec7017 ("rtw89: add Realtek 802.11ax driver") Cc: stable@vger.kernel.org Reported-by:
Hyeonggon Yoo <42.hyeyoo@gmail.com> Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#tSuggested-by:
Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Larry Finger<Larry.Finger@lwfinger.net> Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by:
-
Chih-Kang Chang authored
Need to configure EDCCA threshold to default value before scan, and recall original value after scan to prevent probe request can't be sent out. Signed-off-by:
Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by:
-
Chih-Kang Chang authored
We use ppdu_sts to obtain channel information from hardware, to ensure that the scan results have correct channel information. However, some of ppdu_sts that is filtered by the to_self check is also needed for the scan results. Therefore, we modify the filter part in front of CFO count. Signed-off-by:
-
Chin-Yen Lee authored
We find that when starting WoWLAN, the second join_info H2C is unnecessary and leads WoWLAN not enter power save mode if using new firmware, so remove it. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
Chih-Kang Chang authored
By default the driver uses the 1M and 6M rate (0x0) for data frames in 2 GHz and 5/6 GHz bands respectively. But the rate that might not AP supported. Therefore, We modify the data lowest rate according to the lowest of AP supported rate. Signed-off-by:
-
Ping-Ke Shih authored
The register-based H2C/C2H are used to exchange information between driver and firmware, but only apply to narrow area because its data size is smaller than regular packet-based H2C/C2H. This kind of H2C/C2H must be paired. To identify if any H2C/C2H is missing, update counters to help diagnose this kind of problems. Signed-off-by:
-
Ching-Te Ku authored
Update driver with the supported firmware version of the below item. Bluetooth firmware BT_Coex_Ver: 0x07 Wi-Fi firmware version: RTL8852C->v0.27.56.10 RTL8852A->v0.24.36 RTL8852B->v0.29.29 Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
In order to reduce firmware code size cost, remove some counter value from the structure. But firmware didn't update version code. To parse the correct report, add another variation version v105 to parse it. Signed-off-by:
-
Ching-Te Ku authored
The LNA gain didn't set before, it will lead some WiFi RX issue. And the setting can increase both of WiFi & BT performance while they are both RX. Signed-off-by:
-
Ching-Te Ku authored
If driver enable firmware report during WiFi power saving, the firmware timer will lead to some power saving issue like, fail to enter LPS, can not leave LPS or some unexpected issue. Signed-off-by:
-
Ching-Te Ku authored
This LPS state will not turn off RF, and it can still do some basic traffic, only RTL8852B has the state. Coexistence need let Bluetooth know WiFi is still alive to prevent some Bluetooth performance issue. Signed-off-by:
-
David S. Miller authored
Daniel Golle says: ==================== net: dsa: add support for MT7988 The MediaTek MT7988 SoC comes with a built-in switch very similar to previous MT7530 and MT7531. However, the switch address space is mapped into the SoCs memory space rather than being connected via MDIO. Using MMIO simplifies register access and also removes the need for a bus lock, and for that reason also makes interrupt handling more light-weight. Note that this is different from previous SoCs like MT7621 and MT7623N which also came with an integrated MT7530-like switch which yet had to be accessed via MDIO. Split-off the part of the driver registering an MDIO driver, then add another module acting as MMIO/platform driver. The whole series has been tested on various MediaTek boards: * MT7623A + MT7530 (BPi-R2) * MT7986A + MT7531 (BPi-R3) * MT7988A reference board Changes since v1: * use 'internal' PHY mode where appropriate * use regmap_update_bits in mt7530_rmw * improve dt-bindings Changes since RFC v3: * WARN_ON_ONCE if register read fails * move probing of the reset GPIO and reset controller link out of common probe function, as they are not actually common Changes since RFC v2: * split into many small commits to ease review * introduce helper functions to reduce code duplication * use helpers for locking to make lock-skipping easier and less ugly to implement. * add dt-bindings for mediatek,mt7988-switch Changes since initial RFC: * use regmap for register access and move register access to bus- specific driver * move initialization of MT7531 SGMII PCS to MDIO driver ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Daniel Golle authored
Add documentation for the built-in switch which can be found in the MediaTek MT7988 SoC. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Daniel Golle authored
Add driver for the built-in Gigabit Ethernet switch which can be found in the MediaTek MT7988 SoC. The switch shares most of its design with MT7530 and MT7531, but has it's registers mapped into the SoCs register space rather than being connected externally or internally via MDIO. Introduce a new platform driver to support that. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
