- 27 Jul, 2022 6 commits
-
-
Colin Ian King authored
There is a spelling mistake in a dev_dbg message. Fix it. Link: https://lore.kernel.org/r/20220719110649.759821-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Dmitry Bogdanov authored
RFC7143 states that Initiator decides what type of authentication to use: The initiator MUST continue with: CHAP_N=<N> CHAP_R=<R> or, if it requires target authentication, with: CHAP_N=<N> CHAP_R=<R> CHAP_I=<I> CHAP_C=<C> Allow one way authentication if mutual authentication is configured. That passes some tests from Windows HLK for Mutual CHAP with iSNS. Link: https://lore.kernel.org/r/20220718152555.17084-5-d.bogdanov@yadro.comReviewed-by:Mike Christie <michael.christie@oracle.com> Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Dmitry Bogdanov authored
Allow negotiating AuthMethod=None at CSG=0 (Security Negotiation) when authentication is not required. That is required by the CHAP test in Windows HLK. Link: https://lore.kernel.org/r/20220718152555.17084-4-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
RFC7143 allows both Base64 and Hex encoding for CHAP binary entities like Challenge and Response. Currently the Linux iSCSI target supports only Hex encoding. Add support for Base64 encoded CHAP Challenge and CHAP Response required for CHAP tests in Windows HLK. Link: https://lore.kernel.org/r/20220718152555.17084-3-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Variable length SCSI commands are transferred over iSCSI via two CDB buffers - in Basic Header Segment and in Additional Header Segment (AHS). Since AHS is not supported yet, a target reads just BHS (48 byte) from TCP and treats the remaining octets as a next new iSCSI PDU that causes protocol errors. Add support for the Extended CDB AHS type. Link: https://lore.kernel.org/r/20220718152555.17084-2-d.bogdanov@yadro.comReviewed-by:
-
Johan Hovold authored
Add SC8280XP to the DT schema. Link: https://lore.kernel.org/r/20220711101441.4896-1-johan+linaro@kernel.orgReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
-
- 19 Jul, 2022 22 commits
-
-
Justin Stitt authored
When building with Clang we encounter these warnings: | drivers/target/iscsi/iscsi_target_login.c:719:24: error: format | specifies type 'unsigned short' but the argument has type 'int' | [-Werror,-Wformat] " from node: %s\n", atomic_read(&sess->nconn), - | drivers/target/iscsi/iscsi_target_login.c:767:12: error: format | specifies type 'unsigned short' but the argument has type 'int' | [-Werror,-Wformat] " %s\n", atomic_read(&sess->nconn), - | drivers/target/iscsi/iscsi_target.c:4365:12: error: format specifies | type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat] | " %s\n", atomic_read(&sess->nconn) For all warnings, the format specifier is '%hu' which describes an unsigned short. The resulting type of atomic_read is an int. The proposed fix is to listen to Clang and swap the format specifier. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Link: https://lore.kernel.org/r/20220718180421.49697-1-justinstitt@google.comReviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
Justin Stitt <justinstitt@google.com> Signed-off-by:
-
Daniil Lunev authored
UFS storage devices require bRefClkFreq attribute to be set to operate correctly at high speed mode. The necessary value is determined by what the SoC / board supports. The standard doesn't specify a method to query the value, so the information needs to be fed in separately. DT information feeds into setting up the clock framework, so platforms using DT can get the UFS reference clock frequency from the clock framework. A special node "ref_clk" from the clock array for the UFS controller node is used as the source for the information. On the platforms that do not use DT (e.g. Intel), the alternative mechanism to feed the intended reference clock frequency is necessary. Specifying the necessary information in DSD of the UFS controller ACPI node is an alternative mechanism proposed in this patch. Those can be accessed via firmware property facility in the kernel and in many ways simillar to querying properties defined in DT. This patch introduces a small helper function to query a predetermined ACPI supplied property of the UFS controller, and uses it to attempt retrieving reference clock value, unless that was already done by the clock infrastructure. Link: https://lore.kernel.org/r/20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeidReviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Daniil Lunev <dlunev@chromium.org> Signed-off-by:
-
Xiang Chen authored
Currently if a phy reset or enable phy is issued via sysfs when controller is suspended, those operations will be ignored as SAS_HA_REGISTERED is cleared. If RPM is enabled then we may aggressively suspend automatically. In this case it may be difficult to enable or reset a phy via sysfs, so resume the host in these scenarios. Link: https://lore.kernel.org/r/1657823002-139010-6-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xingui Yang authored
If the I/O completion response frame returned by the target device has been written to the host memory and the err bit in the status field of the received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will let EH analyze and further determine cause of failure. Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@huawei.comSigned-off-by:
Xingui Yang <yangxingui@huawei.com> Signed-off-by:
-
Xiang Chen authored
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned normally. If the cq of SMP I/O is returned with exception actually SMP TAS is never unmapped. Relocate DMA unmap of SMP task to fix the issue. Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP IOs, and remove unnecessary variable n_elem_req. Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
There is duplicated code between slave_configure_v3_hw() and hisi_sas_slave_configure(), so call common function hisi_sas_slave_configure() from slave_configure_v3_hw(). Link: https://lore.kernel.org/r/1657823002-139010-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Dan Carpenter authored
This code is indented one more tab than it should be. Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kiliSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
There is some clean up necessary before returning. Smatch complains: drivers/scsi/mpi3mr/mpi3mr_fw.c:4786 mpi3mr_soft_reset_handler() warn: inconsistent returns '&mrioc->reset_mutex'. Locked on : 4730 Unlocked on: 4786 Link: https://lore.kernel.org/r/YtVCEsxMU8buuMjP@kili Fixes: f10af057 ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: -
Sreekanth Reddy authored
Reduce the VD queue depth on detecting the throttling condition. [mkp: incorporate fix for pointer cast issue reported by the test robot and Guenter Roeck] Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Update driver to track cumulative pending large data size at the controller level and at the throttle group level. When one of the values meet or exceed the controller's firmware-determined high threshold value, then the driver will divert future selective I/O to the firmware. Once both controller level and at the throttle group level cumulative pending large data size reach controller's firmware determined low threshold value, then the driver will stop diverting I/Os to the firmware. Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.comSigned-off-by:
-
Tony Battersby authored
When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read. Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com Cc: <stable@vger.kernel.org> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220713052045.10683-11-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Bikash Hazarika authored
Update manufacturer details to indicate Marvell Semiconductors. Link: https://lore.kernel.org/r/20220713052045.10683-10-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
Bikash Hazarika <bhazarika@marvell.com> Signed-off-by:
-
Nilesh Javali authored
Use le16_to_cpu to fix sparse warning reported for dport_data. sparse warnings: (new ones prefixed by >>) >> drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: sparse: incorrect >> type in assignment (different base types) @@ expected unsigned >> short [usertype] mbx1 @@ got restricted __le16 @@ drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: expected unsigned short [usertype] mbx1 drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: got restricted __le16 >> drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: sparse: >> incorrect type in assignment (different base types) @@ >> expected unsigned short [usertype] mbx2 @@ got restricted __le16 @@ drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: expected unsigned short [usertype] mbx2 drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: got restricted __le16 Link: https://lore.kernel.org/r/20220713052045.10683-9-njavali@marvell.com Fixes: 476da8fa ("scsi: qla2xxx: Add a new v2 dport diagnostic feature") Cc: stable@vger.kernel.org Reported-by:kernel test robot <lkp@intel.com> Reviewed-by:
-
Arun Easi authored
A direct attach tape device, when gets swapped with another, was not discovered. Fix this by looking at loop map and reinitialize link if there are devices present. Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/ Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Quinn Tran authored
vref_count took an extra decrement in the task management path. Add an extra ref count to compensate the imbalance. Link: https://lore.kernel.org/r/20220713052045.10683-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
This patch fixes IKE message being dropped due to error in processing Purex IOCB and Continuation IOCBs. Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com Fixes: fac28079 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
On some platforms, the current logic of relying on finding new packet solely based on signature pattern can lead to driver reading stale packets. Though this is a bug in those platforms, reduce such exposures by limiting reading packets until the IN pointer. Two module parameters are introduced: ql2xrspq_follow_inptr: When set, on newer adapters that has queue pointer shadowing, look for response packets only until response queue in pointer. When reset, response packets are read based on a signature pattern logic (old way). ql2xrspq_follow_inptr_legacy: Like ql2xrspq_follow_inptr, but for those adapters where there is no queue pointer shadowing. Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: -
Bikash Hazarika authored
While requesting a new mailbox command, driver does not write any data to unused registers. Initialize the unused register value to zero while requesting a new mailbox command to prevent stale entry access by firmware. Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Bikash Hazarika authored
Replace display field with the correct field. Link: https://lore.kernel.org/r/20220713052045.10683-3-njavali@marvell.com Fixes: 8777e431 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: stable@vger.kernel.org Reviewed-by:
-
Nilesh Javali authored
This fixes the regression of NVMe discovery failure during driver load time. This reverts commit 6a45c8e1. Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
- 14 Jul, 2022 12 commits
-
-
Don Brace authored
Link: https://lore.kernel.org/r/165730608687.177165.11815510982277242966.stgit@brunhildaReviewed-by:
Gerry Morong <gerry.morong@microchip.com> Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Don Brace authored
Update copyright to current year. Link: https://lore.kernel.org/r/165730608177.177165.13184715486635363193.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Allow user to override the default driver timeout for controller ready. There are some rare configurations which require the driver to wait longer than the normal 3 minutes for the controller to complete its bootup sequence and be ready to accept commands from the driver. The module parameter is: ctrl_ready_timeout= { 0 | 30-1800 } and specifies the timeout in seconds for the driver to wait for controller ready. The valid range is 0 or 30-1800. The default value is 0, which causes the driver to use a timeout of 180 seconds (3 minutes). Link: https://lore.kernel.org/r/165730607666.177165.9221211345284471213.stgit@brunhildaReviewed-by:Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by:
-
Kevin Barnett authored
Change removing a LUN using sysfs from an internal driver function pqi_remove_all_scsi_devices() to using the .slave_destroy entry in the scsi_host_template. A LUN can be deleted via sysfs using this syntax: echo 1 > /sys/block/sdX/device/delete Link: https://lore.kernel.org/r/165730607154.177165.9723066932202995774.stgit@brunhildaReviewed-by:
-
Mike McGowen authored
Allow SMP affinity to be changeable by disabling managed interrupts. On distributions where the driver is enabled for multi-queue support the driver utilizes kernel managed interrupts, which automatically distributes interrupts to all available CPUs and assigns SMP affinity. On most distributions, the affinity can not be changed by the user. This change will allow managed interrupts to be disabled by the user via a module parameter while still allowing multi-queue support to function properly. Use the module parameter disable_managed_interrupts=1 Link: https://lore.kernel.org/r/165730606638.177165.12846020942931640329.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Correct a rare stale RAID map access when performing AIO during a RAID configuration change. A race condition in the driver could cause it to access a stale RAID map when a logical volume is reconfigured. Modify the driver logic to invalidate a RAID map very early when a RAID configuration change is detected and only switch to a new RAID map after the driver detects that the RAID map has changed. Link: https://lore.kernel.org/r/165730606128.177165.7671413443814750829.stgit@brunhildaReviewed-by:
-
Mahesh Rajashekhara authored
Correct a SOP READ and WRITE DMA flags for some requests. This update corrects DMA direction issues with SCSI commands removed from the controller's internal lookup table. Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller lookup table and exposed a DMA direction flag issue. SCSI READ BLOCK LIMITS was recently removed from our controller lookup table so the controller uses the respective IU flag field to set the DMA data direction. Since the DMA direction is incorrect the FW never completes the request causing a hang. Some SCSI commands which use SCSI READ BLOCK LIMITS * sg_map * mt -f /dev/stX status After updating controller firmware, users may notice their tape units failing. This patch resolves the issue. Also, the AIO path DMA direction is correct. The DMA direction flag is a day-one bug with no reported BZ. Fixes: 6c223761 ("smartpqi: initial commit of Microsemi smartpqi driver") Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhildaReviewed-by:Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com> Signed-off-by:
-
Kevin Barnett authored
Change method used to detect controller firmware crash during PQI reset. PQI reset can fail with error -6 if firmware takes > 100ms to complete reset. Method used by driver to detect controller firmware crash during PQI was incorrect in some cases. Link: https://lore.kernel.org/r/165730605108.177165.1132931838384767071.stgit@brunhildaReviewed-by:
-
Mike McGowen authored
Add PCI IDs for Lenovo controllers (values in hex): VID / DID / SVID / SDID ---- ---- ---- ---- Lenovo 4350-8i HBA 9005 / 028f / 1d49 / 0220 Lenovo 4350-16i HBA 9005 / 028f / 1d49 / 0221 Lenovo 5350-8i RAID 9005 / 028f / 1d49 / 0520 Lenovo 5350-8i Internal RAID 9005 / 028f / 1d49 / 0522 Lenovo 9350-8i RAID 9005 / 028f / 1d49 / 0620 Lenovo 9350-8i Internal RAID 9005 / 028f / 1d49 / 0621 Lenovo 9350-16i RAID 9005 / 028f / 1d49 / 0622 Lenovo 9350-16i Internal RAID 9005 / 028f / 1d49 / 0623 Link: https://lore.kernel.org/r/165730604598.177165.9910276232981721083.stgit@brunhildaReviewed-by: -
Mike McGowen authored
Add the PCI ID for (values in hex): VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartHBA 2100-8i-o 9005 / 0285 / 9005 / 0659 Link: https://lore.kernel.org/r/165730604089.177165.17257514581321583667.stgit@brunhildaReviewed-by: -
Sagar Biradar authored
Fail all outstanding requests after a PCI linkdown. Block access to device SCSI attributes during the following conditions: "Cable pull" is called PQI_CTRL_SURPRISE_REMOVAL. "PCIe Link Down" is called PQI_CTRL_GRACEFUL_REMOVAL. Block access to device SCSI attributes during and in rare instances when the controller goes offline. Either outstanding requests or the access of SCSI attributes post linkdown can lead to a hang. Post linkdown, driver does not fail the outstanding requests leading to long wait time before all the IOs eventually fail. Also access of the SCSI attributes by host applications can lead to a system hang. Link: https://lore.kernel.org/r/165730603578.177165.4699352086827187263.stgit@brunhildaReviewed-by:
Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by:
-
Kumar Meiyappan authored
Add driver support for up to 256 LUNs per device. Update AIO path to pass the appropriate LUN number for base-code to target the correct LUN. Update RAID IO path to pass the appropriate LUN number for FW to target the correct LUN. Pass the correct LUN number while doing a LUN reset. Count the outstanding commands based on LUN number. While removing a Multi-LUN device, wait for all outstanding commands to complete for all LUNs. Add Feature bit support. Link: https://lore.kernel.org/r/165730603067.177165.14016422176841798336.stgit@brunhildaReviewed-by:
Kumar Meiyappan <Kumar.Meiyappan@microchip.com> Signed-off-by:
-
