- 07 Sep, 2021 2 commits
-
-
Candice Li authored
Creat common PSP TA load function and update PSP ta_mem_context with size information. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
fix the issue of uploading powerplay table due to the dependancy of rlc. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Jack Gui <Jack.Gui@amd.com> Signed-off-by:
-
- 02 Sep, 2021 1 commit
-
-
Ernst Sjöstrand authored
Seems like newer cards can have even more instances now. Found by UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29 index 8 is out of range for type 'uint32_t *[8]' Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697 Cc: stable@vger.kernel.org Signed-off-by:
Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by:
-
- 01 Sep, 2021 28 commits
-
-
Colin Ian King authored
Pointer sink is being inintialized with a value that is never read, it is later being re-assigned a new value. Remove the redundant initialization. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yifan Zha authored
[Why] Sending invalid SMU message in sriov cause set dpm level fail. [How] Update message table based on SMU firmware. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Review-by:
Horace Chen <Horace.Chen@amd.com> Signed-off-by:
-
Satyajit Sahu authored
Schedule the encode job in VCE/VCN encode ring based on the priority set by UMD. Signed-off-by:
Satyajit Sahu <satyajit.sahu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Satyajit Sahu authored
VCN has multiple rings. Set the proper priority level for each encode ring while initializing. Signed-off-by:
-
Satyajit Sahu authored
VCE has multiple rings. Set the proper priority level for each ring while initializing. Signed-off-by:
-
Candice Li authored
Add MPIO to RAS block Signed-off-by:
-
Candice Li authored
Create common PSP TA unload function and replace all common TA unloading sequences. Signed-off-by:
-
Tom St Denis authored
This new debugfs interface uses an IOCTL interface in order to pass along state information like SRBM and GRBM bank switching. This new interface also allows a full 32-bit MMIO address range which the previous didn't. With this new design we have room to grow the flexibility of the file as need be. (v2): Move read/write to .read/.write, fix style, add comment for IOCTL data structure (v3): C style comments (v4): use u32 in struct and remove offset variable (v5): Drop flag clearing in op function, use 0xFFFFFFFF for broadcast instead of 0x3FF, use mutex for op/ioctl. Signed-off-by:Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a DC_LOG_WARNING message. Fix it. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Nirmoy Das authored
Currently AMDGPU_RING_PRIO_MAX is redefinition of a max gfx hwip priority, this won't work well when we will have a hwip with different set of priorities than gfx. Also, HW ring priorities are different from ring priorities. Create a global enum for ring priority levels which each HWIP can use to define its own priority levels. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Nirmoy Das authored
To get a hardware queue priority for a context, we are currently mapping AMDGPU_CTX_PRIORITY_* to DRM_SCHED_PRIORITY_* and then to hardware queue priority, which is not the right way to do that as DRM_SCHED_PRIORITY_* is software scheduler's priority and it is independent from a hardware queue priority. Use userspace provided context priority, AMDGPU_CTX_PRIORITY_* to map a context to proper hardware queue priority. Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: - FW promotion 0.0.80 - Add missing ABM register offsets - Fix in swizzle mode mapping - Emulated sink support for freesync - Improvoments in max target bpp Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
- Add volatile to avoid incomplete flushing of data in rb Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Alvin Lee authored
[Why] Swizzle mode enum for DC_SW_VAR_R_X was existing, but not mapped correctly. [How] Update mapping and conversion for DC_SW_VAR_R_X. Reviewed-by:
XiangBing Foo <XiangBing.Foo@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Cc: stable@vger.kernel.org Tested-by:
-
Wyatt Wood authored
[Why + How] Initialize GSP1 SDP header for use in DMCUB FW. Reviewed-by:
Wyatt Wood <wyatt.wood@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why] When forced modes are used during certain IGT tests, without a real connector, dc_sink would be null when standard modes are added by the driver. Calling the function to update freesync capabilities at this point will result in an error being printed [How] Use emulated sink when available. If both the normal and emulated sink are not available, set all freesync parameters to 0. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Roman Li authored
[Why] Some monitors exhibit corruption at 16bpp DSC. [How] - Add helpers for patching edid caps. - Use it for limiting DSC target bitrate to 15bpp for known monitors Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Roman Li <Roman.Li@amd.com> Cc: stable@vger.kernel.org Tested-by:
-
Roman Li authored
[Why] Max target bpp override is an option for working around DSC issues. It is supported on DC level, but was not used in DM. [How] Use actual option value instead of 0. Reviewed-by:
-
Michael Strauss authored
[WHY] Clocks don't get recalculated in 0 stream/0 pipe configs, blocking S0i3 if dcfclk gets high enough [HOW] Create DCN31 copy of DCN30 bandwidth validation func which doesn't entirely skip validation in 0 pipe scenarios Override dcfclk to vlevel 0/min value during validation if pipe count is 0 Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Jude Shih authored
[WHY] To add support for HPD interrupt handling from DMUB. HPD interrupt could be triggered from outbox1 from DMUB [HOW] 1) Use queue_work to handle hpd task from outbox1 2) Add handle_hpd_irq_helper to share interrupt handling code between legacy and DMUB HPD from outbox1 3) Added DMUB HPD handling in dmub_srv_stat_get_notification(). HPD handling callback function and wake up the DMUB thread. Reviewed-by:
Jude Shih <shenshih@amd.com> Tested-by:
-
Josip Pavic authored
[Why] Some ABM registers don't exist on DCN 3.01, so are missing from its register offset list. However, this list was copied to later versions of DCN that do have these registers. As a result, they're inaccessible from the driver on those DCN versions even though they exist. [How] Add the missing ABM register offsets to DCN 3.02+ Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Fangzhi Zuo authored
1. Retrieve 128/132b link cap. 2. 128/132b link training and payload allocation. 3. UHBR10 link rate support. [squash in warning fixes - Alex] Signed-off-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Fangzhi Zuo authored
Parse DP2 encoder caps and hpo instance from bios Signed-off-by:
-
Fangzhi Zuo authored
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | | +--------------------+ | | v ===============|============= v +------------------+ | DIO Output Mux | +------------------+ | v +-----+ | PHY | +-----+ | PHYD32CLK[0] v +------+ | DCCG | +------+ | v SYMCLK32 Signed-off-by: -
Fangzhi Zuo authored
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | v +--------------------+ [squash in warning fixes - Alex] Signed-off-by: -
Fangzhi Zuo authored
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | v v v v +----------------------+ | HPO Stream Encoder | +----------------------+ [squash in warning fixes - Alex] Signed-off-by: -
Fangzhi Zuo authored
HW Blocks: +-----+ | HDA | +-----+ | | HPO ===============|============= | v | +-----+ | | APG | v +-----+ Signed-off-by: -
Alex Sierra authored
During svm restore pages interrupt handler, kfd_process ref count was never dropped when xnack was disabled. Therefore, the object was never released. Fixes: 2383f56b ("drm/amdkfd: page table restore through svm API") Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Reviewed-by:
Philip Yang <philip.yang@amd.com> Reviewed-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
- 31 Aug, 2021 8 commits
-
-
Jiawei Gu authored
Enable pp_num_states, pp_cur_state, pp_force_state, pp_table sysfs under SRIOV 1-VF scenario. Signed-off-by:
Jiawei Gu <Jiawei.Gu@amd.com> Signed-off-by:
-
Philip Yang authored
Get process vm root BO ref in case process is exiting and root BO is freed, to avoid NULL pointer dereference backtrace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Call Trace: amdgpu_show_fdinfo+0xfe/0x2a0 [amdgpu] seq_show+0x12c/0x180 seq_read+0x153/0x410 vfs_read+0x91/0x140[ 3427.206183] ksys_read+0x4f/0xb0 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
xinhui pan authored
Fall through to handle the error instead of return. Fixes: f8aab604 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs") Cc: stable@vger.kernel.org Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
-
Guchun Chen authored
This gurantees no more work on the ring can be submitted to hardware in suspend/resume case, otherwise a potential race will occur and the ring will get no chance to stay empty before suspend. v2: Call drm_sched_resubmit_job before drm_sched_start to restart jobs from the pending list. Suggested-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
John Clements authored
Resolve incorrect register address Reviewed-by:
-
Michael Strauss authored
[WHY] lt_settings' pointers remain uninitialized but nonzero if display fails to light up with no DPCD/EDID info populated, leading to a hang on access Reviewed-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
-
Angus Wang authored
[WHY] The change has caused high idle memory clock speed and power consumption at some resolutions and frame rates for Navi10 [HOW] Reverted change "drm/amd/display: Fixed Intermittent blue screen on OLED panel" Reviewed-by:
Angus Wang <angus.wang@amd.com> Tested-by:
-
Anson Jacob authored
Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by:Anson Jacob <Anson.Jacob@amd.com> Signed-off-by:
-
- 30 Aug, 2021 1 commit
-
-
Colin Ian King authored
There are three identical spelling mistakes in dev_err messages. Fix these. Signed-off-by:
-
