- 23 Mar, 2019 28 commits
-
-
Tony Lindgren authored
[ Upstream commit 983a5a43 ] Commit 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer where we now try to reparent the clock to itself with the following: omap_dm_timer_of_set_source: failed to set parent With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. So we should be able to remove omap_dm_timer_of_set_source with clean-up patches later on. But for now, let's just fix it first by checking if parent and fck are the same and bail out of so. Fixes: 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-By:
Andreas Kemnade <andreas@kemnade.info> Tested-By:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shuming Fan authored
[ Upstream commit 8077ec01 ] AD/DA ASRC function control two ASRC clock sources separately. Whether AD/DA filter select which clock source, we enable AD/DA ASRC function for all cases. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit bb867d21 ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit aa331201 ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. Move the initialization channel->child = child; down to just before the call to imx_ldb_register so that intervening failures don't need to clear it. Add a label at the end of the function to do all the of_node_puts. The semantic patch that finds part of this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Alexander Shiyan authored
[ Upstream commit 2c0408dd ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit 4fb873c9 ] This patch fixes backtraces like the following when sending SIGKILL to a process with a currently pending plane update: [drm:ipu_plane_atomic_check] CRTC should be enabled [drm:drm_framebuffer_remove] *ERROR* failed to commit ------------[ cut here ]------------ WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498 atomic remove_fb failed with -22 Signed-off-by:
-
Zhang Zhijie authored
commit c1c214ad upstream. For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously updated in the operation. The new iv value should be written to device register by software. Reported-by:
Eric Biggers <ebiggers@google.com> Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Zhang Zhijie <zhangzj@rock-chips.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Zhijie authored
commit 4359669a upstream. In some cases, the nents of src scatterlist is different from dst scatterlist. So two variables are used to handle the nents of src&dst scatterlist. Reported-by:
-
Eric Biggers authored
commit 77568e53 upstream. Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and "michael_mic", fail the improved hash tests because they sometimes produce the wrong digest. The bug is that in the case where a scatterlist element crosses pages, not all the data is actually hashed because the scatterlist walk terminates too early. This happens because the 'nbytes' variable in crypto_hash_walk_done() is assigned the number of bytes remaining in the page, then later interpreted as the number of bytes remaining in the scatterlist element. Fix it. Fixes: 900a081f ("crypto: ahash - Fix early termination in hash walk") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 6c2e322b upstream. The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the source and destination, which has undefined behavior. It is unneeded because walk->iv is already used to hold the previous ciphertext block; thus, walk->iv is already updated to its final value. So, remove it. Also, note that in-place decryption is the only case where the previous ciphertext block is not directly available. Therefore, as a related cleanup I also updated crypto_cfb_encrypt_segment() to directly use the previous ciphertext block rather than save it into walk->iv. This makes it consistent with in-place encryption and out-of-place decryption; now only in-place decryption is different, because it has to be. Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Eric Biggers authored
commit 394a9e04 upstream. Like some other block cipher mode implementations, the CFB implementation assumes that while walking through the scatterlist, a partial block does not occur until the end. But the walk is incorrectly being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since CFB is a stream cipher) but no 'chunksize' is set. This bug causes incorrect encryption/decryption for some scatterlist layouts. Fix it by setting the 'chunksize'. Also extend the CFB test vectors to cover this bug as well as cases where the message length is not a multiple of the block size. Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 2b5ac174 upstream. For decryption in CBC mode we need to save the last ciphertext block for use as the next IV. However, we were trying to do this also with zero sized ciphertext resulting in a panic. Fix this by only doing the copy if the ciphertext length is at least of IV size. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gilad Ben-Yossef authored
commit c139c72e upstream. We were copying the last ciphertext block into the IV field for CBC before removing the DMA mapping of the output buffer with the result of the buffer sometime being out-of-sync cache wise and were getting intermittent cases of bad output IV. Fix it by moving the DMA buffer unmapping before the copy. Signed-off-by:
-
Hadar Gat authored
commit a4941195 upstream. In cc_unmap_aead_request(), call dma_pool_free() for mlli buffer only if an item is allocated from the pool and not always if there is a pool allocated. This fixes a kernel panic when trying to free a non-allocated item. Cc: stable@vger.kernel.org Signed-off-by:
Hadar Gat <hadar.gat@arm.com> Signed-off-by:
-
Horia Geantă authored
commit c19650d6 upstream. Roland reports the following issue and provides a root cause analysis: "On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a warning is generated when accessing files on a filesystem for which IMA measurement is enabled: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120 caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e] Modules linked in: CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24) [<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc) [<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108) [<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74) [<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120) [<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174) [<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0) [<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20) [<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80) [<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24) [<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40) [<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240) [<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8) [<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4) [<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364) [<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0) [<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0) [<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890) [<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c) [<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28) ---[ end trace 3455789a10e3aefd ]--- The cause is that the struct ahash_request *req is created as a stack-local variable up in the stack (presumably somewhere in the IMA implementation), then passed down into the CAAM driver, which tries to dma_single_map the req->result (indirectly via map_seq_out_ptr_result) in order to make that buffer available for the CAAM to store the result of the following hash operation. The calling code doesn't know how req will be used by the CAAM driver, and there could be other such occurrences where stack memory is passed down to the CAAM driver. Therefore we should rather fix this issue in the CAAM driver where the requirements are known." Fix this problem by: -instructing the crypto engine to write the final hash in state->caam_ctx -subsequently memcpy-ing the final hash into req->result Cc: <stable@vger.kernel.org> # v4.19+ Reported-by:
Roland Hieber <rhi@pengutronix.de> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Tested-by:
-
Pankaj Gupta authored
commit 42e95d1f upstream. when the source sg contains more than 1 fragment and destination sg contains 1 fragment, the caam driver mishandle the buffers to be sent to caam. Fixes: f2147b88 ("crypto: caam - Convert GCM to new AEAD interface") Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by:
Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by:
Arun Pathak <arun.pathak@nxp.com> Reviewed-by:
-
Gustavo A. R. Silva authored
commit b5be8531 upstream. Add missing break statement in order to prevent the code from falling through to case S_DIN_to_DES. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 63ee04c8 ("crypto: ccree - add skcipher support") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Franck LENORMAND authored
commit 65055e21 upstream. When driver started using state->caam_ctxt for storing both running hash and final hash, it was not updated to handle different DMA unmap lengths. Cc: <stable@vger.kernel.org> # v4.19+ Fixes: c19650d6 ("crypto: caam - fix DMA mapping of stack memory") Signed-off-by:
Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by:
-
Zhi Jin authored
commit a1d75dad upstream. There is a bug in the channel allocation logic that leads to an endless loop when looking for a contiguous range of channels in a range with a mixture of free and occupied channels. For example, opening three consequtive channels, closing the first two and requesting 4 channels in a row will trigger this soft lockup. The bug is that the search loop forgets to skip over the range once it detects that one channel in that range is occupied. Restore the original intent to the logic by fixing the omission. Signed-off-by:
Zhi Jin <zhi.jin@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Alexander Usyskin authored
commit b5958faa upstream. Fix unbalanced module reference counting during internal reset, which prevents the drivers unloading. Tracking mei_me/txe modules on mei client bus via mei_cldev_enable/disable is error prone due to possible internal reset flow, where clients are disconnected underneath. Moving reference counting to probe and release of mei bus client driver solves this issue in simplest way, as each client provides only a single connection to a client bus driver. Cc: <stable@vger.kernel.org> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
commit 37fd0b62 upstream. The list of supported functions can be altered upon link reset, clean the flags to allow correct selections of supported features. Cc: <stable@vger.kernel.org> v4.19+ Signed-off-by:
-
Krzysztof Kozlowski authored
commit 2ea8bab4 upstream. Fix NULL pointer exception on device unbind when device tree does not contain "has-touchscreen" property. In such case the input device is not registered so it should not be unregistered. $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000474 ... (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80) (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40) (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac) (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4) (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0) (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184) (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Codrin Ciubotariu authored
commit 05bd7fcd upstream. The ADCs are sleeping when the SLEEP bit is set and running when it's cleared, so the bit should be inverted. Tested on pcm1863. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Codrin Ciubotariu authored
commit fcf4daab upstream. According to DS, the gain is between -12 dB and 40 dB, with a 0.5 dB step. Tested on pcm1863. Signed-off-by:
-
S.j. Wang authored
commit cc29ea00 upstream. The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to wrong register, correct it. Fixes 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Ackedy-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
zhengbin authored
commit bb06c388 upstream. If msize is less than 4096, we should close and put trans, destroy tagpool, not just free client. This patch fixes that. Link: http://lkml.kernel.org/m/1552464097-142659-1-git-send-email-zhengbin13@huawei.com Cc: stable@vger.kernel.org Fixes: 574d356b ("9p/net: put a lower bound on msize") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Hou Tao authored
commit 5e3cc1ee upstream. Use inode->i_lock to protect i_size_write(), else i_size_read() in generic_fillattr() may loop infinitely in read_seqcount_begin() when multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl() simultaneously under 32-bit SMP environment, and a soft lockup will be triggered as show below: watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217] Modules linked in: CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4 Hardware name: Generic DT based system PC is at generic_fillattr+0x104/0x108 LR is at 0xec497f00 pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013 sp : ec497e20 ip : ed608030 fp : ec497e3c r10: 00000000 r9 : ec497f00 r8 : ed608030 r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780 r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: ac48006a DAC: 00000051 CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4 Hardware name: Generic DT based system Backtrace: [<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24) [<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc) [<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20) [<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8) [<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380) [<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0) [<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64) [<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c) [<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc) [<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48) [<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240) [<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44) [<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4) [<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88) [<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98) [<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4) [<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c) [<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48) [<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec) [<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78) [<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28) [dominique.martinet@cea.fr: updated comment to not refer to a function in another subsystem] Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com Cc: stable@vger.kernel.org Fixes: 7549ae3e ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.") Reported-by:
Xing Gaopeng <xingaopeng@huawei.com> Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Hans Verkuil authored
commit 5e99456c upstream. Userspace shouldn't set bytesused to 0 for output buffers. vb2_warn_zero_bytesused() warns about this (only once!), but it also calls WARN_ON(1), which is confusing since it is not immediately clear that it warns about a 0 value for bytesused. Just drop the WARN_ON as it serves no purpose. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Matthias Maennich <maennich@google.com> Signed-off-by:
-
- 19 Mar, 2019 12 commits
-
-
Greg Kroah-Hartman authored
-
Zha Bin authored
commit 7fbe078c upstream. The vsock core only supports 32bit CID, but the Virtio-vsock spec define CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as zero. This inconsistency causes one bug in vhost vsock driver. The scenarios is: 0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock object. And hash_min() is used to compute the hash key. hash_min() is defined as: (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)). That means the hash algorithm has dependency on the size of macro argument 'val'. 0. In function vhost_vsock_set_cid(), a 64bit CID is passed to hash_min() to compute the hash key when inserting a vsock object into the hash table. 0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min() to compute the hash key when looking up a vsock for an CID. Because the different size of the CID, hash_min() returns different hash key, thus fails to look up the vsock object for an CID. To fix this bug, we keep CID as u64 in the IOCTLs and virtio message headers, but explicitly convert u64 to u32 when deal with the hash table and vsock core. Fixes: 834e772c ("vhost/vsock: fix use-after-free in network stack callers") Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.texSigned-off-by:
Zha Bin <zhabin@linux.alibaba.com> Reviewed-by:
Liu Jiang <gerry@linux.alibaba.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Shengjing Zhu <i@zhsj.me> Signed-off-by:
-
Björn Töpel authored
commit cdec2141 upstream. When XDP is enabled, the driver will report incorrect statistics. Received frames will reported as transmitted frames. This commits fixes the i40e implementation of ndo_get_stats64 (struct net_device_ops), so that iproute2 will report correct statistics (e.g. when running "ip -stats link show dev eth0") even when XDP is enabled. Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Fixes: 74608d17 ("i40e: add support for XDP_TX action") Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Emeric Brun <ebrun@haproxy.com> Signed-off-by:
-
Gao Xiang authored
commit 51232df5 upstream. When the managed cache is enabled, the last reference count of a workgroup must be used for its workstation. Otherwise, it could lead to incorrect (un)freezes in the reclaim path, and it would be harmful. A typical race as follows: Thread 1 (In the reclaim path) Thread 2 workgroup_freeze(grp, 1) refcnt = 1 ... workgroup_unfreeze(grp, 1) refcnt = 1 workgroup_get(grp) refcnt = 2 (x) workgroup_put(grp) refcnt = 1 (x) ...unexpected behaviors * grp is detached but still used, which violates cache-managed freeze constraint. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Nicholas Kazlauskas authored
commit 25dc194b upstream. The prepare_fb call always happens on new_plane_state. The drm_atomic_helper_cleanup_planes checks to see if plane state pointer has changed when deciding to call cleanup_fb on either the new_plane_state or the old_plane_state. For a non-async atomic commit the state pointer is swapped, so this helper calls prepare_fb on the new_plane_state and cleanup_fb on the old_plane_state. This makes sense, since we want to prepare the framebuffer we are going to use and cleanup the the framebuffer we are no longer using. For the async atomic update helpers this differs. The async atomic update helpers perform in-place updates on the existing state. They call drm_atomic_helper_cleanup_planes but the state pointer is not swapped. This means that prepare_fb is called on the new_plane_state and cleanup_fb is called on the new_plane_state (not the old). In the case where old_plane_state->fb == new_plane_state->fb then there should be no behavioral difference between an async update and a non-async commit. But there are issues that arise when old_plane_state->fb != new_plane_state->fb. The first is that the new_plane_state->fb is immediately cleaned up after it has been prepared, so we're using a fb that we shouldn't be. The second occurs during a sequence of async atomic updates and non-async regular atomic commits. Suppose there are two framebuffers being interleaved in a double-buffering scenario, fb1 and fb2: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 We call cleanup_fb on fb2 twice in this example scenario, and any further use will result in use-after-free. The simple fix to this problem is to block framebuffer changes in the drm_atomic_helper_async_check function for now. v2: Move check by itself, add a FIXME (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Fixes: fef9df8b ("drm/atomic: initial support for asynchronous plane update") Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Xiao Ni authored
commit b761dcf1 upstream. In reshape_request it already adds len to sector_nr already. It's wrong to add len to sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data corruption. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
kbuild test robot authored
commit c634dc6b upstream. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06Signed-off-by:
-
Peter Zijlstra authored
commit ede271b0 upstream. Through: validate_event() x86_pmu.get_event_constraints(.idx=-1) tfa_get_event_constraints() dyn_constraint() cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access. In this case, simply skip the TFA constraint code, there is no event constraint with just PMC3, therefore the code will never result in the empty set. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by:
Tony Jones <tonyj@suse.com> Reported-by:
"DSouza, Nelson" <nelson.dsouza@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Jian-Hong Pan authored
commit cbc05fd6 upstream. The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c0ca5ece upstream. Dell Precision 5820 with ALC3234 codec (which is equivalent with ALC255) shows click noises at (runtime) PM resume on the headphone. The biggest source of the noise comes from the cleared headphone pin control at resume, which is done via the standard shutup procedure. Although we have an override of the standard shutup callback to replace with NOP, this would skip other needed stuff (e.g. the pull down of headset power). So, instead, this "fixes" the behavior of alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag. When this flag is set, Realtek codec won't call the standard snd_hda_shutup_pins() & co. Now alc_fixup_no_shutup() just sets this flag instead of overriding spec->shutup callback itself. This allows us to apply the similar fix for other entries easily if needed in future. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
commit 8bb37a2a upstream. The ASUS UX362FA with ALC294 cannot detect the headset MIC and outputs through the internal speaker and the headphone. This issue can be fixed by the quirk in the commit 4e051106 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294. Besides, ASUS UX362FA and UX533FD have the same audio initial pin config values. So, this patch replaces SND_PCI_QUIRK of UX533FD with a new SND_HDA_PIN_QUIRK which benefits both UX362FA and UX533FD. Fixes: 4e051106 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by:
Ming Shuo Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jaroslav Kysela authored
commit 167897f4 upstream. Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by:
Jeff Burrell <jeff.burrell@hp.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
