Skip to content

L
linux
Switch branch/tag
  1. 26 Sep, 2024 6 commits
    • 谢致邦 (XIE Zhibang)'s avatar
      docs: tproxy: ignore non-transparent sockets in iptables · aa758763
      谢致邦 (XIE Zhibang) authored 
      The iptables example was added in commit d2f26037 (netfilter: Add
documentation for tproxy, 2008-10-08), but xt_socket 'transparent'
option was added in commit a31e1ffd (netfilter: xt_socket: added new
revision of the 'socket' match supporting flags, 2009-06-09).

Now add the 'transparent' option to the iptables example to ignore
non-transparent sockets, which is also consistent with the nft example.
Signed-off-by: default avatar谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      aa758763
    • Andy Shevchenko's avatar
      netfilter: ctnetlink: Guard possible unused functions · 2cadd3b1
      Andy Shevchenko authored 
      Some of the functions may be unused (CONFIG_NETFILTER_NETLINK_GLUE_CT=n
and CONFIG_NF_CONNTRACK_EVENTS=n), it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:

net/netfilter/nf_conntrack_netlink.c:657:22: error: unused function 'ctnetlink_acct_size' [-Werror,-Wunused-function]
  657 | static inline size_t ctnetlink_acct_size(const struct nf_conn *ct)
      |                      ^~~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:667:19: error: unused function 'ctnetlink_secctx_size' [-Werror,-Wunused-function]
  667 | static inline int ctnetlink_secctx_size(const struct nf_conn *ct)
      |                   ^~~~~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:683:22: error: unused function 'ctnetlink_timestamp_size' [-Werror,-Wunused-function]
  683 | static inline size_t ctnetlink_timestamp_size(const struct nf_conn *ct)
      |                      ^~~~~~~~~~~~~~~~~~~~~~~~

Fix this by guarding possible unused functions with ifdeffery.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      2cadd3b1
    • Antonio Ojea's avatar
      selftests: netfilter: nft_tproxy.sh: add tcp tests · 7e37e0ea
      Antonio Ojea authored 
      The TPROXY functionality is widely used, however, there are only mptcp
selftests covering this feature.

The selftests represent the most common scenarios and can also be used
as selfdocumentation of the feature.

UDP and TCP testcases are split in different files because of the
different nature of the protocols, specially due to the challenges that
present to reliable test UDP due to the connectionless nature of the
protocol. UDP only covers the scenarios involving the prerouting hook.

The UDP tests are signfinicantly slower than the TCP ones, hence they
use a larger timeout, it takes 20 seconds to run the full UDP suite
on a 48 vCPU Intel(R) Xeon(R) CPU @2.60GHz.
Signed-off-by: default avatarAntonio Ojea <aojea@google.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      7e37e0ea
    • Florian Westphal's avatar
      selftests: netfilter: add reverse-clash resolution test case · a57856c0
      Florian Westphal authored 
      Add test program that is sending UDP packets in both directions
and check that packets arrive without source port modification.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      a57856c0
    • Florian Westphal's avatar
      netfilter: conntrack: add clash resolution for reverse collisions · a4e6a103
      Florian Westphal authored 
      Given existing entry:
ORIGIN: a:b -> c:d
REPLY:  c:d -> a:b

And colliding entry:
ORIGIN: c:d -> a:b
REPLY:  a:b -> c:d

The colliding ct (and the associated skb) get dropped on insert.
Permit this by checking if the colliding entry matches the reply
direction.

Happens when both ends send packets at same time, both requests are picked
up as NEW, rather than NEW for the 'first' and 'ESTABLISHED' for the
second packet.

This is an esoteric condition, as ruleset must permit NEW connections
in either direction and both peers must already have a bidirectional
traffic flow at the time conntrack gets enabled.

Allow the 'reverse' skb to pass and assign the existing (clashing)
entry.

While at it, also drop the extra 'dying' check, this is already
tested earlier by the calling function.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      a4e6a103
    • Florian Westphal's avatar
      netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash · d8f84a9b
      Florian Westphal authored 
      A conntrack entry can be inserted to the connection tracking table if there
is no existing entry with an identical tuple in either direction.

Example:
INITIATOR -> NAT/PAT -> RESPONDER

Initiator passes through NAT/PAT ("us") and SNAT is done (saddr rewrite).
Then, later, NAT/PAT machine itself also wants to connect to RESPONDER.

This will not work if the SNAT done earlier has same IP:PORT source pair.

Conntrack table has:
ORIGINAL: $IP_INITATOR:$SPORT -> $IP_RESPONDER:$DPORT
REPLY:    $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT

and new locally originating connection wants:
ORIGINAL: $IP_NAT:$SPORT -> $IP_RESPONDER:$DPORT
REPLY:    $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT

This is handled by the NAT engine which will do a source port reallocation
for the locally originating connection that is colliding with an existing
tuple by attempting a source port rewrite.

This is done even if this new connection attempt did not go through a
masquerade/snat rule.

There is a rare race condition with connection-less protocols like UDP,
where we do the port reallocation even though its not needed.

This happens when new packets from the same, pre-existing flow are received
in both directions at the exact same time on different CPUs after the
conntrack table was flushed (or conntrack becomes active for first time).

With strict ordering/single cpu, the first packet creates new ct entry and
second packet is resolved as established reply packet.

With parallel processing, both packets are picked up as new and both get
their own ct entry.

In this case, the 'reply' packet (picked up as ORIGINAL) can be mangled by
NAT engine because a port collision is detected.

This change isn't enough to prevent a packet drop later during
nf_conntrack_confirm(), the existing clash resolution strategy will not
detect such reverse clash case.  This is resolved by a followup patch.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      d8f84a9b
  3. 16 Sep, 2024 1 commit
    • Linus Torvalds's avatar
      Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next · 94106455
      Linus Torvalds authored 
      Pull networking updates from Jakub Kicinski:
 "The zero-copy changes are relatively significant, but regression risk
  should be contained. The feature needs to be used to cause trouble.

  Also it feels like we got an order of magnitude more semi-automated
  "refactoring" chaff than usual, I wonder if it's just us.

  Core & protocols:

   - Support Device Memory TCP, ability to zero-copy receive TCP
     payloads to a DMABUF region of memory while packet headers land
     separately in normal kernel buffers, and TCP processes then as
     usual.

   - The ability to read the PTP PHC (Physical Hardware Clock) alongside
     MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
     only CLOCK_REALTIME was supported.

   - Allow matching on all bits of IP DSCP for routing decisions.
     Previously we only supported on matching TOS bits in IPv4 which is
     a narrower interpretation of the same header field.

   - Increase the range of weights used for multi-path routing from
     8 bits to 16 bits.

   - Add support for IPv6 PIO p flag in the Prefix Information Option
     per draft-ietf-6man-pio-pflag.

   - IPv6 IOAM6 support for new tunsrc encap mode for better
     performance.

   - Detect destinations which blackhole MPTCP traffic and avoid
     initiating MPTCP connections to them for a certain period of time,
     1h by default.

   - Improve IPsec control path performance by removing the inexact
     policies list.

   - AF_VSOCK: add support for SIOCOUTQ ioctl.

   - Add enum for reasons TCP reset was sent for easier tracing.

   - Add SMC ringbufs usage statistics.

  Drivers:

   - Handle netconsole setup failures more gracefully, don't fail
     loading, retain the specified target as disabled.

   - Extend bonding's IPsec offload pass thru capabilities (ESN, stats).

  Filtering:

   - Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
     when long-lived sockets miss a chance to set additional callbacks
     if a sockops program was not attached early in their lifetime.

   - Support using BPF skb helpers in tracepoints.

   - Conntrack Netlink: support CTA_FILTER for flush.

   - Improve SCTP support in nfnetlink_queue.

   - Improve performance of large nftables flush transactions.

  Things we sprinkled into general kernel code:

   - selftests: support setting an "interpreter" for script files; make
     it easy to run as separate cases tests where one "interpreter" is
     fed various test descriptions (in our case packet sequences).

  Driver API:

   - Extend core and ethtool APIs to support many PHYs connected to a
     single interface (PHY topologies).

   - Extend cable diagnostics to specify whether Time Domain
     Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
     used.

   - Add library for implementing MAC-PHY Ethernet drivers for SPI
     devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
     Interface (TC6) standard.

   - Add helpers to the PHY framework, for PHYs following the Open
     Alliance standards:
       - 1000BaseT1 link settings
       - cable test and diagnostics

   - Support listing / dumping all allocated RSS contexts.

   - Add configuration for frequency Embedded SYNC in DPLL, which
     magically embeds sync pulses into Ethernet signaling.

  Device drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - use better FW APIs for queue reset
         - support QOS and TPID settings for the SR-IOV VLAN
         - support dynamic MSI-X allocation
      - Intel (100G, ice, idpf):
         - ice: support PCIe subfunctions
         - iavf: add support for TC U32 filters on VFs
         - ice: support Embedded SYNC in DPLL
      - nVidia/Mellanox (mlx5):
         - support HW managed steering tables
         - support PCIe PTM cross timestamping
      - AMD/Pensando:
         - ionic: use page_pool to increase Rx performance
      - Cisco (enic):
         - report per-queue statistics

   - Ethernet virtual:
      - Microsoft vNIC:
         - mana: support configuring ring length
         - netvsc: enable more channels on systems with many CPUs
      - IBM veth:
         - optimize polling to improve TCP_RR performance
         - optimize performance of Tx handling
      - VirtIO net:
         - synchronize the operstate with the admin state to allow a
           lower virtio-net to propagate the link status to an upper
           device like macvlan

   - Ethernet NICs consumer, and embedded:
      - Add driver for Realtek automotive PCIe devices (RTL9054,
        RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
      - Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
      - Microchip:
         - lan743x: use phylink - support WOL, EEE, pause, link settings
         - add Wake-on-LAN support for KSZ87xx family
         - add KSZ8895/KSZ8864 switch support
         - factor out FDMA code and use it in sparx5 and lan966x
           (including DCB support in both)
      - Synopsys (stmmac):
         - support frame preemption (configured using TC and ethtool)
         - support Loongson DWMAC (GMAC v3.73)
         - support RockChips RK3576 DWMAC
      - TI:
         - am65-cpsw: add multi queue RX support
         - icssg-prueth: HSR offload support
      - Cadence (macb):
         - enable software (hrtimer based) IRQ coalescing by default
      - Xilinx (axinet):
         - expose HW statistics
         - improve multicast filtering
         - relax Rx checksum offload constraints
      - MediaTek:
         - mt7530: add EN7581 support
      - Aspeed (ftgmac100):
         - report link speed and duplex
      - Intel:
         - igc: add mqprio offload
         - igc: report EEE configuration
      - RealTek (r8169):
         - add support for RTL8126A rev.b
      - Vitesse (vsc73xx):
         - implement FDB add/del/dump operations
      - Freescale (fs_enet):
         - use phylink

   - Ethernet PHYs:
      - vitesse: implement downshift and MDI-X in vsc73xx PHYs
      - microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
        and IEEE 802.3bp (1000BASE-T1) specifications
      - add Applied Micro QT2025 PHY driver (in Rust)
      - add Motorcomm yt8821 2.5G Ethernet PHY driver

   - CAN:
      - add driver for Rockchip RK3568 CAN-FD controller
      - flexcan: add wakeup support for imx95
      - kvaser_usb: set hardware timestamp on transmitted packets

   - WiFi:
      - mac80211/cfg80211:
         - EHT rate support in AQL airtime fairness
         - handle DFS (radar detection) per link in Multi-Link Operation
      - RealTek (rtw89):
         - support RTL8852BT and 8852BE-VT (WiFi 6)
         - support hardware rfkill
         - support HW encryption in unicast management frames
         - support Wake-on-WLAN with supported network detection
      - RealTek (rtw89):
         - improve Rx performance by using USB frame aggregation
         - support USB 3 with RTL8822CU/RTL8822BU
      - Intel (iwlwifi/mvm):
         - offload RLC/SMPS functionality to firmware
      - Marvell (mwifiex):
         - add host based MLME to enable WPA3

   - Bluetooth:
      - add support for Amlogic HCI UART protocol
      - add support for ISO data/packets to Intel and NXP drivers"

* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
  net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
  netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
  ice: Fix a NULL vs IS_ERR() check in probe()
  ice: Fix a couple NULL vs IS_ERR() bugs
  net: ethernet: fs_enet: Make the per clock optional
  net: ti: icssg-prueth: Add multicast filtering support in HSR mode
  net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
  net: ti: icssg-prueth: Add support for HSR frame forward offload
  net: ti: icssg-prueth: Stop hardcoding def_inc
  net: ti: icss-iep: Move icss_iep structure
  net: ibm: emac: get rid of wol_irq
  net: ibm: emac: remove all waiting code
  net: ibm: emac: replace of_get_property
  net: ibm: emac: use netdev's phydev directly
  net: ibm: emac: use devm for register_netdev
  net: ibm: emac: remove mii_bus with devm
  net: ibm: emac: use devm for of_iomap
  net: ibm: emac: manage emac_irq with devm
  net: ibm: emac: use devm for alloc_etherdev
  octeontx2-af: debugfs: Add Channel info to RPM map
  ...
      94106455
  5. 15 Sep, 2024 9 commits
  7. 14 Sep, 2024 24 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7