- 28 Jun, 2022 14 commits
-
-
Amit Cohen authored
In the unified bridge model, the bridge type FID attribute is no longer configured by the firmware, but instead by software when creating and editing a FID via SFMR register. Set this field as part of FID creation and edition flow. Default to 0 (reserved) as long as the driver operates in the legacy bridge model. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Amit Cohen authored
Currently, 'bridge_type' is an attribute of 'struct mlxsw_sp_flood_table', which is defined per FID family. Instead, it can be an attribute of 'struct mlxsw_sp_fid_family' as all flood tables in the same family are of the same type. This change will ease the configuration of 'SFMR.flood_bridge_type' which will be added in the next patch. Signed-off-by:
-
Amit Cohen authored
Under the legacy bridge model, the field 'bridge_type' is used only in SFGC register, to determine the type of flood table (FID/FID offset). Under the unified bridge model, it will be used also in SFMR register. When a BUM packet needs to be flooded, SFGC is used to provide the 'mid_base' for PGT table. The access to SFGC is by {packet type, bridge type}. Under the unified bridge model, software is responsible for configuring 'bridge_type' as part of SFMR. As preparation for the new required configuration, rename 'enum mlxsw_reg_sfgc_bridge_type' to 'enum mlxsw_reg_bridge_type'. Then it can be used also in SFMR. In addition, align the names of the values to internal documentation. Signed-off-by: -
Amit Cohen authored
Using unified bridge model, RITR register no longer configures the rFID used for sub-port RIFs. It needs to be created by software via SFMR. Such FIDs need to be created with a special flood indication using 'SFMR.flood_rsp=1'. It means that for such FIDs, router sub-port flooding table will be used, this table is configured by firmware. Set the above mentioned field as part of FID initialization and FID edition, so then when other fields will be updated in SFMR, this field will store the correct value and will not be overwritten. Add 'flood_rsp' variable to 'struct mlxsw_sp_fid_family', set it to true for rFID and to false for the rest. Signed-off-by:
-
Amit Cohen authored
As part of transition to unified bridge model, many different firmware configurations are done. Some of the configuration that needs to be done for the unified bridge model is not valid under the legacy model, and would be rejected by the firmware. At the same time, the driver cannot switch to the unified bridge model until all of the code has been converted. To allow breaking the change into patches, and to not break driver behavior during the transition, add a boolean variable to indicate bridge model. Then, forbidden configurations will be skipped using the check - "if (!mlxsw_sp->ubridge)". The new variable is temporary for several sets, it will be removed when firmware will be configured to work with unified bridge model. Signed-off-by:
-
Sam Edwards authored
The addrconf_verify_rtnl() function uses a big if/elseif/elseif/... block to categorize each address by what type of attention it needs. An about-to-expire (RFC 4941) temporary address is one such category, but the previous elseif branch catches addresses that have already run out their prefered_lft. This means that if addrconf_verify_rtnl() fails to run in the necessary time window (i.e. REGEN_ADVANCE time units before the end of the prefered_lft), the temporary address will never be regenerated, and no temporary addresses will be available until each one's valid_lft runs out and manage_tempaddrs() begins anew. Fix this by moving the entire temporary address regeneration case out of that block. That block is supposed to implement the "destructive" part of an address's lifecycle, and regenerating a fresh temporary address is not, semantically speaking, actually tied to any particular lifecycle stage. The age test is also changed from `age >= prefered_lft - regen_advance` to `age + regen_advance >= prefered_lft` instead, to ensure no underflow occurs if the system administrator increases the regen_advance to a value greater than the already-set prefered_lft. Note that this does not fix the problem of addrconf_verify_rtnl() sometimes not running in time, resulting in the race condition described in RFC 4941 section 3.4 - it only ensures that the address is regenerated. Fixing THAT problem may require either using jiffies instead of seconds for all time arithmetic here, or always rounding up when regen_advance is converted to seconds. Signed-off-by:
Sam Edwards <CFSworks@gmail.com> Link: https://lore.kernel.org/r/20220623181103.7033-1-CFSworks@gmail.comSigned-off-by:
-
Christophe JAILLET authored
'vlan_bitmap' is a bitmap and is used as such. So allocate it with devm_bitmap_zalloc() and its explicit bit size (i.e. VLAN_N_VID). This avoids the need of the VLAN_BITMAP_SIZE macro which: - needlessly has a 'nic_dev' parameter - should be "long" (and not byte) aligned, so that the bitmap semantic is respected This is in fact not an issue because VLAN_N_VID is 4096 at the time being, but devm_bitmap_zalloc() is less verbose and easier to understand. Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/6ff7b7d21414240794a77dc2456914412718a145.1656260842.git.christophe.jaillet@wanadoo.frSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: add VEPA and adapter selftest support 1. Support for ethtool -t: adapter selftest 2. VEPA mode in HW bridge. This supplements existing support for VEB mode. ==================== Link: https://lore.kernel.org/r/20220624073816.1272984-1-simon.horman@corigine.comSigned-off-by:
-
Fei Qin authored
Add support for ethtool selftest. e.g. # ethtool -t DEVNAME test result like: The test result is PASS The test extra info: Link Test 0 NSP Test 0 Firmware Test 0 Register Test 0 Signed-off-by:
Fei Qin <fei.qin@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Yinjun Zhang authored
Add support for VEPA mode of HW bridge. The default remains VEB mode. The mode may be configured using ndo_bridge_setlink, and inspected using ndo_bridge_getlink. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220625071558.3852-1-yuanjilin@cdjrlc.comSigned-off-by:
-
Jilin Yuan authored
Delete the redundant word 'use'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by:
-
Deming Wang authored
Delete duplicate words of "the". Signed-off-by:
Deming Wang <wangdeming@inspur.com> Link: https://lore.kernel.org/r/20220624013114.1913-1-wangdeming@inspur.comSigned-off-by:
-
- 27 Jun, 2022 22 commits
-
-
Eric Dumazet authored
vif_dev_read() should be used from RCU protected sections only. ipmr_rtm_dumplink() is holding RTNL, so the data structures can not be changed. syzbot reported: net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor.4/3068: stack backtrace: CPU: 1 PID: 3068 Comm: syz-executor.4 Not tainted 5.19.0-rc3-syzkaller-00565-g5d04b0b6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 vif_dev_read net/ipv4/ipmr.c:84 [inline] vif_dev_read net/ipv4/ipmr.c:82 [inline] ipmr_fill_vif net/ipv4/ipmr.c:2756 [inline] ipmr_rtm_dumplink+0x1343/0x18c0 net/ipv4/ipmr.c:2866 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x334/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmmsg+0x195/0x470 net/socket.c:2629 __do_sys_sendmmsg net/socket.c:2658 [inline] __se_sys_sendmmsg net/socket.c:2655 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2655 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fefd8a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fefd9ca6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007fefd8b9bf60 RCX: 00007fefd8a89109 RDX: 0000000004924b68 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00007fefd8ae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc346febaf R14: 00007fefd9ca6300 R15: 0000000000022000 </TASK> Fixes: ebc31979 ("ipmr: add rcu protection over (struct vif_device)->dev") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jilin Yuan authored
Delete the redundant word 'in'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'set'. Delete the redundant word 'a'. Delete the redundant word 'in'. Found the same error as before. Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
The following commits added support for printing the real address- 65875073 ("net: use %px to print skb address in trace_netif_receive_skb") 70713ddd ("net_sched: introduce tracepoint trace_qdisc_enqueue()") 851f36e4 ("net_sched: use %px to print skb address in trace_qdisc_dequeue()") However, tracing the packet traversal shows a mix of hashes and real addresses. Pasting a sample trace for reference- ping-14249 [002] ..... 3424.046612: netif_rx_entry: dev=lo napi_id=0x3 queue_mapping=0 skbaddr=00000000dcbed83e vlan_tagged=0 vlan_proto=0x0000 vlan_tci=0x0000 protocol=0x0800 ip_summed=0 hash=0x00000000 l4_hash=0 len=84 data_len=0 truesize=768 mac_header_valid=1 mac_header=-14 nr_frags=0 gso_size=0 gso_type=0x0 ping-14249 [002] ..... 3424.046615: netif_rx: dev=lo skbaddr=ffffff888e5d1000 len=84 Switch the trace print formats to %p for all the events to have a consistent format of printing the hashed addresses in all cases. Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.20-20220625' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-06-25 this is a pull request of 22 patches for net-next/master. The first 2 patches target the xilinx driver. Srinivas Neeli's patch adds Transmitter Delay Compensation (TDC) support, a patch by me fixes a typo. The next patch is by me and fixes a typo in the m_can driver. Another patch by me allows the configuration of fixed bit rates without need for do_set_bittiming callback. The following 7 patches are by Vincent Mailhol and refactor the can-dev module and Kbuild, de-inline the can_dropped_invalid_skb() function, which has grown over the time, and drop outgoing skbs if the controller is in listen only mode. Max Staudt's patch fixes a reference in the networking/can.rst documentation. Vincent Mailhol provides 2 patches with cleanups for the etas_es58x driver. Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi. Another patch by me allows the configuration of fixed data bit rates without need for do_set_data_bittiming callback. The last 5 patches are by Frank Jungclaus. They prepare the esd_usb driver to add support for the the CAN-USB/3 device in a later series. ==================== Signed-off-by:
-
David S. Miller authored
Clément Léger says: ==================== net: add support for Renesas RZ/N1 ethernet su The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter. The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC. The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support. Link: [1] https://www.renesas.com/us/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals ----- Changes in V9: - Cover letter: - Remove comment about RZN1 patches that are now in the master branch. - Commits: - Add Vladimir Oltean Reviewed-by - PCS: - Add "Depends on OF" for PCS_RZN1_MIIC due to error found by intel kernel test robot <lkp@intel.com>. - Check return value of of_property_read_u32() for "renesas,miic-switch-portin" property before setting conf. - Return miic_parse_dt() return value in miic_probe() on error - Switch: - Add "Depends on OF" for NET_DSA_RZN1_A5PSW due to errors found by intel kernel test robot <lkp@intel.com>. - DT: - Add spaces between switch port and '{' ==================== Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Clément Léger authored
After contributing the drivers, volunteer for maintenance and add myself as the maintainer for Renesas RZ/N1 switch related drivers. Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Clément Léger authored
Add description for the switch, GMAC2 and MII converter. With these definitions, the switch port 0 and 1 (MII port 5 and 4) are working on RZ/N1D-DB board. Signed-off-by:
-
Clément Léger authored
Add description of the switch that is present on the RZ/N1 SoC. This description includes ethernet-ports description for all the ports that are present on the switch along with their connection to the MII converter ports and to the GMAC for the CPU port. Signed-off-by:
-
Clément Léger authored
RZ/N1 SoC includes two MAC named GMACx that are compatible with the "snps,dwmac" driver. GMAC1 is connected directly to the MII converter port 1. GMAC2 however can be used as the MAC for the switch CPU management port or can be muxed to be connected directly to the MII converter port 2. This commit add description for the GMAC2 which will be used by the switch description. Signed-off-by:
-
Clément Léger authored
Add the MII converter node which describes the MII converter that is present on the RZ/N1 SoC. Signed-off-by:
-
Clément Léger authored
Add "renesas,rzn1-gmac" and "renesas,r9a06g032-gmac" compatible strings. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Clément Léger authored
Since the stmmac driver already uses pm_runtime*() functions, describe "power-domains" property in the binding. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Clément Léger authored
This commits add forwarding database support to the driver. It implements fdb_add(), fdb_del() and fdb_dump(). Signed-off-by:
-
Clément Léger authored
Add statistics support to the rzn1-a5psw driver by implementing the following dsa_switch_ops callbacks: - get_sset_count() - get_strings() - get_ethtool_stats() - get_eth_mac_stats() - get_eth_ctrl_stats() - get_rmon_stats() Signed-off-by:
-
Clément Léger authored
Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5 ports including 1 CPU management port. A MDIO bus is also exposed by this switch and allows to communicate with PHYs connected to the ports. Each switch port (except for the CPU management ports) is connected to the MII converter. This driver includes basic bridging support, more support will be added later (vlan, etc). Suggested-by:
Jean-Pierre Geslin <jean-pierre.geslin@non.se.com> Suggested-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Clément Léger authored
Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP. This company does not exists anymore and has been bought by Synopsys. Since this IP can't be find anymore in the Synospsy portfolio, lets use Renesas as the vendor compatible for this IP. Signed-off-by:
-
Clément Léger authored
Add a PCS driver for the MII converter that is present on the Renesas RZ/N1 SoC. This MII converter is reponsible for converting MII to RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to reuse it in both the switch driver and the stmmac driver. Currently, this driver only allows the PCS to be used by the dual Cortex-A7 subsystem since the register locking system is not used. Signed-off-by:
-
Clément Léger authored
This MII converter can be found on the RZ/N1 processor family. The MII converter ports are declared as subnodes which are then referenced by users of the PCS driver such as the switch. Signed-off-by:
-
Clément Léger authored
The switch that is present on the Renesas RZ/N1 SoC uses a specific VLAN value followed by 6 bytes which contains forwarding configuration. Signed-off-by:
-
Clément Léger authored
Add support to allow dsa drivers to specify the .get_rmon_stats() operation. Signed-off-by:
-
Clément Léger authored
Some drivers might report that they are unable to bridge ports by returning -EOPNOTSUPP, but still wants to override extack message. In order to do so, in dsa_slave_changeupper(), if port_bridge_join() returns -EOPNOTSUPP, check if extack message is set and if so, do not override it. Signed-off-by:
-
- 25 Jun, 2022 4 commits
-
-
Marc Kleine-Budde authored
Frank Jungclaus says: ==================== All following 5 patches must be seen as preparation for adding support of the newly available esd CAN-USB/3 to esd_usb2.c. After having gained some confidence and experience on sending patches to linux-can@vger.kernel.org, I'll again submit the code changes for CAN-USB/3 support as step #2. ==================== Link: https://lore.kernel.org/all/20220624190517.2299701-1-frank.jungclaus@esd.euSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Frank Jungclaus authored
- Brought the copyright notice up to date - Also regarding the changed company name from esd electronic system design gmbh to esd electronics gmbh - Using socketcan@esd.eu as a generic mail address for matthias who left esd 6 years before - Added a second MODULE_AUTHOR() for Frank Jungclaus Link: https://lore.kernel.org/all/20220624190517.2299701-6-frank.jungclaus@esd.euSigned-off-by:
Frank Jungclaus <frank.jungclaus@esd.eu> Signed-off-by:
-
Frank Jungclaus authored
Link: https://lore.kernel.org/all/20220624190517.2299701-5-frank.jungclaus@esd.euSigned-off-by:
-
Frank Jungclaus authored
Each occurrence of the term "usb2" within variables, function names, comments, etc. is changed to "usb" where it is shared for all esd CAN/USB devices. Link: https://lore.kernel.org/all/20220624190517.2299701-4-frank.jungclaus@esd.euSigned-off-by:
-
