- 25 Sep, 2015 22 commits
-
-
Josh Wu authored
This patch will get the DT parameters of vsync/hsync/pixclock polarity, and pass to driver. Also add a debug information for test purpose. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The emb_crc_sync, mck_hz, asd and asd_sizes platform data fields are unused, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
All in-tree users have migrated to DT, remove support for platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [josh.wu@atmel.com: squash the commit to remove the unused variable: dev] Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Put the endpoint DT node earlier to avoid the need for goto statements to a cleanup code block in case of errors. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
After adding the format check in try_fmt()/set_fmt(), we don't need any format check in configure_geometry(). So make configure_geometry() as void type. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
As in set_fmt() function we only need to know which format is been set, we don't need to access the ISI hardware in this moment. So move the configure_geometry(), which access the ISI hardware, to start_streaming() will make code more consistent and simpler. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Currently only support YUV format from camera sensor. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
If ISI is working on a 1024x768 or higher resolution, it needs longer time to disable ISI. So this patch will increase timeout to 500ms. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Geert Uytterhoeven authored
If CONFIG_PM=n: drivers/media/platform/soc_camera/atmel-isi.c:1044: warning: 'atmel_isi_runtime_suspend' defined but not used drivers/media/platform/soc_camera/atmel-isi.c:1054: warning: 'atmel_isi_runtime_resume' defined but not used Protect the unused functions by #ifdef CONFIG_PM to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sergei Shtylyov authored
Hans Verkuil says: "The only place querystd can be called is in the QUERYSTD ioctl, all other ioctls should use the last set standard." So call the g_std() subdevice method instead of querystd() in the driver's set_fmt() method. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sergei Shtylyov authored
rcar_vin_set_fmt() defaults to PAL when the subdevice's querystd() method call fails (e.g. due to I2C error). This doesn't work very well when a camera being used outputs NTSC which has different order of fields and resolution. Let us stop pretending and return the actual error except when the querystd() method is not implemented, in which case we'll have to set the 'field' variable to V4L2_FIELD_NONE. Note that doing this would prevent video capture on at least Renesas Henninger/ Porter boards where I2C seems particularly buggy. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Geert Uytterhoeven authored
Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy board support"), R-Car Gen2 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
Since in soc_of_bind() it may use the of node's full name as the clk_name, and this full name may be longer than 32 characters, take at91 i2c sensor as an example, length is 34 bytes: /ahb/apb/i2c@f8028000/camera@0x30 So this patch increase the clk_name[] array size to 64. It seems big enough so far. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The hardware timestamping implementation has been reported as not working correctly on at least the Logitech C920. Until this can be fixed, disable it by default. Reported-by: Peter Rabbitson <rabbit@rabbit.us> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
* Constify struct * Fix comments * Fix alignment * Use modulus to transfer phase angles * Correct float [-1.0, +1.0] to s8 [-128, 127] conversion Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Add user control to adjust generated FM deviation. Default it to 75kHz like public FM radio broadcast. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrzej Hajda authored
Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match compatible ioctls on ARM64 kernels without breaking AMD64 some fields should be aligned using compat_s64 type and in one case struct should be unpacked. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Cc: <stable@vger.kernel.org> # for v3.10 and up [hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Darek Zielski authored
Add Leadtek Winfast TV2100 FM card to saa7134 driver. It is a card bearing SAA7130HL chip. Signed-off-by: Darek Zielski <dz1125tor@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Alexander Kuleshov authored
printk() supports %*ph format specifier for printing a small buffers, let's use it intead of %02x %02x... Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Zahari Doychev authored
This patch removes unnecessary mutex queue unlock/lock sequence causing bad unlock balance in v4l2_m2m_poll when the last buffer on the destination queue has been dequeued and adds spin lock protection for the done list list_empty calls. [ 144.990873] ===================================== [ 144.995584] [ BUG: bad unlock balance detected! ] [ 145.000301] 4.1.0-00137-ga105070 #98 Tainted: G W [ 145.006140] ------------------------------------- [ 145.010851] demux:sink/487 is trying to release lock (&dev->dev_mutex) at: [ 145.017785] [<808cc578>] mutex_unlock+0x18/0x1c [ 145.022322] but there are no more locks to release! [ 145.027205] [ 145.027205] other info that might help us debug this: [ 145.033741] no locks held by demux:sink/487. [ 145.038015] [ 145.038015] stack backtrace: [ 145.042385] CPU: 2 PID: 487 Comm: demux:sink Tainted: G W 4.1.0-00137-ga105070 #98 [ 145.051089] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 145.057622] Backtrace: [ 145.060102] [<80014a4c>] (dump_backtrace) from [<80014cc4>] (show_stack+0x20/0x24) [ 145.067679] r6:80cedf78 r5:00000000 r4:00000000 r3:00000000 [ 145.073421] [<80014ca4>] (show_stack) from [<808c61e0>] (dump_stack+0x8c/0xa4) [ 145.080661] [<808c6154>] (dump_stack) from [<80072b64>] (print_unlock_imbalance_bug+0xb8/0xe8) [ 145.089277] r6:808cc578 r5:ac6cd050 r4:ac38e400 r3:00000001 [ 145.095020] [<80072aac>] (print_unlock_imbalance_bug) from [<80077db4>] (lock_release+0x1a4/0x250) [ 145.103983] r6:808cc578 r5:ac6cd050 r4:ac38e400 r3:00000000 [ 145.109728] [<80077c10>] (lock_release) from [<808cc470>] (__mutex_unlock_slowpath+0xc4/0x1b4) [ 145.118344] r9:acb27a41 r8:00000000 r7:81553814 r6:808cc578 r5:60030013 r4:ac6cd01c [ 145.126190] [<808cc3ac>] (__mutex_unlock_slowpath) from [<808cc578>] (mutex_unlock+0x18/0x1c) [ 145.134720] r7:00000000 r6:aced7cd4 r5:00000041 r4:acb87800 [ 145.140468] [<808cc560>] (mutex_unlock) from [<805a98b8>] (v4l2_m2m_fop_poll+0x5c/0x64) [ 145.148494] [<805a985c>] (v4l2_m2m_fop_poll) from [<805955a0>] (v4l2_poll+0x6c/0xa0) [ 145.156243] r6:aced7bec r5:00000000 r4:ac6cc380 r3:805a985c [ 145.161991] [<80595534>] (v4l2_poll) from [<80156edc>] (do_sys_poll+0x230/0x4c0) [ 145.169391] r5:00000000 r4:aced7be4 [ 145.173013] [<80156cac>] (do_sys_poll) from [<801574a8>] (SyS_ppoll+0x1d4/0x1fc) [ 145.180414] r10:00000000 r9:aced6000 r8:00000000 r7:00000000 r6:75c04538 r5:00000002 [ 145.188338] r4:00000000 [ 145.190906] [<801572d4>] (SyS_ppoll) from [<800108c0>] (ret_fast_syscall+0x0/0x54) [ 145.198481] r8:80010aa4 r7:00000150 r6:75c04538 r5:00000002 r4:00000008 Signed-off-by: Zahari Doychev <zahari.doychev@linux.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nicolas Sugino authored
When using multiple capture cards, it might be necessary to identify a specific device with an ALSA one. If not, the order of the ALSA devices might have no relation to the id of the radio or video device. Signed-off-by: Nicolas Sugino <nsugino@3way.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrew Milkovich authored
This patch fixes the following sparse warnings: warning: ... may be used uninitialized in this function Some function variables have been initialized to 0. Signed-off-by: Andrew Milkovich <amilkovich@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 13 Sep, 2015 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.3-rc1 * tag 'v4.3-rc1': (11838 commits) Linux 4.3-rc1 blk: rq_data_dir() should not return a boolean writeback: plug writeback in wb_writeback() and writeback_inodes_wb() thermal: fix intel PCH thermal driver mismerge ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert Revert "writeback: plug writeback at a high level" scsi_dh: fix randconfig build error target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess ...
-
- 12 Sep, 2015 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/crisLinus Torvalds authored
Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
-
Linus Torvalds authored
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Fix up the writeback plugging introduced in commit d353d758 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
-
Linus Torvalds authored
We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625 ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <akpm@linux-foundation.org>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
-
Vineet Gupta authored
Newer bitfiles needs the reduced clk even for SMP builds Cc: <stable@vger.kernel.org> #4.2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug and documentation fixes, new device IDs, performance improvements, and adding a mailing list to MAINTAINERS for NTB" * tag 'ntb-4.3' of git://github.com/jonmason/ntb: NTB: Fix range check on memory window index NTB: Improve index handling in B2B MW workaround NTB: Fix documentation for ntb_peer_db_clear. NTB: Fix documentation for ntb_link_is_up NTB: Use unique DMA channels for TX and RX NTB: Remove dma_sync_wait from ntb_async_rx NTB: Clean up QP stats info NTB: Make the transport list in order of discovery NTB: Add PCI Device IDs for Broadwell Xeon NTB: Add flow control to the ntb_netdev NTB: Add list to MAINTAINERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. This introduces two brand new touchscreen drivers (Colibri and imx6ul_tsc), some small driver fixes, and we are no longer report errors from evdev_flush() as users do not really have a way of handling errors, error codes that we were returning were not on the list of errors supposed to be returned by close(), and errors were causing issues with one of older versions of systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_keypad - remove obsolete comment Input: touchscreen - add imx6ul_tsc driver support Input: Add touchscreen support for Colibri VF50 Input: i8042 - lower log level for "no controller" message Input: evdev - do not report errors form flush() Input: elants_i2c - extend the calibration timeout to 12 seconds Input: sparcspkr - fix module autoload for OF platform drivers Input: regulator-haptic - fix module autoload for OF platform driver Input: pwm-beeper - fix module autoload for OF platform driver Input: ab8500-ponkey - Fix module autoload for OF platform driver Input: cyttsp - remove unnecessary MODULE_ALIAS() Input: elan_i2c - add ACPI ID "ELAN1000"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previous PM+ACPI pull request (cpufreq core and drivers, cpuidle, generic power domains framework). Some of them didn't make to that pull request and some fix issues introduced by it. The only really new thing is the support for suspend frequency in the cpufreq-dt driver, but it is needed to fix an issue with Exynos platforms. Specifics: - build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck). - generic power domains framework fixes (power on error code path, subdomain removal) and cleanup of a deprecated API user (Geert Uytterhoeven, Jon Hunter, Ulf Hansson). - cpufreq-dt driver fixes including two fixes for bugs related to the new Operating Performance Points Device Tree bindings introduced recently (Viresh Kumar). - suspend frequency support for the cpufreq-dt driver (Bartlomiej Zolnierkiewicz, Viresh Kumar). - cpufreq core cleanups (Viresh Kumar). - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi). - additional sanity check in the cpuidle core (Xunlei Pang). - fix for a comment related to CPU power management (Lina Iyer)" * tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: fix PCT_TO_HWP macro intel_pstate: Fix user input of min/max to legal policy region PM / OPP: Return suspend_opp only if it is enabled cpufreq-dt: add suspend frequency support cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency PM / OPP: add dev_pm_opp_get_suspend_opp() helper staging: board: Migrate away from __pm_genpd_name_add_device() cpufreq: Use __func__ to print function's name cpufreq: staticize cpufreq_cpu_get_raw() PM / Domains: Ensure subdomain is not in use before removing cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL cpuidle/coupled: Add sanity check for safe_state_index PM / Domains: Try power off masters in error path of __pm_genpd_poweron() cpufreq: dt: Tolerance applies on both sides of target voltage cpufreq: dt: Print error on failing to mark OPPs as shared cpufreq: dt: Check OPP count before marking them shared kernel/cpu_pm: fix cpu_cluster_pm_exit comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target-pending updates for v4.3-rc1. Mostly bug-fixes and minor changes this round. The fallout from the big v4.2-rc1 RCU conversion have (thus far) been minimal. The highlights this round include: - Move sense handling routines into scsi_common code (Sagi) - Return ABORTED_COMMAND sense key for PI errors (Sagi) - Add tpg_enabled_sendtargets attribute for disabled iscsi-target discovery (David) - Shrink target struct se_cmd by rearranging fields (Roland) - Drop iSCSI use of mutex around max_cmd_sn increment (Roland) - Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy + Chris) - Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu + nab) - Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits) target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess target/qla2xxx: Honor max_data_sg_nents I/O transfer limit target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage target/iscsi: Replace conn->login_ip with login_sockaddr target/iscsi: Keep local_ip as the actual sockaddr target/iscsi: Fix np_ip bracket issue by removing np_ip target: Drop iSCSI use of mutex around max_cmd_sn increment qla2xxx: Update tcm_qla2xxx module description to 24xx+ iscsi-target: Add tpg_enabled_sendtargets for disabled discovery drivers: target: Drop unlikely before IS_ERR(_OR_NULL) target: check DPO/FUA usage for COMPARE AND WRITE target: Shrink struct se_cmd by rearranging fields target: Remove cmd->se_ordered_id (unused except debug log lines) target: add support for START_STOP_UNIT SCSI opcode target: improve unsupported opcode message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull second round of SCSI updates from James Bottomley: "There's one late arriving patch here (added today), fixing a build issue which the scsi_dh patch set in here uncovered. Other than that, everything has been incubated in -next and the checkers for a week. The major pieces of this patch are a set patches facilitating better integration between scsi and scsi_dh (the device handling layer used by multi-path; all the dm parts are acked by Mike Snitzer). This also includes driver updates for mp3sas, scsi_debug and an assortment of bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits) scsi_dh: fix randconfig build error scsi: fix scsi_error_handler vs. scsi_host_dev_release race fcoe: Convert use of __constant_htons to htons mpt2sas: setpci reset kernel oops fix pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2() bfa: Fix incorrect de-reference of pointer bfa: Fix indentation scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. scsi_debug: resp_request: remove unused variable scsi_debug: fix REPORT LUNS Well Known LU scsi_debug: schedule_resp fix input variable check scsi_debug: make dump_sector static scsi_debug: vfree is null safe so drop the check scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS; scsi_debug: define pr_fmt() for consistent logging mpt2sas: Refcount fw_events and fix unsafe list usage mpt2sas: Refcount sas_device objects and fix unsafe list usage scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate() scsi_dh: don't allow to detach device handlers at runtime ...
-
- 11 Sep, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: "A series of patches that move part of the code used to allocate memory from the media subsystem to the mm subsystem" [ The mm parts have been acked by VM people, and the series was apparently in -mm for a while - Linus ] * tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames() [media] media: vb2: Remove unused functions [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector [media] vb2: Provide helpers for mapping virtual addresses [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns() [media] mm: Provide new get_vaddr_frames() helper [media] vb2: Push mmap_sem down to memops
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds authored
Pull edac updates from Mauro Carvalho Chehab: "Two EDAC fixes for Intel systems (Haswell and Ivy Bridge)" * tag 'edac/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: correctly fetch DIMM width on Ivy Bridge and Haswell sb_edac: look harder for DDRIO on Haswell systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal updates from Zhang Rui: - use int instead of unsigned long to represent temperature to avoid bogus overheat detection when negative temperature reported. From Sascha Hauer. - export available thermal governors information to user space via sysfs. From Wei Ni. - introduce new thermal driver for Wildcat Point platform controller hub, which uses PCH thermal sensor and associated critical and hot trip points. From Tushar Dave. - add suuport for Intel Skylake and Denlow platforms in powerclamp driver. - some small cleanups in thermal core. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: Add Intel PCH thermal driver thermal: Add comment explaining test for critical temperature thermal: Use IS_ENABLED instead of #ifdef thermal: remove unnecessary call to thermal_zone_device_set_polling thermal: trivial: fix typo in comment thermal: consistently use int for temperatures thermal: add available policies sysfs attribute thermal/powerclamp: add cpu id for denlow platform thermal/powerclamp: add cpu id for Skylake u/y thermal/powerclamp: add cpu id for skylake h/s
-
Andrew Morton authored
Revert commit f83c7b5e ("ocfs2/dlm: use list_for_each_entry instead of list_for_each"). list_for_each_entry() will dereference its `pos' argument, which can be NULL in dlm_process_recovery_data(). Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-