1. 06 Feb, 2013 3 commits
  2. 05 Feb, 2013 5 commits
  3. 04 Feb, 2013 8 commits
    • Peter Hurley's avatar
      pty: Ignore slave open count for master pty open · 80cace72
      Peter Hurley authored
      Multiple slave pty opens may be performed in parallel with the
      master open. Of course, all the slave opens will fail because the
      master pty is still locked but during this time the slave pty
      count will be artificially greater than 1. This is should not
      cause the master pty open to fail.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      80cace72
    • Peter Hurley's avatar
      tty: Document required behavior of tty driver close() · 7be88b4c
      Peter Hurley authored
      If the tty driver open() fails, the tty driver close() is still
      called during the resultant tty release.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7be88b4c
    • Peter Hurley's avatar
      pty: Ignore slave pty close() if never successfully opened · 69939035
      Peter Hurley authored
      If the master and slave ptys are opened in parallel, the slave open
      fails because the pty is still locked. This is as designed.
      However, pty_close() is still called for the slave pty which sets
      TTY_OTHER_CLOSED in the master pty. This can cause the master open
      to fail as well.
      
      Use a common pattern in other tty drivers by setting TTY_IO_ERROR
      until the open is successful and only closing the pty if not set.
      
      Note: the master pty always closes regardless of whether the open
      was successful, so that proper cleanup can occur.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      69939035
    • Peter Hurley's avatar
      pty: Fix BUG()s when ptmx_open() errors out · 7acf6cd8
      Peter Hurley authored
      If pmtx_open() fails to get a slave inode or fails the pty_open(),
      the tty is released as part of the error cleanup. As evidenced by the
      first BUG stacktrace below, pty_close() assumes that the linked pty has
      a valid, initialized inode* stored in driver_data.
      
      Also, as evidenced by the second BUG stacktrace below, pty_unix98_shutdown()
      assumes that the master pty's driver_data has been initialized.
      
      1) Fix the invalid assumption in pty_close().
      2) Initialize driver_data immediately so proper devpts fs cleanup occurs.
      
      Fixes this BUG:
      
      [  815.868844] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
      [  815.869018] IP: [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
      [  815.869190] PGD 7c775067 PUD 79deb067 PMD 0
      [  815.869315] Oops: 0000 [#1] PREEMPT SMP
      [  815.869443] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi microcode snd_rawmidi psmouse serio_raw snd_seq_midi_event snd_seq snd_timer$
      [  815.870025] CPU 0
      [  815.870143] Pid: 27819, comm: stress_test_tty Tainted: G        W    3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs
      [  815.870386] RIP: 0010:[<ffffffff81207bcc>]  [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
      [  815.870540] RSP: 0018:ffff88007d3e1ac8  EFLAGS: 00010282
      [  815.870661] RAX: ffff880079c20800 RBX: 0000000000000000 RCX: 0000000000000000
      [  815.870804] RDX: ffff880079c209a8 RSI: 0000000000000286 RDI: 0000000000000000
      [  815.870933] RBP: ffff88007d3e1ae8 R08: 0000000000000000 R09: 0000000000000000
      [  815.871078] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88007bfb7e00
      [  815.871209] R13: 0000000000000005 R14: ffff880079c20c00 R15: ffff880079c20c00
      [  815.871343] FS:  00007f2e86206700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
      [  815.871495] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [  815.871617] CR2: 0000000000000028 CR3: 000000007ae56000 CR4: 00000000000006f0
      [  815.871752] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  815.871902] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      [  815.872012] Process stress_test_tty (pid: 27819, threadinfo ffff88007d3e0000, task ffff88007c874530)
      [  815.872012] Stack:
      [  815.872012]  ffff88007bfb7e00 ffff880079c20c00 ffff88007bfb7e00 0000000000000005
      [  815.872012]  ffff88007d3e1b08 ffffffff81417be7 ffff88007caa9bd8 ffff880079c20800
      [  815.872012]  ffff88007d3e1bc8 ffffffff8140e5f8 0000000000000000 0000000000000000
      [  815.872012] Call Trace:
      [  815.872012]  [<ffffffff81417be7>] pty_close+0x157/0x170
      [  815.872012]  [<ffffffff8140e5f8>] tty_release+0x138/0x580
      [  815.872012]  [<ffffffff816d29f3>] ? _raw_spin_lock+0x23/0x30
      [  815.872012]  [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40
      [  815.872012]  [<ffffffff816d0178>] ? __mutex_unlock_slowpath+0x48/0x60
      [  815.872012]  [<ffffffff81417dff>] ptmx_open+0x11f/0x180
      [  815.872012]  [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0
      [  815.872012]  [<ffffffff8118d643>] do_dentry_open+0x203/0x290
      [  815.872012]  [<ffffffff811938b0>] ? cdev_put+0x30/0x30
      [  815.872012]  [<ffffffff8118d705>] finish_open+0x35/0x50
      [  815.872012]  [<ffffffff8119dcce>] do_last+0x6fe/0xe90
      [  815.872012]  [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880
      [  815.872012]  [<ffffffff810909d5>] ? cpuacct_charge+0x75/0x80
      [  815.872012]  [<ffffffff8119e51c>] path_openat+0xbc/0x4e0
      [  815.872012]  [<ffffffff816d0fd0>] ? __schedule+0x400/0x7f0
      [  815.872012]  [<ffffffff8140e956>] ? tty_release+0x496/0x580
      [  815.872012]  [<ffffffff8119ec11>] do_filp_open+0x41/0xa0
      [  815.872012]  [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40
      [  815.872012]  [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140
      [  815.872012]  [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0
      [  815.872012]  [<ffffffff8118eb51>] sys_open+0x21/0x30
      [  815.872012]  [<ffffffff816da499>] system_call_fastpath+0x16/0x1b
      [  815.872012] Code: 0f 1f 80 00 00 00 00 45 31 e4 eb d7 0f 0b 90 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 48 89 fb 4c 89 65 f0 4c 89 6d f8 <48> 8b 47 28 48 81 78 58 d1 1c 0$
      [  815.872012] RIP  [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
      [  815.872012]  RSP <ffff88007d3e1ac8>
      [  815.872012] CR2: 0000000000000028
      [  815.897036] ---[ end trace eadf50b7f34e47d5 ]---
      
      Fixes this BUG also:
      
      [  608.366836] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
      [  608.366948] IP: [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
      [  608.367050] PGD 7c75b067 PUD 7b919067 PMD 0
      [  608.367135] Oops: 0000 [#1] PREEMPT SMP
      [  608.367201] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event microcode snd_seq psmouse snd_timer snd_seq_device serio_raw snd mac_hid soundcore snd_page_alloc rfcomm virtio_balloon parport_pc bnep bluetooth ppdev i2c_piix4 lp parport floppy
      [  608.367617] CPU 2
      [  608.367669] Pid: 1918, comm: stress_test_tty Tainted: G        W    3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs
      [  608.367796] RIP: 0010:[<ffffffff812078d8>]  [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
      [  608.367885] RSP: 0018:ffff88007ae41a88  EFLAGS: 00010286
      [  608.367951] RAX: ffffffff81417e80 RBX: ffff880036472400 RCX: 0000000180400028
      [  608.368010] RDX: ffff880036470004 RSI: 0000000000000004 RDI: 0000000000000000
      [  608.368010] RBP: ffff88007ae41a98 R08: 0000000000000000 R09: 0000000000000001
      [  608.368010] R10: ffffea0001f22e40 R11: ffffffff814151d5 R12: 0000000000000004
      [  608.368010] R13: ffff880036470000 R14: 0000000000000004 R15: ffff880036472400
      [  608.368010] FS:  00007ff7a5268700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
      [  608.368010] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [  608.368010] CR2: 0000000000000028 CR3: 000000007a0fd000 CR4: 00000000000006e0
      [  608.368010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  608.368010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      [  608.368010] Process stress_test_tty (pid: 1918, threadinfo ffff88007ae40000, task ffff88003688dc40)
      [  608.368010] Stack:
      [  608.368010]  ffff880036472400 0000000000000001 ffff88007ae41aa8 ffffffff81417e98
      [  608.368010]  ffff88007ae41ac8 ffffffff8140c42b ffff88007ac73100 ffff88007ac73100
      [  608.368010]  ffff88007ae41b98 ffffffff8140ead5 ffff88007ae41b38 ffff88007ca40e40
      [  608.368010] Call Trace:
      [  608.368010]  [<ffffffff81417e98>] pty_unix98_shutdown+0x18/0x20
      [  608.368010]  [<ffffffff8140c42b>] release_tty+0x3b/0xe0
      [  608.368010]  [<ffffffff8140ead5>] __tty_release+0x575/0x5d0
      [  608.368010]  [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30
      [  608.368010]  [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40
      [  608.368010]  [<ffffffff816d03e8>] ? __mutex_unlock_slowpath+0x48/0x60
      [  608.368010]  [<ffffffff8140ef79>] tty_open+0x449/0x5f0
      [  608.368010]  [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0
      [  608.368010]  [<ffffffff8118d643>] do_dentry_open+0x203/0x290
      [  608.368010]  [<ffffffff811938b0>] ? cdev_put+0x30/0x30
      [  608.368010]  [<ffffffff8118d705>] finish_open+0x35/0x50
      [  608.368010]  [<ffffffff8119dcce>] do_last+0x6fe/0xe90
      [  608.368010]  [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880
      [  608.368010]  [<ffffffff8119e51c>] path_openat+0xbc/0x4e0
      [  608.368010]  [<ffffffff8119ec11>] do_filp_open+0x41/0xa0
      [  608.368010]  [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40
      [  608.368010]  [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140
      [  608.368010]  [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0
      [  608.368010]  [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30
      [  608.368010]  [<ffffffff8118eb51>] sys_open+0x21/0x30
      [  608.368010]  [<ffffffff816da719>] system_call_fastpath+0x16/0x1b
      [  608.368010] Code: ec 48 83 c4 10 5b 41 5c 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 48 89 5d f0 <48> 8b 47 28 48 81 78 58 d1 1c 00 00 74 0b 48 8b 05 4b 66 cf 00
      [  608.368010] RIP  [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
      [  608.368010]  RSP <ffff88007ae41a88>
      [  608.368010] CR2: 0000000000000028
      [  608.394153] ---[ end trace afe83b0fb5fbda93 ]---
      Reported-by: default avatarIlya Zykov <ilya@ilyx.ru>
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7acf6cd8
    • Greg Kroah-Hartman's avatar
      kgdb: remove #include <linux/serial_8250.h> from kgdb.h · 16559ae4
      Greg Kroah-Hartman authored
      There's no reason kgdb.h itself needs to include the 8250 serial port
      header file.  So push it down to the _very_ limited number of individual
      drivers that need the values in that file, and fix up the places where
      people really wanted serial_core.h and platform_device.h.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      16559ae4
    • Michael Chan's avatar
      serial_core: Fix type definition for PORT_BRCM_TRUMANAGE. · 85f02440
      Michael Chan authored
      It was mistakenly defined to be 24 instead of the next higher number 25.
      Reported-by: default avatarAlexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Stephen Hurd <shurd@broadcom.com>
      Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
      Cc: stable <stable@vger.kernel.org>  # 3.8
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      85f02440
    • Ivo Sieben's avatar
      tty: Use raw spin lock to protect the TTY read section · 98001214
      Ivo Sieben authored
      The "normal" spin lock that guards the N_TTY line discipline read section
      is replaced by a raw spin lock.
      
      On a PREEMP_RT system this prevents unwanted scheduling overhead when data is
      read at the same time as data is being received: while RX IRQ threaded handling
      is busy a TTY read call is performed from a RT priority > threaded IRQ priority.
      The read call tries to take the read section spin lock (held by the threaded
      IRQ) which blocks and causes a context switch to/from the threaded IRQ handler
      until the spin lock is unlocked.
      Signed-off-by: default avatarIvo Sieben <meltedpianoman@gmail.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      98001214
    • Oleg Nesterov's avatar
      tty: set_termios/set_termiox should not return -EINTR · 183d95cd
      Oleg Nesterov authored
      See https://bugzilla.redhat.com/show_bug.cgi?id=904907
      read command causes bash to abort with double free or corruption (out).
      
      A simple test-case from Roman:
      
      	// Compile the reproducer and send sigchld ti that process.
      	// EINTR occurs even if SA_RESTART flag is set.
      
      	void handler(int sig)
      	{
      	}
      
      	main()
      	{
      	  struct sigaction act;
      	  act.sa_handler = handler;
      	  act.sa_flags = SA_RESTART;
      	  sigaction (SIGCHLD, &act, 0);
      	  struct termio ttp;
      	  ioctl(0, TCGETA, &ttp);
      	  while(1)
      	  {
      	    if (ioctl(0, TCSETAW, ttp) < 0)
      	      {
      		if (errno == EINTR)
      		{
      		  fprintf(stderr, "BUG!"); return(1);
      		}
      	      }
      	  }
      	}
      
      Change set_termios/set_termiox to return -ERESTARTSYS to fix this
      particular problem.
      
      I didn't dare to change other EINTR's in drivers/tty/, but they look
      equally wrong.
      Reported-by: default avatarRoman Rakus <rrakus@redhat.com>
      Reported-by: default avatarLingzhu Xiang <lxiang@redhat.com>
      Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Jiri Slaby <jslaby@suse.cz>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      183d95cd
  4. 30 Jan, 2013 5 commits
    • Dirkjan Bussink's avatar
      tty: Prevent deadlock in n_gsm driver · 4d9b1090
      Dirkjan Bussink authored
      This change fixes a deadlock when the multiplexer is closed while there
      are still client side ports open.
      
      When the multiplexer is closed and there are active tty's it tries to
      close them with tty_vhangup. This has a problem though, because
      tty_vhangup needs the tty_lock. This patch changes it to unlock the
      tty_lock before attempting the hangup and relocks afterwards. The
      additional call to tty_port_tty_set is needed because otherwise the
      port stays active because of the reference counter.
      
      This change also exposed another problem that other code paths don't
      expect that the multiplexer could have been closed. This patch also adds
      checks for these cases in the gsmtty_ class of function that could be
      called.
      
      The documentation explicitly states that "first close all virtual ports
      before closing the physical port" but we've found this to not always
      reality in our field situations. The GPRS / UTMS modem sometimes crashes
      and needs a power cycle in that case which means cleanly shutting down
      everything is not always possible. This change makes it much more robust
      for our situation where at least the system is recoverable with this patch
      and doesn't hang in a deadlock situation inside the kernel.
      
      The patch is against the long term support kernel (3.4.27) and should
      apply cleanly to more recent branches. Tested with a Telit GE864-QUADV2
      and Telit HE910 modem.
      Signed-off-by: default avatarDirkjan Bussink <dirkjan.bussink@nedap.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4d9b1090
    • John Crispin's avatar
      serial: ralink: adds support for the serial core found on ralink wisoc · c420811f
      John Crispin authored
      The MIPS based Ralink WiSoC platform has 1 or more 8250 compatible serial cores.
      To make them work we require the same quirks that are used by AU1x00.
      Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c420811f
    • Joe Perches's avatar
      TTY: synclink: Convert + to | for bit operations · 9fe8074b
      Joe Perches authored
      Dan Carpenter noticed a missing set of parentheses
      around a multiple field addition.
      
      https://lkml.org/lkml/2013/1/27/166
      
      His original commit message:
      
      There is a kind of precedence problem here, but it doesn't affect how
      the code works because ->serial_signals is unsigned char.  We want to
      clear two flags here.
      
      #define SerialSignal_RTS            0x20     /* Request to Send */
      #define SerialSignal_DTR            0x80     /* Data Terminal Ready */
      
      Without the parenthesis then it does:
      
      	info->serial_signals &= 0x5f;
      
      With the parenthesis it does:
      
      	info->serial_signals &= 0xffffff5f;
      
      info->serial_signals is an unsigned char so the two statements are
      equivalent, but it's cleaner to add the parenthesis.  In other dtr_rts()
      functions the parenthesis are there so this makes it more consistent.
      
      Other changes:
      
      Convert all + uses to | for these bit operations.
      
      Reorder the multiple fields for consistency.
      Update the comments too.
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9fe8074b
    • Stephen Chivers's avatar
      serial/8250: Add suport for later SUNIX (TIMEDIA) boards. · abd7baca
      Stephen Chivers authored
      Add support for later SUNIX (TIMEDIA) Universal PCI Single and Multi-Port
      Communications Boards.
      
      These boards have PCI Vendor ID 1fd4 with device ID 1999 but otherwise
      appear to be the same as the TIMEDIA boards already supported by 8250_pci
      and parport_serial.
      
      Tested with:
      
      	a. the two port serial board part number SER5037A,
      	b. the two port serial and one port parallel board part number
      	   MIO5079A.
      Signed-off-by: default avatarStephen Chivers <schivers@csc.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      abd7baca
    • Greg Kroah-Hartman's avatar
      Revert "n_tty: Unthrottle tty when flushing read buffer" · 1651d0a9
      Greg Kroah-Hartman authored
      This reverts commit 58f82be3.
      
      This was fixed by a previous patch already.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1651d0a9
  5. 25 Jan, 2013 10 commits
  6. 24 Jan, 2013 9 commits
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm · 01acd3ef
      Linus Torvalds authored
      Pull ARM fixes from Russell King:
       "A number of fixes:
      
        Patrik found a problem with preempt counting in the VFP assembly
        functions which can cause the preempt count to be upset.
      
        Nicolas fixed a problem with the parsing of the DT when it straddles a
        1MB boundary.
      
        Subhash Jadavani reported a problem with sparsemem and our highmem
        support for cache maintanence for DMA areas, and TI found a bug in
        their strongly ordered memory mapping type.
      
        Also, three fixes by way of Will Deacon's tree from Dave Martin for
        instruction compatibility and Marc Zyngier to fix hypervisor boot mode
        issues."
      
      * 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
        ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO
        ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem
        ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area
        ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone
        ARM: virt: simplify __hyp_stub_install epilog
        ARM: virt: boot secondary CPUs through the right entry point
        ARM: virt: Avoid bx instruction for compatibility with <=ARMv4
      01acd3ef
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 1496ec13
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "Here's a long-pending fixes pull request for arm-soc (I didn't send
        one in the -rc4 cycle).
      
        The larger deltas are from:
      
         - A fixup of error paths in the mvsdio driver
      
         - Header file move for a driver that hadn't been properly converted
           to multiplatform on i.MX, which was causing build failures when
           included
      
         - Device tree updates for at91 dealing mostly with their new pinctrl
           setup merged in 3.8 and mistakes in those initial configs
      
        The rest are the normal mix of small fixes all over the place; sunxi,
        omap, imx, mvebu, etc, etc."
      
      * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
        mfd: vexpress-sysreg: Don't skip initialization on probe
        ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree
        ARM: vexpress: extend the MPIDR range used for pen release check
        ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii
        ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig
        ARM: at91/at91_dt_defconfig: remove memory specification to cmdline
        ARM: at91/dts: add macb mii pinctrl config for kizbox
        ARM: at91: rm9200: remake the BGA as default version
        ARM: at91: fix gpios on i2c-gpio for RM9200 DT
        ARM: at91/at91sam9x5 DTS: add SCK USART pins
        ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts
        ARM: at91/at91-pinctrl documentation: fix typo and add some details
        ARM: kirkwood: fix missing #interrupt-cells property
        mmc: mvsdio: use devm_ API to simplify/correct error paths.
        clk: mvebu/clk-cpu.c: fix memory leakage
        ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport
        ARM: OMAP2+: DT node Timer iteration fix
        ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()
        ARM: OMAP2+: fix build break for omapdrm
        ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls
        ...
      1496ec13
    • Linus Torvalds's avatar
      Merge tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · ba2ab41f
      Linus Torvalds authored
      Pull ACPI and power management fixes from Rafael Wysocki:
      
       - Two cpuidle initialization fixes from Konrad Rzeszutek Wilk.
      
       - cpufreq regression fixes for AMD processors from Borislav Petkov,
         Stefan Bader, and Matthew Garrett.
      
       - ACPI cpufreq fix from Thomas Schlichter.
      
       - cpufreq and devfreq fixes related to incorrect usage of operating
         performance points (OPP) framework and RCU from Nishanth Menon.
      
       - APEI workaround for incorrect BIOS information from Lans Zhang.
      
      * tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        cpufreq: Add module aliases for acpi-cpufreq
        ACPI: Check MSR valid bit before using P-state frequencies
        PM / devfreq: exynos4_bus: honor RCU lock usage
        PM / devfreq: add locking documentation for recommended_opp
        cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP
        cpufreq: OMAP: use RCU locks around usage of OPP
        ACPI, APEI: Fixup incorrect 64-bit access width firmware bug
        ACPI / processor: Get power info before updating the C-states
        powernow-k8: Add a kconfig dependency on acpi-cpufreq
        ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled
        intel_idle: Don't register CPU notifier if we are not running.
      ba2ab41f
    • Linus Torvalds's avatar
      Merge tag 'regmap-fix-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap · bff92411
      Linus Torvalds authored
      Pull regmap fixes from Mark Brown:
       "One more oversight in the debugfs code was reported and fixed, plus a
        documentation fix."
      
      * tag 'regmap-fix-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
        regmap: fix small typo in regmap_bulk_write comment
        regmap: debugfs: Fix seeking from the cache
      bff92411
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma · 3f58e094
      Linus Torvalds authored
      Pull slave-dmaengine fixes from Vinod Koul:
       "A few fixes on slave dmanengine.  There are trivial fixes in imx-dma,
        tegra-dma & ioat driver"
      
      * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
        dma: tegra: implement flags parameters for cyclic transfer
        dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers.
        ioat: Fix DMA memory sync direction correct flag
      3f58e094
    • Linus Torvalds's avatar
      Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux · acc5da0f
      Linus Torvalds authored
      Pill i2c fixes from Wolfram Sang:
       "Here are a few, typical driver fixes for the I2C subsystem"
      
      * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
        i2c-designware: add missing MODULE_LICENSE
        i2c: omap: fix draining irq handling
        i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt
        i2c: muxes: fix wrong use of sizeof(ptr)
        i2c: sirf: register i2c_client from dt child-nodes in probe entry
        i2c: mxs: Fix type of error code
        i2c: mxs: Fix misuse init_completion
      acc5da0f
    • Miao Xie's avatar
      Btrfs: fix repeated delalloc work allocation · 1eafa6c7
      Miao Xie authored
      btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the
      first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/
      btrfs_queue_worker for this inode, and then it locks the list, checks the
      head of the list again. But because we don't delete the first inode that it
      deals with before, it will fetch the same inode. As a result, this function
      allocates a huge amount of btrfs_delalloc_work structures, and OOM happens.
      
      Fix this problem by splice this delalloc list.
      Reported-by: default avatarAlex Lyakas <alex.btrfs@zadarastorage.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
      1eafa6c7
    • Miao Xie's avatar
      Btrfs: fix wrong max device number for single profile · c9f01bfe
      Miao Xie authored
      The max device number of single profile is 1, not 0 (0 means 'as many as
      possible'). Fix it.
      
      Cc: Liu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
      c9f01bfe
    • Miao Xie's avatar
      Btrfs: fix missed transaction->aborted check · 2cba30f1
      Miao Xie authored
      First, though the current transaction->aborted check can stop the commit early
      and avoid unnecessary operations, it is too early, and some transaction handles
      don't end, those handles may set transaction->aborted after the check.
      
      Second, when we commit the transaction, we will wake up some worker threads to
      flush the space cache and inode cache. Those threads also allocate some transaction
      handles and may set transaction->aborted if some serious error happens.
      
      So we need more check for ->aborted when committing the transaction. Fix it.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
      2cba30f1