- 13 Aug, 2013 2 commits
-
-
Daniel Borkmann authored
The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05Reported-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartlomiej Zolnierkiewicz authored
In stmmac_init_rx_buffers(): * add missing handling of dma_map_single() error * remove superfluous unlikely() optimization while at it Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs(). In init_dma_desc_rings(): * add missing handling of kmalloc_array() errors * fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors * make function return an error value on error and 0 on success In stmmac_open(): * add handling of init_dma_desc_rings() return value Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
- 12 Aug, 2013 3 commits
-
-
dingtianhong authored
We met lockdep warning when enable and disable the bearer for commands such as: tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0 tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0 --------------------------------------------------- [ 327.693595] ====================================================== [ 327.693994] [ INFO: possible circular locking dependency detected ] [ 327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G O [ 327.694882] ------------------------------------------------------- [ 327.695385] tipc-config/5825 is trying to acquire lock: [ 327.695754] (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0 [ 327.696018] [ 327.696018] but task is already holding lock: [ 327.696018] (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+ 0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] which lock already depends on the new lock. [ 327.696018] [ 327.696018] [ 327.696018] the existing dependency chain (in reverse order) is: [ 327.696018] [ 327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}: [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80 [ 327.696018] [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc] [ 327.696018] [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0 [ 327.696018] [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0 [ 327.696018] [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0 [ 327.696018] [<ffffffff81053a35>] irq_exit+0xd5/0xe0 [ 327.696018] [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60 [ 327.696018] [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80 [ 327.696018] [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30 [ 327.696018] [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280 [ 327.696018] [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20 [ 327.696018] [<ffffffff81031589>] start_secondary+0x89/0x90 [ 327.696018] [ 327.696018] -> #0 (((timer))#2){+.-...}: [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b [ 327.696018] [ 327.696018] other info that might help us debug this: [ 327.696018] [ 327.696018] Possible unsafe locking scenario: [ 327.696018] [ 327.696018] CPU0 CPU1 [ 327.696018] ---- ---- [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] [ 327.696018] *** DEADLOCK *** [ 327.696018] [ 327.696018] 5 locks held by tipc-config/5825: [ 327.696018] #0: (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40 [ 327.696018] #1: (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0 [ 327.696018] #2: (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc] [ 327.696018] #3: (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc] [ 327.696018] #4: (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] stack backtrace: [ 327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G O 3.11.0-rc3-wwd- default #4 [ 327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 327.696018] 00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000 [ 327.696018] ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8 [ 327.696018] ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318 [ 327.696018] Call Trace: [ 327.696018] [<ffffffff814d03dd>] dump_stack+0x4d/0xa0 [ 327.696018] [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120 [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffff81218783>] ? security_capable+0x13/0x20 [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e608>] ? genl_rcv+0x18/0x40 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b ----------------------------------------------------------------------- The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the work, so the dead lock occurs. We should unlock the b_ptr->lock when del the disc_timeout(). Remove link_timeout() still met the same problem, the patch: http://article.gmane.org/gmane.network.tipc.general/4380 fix the problem, so no need to send patch for fix link_timeout() deadlock warming. Signed-off-by:Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Stephane Grosjean authored
Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Eric Dumazet authored
Since commit ac4e4af1 ("macvtap: Consistently use rcu functions"), Thomas gets two different warnings : BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45891/45892 caller is macvtap_do_read+0x45c/0x600 [macvtap] CPU: 1 PID: 45892 Comm: vhost-45891 Not tainted 3.11.0-bisecttest #13 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bcec>] dump_stack+0x74/0xd8 [<0000000000481066>] debug_smp_processor_id+0xf6/0x114 [<000003ff802e9a18>] macvtap_do_read+0x45c/0x600 [macvtap] [<000003ff802e9c1c>] macvtap_recvmsg+0x60/0x88 [macvtap] [<000003ff80318c5e>] handle_rx+0x5b2/0x800 [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<00000000006934a6>] kernel_thread_starter+0x6/0xc [<00000000006934a0>] kernel_thread_starter+0x0/0xc And BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45897/45898 caller is macvlan_start_xmit+0x10a/0x1b4 [macvlan] CPU: 1 PID: 45898 Comm: vhost-45897 Not tainted 3.11.0-bisecttest #16 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bdb8>] dump_stack+0x74/0xd4 [<0000000000481132>] debug_smp_processor_id+0xf6/0x114 [<000003ff802b72ca>] macvlan_start_xmit+0x10a/0x1b4 [macvlan] [<000003ff802ea69a>] macvtap_get_user+0x982/0xbc4 [macvtap] [<000003ff802ea92a>] macvtap_sendmsg+0x4e/0x60 [macvtap] [<000003ff8031947c>] handle_tx+0x494/0x5ec [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<000000000069356e>] kernel_thread_starter+0x6/0xc [<0000000000693568>] kernel_thread_starter+0x0/0xc 2 locks held by vhost-45897/45898: #0: (&vq->mutex){+.+.+.}, at: [<000003ff8031903c>] handle_tx+0x54/0x5ec [vhost_net] #1: (rcu_read_lock){.+.+..}, at: [<000003ff802ea53c>] macvtap_get_user+0x824/0xbc4 [macvtap] In the first case, macvtap_put_user() calls macvlan_count_rx() in a preempt-able context, and this is not allowed. In the second case, macvtap_get_user() calls macvlan_start_xmit() with BH enabled, and this is not allowed. Reported-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Bisected-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
- 10 Aug, 2013 5 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included change: - reassign pointers to data after skb reallocation to avoid kernel paging errors Signed-off-by: -
Linus Lüssing authored
There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Antonio Quartulli <ordex@autistici.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: -
Yuchung Cheng authored
Currently the conntrack checks if the ending sequence of a packet falls within the observed receive window. However it does so even if it has not observe any packet from the remote yet and uses an uninitialized receive window (td_maxwin). If a connection uses Fast Open to send a SYN-data packet which is dropped afterward in the network. The subsequent SYNs retransmits will all fail this check and be discarded, leading to a connection timeout. This is because the SYN retransmit does not contain data payload so end == initial sequence number (isn) + 1 sender->td_end == isn + syn_data_len receiver->td_maxwin == 0 The fix is to only apply this check after td_maxwin is initialized. Reported-by:
Michael Chan <mcfchan@stanford.edu> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Sridhar Samudrala authored
Fix inverted check when deleting an fdb entry. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
- 09 Aug, 2013 7 commits
-
-
Byungho An authored
This patch fixed the condition of extend_desc for jumbo frame. There is no check routine for extend_desc in the stmmac_jumbo_frm function. Even though extend_desc is set if dma_tx is used instead of dma_etx. It causes kernel panic. Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Cong Wang authored
This is a regression introduced by: commit fe5c3561 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Jul 13 10:18:18 2013 -0700 vxlan: add necessary locking on device removal The problem is that vxlan_dellink(), which is called with RTNL lock held, tries to flush the workqueue synchronously, but apparently igmp_join and igmp_leave work need to hold RTNL lock too, therefore we have a soft lockup! As suggested by Stephen, probably the flush_workqueue can just be removed and let the normal refcounting work. The workqueue has a reference to device and socket, therefore the cleanups should work correctly. Suggested-by:
Stephen Hemminger <stephen@networkplumber.org> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Tested-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Cong Wang authored
This is a regression introduced by: commit 3fc2de2f Author: stephen hemminger <stephen@networkplumber.org> Date: Thu Jul 18 08:40:15 2013 -0700 vxlan: fix igmp races Before this commit, the old code was: if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) ip_mc_join_group(sk, &mreq); else ip_mc_leave_group(sk, &mreq); therefore we shoud check vxlan_group_used(), not its opposite, for igmp_join. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eliezer Tamir authored
Rename mib counter from "low latency" to "busy poll" v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer) Eric Dumazet suggested that the current location is better. So v2 just renames the counter to fit the new naming convention. Signed-off-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
-
Dave Jones authored
Introduced in cf3c4c03 ("8139cp: Add dma_mapping_error checking") Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Same behavior than 802.1q : finds the encapsulated protocol and skip 32bit header. Signed-off-by:
-
Timo Teräs authored
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
-
- 08 Aug, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== This is a batch of fixes intended for the 3.11 queue... Regarding the mac80211 (and related) bits, Johannes says: "I have a fix from Chris for an infinite loop along with fixes from myself to prevent it entering the loop to start with (continue using disabled channels, many thanks to Chris for his debug/test help) and a workaround for broken APs that advertise a bad HT primary channel in their beacons. Additionally, a fix for another attrbuf race in mac80211 and a fix to clean up properly while P2P GO interfaces go down." Along with that... Solomon Peachy corrects a range check in cw1200 that would lead to a BUG_ON when starting AP mode. Stanislaw Gruszka provides an iwl4965 patch to power-up the device earlier (avoiding microcode errors), and another iwl4965 fix that resets the firmware after turning rfkill off (resolving a bug in the Red Hat Bugzilla). Please let me know if there are problems! ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Hannes Frederic Sowa authored
In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by:
Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
- 07 Aug, 2013 3 commits
-
-
Eric Dumazet authored
While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by:
Van Jacobson <vanj@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Wang Sheng-Hui authored
br_sysfs_if.c is for sysfs attributes of bridge ports, while br_sysfs_br.c is for sysfs attributes of bridge itself. Correct the comment here. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 17a6e9f1 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by:
-
- 05 Aug, 2013 15 commits
-
-
Linus Lüssing authored
Currently we are reading an uninitialized value for the max_delay variable when snooping an MLD query message of invalid length and would update our timers with that. Fixing this by simply ignoring such broken MLD queries (just like we do for IGMP already). This is a regression introduced by: "bridge: disable snooping if there is no querier" (b00589af) Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Eric Dumazet authored
AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb00 ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Veaceslav Falico authored
Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by:
-
Daniel Borkmann authored
Commit 91657eaf ("xfrm: take net hdr len into account for esp payload size calculation") introduced a possible interger overflow in esp{4,6}_get_mtu() handlers in case of x->props.mode equals XFRM_MODE_TUNNEL. Thus, the following expression will overflow unsigned int net_adj; ... <case ipv{4,6} XFRM_MODE_TUNNEL> net_adj = 0; ... return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) - net_adj) & ~(align - 1)) + (net_adj - 2); where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned context. Fix it by simply removing brackets as those operations here do not need to have special precedence. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
-
nikolay@redhat.com authored
Vlan devices are LLTX and don't update their own trans_start, so if dev_trans_start has to be called with a vlan device then 0 or a stale value will be returned. Currently the bonding is the only such user, and it's needed for proper arp monitoring when the slaves are vlans. Fix this by extracting the vlan's real device trans_start. Suggested-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
-
nikolay@redhat.com authored
Sometimes we might have stacked vlans on top of each other, and we're interested in the first non-vlan real device on the path, so transform vlan_dev_real_dev to go over the stacked vlans and extract the first non-vlan device. Signed-off-by:
-
Solomon Peachy authored
There's an underlying race condition with the unjoin_work() call that is sometimes triggered depending on scheduling order and the phase of the moon. This doesn't fix the race condition, but it does remove the ill-advised BUG_ON() call in an easily-recoverable situation. Signed-off-by:
Solomon Peachy <pizza@shaftnet.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Julia Lawall authored
Drop the semicolon at the end of the list_for_each_entry loop header. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Eli Cohen authored
Remove this code, per Dave Miller's request, since it is not being used anywhere in the kernel. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit df8ef8f3 macvlan: add FDB bridge ops and macvlan flags added a flags field to macvlan, which can be controlled from userspace. The idea is to make the interface future-proof so we can add flags and not new fields. However, flags value isn't validated, as a result, userspace can't detect which flags are supported. Cc: "David S. Miller" <davem@davemloft.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Dan Carpenter authored
These structs have a "_pad" member. Also the "phw" structs have an 8 byte "hw_addr[]" array but sometimes only the first 6 bytes are initialized. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Stephen Hemminger authored
The following is needed as well to fix warning/error about shifting a 32 bit value 32 bits which occurs if building on 32 bit platform caused by conversion to using dma_addr_t Signed-off-by:
-
Eliezer Tamir authored
When renaming ll_poll to busy poll, I introduced a typo in the name of the do-nothing placeholder for sk_busy_loop and called it sk_busy_poll. This broke compile when busy poll was not configured. Cong Wang submitted a patch to fixed that. This patch removes the now redundant, misspelled placeholder. Signed-off-by:
-
stephen hemminger authored
This old driver never checked for DMA mapping errors. Causing splats with the new DMA mapping checks: WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x930() skge 0000:01:09.0: DMA-API: device driver failed to check map Add checks and unwind code. Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
-
- 03 Aug, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ... -
Himanshu Madhani authored
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
