As suggested by David, udp6_csum_init() is too big to be inlined,
move it to ipv6 static library, net/ipv6/ip6_checksum.c.

And the generic csum_ipv6_magic() too.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adjusts some struct and functions, to prepare
for supporting IPv6.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following warning when building with W=1 option:

drivers/net/ethernet/freescale/fec.c:810:1: warning: '__inline__' is not at beginning of declaration [-Wold-style-declaration]

The inline declaration is pointless in this function, so just remove it.

While at it, also remove the other 'inline' declarations.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have skb_mac_header_was_set() helper to tell if mac_header
was set on a skb. We would like the same for transport_header.

__netif_receive_skb() doesn't reset the transport header if already
set by GRO layer.

Note that network stacks usually reset the transport header anyway,
after pulling the network header, so this change only allows
a followup patch to have more precise qdisc pkt_len computation
for GSO packets at ingress side.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Gortmaker says:

====================
I'd like to propose that we get rid of these old 8390 EISA drivers.
Of the five deleted here, I wrote four -- and while that doesn't give
me any authority for deletion above anyone else, it does at least
allow me to comment on the absolute absence of anyone reaching
out to the driver author for assistance in the last dozen years.

Eventually we'll probably get rid of EISA bus support, since in
x86, the hardware is close to 20 years old and already too resource
constrained to be useful today.  However there might still be
a few DEC Alpha enthusiasts with old EISA machines kept alive,
and so I expect we'll have to wait a bit longer to get unanimous
agreement to proceed with the full EISA removal (although I'd
love to be proven wrong on that).

Most of the DEC Alpha machines shipped in a PCI configuration, and
even the few that were EISA had DEC tulip based ethernet and no
reason to be needing the inferior 8390 technology.  So the interest
here for any possible DEC enthusiasts with EISA boxes about these
old 8390 drivers should be nil.

These really were rare cards -- in fact the smc-ultra32 is the only
one that I'd ever seen in person.  Even back in the mid 90's when
the drivers were written, I would guess that the user base was less
than 10 people across all of them.

The following patch was created with --irreversible-delete for
ease of review (it skips showing the content of files that are
deleted); however the complete patch can be pulled as per below.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to check if ethtool_ops == NULL since it can't be.
Use local variable "ops" in functions where it is present
instead of dev->ethtool_ops
Introduce local variable "ops" in functions where dev->ethtool_ops is used
many times.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this patch the SR-IOV code is segregated from the main bulk of
the bnx2x code. The CONFIG_BNX2X_SRIOV define is added to Broadcom's
Kconfig, and allows the elision of the building of all the SR-IOV
support code in the driver.
The define is dependant on the kernel CONFIG_PCI_IOV configuration
define.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report correct hardware stamping capability by ethtool interface.
The v1.0 ptp4l check it.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2681128f (veth: extend device features) added a NULL deref
in veth_stats_one(), as veth_get_stats64() was not testing if the peer
device was setup or not.

At init time, we call dev_get_stats() before veth pair is fully setup.

[  178.854758]  [<ffffffffa00f5677>] veth_get_stats64+0x47/0x70 [veth]
[  178.861013]  [<ffffffff814f0a2d>] dev_get_stats+0x6d/0x130
[  178.866486]  [<ffffffff81504efc>] rtnl_fill_ifinfo+0x47c/0x930
[  178.872299]  [<ffffffff81505b93>] rtmsg_ifinfo+0x83/0x100
[  178.877678]  [<ffffffff81505cc6>] rtnl_configure_link+0x76/0xa0
[  178.883580]  [<ffffffffa00f52fa>] veth_newlink+0x16a/0x350 [veth]
[  178.889654]  [<ffffffff815061cc>] rtnl_newlink+0x4dc/0x5e0
[  178.895128]  [<ffffffff81505e1e>] ? rtnl_newlink+0x12e/0x5e0
[  178.900769]  [<ffffffff8150587d>] rtnetlink_rcv_msg+0x11d/0x310
[  178.906669]  [<ffffffff81505760>] ? __rtnl_unlock+0x20/0x20
[  178.912225]  [<ffffffff81521f89>] netlink_rcv_skb+0xa9/0xd0
[  178.917779]  [<ffffffff81502d55>] rtnetlink_rcv+0x25/0x40
[  178.923159]  [<ffffffff815218d1>] netlink_unicast+0x1b1/0x230
[  178.928887]  [<ffffffff81521c4e>] netlink_sendmsg+0x2fe/0x3b0
[  178.934615]  [<ffffffff814dbe22>] sock_sendmsg+0xd2/0xf0

So we must check if peer was setup in veth_get_stats64()

As pointed out by Ben Hutchings, priv->peer is missing proper
synchronization. Adding RCU protection is a safe and well documented
way to make sure we don't access about to be freed or already
freed data.
Reported-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use more current logging styles.

Convert printks to pr_<level> and
printks with ("%s: ...", dev->name to netdev_<level>(dev, "...

Add pr_fmt #defines where appropriate.
Coalesce formats.
Use pr_<level>_once where appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NS8390 chip was essentially the 1st widespread PC ethernet
chip, starting its life on 8 bit ISA cards in the late 1980s.
Even with better technologies available (bus mastering etc)
the 8390 managed to get used on a few rare EISA cards in the
early to mid 1990s.

The EISA bus in the x86 world was largely confined to systems
ranging from 486 to 586 (essentially 200MHz or lower, and less
than 100MB RAM) -- i.e. machines unlikely to be still in service,
and even less likely to be running a 3.9+ kernel.

On top of that, only one of the five really ever was considered
non-experimental; the smc-ultra32 was the one -- since it was
largely just an EISA version of the popular smc-ultra ISA card.
All the others had such a tiny user base that they simply never
could be considered anything more than experimental.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

We threw away the microchannel support, but the removal wasn't
completely trivial since there was namespace overlap with the
machine check support, and hence some orphaned dependencies
survived the deletion.  This attempts to sweep those up and
send them to the bit-bucket.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fields must be null-terminated.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As per suggestion from Eric Dumazet this patch makes tcp_ecn sysctl
namespace aware.  The reason behind this patch is to ease the testing
of ecn problems on the internet and allows applications to tune their
own use of ecn.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

splice() can handle pages of any order, but network code tries hard to
split them in PAGE_SIZE units. Not quite successfully anyway, as
__splice_segment() assumed poff < PAGE_SIZE. This is true for
the skb->data part, not necessarily for the fragments.

This patch removes this logic to give the pages as they are in the skb.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use strlcpy where possible to ensure the string is \0 terminated.
Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN
and custom defines.
Use snprintf instead of sprint.
Remove unnecessary inits of ->fw_version
Remove unnecessary inits of drvinfo struct.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case user passed address via netlink during create, NET_ADDR_PERM was set.
That is not correct so fix this by setting NET_ADDR_SET.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function ethoc_set_mac_address() was incorrectly using passed pointer as
pointer to address, that is not correct.
Struct sockaddr have to be be used here.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit de0a4148 added Kconfig logic to
select HWMON and removed all the IS_ENABLED(CONFIG_HWMON) checks in the
tg3.c file. It missed this one check in the header.

Update version to 3.129 and update copyright year.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the code to detect PCI function number on 5717, 5719, and 5720.
If shared memory does not have proper signature, read the function number
from register directly.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Detect NVRAM types for 5762 and read OTP firmware version.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add basic support for 5762 which is a 57765_PLUS class device.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the size of skb allocated for NDISC is MAX_HEADER +
LL_RESERVED_SPACE(dev) + packet length + dev->needed_tailroom,
but only LL_RESERVED_SPACE(dev) bytes is "reserved" for headers.
As a result, the skb looks like this (after construction of the
message):

head       data                   tail                       end
+--------------------------------------------------------------+
+           |                      |          |                |
+--------------------------------------------------------------+
|<-hlen---->|<---ipv6 packet------>|<--tlen-->|<--MAX_HEADER-->|
    =LL_                               = dev
     RESERVED_                           ->needed_
     SPACE(dev)                            tailroom

As the name implies, "MAX_HEADER" is used for headers, and should
be "reserved" in prior to packet construction.  Or, if some space
is really required at the tail of ther skb, it should be
explicitly documented.

We have several option after construction of NDISC message:

Option 1:

head       data                   tail       end
+---------------------------------------------+
+           |                      |          |
+---------------------------------------------+
|<-hlen---->|<---ipv6 packet------>|<--tlen-->|
   =LL_                                = dev
    RESERVED_                           ->needed_
    SPACE(dev)                            tailroom

Option 2:

head            data                   tail       end
+--------------------------------------------------+
+                |                      |          |
+--------------------------------------------------+
|<--MAX_HEADER-->|<---ipv6 packet------>|<--tlen-->|
                                            = dev
                                             ->needed_
                                               tailroom

Option 3:

head                        data                   tail       end
+--------------------------------------------------------------+
+                |           |                      |          |
+--------------------------------------------------------------+
|<--MAX_HEADER-->|<-hlen---->|<---ipv6 packet------>|<--tlen-->|
                    =LL_                                = dev
                     RESERVED_                          ->needed_
                     SPACE(dev)                           tailroom

Our tunnel drivers try expanding headroom and the space for tunnel
encapsulation was not a mandatory space -- so we are not seeing
bugs here --, but just for optimization for performance critial
situations.

Since NDISC messages are not performance critical unlike TCP,
and as we know outgoing device, LL_RESERVED_SPACE(dev) should be
just enough for the device in most (if not all) cases:
  LL_RESERVED_SPACE(dev) <= LL_MAX_HEADER <= MAX_HEADER
Note that LL_RESERVED_SPACE(dev) is also enough for NDISC over
SIT (e.g., ISATAP).

So, I think Option 1 is just fine here.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MX6 and mx28 support enhanced DMA descriptor buff to support 1588
ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff.
Check fec type and choose correct DMA descriptor buff type.

Remove static config CONFIG_FEC_PTP.
ptp function will be auto detected.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sparse complains that:
drivers/net/ethernet/broadcom/tg3.c:5670:55: sparse: constant
0x7fffffffffffffff is so big it is long long (on x86/32 bit)

so we suffix the constant with LL in the header file.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables USB dynamic autosuspend for LAN9500A.  This
saves very little power in itself, but it allows power saving
in upstream hubs/hosts.

The earlier devices in this family (LAN9500/9512/9514) do not
support this feature.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register read/write functions already log a warning if
an access fails, so this patch removes the additional warnings
logged by callers that don't add any more information.

This patch makes the resulting driver smaller by not containing
as many warning strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
This is a V6 of a repost of my previous patchset:
"[patch net-next v2 00/15] net: introduce upper device lists and remove dev->master" from Aug 14

The discussion around
"[net-next] bonding: don't allow the master to become its slave"
forced me to think about upper<->lower device connections.

This patchset adds a possibility to record upper device linkage.
All upper<->lower devices are converted to use this mechanism right after.
That leads to dev->master removal because this info becomes redundant since
"master links" have the same value.

After all changes, there is no longer possible to do things as:
"bond->someotherdevice->samebond"

Also I think that drivers like cxgb3, qlcnic, qeth would benefit by this
in future by being able to get more appropriate info about l3 addresses.

v5->v6:
- netdev_has_upper_dev() - added statement to comment that this is looking at
  the immediate upper devices only.
- renamed "RTNL semaphore" -> "RTNL lock" in all comments
- renamed __netdev_has_upper_dev() to __netdev_search_upper_dev() to emhasize
  the difference to netdev_has_upper_dev()

v4->v5:
- fixed missed typo in drivers/infiniband/hw/nes/nes_cm.c

v3->v4:
- comments in __netdev_upper_dev_link() squashed into one line
- kfree_rcu used instead of call_rcu in netdev_upper_dev_unlink()

v2->v3:
- removed recursion in __netdev_has_upper_dev()
- refreshed bits to be applicable on current net-next

v1->v2:
- s/unique/master/ better naming + stays closer to the past
- fixed vlan err goto
- original patch 15 (WARN_ON change) is squashed into the first patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Nobody uses this now. Remove it.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from new upper dev list and free bonding from dev->master usage.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also, since all users call __vlan_find_dev_deep() with rcu_read_lock,
make no possibility to call this with rtnl mutex held only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also benefit from rcu_read_lock held and use __in_dev_get_rcu() in ipv4 case.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

rcu_read_lock was missing here
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>