- 08 Jan, 2014 3 commits
-
-
Paul Bolle authored
Building mei-amt-version.o triggers a GCC warning: Documentation/misc-devices/mei/mei-amt-version.c: In function 'main': Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] if (cl->fd != -1) ^ Documentation/misc-devices/mei/mei-amt-version.c:443:21: note: 'acmd.fd' was declared here struct amt_host_if acmd; ^ GCC is correct. See, the call chain that GCC detects must be main() amt_host_if_init() mei_init() mei_deinit() But when we enter mei_deinit() struct amt_host_if acmd is still unitialized. That makes the test for (effectively) amt_host_if->mei_cl->fd bogus. But it turns out that call of mei_deinit() isn't needed at all. All of the members of mei_cl will be set later in mei_init() and none will be used before they are set. So we can simply drop this call of mei_deinit(). Signed-off-by:Paul Bolle <pebolle@tiscali.nl> Cc: Tomas Winkler <tomas.winkler@intel.com> Reported-by:
David Howells <dhowells@redhat.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frank Haverkamp authored
Instead of remaining bytes of a failing copy_to_user, the flash-update ioctl is returning now -EFAULT. In addtion Dan discovered user triggerable dev_errs(). Those I removed now from card_dev.c too. Some dev_infos() were deleted and some others turned into dev_dbgs(). Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
interruptible_sleep_on_timeout is deprecated and going away soon. The use in the sgi-xp driver leaves me puzzled, so I'd prefer not to touch it. This patch replaces it with an open-coded prepare_to_wait and finish_wait pair, which should be completely equivalent, so it doesn't fix an existing race, but lets us get away with removing the function so we can not get any new users. In order to remove the typical sleep_on race, one would have to replace the call with wait_event_interruptible_timeout and add a condition to wait for. The fact that there is a one-jiffy timeout suggests that we don't actually expect to get woken up properly and the caller just uses this as a short sleeping function if it doesn't wake up properly. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Cliff Whickman <cpw@sgi.com> Acked-by:
Robin Holt <robinmholt@gmail.com> Signed-off-by:
-
- 20 Dec, 2013 4 commits
-
-
Frank Haverkamp authored
Fix a casting to u32 where u64 would be appropriate. The bad casting made the driver unusable. Signed-off-by:
-
Aaro Koskinen authored
Commit e6789cd3 (uio: Simplify uio error path by using devres functions) converted uio to use devm_request_irq(). This introduced a change in behaviour since the IRQ is associated with the parent device instead of the created UIO device. The IRQ will remain active after uio_unregister_device() is called, and some drivers will crash because of this. The patch fixes this. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by:
-
Frank Haverkamp authored
As requested by Greg, replacing the hexdump function from dynamic_debug.h with one defined in printk.h. I hope I picked the right one. Signed-off-by:
-
Frank Haverkamp authored
Fengguang Wu used CF=-D__CHECK_ENDIAN__ to check the GenWQE driver for endian issues. Sparse found a couple of those. Most of them were caused by not correctly handling __be64/32 and __u64/32. Those I was able to fix with appropriate castings. One more serious issue was the ATS entry in struct genwqe_ddcb_cmd. The kernel expected it in big-endian, but the type was defined __u64. I decided that it is better to keep the interface consistent using host endian byte-odering instead of having a mixture. With this change the kernel likes to see host endian byte order for the ATS entry. That would have been an interface change, if someone would have used the driver already. Since this is not the case, I hope it is ok to fix it now. For the genqwe_readq/writeq/readl/writel functions I enforced the casts. It still complains, as far as I can see, about some copy_to/from_user() usages: CHECK char-misc/drivers/misc/genwqe/card_dev.c char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from CC [M] drivers/misc/genwqe/card_dev.o CHECK char-misc/drivers/misc/genwqe/card_ddcb.c char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers) char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident> char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from CC [M] drivers/misc/genwqe/card_ddcb.o LD [M] drivers/misc/genwqe/genwqe_card.o I appreciate some help from you to figure out what is causig those, and making a proposal how to fix them. I included the missing header file to fix the implicit-function-declaration warning when using dynamic_hex_dump. Signed-off-by:
-
- 19 Dec, 2013 28 commits
-
-
Frank Haverkamp authored
Enable possiblity to configure and build this driver. Signed-off-by:
-
Frank Haverkamp authored
Sysfs interfaces for the GenWQE card. There are attributes to query the version of the bitstream as well as some for the driver. For debugging, please also see the debugfs interfaces of this driver. Signed-off-by:
-
Frank Haverkamp authored
Debugfs interfaces for the GenWQE card. Help to debug potential problems. Dump internal chip state for debugging and failure determination. Signed-off-by:
-
Frank Haverkamp authored
Miscelanous functionality used in the other GenWQE driver parts. Signed-off-by:
-
Frank Haverkamp authored
The GenWQE card itself provides access to a generic work queue into which the work can be put, which should be executed, e.g. compression or decompression request, or whatever the card was configured to do. Each request comes with a set of input data (ASV) and will produce some output data (ASIV). The request will also contain a sequence number, some timestamps and a command code/subcode plus some fields for hardware-/ software-interaction. A request can contain references to blocks of memory. Since the card requires DMA-addresses of that memory, the driver provides two ways to solve that task: 1) The drivers mmap() will allocate some DMAable memory for the user. The driver has a lookup table such that the virtual userspace address can properly be replaced and checked. 2) The user allocates memory and the driver will pin/unpin that memory and setup a scatter gatherlist with matching DMA addresses. Currently work requests are synchronous. Signed-off-by: -
Frank Haverkamp authored
Module initialization and PCIe setup. Card health monitoring and recovery functionality. Character device creation and deletion are controlled from here. Signed-off-by:
-
Guenter Roeck authored
Fan speed can be set to off, slow, and fast, which can be exported to userspace through the hwmon ABI as pwm1 / pwm2. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Guenter Roeck authored
This doesn't work on Studio, XPS, Vostro, and Precision laptops, and it doesn't provide any value except to cause confusion when it does not work. Drop it and always use DMI BIOS version instead. Signed-off-by:
-
Guenter Roeck authored
At least on Studio 1555 and XPS M140, the fan speed is reported directly, not with the default speed multiplier of 30. Information on the web suggests that this may be true for other models as well, though it is unknown at this time which systems may be affected. Use the driver_data field of dmi_system_id to override the default fan multiplier value for the two systems known to use a multiplier of 1. Signed-off-by:
-
Guenter Roeck authored
Signed-off-by:
-
Guenter Roeck authored
Tested with Dell Studio 1555. Signed-off-by:
-
Guenter Roeck authored
I made enough changes to the driver to warrant adding a copyright notice. Signed-off-by:
-
Guenter Roeck authored
On Studio 1555 with dual-core CPU, reading sensor attributes exported by this driver resulted in random failures combined with system hangups and forced logouts. Information in drivers/firmware/dcdbas.c suggests that SMM accesses must run on CPU 0. With this patch, the problems are gone, suggesting that this is in fact the case. Code derived from drivers/firmware/dcdbas.c. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Guenter Roeck authored
The driver version number is long since obsolete, so drop it. Also, drop the info message at driver startup to reduce boot noise. Signed-off-by:
-
Guenter Roeck authored
Accessing the link returns a page not found error. Signed-off-by:
-
Guenter Roeck authored
I have a couple of Dell laptops running Linux, so I have a vested interest to keep this driver supported. Signed-off-by:
-
Guenter Roeck authored
The SMM API suggests that more than one temperature sensor is supported, so add support for them. Currently only supported for hwmon interface. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Guenter Roeck authored
Simplify code and fix race condition caused by registering hwmon device prior to creating sysfs attributes. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Guenter Roeck authored
Fix: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> WARNING: Use #include <linux/io.h> instead of <asm/io.h> WARNING: __packed is preferred over __attribute__((packed)) WARNING: externs should be avoided in .c files ERROR: spaces required around that ':' (ctx:ExV) ERROR: do not use assignment in if condition WARNING: line over 80 characters WARNING: __initdata should be placed after i8k_dmi_table[] ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line Signed-off-by:
-
Guenter Roeck authored
Signed-off-by:
-
Rashika Kheria authored
This patch marks the function hv_synic_free_cpu() as static in hv.c because it is not used outside this file. Thus, it also eliminates the following warning in hv.c: drivers/hv/hv.c:304:6: warning: no previous prototype for ‘hv_synic_free_cpu’ [-Wmissing-prototypes] Signed-off-by:
Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Rashika Kheria authored
This patch marks the function ad_dpot_add_files() and ad_dpot_remove_files() as static in ad525x_dpot.c because they are not used outside this file. Thus, it also eliminates the following warnings in ad525x_dpot.c: drivers/misc/ad525x_dpot.c:644:5: warning: no previous prototype for ‘ad_dpot_add_files’ [-Wmissing-prototypes] drivers/misc/ad525x_dpot.c:669:13: warning: no previous prototype for ‘ad_dpot_remove_files’ [-Wmissing-prototypes] Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Rashika Kheria authored
This patch marks the function jp_generic_ide_ioctl() as static in lkdtm.c because it is not used outside this file. Thus, it also eliminates the following warnings in lkdtm.c: drivers/misc/lkdtm.c:227:5: warning: no previous prototype for ‘jp_generic_ide_ioctl’ [-Wmissing-prototypes] Signed-off-by:
-
Tomas Winkler authored
ME device is 64bit DMA capable We assume both coherent and consistent memory to match Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Set hbm header bit 30 for internal commands This mark commands that are generated by the device driver Signed-off-by:
-
Boris BREZILLON authored
Document the clock properties required by the atmel-ssc driver. Signed-off-by:
Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by:
-
Boris BREZILLON authored
Document the clock properties required by the atmel_tclib driver. Signed-off-by:
-
Yongjian Xu authored
arg comes from user-space, so int overflow may occur: LP_TIME(minor) = arg * HZ/100; Reported-by:
Yongjian Xu <xuyongjiande@gmail.com> Suggested-by:
Qixue Xiao <s2exqx@gmail.com> Signed-off-by:
Yu Chen <chyyuu@gmail.com> Signed-off-by:
-
- 17 Dec, 2013 1 commit
-
-
Greg Kroah-Hartman authored
We want these fixes in here.
-
- 15 Dec, 2013 4 commits
-
-
Linus Torvalds authored
-
Matias Bjorling authored
For NUMA systems, initializing the blk-mq layer and using per node hctx. We initialize submit queues to 1, while blk-mq nr_hw_queues is initialized to the number of NUMA nodes. This makes the null_init_hctx function overwrite memory outside of what it allocated. In my case it lead to writing garbage into struct request_queue's mq_map. Signed-off-by:
Matias Bjorling <m@bjorling.me> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Since commit ec39f64b ("drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups") radeon_hwmon_init() is using hwmon_device_register_with_groups(), which sets `rdev' as a device private driver_data, while hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'. Fix them by using dev_get_drvdata(), in order to avoid this oops: BUG: unable to handle kernel paging request at 0000000000001e28 IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon] PGD 15057e067 PUD 151a8e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Call Trace: internal_create_group+0x114/0x1d9 sysfs_create_group+0xe/0x10 sysfs_create_groups+0x22/0x5f device_add+0x34f/0x501 device_register+0x15/0x18 hwmon_device_register_with_groups+0xb5/0xed radeon_hwmon_init+0x56/0x7c [radeon] radeon_pm_init+0x134/0x7e5 [radeon] radeon_modeset_init+0x75f/0x8ed [radeon] radeon_driver_load_kms+0xc6/0x187 [radeon] drm_dev_register+0xf9/0x1b4 [drm] drm_get_pci_dev+0x98/0x129 [drm] radeon_pci_probe+0xa3/0xac [radeon] pci_device_probe+0x6e/0xcf driver_probe_device+0x98/0x1c4 __driver_attach+0x5c/0x7e bus_for_each_dev+0x7b/0x85 driver_attach+0x19/0x1b bus_add_driver+0x104/0x1ce driver_register+0x89/0xc5 __pci_register_driver+0x58/0x5b drm_pci_init+0x86/0xea [drm] radeon_init+0x97/0x1000 [radeon] do_one_initcall+0x7f/0x117 load_module+0x1583/0x1bb4 SyS_init_module+0xa0/0xaf Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't figure out why it breaks things. 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it was basically doing "x == x", from Dave Jones. 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from Sebastian Siewior. 4) Blackhole and prohibit routes in ipv6 were not doing the right thing because their ->input and ->output methods were not being assigned correctly. Now they behave properly like their ipv4 counterparts. From Kamala R. 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but really do not support this feature and will send garbage packets if fed fraglist SKBs. From Eric Dumazet. 6) Fix long standing user triggerable BUG_ON over loopback in RDS protocol stack, from Venkat Venkatsubra. 7) Several not so common code paths can potentially try to invoke packet scheduler actions that might be NULL without checking. Shore things up by either 1) defining a method as mandatory and erroring on registration if that method is NULL 2) defininig a method as optional and the registration function hooks up a default implementation when NULL is seen. From Jamal Hadi Salim. 8) Fix fragment detection in xen-natback driver, from Paul Durrant. 9) Kill dangling enter_memory_pressure method in cg_proto ops, from Eric W Biederman. 10) SKBs that traverse namespaces should have their local_df cleared, from Hannes Frederic Sowa. 11) IOCB file position is not being updated by macvtap_aio_read() and tun_chr_aio_read(). From Zhi Yong Wu. 12) Don't free virtio_net netdev before releasing all of the NAPI instances. From Andrey Vagin. 13) Procfs entry leak in xt_hashlimit, from Sergey Popovich. 14) IPv6 routes that are no cached routes should not count against the garbage collection limits. We had this almost right, but were missing handling addrconf generated routes properly. From Hannes Frederic Sowa. 15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL route info when they are called, from Stefan Tomanek. 16) TUN and MACVTAP have had truncated packet signalling for some time, fix from Jason Wang. 17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet. 18) xen-netback does not interpret the NAPI budget properly for TX work, fix from Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference xen-netback: fix gso_prefix check net: make neigh_priv_len in struct net_device 16bit instead of 8bit drivers: net: cpsw: fix for cpsw crash when build as modules xen-netback: napi: don't prematurely request a tx event xen-netback: napi: fix abuse of budget sch_tbf: use do_div() for 64-bit divide udp: ipv4: must add synchronization in udp_sk_rx_dst_set() net:fec: remove duplicate lines in comment about errata ERR006358 Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature xen-netback: make sure skb linear area covers checksum field net: smc91x: Fix device tree based configuration so it's usable udp: ipv4: fix potential use after free in udp_v4_early_demux() macvtap: signal truncated packets tun: unbreak truncated packet signalling net: sched: htb: fix the calculation of quantum net: sched: tbf: fix the calculation of max_size micrel: add support for KSZ8041RNLI ...
-
