- 01 Jul, 2015 32 commits
-
-
Thiébaud Weksteen authored
Signed-off-by:
Thiébaud Weksteen <thiebaud@weksteen.fr> Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thiébaud Weksteen authored
Signed-off-by:
-
Thiébaud Weksteen authored
Signed-off-by:
-
Jan Kiszka authored
Signed-off-by:
-
Jan Kiszka authored
This makes the usage more flexible. Signed-off-by:
-
Thiébaud Weksteen authored
Add a gdb script to verify the consistency of lists. Signed-off-by:
-
Quentin Lambert authored
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by:
Quentin Lambert <lambert.quentin@gmail.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Fabian Frederick authored
err is only assigned to -EIO. Return that value at the end of fail context. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
bh is initialized unconditionally in affs_remove_link() Signed-off-by:
-
Fabian Frederick authored
bh is initialized unconditionally in affs_add_entry() Signed-off-by:
-
Firo Yang authored
kmem_cache_alloc() returns void*. Signed-off-by:
Firo Yang <firogm@gmail.com> Signed-off-by:
-
Lorenzo Stoakes authored
Fix kernel gcov support for GCC 5.1. Similar to commit a992bf83 ("gcov: add support for GCC 4.9"), this patch takes into account the existence of a new gcov counter (see gcc's gcc/gcov-counter.def.) Firstly, it increments GCOV_COUNTERS (to 10), which makes the data structure struct gcov_info compatible with GCC 5.1. Secondly, a corresponding counter function __gcov_merge_icall_topn (Top N value tracking for indirect calls) is included in base.c with the other gcov counters unused for kernel profiling. Signed-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Yuan Pengfei <coolypf@qq.com> Tested-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by:
-
HATAYAMA Daisuke authored
Commit f06e5153 ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced "crash_kexec_post_notifiers" kernel boot option, which toggles wheather panic() calls crash_kexec() before panic_notifiers and dump kmsg or after. The problem is that the commit overlooks panic_on_oops kernel boot option. If it is enabled, crash_kexec() is called directly without going through panic() in oops path. To fix this issue, this patch adds a check to "crash_kexec_post_notifiers" in the condition of kexec_should_crash(). Also, put a comment in kexec_should_crash() to explain not obvious things on this patch. Signed-off-by:
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by:
Baoquan He <bhe@redhat.com> Tested-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by:
-
HATAYAMA Daisuke authored
For compatibility with the behaviour before the commit f06e5153 ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers"), the 2nd crash_kexec() should be called only if crash_kexec_post_notifiers is enabled. Note that crash_kexec() returns immediately if kdump crash kernel is not loaded, so in this case, this patch makes no functionality change, but the point is to make it explicit, from the caller panic() side, that the 2nd crash_kexec() does nothing. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by:
-
KarimAllah Ahmed authored
Any parameter passed after '--' in the kernel command-line will not be parsed by the kernel at all, instead it will be passed directly to init process. Currently the kernel appends elfcorehdr=<paddr> to the cmdline passed from kexec load, and if this command-line is used to pass parameters to init process this means that 'elfcorehdr' will not be parsed as a kernel parameter at all which will be a problem for vmcore subsystem since it will know nothing about the location of the ELF structure! Prepending 'elfcorehdr' instead of appending it fixes this problem since it ensures that it always comes before '--' and so it's always parsed as a kernel command-line parameter. Even with this patch things can still go wrong if 'CONFIG_CMDLINE' was also used to embedd a command-line to the crash dump kernel and this command-line contains '--' since the current behavior of the kernel is to actually append the boot loader command-line to the embedded command-line. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by:
-
Yann Droneaud authored
seq_open() stores its struct seq_file in file->private_data, thus it must not be modified by user of seq_file. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Yann Droneaud authored
Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. As there's no more use for such feature, as it could be easily replaced by calls to seq_open_private() (see commit 39699037 ("[FS] seq_file: Introduce the seq_open_private()")) and seq_release_private() (see v2.6.0-test3), support for this uncommon feature can be removed from seq_open(). Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.comSigned-off-by: -
Yann Droneaud authored
A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.comSigned-off-by: -
Mel Gorman authored
Waiman Long reported that 24TB machines hit OOM during basic setup when struct page initialisation was deferred. One approach is to initialise memory on demand but it interferes with page allocator paths. This patch creates dedicated threads to initialise memory before basic setup. It then blocks on a rw_semaphore until completion as a wait_queue and counter is overkill. This may be slower to boot but it's simplier overall and also gets rid of a section mangling which existed so kswapd could do the initialisation. [akpm@linux-foundation.org: include rwsem.h, use DECLARE_RWSEM, fix comment, remove unneeded cast] Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Waiman Long <waiman.long@hp.com Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Scott Norton <scott.norton@hp.com> Tested-by:
Daniel J Blueman <daniel@numascale.com> Signed-off-by:
-
Mel Gorman authored
mminit_verify_page_links() is an extremely paranoid check that was introduced when memory initialisation was being heavily reworked. Profiles indicated that up to 10% of parallel memory initialisation was spent on checking this for every page. The cost could be reduced but in practice this check only found problems very early during the initialisation rewrite and has found nothing since. This patch removes an expensive unnecessary check. Signed-off-by:
Nate Zimmer <nzimmer@sgi.com> Tested-by:
Waiman Long <waiman.long@hp.com> Tested-by:
Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mel Gorman authored
During parallel sturct page initialisation, ranges are checked for every PFN unnecessarily which increases boot times. This patch alters when the ranges are checked. Signed-off-by:
-
Mel Gorman authored
Parallel struct page frees pages one at a time. Try free pages as single large pages where possible. Signed-off-by:
-
Mel Gorman authored
Subject says it all. Other architectures may enable on a case-by-case basis after auditing early_pfn_to_nid and testing. Signed-off-by:
-
Mel Gorman authored
Deferred struct page initialisation is using pfn_to_page() on every PFN unnecessarily. This patch minimises the number of lookups and scheduler checks. Signed-off-by:
-
Mel Gorman authored
Only a subset of struct pages are initialised at the moment. When this patch is applied kswapd initialise the remaining struct pages in parallel. This should boot faster by spreading the work to multiple CPUs and initialising data that is local to the CPU. The user-visible effect on large machines is that free memory will appear to rapidly increase early in the lifetime of the system until kswapd reports that all memory is initialised in the kernel log. Once initialised there should be no other user-visibile effects. Signed-off-by:
-
Mel Gorman authored
This patch initalises all low memory struct pages and 2G of the highest zone on each node during memory initialisation if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set. That config option cannot be set but will be available in a later patch. Parallel initialisation of struct page depends on some features from memory hotplug and it is necessary to alter alter section annotations. Signed-off-by:
-
Mel Gorman authored
early_pfn_in_nid() and meminit_pfn_in_nid() are small functions that are unnecessarily visible outside memory initialisation. As well as unnecessary visibility, it's unnecessary function call overhead when initialising pages. This patch moves the helpers inline. [akpm@linux-foundation.org: fix build] [mhocko@suse.cz: fix build] Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Mel Gorman authored
__early_pfn_to_nid() use static variables to cache recent lookups as memblock lookups are very expensive but it assumes that memory initialisation is single-threaded. Parallel initialisation of struct pages will break that assumption so this patch makes __early_pfn_to_nid() SMP-safe by requiring the caller to cache recent search information. early_pfn_to_nid() keeps the same interface but is only safe to use early in boot due to the use of a global static variable. meminit_pfn_in_nid() is an SMP-safe version that callers must maintain their own state for. Signed-off-by:
-
Mel Gorman authored
__free_pages_bootmem prepares a page for release to the buddy allocator and assumes that the struct page is initialised. Parallel initialisation of struct pages defers initialisation and __free_pages_bootmem can be called for struct pages that cannot yet map struct page to PFN. This patch passes PFN to __free_pages_bootmem with no other functional change. Signed-off-by:
-
Nathan Zimmer authored
Currently each page struct is set as reserved upon initialization. This patch leaves the reserved bit clear and only sets the reserved bit when it is known the memory was allocated by the bootmem allocator. This makes it easier to distinguish between uninitialised struct pages and reserved struct pages in later patches. Signed-off-by:
Robin Holt <holt@sgi.com> Signed-off-by:
-
Robin Holt authored
Currently, memmap_init_zone() has all the smarts for initializing a single page. A subset of this is required for parallel page initialisation and so this patch breaks up the monolithic function in preparation. Signed-off-by:
-
Robin Holt authored
Struct page initialisation had been identified as one of the reasons why large machines take a long time to boot. Patches were posted a long time ago to defer initialisation until they were first used. This was rejected on the grounds it should not be necessary to hurt the fast paths. This series reuses much of the work from that time but defers the initialisation of memory to kswapd so that one thread per node initialises memory local to that node. After applying the series and setting the appropriate Kconfig variable I see this in the boot log on a 64G machine [ 7.383764] kswapd 0 initialised deferred memory in 188ms [ 7.404253] kswapd 1 initialised deferred memory in 208ms [ 7.411044] kswapd 3 initialised deferred memory in 216ms [ 7.411551] kswapd 2 initialised deferred memory in 216ms On a 1TB machine, I see [ 8.406511] kswapd 3 initialised deferred memory in 1116ms [ 8.428518] kswapd 1 initialised deferred memory in 1140ms [ 8.435977] kswapd 0 initialised deferred memory in 1148ms [ 8.437416] kswapd 2 initialised deferred memory in 1148ms Once booted the machine appears to work as normal. Boot times were measured from the time shutdown was called until ssh was available again. In the 64G case, the boot time savings are negligible. On the 1TB machine, the savings were 16 seconds. Nate Zimmer said: : On an older 8 TB box with lots and lots of cpus the boot time, as : measure from grub to login prompt, the boot time improved from 1484 : seconds to exactly 1000 seconds. Waiman Long said: : I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From : grub menu to ssh login, the bootup time was 453s before the patch and 265s : after the patch - a saving of 188s (42%). Daniel Blueman said: : On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing : stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with : this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350) : drops this to 1045s. This patch (of 13): As part of initializing struct page's in 2MiB chunks, we noticed that at the end of free_all_bootmem(), there was nothing which had forced the reserved/allocated 4KiB pages to be initialized. This helper function will be used for that expansion. Signed-off-by:
-
- 29 Jun, 2015 6 commits
-
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md updates from Neil Brown: "A mixed bag - a few bug fixes - some performance improvement that decrease lock contention - some clean-up Nothing major" * tag 'md/4.2' of git://neil.brown.name/md: md: clear Blocked flag on failed devices when array is read-only. md: unlock mddev_lock on an error path. md: clear mddev->private when it has been freed. md: fix a build warning md/raid5: ignore released_stripes check md/raid5: per hash value and exclusive wait_for_stripe md/raid5: split wait_for_stripe and introduce wait_for_quiescent wait: introduce wait_event_exclusive_cmd md: convert to kstrto*() md/raid10: make sync_request_write() call bio_copy_data()
-
Christoph Lameter authored
This patch restores the slab creation sequence that was broken by commit 4066c33d and also reverts the portions that introduced the KMALLOC_LOOP_XXX macros. Those can never really work since the slab creation is much more complex than just going from a minimum to a maximum number. The latest upstream kernel boots cleanly on my machine with a 64 bit x86 configuration under KVM using either SLAB or SLUB. Fixes: 4066c33d ("support the slub_debug boot option") Reported-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm subsystem from Dan Williams: "The libnvdimm sub-system introduces, in addition to the libnvdimm-core, 4 drivers / enabling modules: NFIT: Instantiates an "nvdimm bus" with the core and registers memory devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface table). After registering NVDIMMs the NFIT driver then registers "region" devices. A libnvdimm-region defines an access mode and the boundaries of persistent memory media. A region may span multiple NVDIMMs that are interleaved by the hardware memory controller. In turn, a libnvdimm-region can be carved into a "namespace" device and bound to the PMEM or BLK driver which will attach a Linux block device (disk) interface to the memory. PMEM: Initially merged in v4.1 this driver for contiguous spans of persistent memory address ranges is re-worked to drive PMEM-namespaces emitted by the libnvdimm-core. In this update the PMEM driver, on x86, gains the ability to assert that writes to persistent memory have been flushed all the way through the caches and buffers in the platform to persistent media. See memcpy_to_pmem() and wmb_pmem(). BLK: This new driver enables access to persistent memory media through "Block Data Windows" as defined by the NFIT. The primary difference of this driver to PMEM is that only a small window of persistent memory is mapped into system address space at any given point in time. Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access different portions of the media. BLK-mode, by definition, does not support DAX. BTT: This is a library, optionally consumed by either PMEM or BLK, that converts a byte-accessible namespace into a disk with atomic sector update semantics (prevents sector tearing on crash or power loss). The sinister aspect of sector tearing is that most applications do not know they have a atomic sector dependency. At least today's disk's rarely ever tear sectors and if they do one almost certainly gets a CRC error on access. NVDIMMs will always tear and always silently. Until an application is audited to be robust in the presence of sector-tearing the usage of BTT is recommended. Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig, Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox, Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael Wysocki, and Bob Moore" * tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits) arch, x86: pmem api for ensuring durability of persistent memory updates libnvdimm: Add sysfs numa_node to NVDIMM devices libnvdimm: Set numa_node to NVDIMM devices acpi: Add acpi_map_pxm_to_online_node() libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only pmem: flag pmem block devices as non-rotational libnvdimm: enable iostat pmem: make_request cleanups libnvdimm, pmem: fix up max_hw_sectors libnvdimm, blk: add support for blk integrity libnvdimm, btt: add support for blk integrity fs/block_dev.c: skip rw_page if bdev has integrity libnvdimm: Non-Volatile Devices tools/testing/nvdimm: libnvdimm unit test infrastructure libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory nd_btt: atomic sector updates libnvdimm: infrastructure for btt devices libnvdimm: write blk label set libnvdimm: write pmem label set libnvdimm: blk labels and namespace instantiation ... -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "This time we have support for few new devices, few new features and odd fixes spread thru the subsystem. New devices added: - support for CSRatlas7 dma controller - Allwinner H3(sun8i) controller - TI DMA crossbar driver on DRA7x - new pxa driver New features added: - memset support is bought back now that we have a user in xdmac controller - interleaved transfers support different source and destination strides - supporting DMA routers and configuration thru DT - support for reusing descriptors - xdmac memset and interleaved transfer support - hdmac support for interleaved transfers - omap-dma support for memcpy Others: - Constify platform_device_id - mv_xor fixes and improvements" * tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: xgene: fix file permission dmaengine: fsl-edma: clear pending interrupts on initialization dmaengine: xdmac: Add memset support Documentation: dmaengine: document DMA_CTRL_ACK dmaengine: virt-dma: don't always free descriptor upon completion dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations" dmaengine: hdmac: Implement interleaved transfers dmaengine: Move icg helpers to global header dmaengine: mv_xor: improve descriptors list handling and reduce locking dmaengine: mv_xor: Enlarge descriptor pool size dmaengine: mv_xor: add support for a38x command in descriptor mode dmaengine: mv_xor: Rename function for consistent naming dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup dmaengine: pl330: fix wording in mcbufsz message dmaengine: sirf: add CSRatlas7 SoC support dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings dmaengine: fix kernel-doc documentation dmaengine: pxa_dma: add support for legacy transition dmaengine: pxa_dma: add debug information dmaengine: pxa: add pxa dmaengine driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 updates from Tony Luck: "Pair of ia64 cleanups" * tag 'please-pull-misc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: Use setup_timer ia64: export flush_icache_range for module use
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "This update adds two new test suites: futex and seccomp. In addition, it includes fixes for bugs in timers, other tests, and compile framework. It introduces new quicktest feature to enable users to choose to run tests that complete in a short time" * tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: add quicktest support selftests: add seccomp suite selftest, x86: fix incorrect comment tools selftests: Fix 'clean' target with make 3.81 selftests/futex: Add .gitignore kselftest: Add exit code defines selftests: Add futex tests to the top-level Makefile selftests/futex: Increment ksft pass and fail counters selftests/futex: Update Makefile to use lib.mk selftests: Add futex functional tests kselftests: timers: Check _ALARM clockids are supported before suspending kselftests: timers: Ease alarmtimer-suspend unreasonable latency value kselftests: timers: Increase delay between suspends in alarmtimer-suspend selftests/exec: do not install subdir as it is already created selftests/ftrace: install test.d selftests: copy TEST_DIRS to INSTALL_PATH Test compaction of mlocked memory selftests/mount: output WARN messages when mount test skipped selftests/timers: Make git ignore all binaries in timers test suite
-
- 28 Jun, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu updates from Greg Ungerer: "Only a couple of small changes. Improved the m68knommu MAINTAINERS entry to make it clearer which m68k parts this applies to, and a print format clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: improve m68knommu MAINTAINERS entry m68k: Use vsprintf %pM extension
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: - remove hppfs ("HonePot ProcFS") - initial support for musl libc - uaccess cleanup - random cleanups and bug fixes all over the place * 'for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (21 commits) um: Don't pollute kernel namespace with uapi um: Include sys/types.h for makedev(), major(), minor() um: Do not use stdin and stdout identifiers for struct members um: Do not use __ptr_t type for stack_t's .ss pointer um: Fix mconsole dependency um: Handle tracehook_report_syscall_entry() result um: Remove copy&paste code from init.h um: Stop abusing __KERNEL__ um: Catch unprotected user memory access um: Fix warning in setup_signal_stack_si() um: Rework uaccess code um: Add uaccess.h to ldt.c um: Add uaccess.h to syscalls_64.c um: Add asm/elf.h to vma.c um: Cleanup mem_32/64.c headers um: Remove hppfs um: Move syscall() declaration into os.h um: kernel: ksyms: Export symbol syscall() for fixing modpost issue um/os-Linux: Use char[] for syscall_stub declarations um: Use char[] for linker script address declarations ...
-
