- 10 Jun, 2013 1 commit
-
-
Matthias Schiffer authored
The rtnl_lock in batadv_store_mesh_iface has been converted to a rtnl_trylock some time ago to avoid a possible deadlock between rtnl and s_active on removal of the sysfs nodes. The behaviour introduced by that was quite confusing as it could lead to the sysfs store to fail, making batman-adv setup scripts unreliable. As recently the sysfs removal was postponed to a worker not running with the rtnl taken, the deadlock can't occur any more and it is safe to change the trylock back to a lock to make the sysfs store reliable again. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
- 07 Jun, 2013 2 commits
-
-
Eric Dumazet authored
qdisc_get_rtab() should check not only the keys in struct tc_ratespec, but also the full data[] array. "tc ... linklayer atm " only perturbs values in the 256 slots array. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fix from David Miller: "This is a quick one commit pull request to cure the regression introduced by the MSG_CMSG_COMPAT change." (Background: commit 1be374a0 completely broke 32-bit COMPAT handling by not only disallowing MSG_CMSG_COMPAT from user APIs, but clearing it in our own internal use too!) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Unbreak compat_sys_{send,recv}msg
-
- 06 Jun, 2013 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg Kroah-Hartman: "Here are some staging and IIO driver fixes for the 3.10-rc5 release. All of them are tiny, and fix a number of reported issues (build and runtime)" Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'staging-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:inkern: Fix typo/bug in convert raw to processed. iio: frequency: ad4350: Fix bug / typo in mask inkern: iio_device_put after incorrect return/goto staging: alarm-dev: information leak in alarm_compat_ioctl() iio:callback buffer: free the scan_mask staging: alarm-dev: information leak in alarm_ioctl() drivers: staging: zcache: fix compile error staging: dwc2: fix value of dma_mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg Kroah-Hartman: "Here are some small bugfixes, and one revert, of serial driver issues that have been reported" * tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" serial: samsung: enable clock before clearing pending interrupts during init serial/imx: disable hardware flow control at startup
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of USB bugfixes and new device ids for the 3.10-rc5 tree. Nothing major here, a number of new device ids (and movement from the option to the zte_ev driver of a number of ids that we had previously gotten wrong, some xhci bugfixes, some usb-serial driver fixes that were recently found, some host controller fixes / reverts, and a variety of smaller other things" * tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (29 commits) USB: option,zte_ev: move most ZTE CDMA devices to zte_ev USB: option: blacklist network interface on Huawei E1820 USB: whiteheat: fix broken port configuration USB: serial: fix TIOCMIWAIT return value USB: mos7720: fix hardware flow control USB: keyspan: remove unused endpoint-array access USB: keyspan: fix bogus array index USB: zte_ev: fix broken open USB: serial: Add Option GTM681W to qcserial device table. USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device USB: EHCI: fix regression related to qh_refresh() usbfs: Increase arbitrary limit for USB 3 isopkt length USB: zte_ev: fix control-message timeouts USB: mos7720: fix message timeouts USB: iuu_phoenix: fix bulk-message timeout USB: ark3116: fix control-message timeout USB: mos7840: fix DMA to stack USB: mos7720: fix DMA to stack USB: visor: fix initialisation of Treo/Kyocera devices USB: serial: fix Treo/Kyocera interrrupt-in urb context ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "This fixes a crash when booting a 32-bit kernel via the EFI boot stub. PCI ROM from EFI x86/PCI: Map PCI setup data with ioremap() so it can be in highmem" * tag 'pci-v3.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Map PCI setup data with ioremap() so it can be in highmem
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull more xfs updates from Ben Myers: "Here are several fixes for filesystems with CRC support turned on: fixes for quota, remote attributes, and recovery. There is also some feature work related to CRCs: the implementation of CRCs for the inode unlinked lists, disabling noattr2/attr2 options when appropriate, and bumping the maximum number of ACLs. I would have preferred to defer this last category of items to 3.11. This would require setting a feature bit for the on-disk changes, so there is some pressure to get these in 3.10. I believe this represents the end of the CRC related queue. - Rework of dquot CRCs - Fix for remote attribute invalidation of a leaf - Fix ordering of transaction replay in recovery - Implement CRCs for inode unlinked list - Disable noattr2/attr2 mount options when CRCs are enabled - Bump the limitation of ACL entries for v5 superblocks" * tag 'for-linus-v3.10-rc5' of git://oss.sgi.com/xfs/xfs: xfs: increase number of ACL entries for V5 superblocks xfs: disable noattr2/attr2 mount options for CRC enabled filesystems xfs: inode unlinked list needs to recalculate the inode CRC xfs: fix log recovery transaction item reordering xfs: fix remote attribute invalidation for a leaf xfs: rework dquot CRCs
-
Andy Lutomirski authored
I broke them in this commit: commit 1be374a0 Author: Andy Lutomirski <luto@amacapital.net> Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Williams authored
Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Chinner authored
The limit of 25 ACL entries is arbitrary, but baked into the on-disk format. For version 5 superblocks, increase it to the maximum nuber of ACLs that can fit into a single xattr. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinuguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 5c87d4bc)
-
Dave Chinner authored
attr2 format is always enabled for v5 superblock filesystems, so the mount options to enable or disable it need to be cause mount errors. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit d3eaace8)
-
Dave Chinner authored
The inode unlinked list manipulations operate directly on the inode buffer, and so bypass the inode CRC calculation mechanisms. Hence an inode on the unlinked list has an invalid CRC. Fix this by recalculating the CRC whenever we modify an unlinked list pointer in an inode, ncluding during log recovery. This is trivial to do and results in unlinked list operations always leaving a consistent inode in the buffer. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 0a32c26e)
-
Dave Chinner authored
There are several constraints that inode allocation and unlink logging impose on log recovery. These all stem from the fact that inode alloc/unlink are logged in buffers, but all other inode changes are logged in inode items. Hence there are ordering constraints that recovery must follow to ensure the correct result occurs. As it turns out, this ordering has been working mostly by chance than good management. The existing code moves all buffers except cancelled buffers to the head of the list, and everything else to the tail of the list. The problem with this is that is interleaves inode items with the buffer cancellation items, and hence whether the inode item in an cancelled buffer gets replayed is essentially left to chance. Further, this ordering causes problems for log recovery when inode CRCs are enabled. It typically replays the inode unlink buffer long before it replays the inode core changes, and so the CRC recorded in an unlink buffer is going to be invalid and hence any attempt to validate the inode in the buffer is going to fail. Hence we really need to enforce the ordering that the inode alloc/unlink code has expected log recovery to have since inode chunk de-allocation was introduced back in 2003... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit a775ad77)
-
Dave Chinner authored
When invalidating an attribute leaf block block, there might be remote attributes that it points to. With the recent rework of the remote attribute format, we have to make sure we calculate the length of the attribute correctly. We aren't doing that in xfs_attr3_leaf_inactive(), so fix it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinuguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 59913f14)
-
Dave Chinner authored
Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6fcdc59d)
-
Peter Zijlstra authored
Since the introduction of preemptible mmu_gather TLB fast mode has been broken. TLB fast mode relies on there being absolutely no concurrency; it frees pages first and invalidates TLBs later. However now we can get concurrency and stuff goes *bang*. This patch removes all tlb_fast_mode() code; it was found the better option vs trying to patch the hole by entangling tlb invalidation with the scheduler. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild fixes from Michal Marek: "There is one fix for a kbuild regression, plus three kconfig fixes for bugs that have alway been there, but are simple enough to be fixed in an -rc" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig/menu.c: fix multiple references to expressions in menu_add_prop() mconf: handle keys in empty dialogs kbuild: Don't assume dts files live in arch/*/boot/dts scripts/config: fix assignment of parameters for short version of --*-after options
-
- 05 Jun, 2013 15 commits
-
-
Matt Fleming authored
f9a37be0 ("x86: Use PCI setup data") added support for using PCI ROM images from setup_data. This used phys_to_virt(), which is not valid for highmem addresses, and can cause a crash when booting a 32-bit kernel via the EFI boot stub. pcibios_add_device() assumes that the physical addresses stored in setup_data are accessible via the direct kernel mapping, and that calling phys_to_virt() is valid. This isn't guaranteed to be true on x86 where the direct mapping range is much smaller than on x86-64. Calling phys_to_virt() on a highmem address results in the following: BUG: unable to handle kernel paging request at 39a3c198 IP: [<c262be0f>] pcibios_add_device+0x2f/0x90 ... Call Trace: [<c2370c73>] pci_device_add+0xe3/0x130 [<c274640b>] pci_scan_single_device+0x8b/0xb0 [<c2370d08>] pci_scan_slot+0x48/0x100 [<c2371904>] pci_scan_child_bus+0x24/0xc0 [<c262a7b0>] pci_acpi_scan_root+0x2c0/0x490 [<c23b7203>] acpi_pci_root_add+0x312/0x42f ... The solution is to use ioremap() instead of phys_to_virt() to map the setup data into the kernel address space. [bhelgaas: changelog] Tested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org # v3.8+
-
Johan Hovold authored
Fix regression introduced by commit 143d9d96 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix timeouts with direct mode authentication in mac80211, from Stanislaw Gruszka. 2) Aggregation sessions can deadlock in ath9k, from Felix Fietkau. 3) Netfilter's xt_addrtype doesn't work with ipv6 due to route lookups creating undesirable cache entries, from Florian Westphal. 4) Fix netfilter's ipt_ULOG from generating non-NULL terminated strings. 5) Fix netdev transmit queue crashes in mac80211, from Johannes Berg. 6) Fix copy and paste error in 802.11 stack that broke reporting of 64-bit station tx statistics, from Felix Fietkau. 7) When qlge_probe fails, it leaks the netdev. Fix from Wei Yongjun. 8) SKB control block (where we store the IP options information, amongst other things) must be cleared properly otherwise ICMP sending can crash for IP tunnels. Fix from Eric Dumazet. 9) Verification of Energy Efficient Ether support was coded wrongly, the test was inversed. Fix from Giuseppe CAVALLARO. 10) TCP handles redirects improperly because the wrong flow key is used for the route lookup. From Michal Kubecek. 11) Don't interpret MSG_CMSG_COMPAT from userspace, fix from Andy Lutomirski. 12) The new AF_VSOCK was missing from the lockdep string table, fix from Federico Vaga. 13) be2net doesn't handle checksumming of IP fragments properly, from Somnath Kotur. 14) Fix several bugs in the device address list code that lead to crashes and other misbehaviors. From Jay Vosburgh. 15) Fix ipv6 segmentation handling of fragmented GRE tunnel traffic, from Pravin B Shalr. 16) Fix usage of stale policies in IPSEC layer, from Paul Moore. 17) Fix team driver dump of ports when there are a large number of them, from Jiri Pirko. 18) Fix softlockups in UDP ipv4 socket lookup causes by and error in the hlist_nulls_for_each_entry_rcu() macro. From Eric Dumazet. 19) Fix several regressions added by the high rate accuracy changes to the htb packet scheduler. From Eric Dumazet. 20) Fix DMA'ing onto the stack in esd_usb2 and peak_usb CAN drivers, from Olivier Sobrie and Marc Kleine-Budde. 21) Fix unremovable network devices due to missing route pointer installation in the per-device ipv6 address list entries. From Gao feng. 22) Apply the tg3 5719 DMA workaround on 5720 chips as well, otherwise we get stalls. From Nithin Sujir. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) net_sched: htb: do not mix 1ns and 64ns time units net: fix sk_buff head without data area tg3: Add read dma workaround for 5720 net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANAR bnx2x: Fix bridged GSO for 57710/57711 chips net: fec: add fallback to random MAC address bnx2x: fix TCP offload for tunneling ipv4 over ipv6 ipv6: assign rt6_info to inet6_ifaddr in init_loopback net/mlx4_core: Keep VF assigned MAC in the PF admin table net/mlx4_en: Handle unassigned VF MAC address correctly net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is sufficiently initialized net/mlx4_en: Fix adaptive moderation cq update net: can: peak_usb: Do not do dma on the stack net: can: esd_usb2: Do not do dma on the stack net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware. net_sched: restore "overhead xxx" handling net: force a reload of first item in hlist_nulls_for_each_entry_rcu hyperv: Fix vlan_proto setting in netvsc_recv_callback() team: fix port list dump for big number of ports list: introduce list_first_entry_or_null ...
-
Eric Dumazet authored
commit 56b765b7 ("htb: improved accuracy at high rates") added another regression for low rates, because it mixes 1ns and 64ns time units. So the maximum delay (mbuffer) was not 60 second, but 937 ms. Lets convert all time fields to 1ns as 64bit arches are becoming the norm. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira authored
Eric Dumazet spotted that we have to check skb->head instead of skb->data as skb->head points to the beginning of the data area of the skbuff. Similarly, we have to initialize the skb->head pointer, not skb->data in __alloc_skb_head. After this fix, netlink crashes in the release path of the sk_buff, so let's fix that as well. This bug was introduced in (0ebd0ac5 net: add function to allocate sk_buff head without data area). Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nithin Sujir authored
Commit 091f0ea3 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jens Renner \(EFE\) authored
This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner <renner@efe-gmbh.de> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65e "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC fixes from Chris Ball: - sdhci-acpi: Fix initial runtime PM status, add more ACPI IDs - atmel-mci, omap_hsmmc: DT handling fixes - esdhc-imx: Fix SDIO IRQs, fix multiblock reads (both h/w errata) * tag 'mmc-fixes-for-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case mmc: omap_hsmmc: convert to dma_request_slave_channel_compat mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5 mmc: sdhci-pci: add more device ids mmc: sdhci-acpi: add more device ids mmc: sdhci-acpi: fix initial runtime pm status mmc: atmel-mci: convert to dma_request_slave_channel_compat() mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53 mmc: sdhci-esdhc-imx: Fix SDIO interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just a 2 small driver fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix a typo for Cintiq 22HDT Input: synaptics - fix sync lost after resume on some laptops
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm bugfixes from Gleb Natapov: "The bulk of the fixes is in MIPS KVM kernel<->userspace ABI. MIPS KVM is new for 3.10 and some problems were found with current ABI. It is better to fix them now and do not have a kernel with broken one" * 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix race in apic->pending_events processing KVM: fix sil/dil/bpl/spl in the mod/rm fields KVM: Emulate multibyte NOP ARM: KVM: be more thorough when invalidating TLBs ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls. mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REG mips/kvm: Use ARRAY_SIZE() instead of hardcoded constants in kvm_arch_vcpu_ioctl_{s,g}et_regs mips/kvm: Fix name of gpr field in struct kvm_regs. mips/kvm: Fix ABI for use of 64-bit registers. mips/kvm: Fix ABI for use of FPU.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull gfs2 fixes from Steven Whitehouse: "There are four patches this time. The first fixes a problem where the wrong descriptor type was being written into the log for journaled data blocks. The second fixes a race relating to the deallocation of allocator data. The third provides a fallback if kmalloc is unable to satisfy a request to allocate a directory hash table. The fourth fixes the iopen glock caching so that inodes are deleted in a more timely manner after rmdir/unlink" * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Don't cache iopen glocks GFS2: Fall back to vmalloc if kmalloc fails for dir hash tables GFS2: Increase i_writecount during gfs2_setattr_size GFS2: Set log descriptor type for jdata blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "One patch fixes an Oops introduced in 3.9 with the readdirplus feature. The rest are fixes for async-dio in 3.10" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix alignment in short read optimization for async_dio fuse: return -EIOCBQUEUED from fuse_direct_IO() for all async requests fuse: fix readdirplus Oops in fuse_dentry_revalidate fuse: update inode size and invalidate attributes on fallocate fuse: truncate pagecache range on hole punch fuse: allocate for_background dio requests based on io->async state
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: "One is fixing warning reported by sparse and the second warning was reported by Geert in his build regressions/improvements status update for -rc4." * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Use static inline functions in cacheflush.h microblaze: Fix sparse warnings
-
Lucas Stach authored
If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Jun, 2013 5 commits
-
-
Dmitry Kravkov authored
FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao feng authored
Commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-canDavid S. Miller authored
Marc Kleine-Budde says: ==================== here are there fixes for the v3.10 release cycle: The first patch by Jonas Peterson and Olivier Sobrie fixes the reception of CAN frames on Kvaser's "USBcan Pro" and "USBcan R" type hardware. The last two patches by Olivier Sobrie (for esd_usb2) and me (for peak_usb) change the memory handling for the USB messages from stack to kmalloc(), as memory used for DMA should not be allocated on stack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-