- 31 Jul, 2024 31 commits
-
-
James Clark authored
The linked commit moved the early return on the first sample to before the verbose log, so move the log earlier too. Now the first sample is also logged and not skipped. Fixes: 2d98dbb4 ("perf scripts python arm-cs-trace-disasm.py: Do not ignore disam first sample") Reviewed-by:
Leo Yan <leo.yan@arm.com> Signed-off-by:
James Clark <james.clark@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: coresight@lists.linaro.org Cc: gankulkarni@os.amperecomputing.com Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ruidong Tian <tianruidong@linux.alibaba.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240723132858.12747-1-james.clark@linaro.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
James Clark authored
Normally exception packets don't directly output a branch sample, but if they're the last record in a buffer then they will. Because they don't have addresses set we'll see the placeholder value CS_ETM_INVAL_ADDR (0xdeadbeef) in the output. Since commit 6035b680 ("perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet") we've used 0 as an externally visible "not set" address value. For consistency reasons and to not make exceptions look like an error, change them to use 0 too. This is particularly visible when doing userspace only tracing because trace is disabled when jumping to the kernel, causing the flush and then forcing the last exception packet to be emitted as a branch. With kernel trace included, there is no flush so exception packets don't generate samples until the next range packet and they'll pick up the correct address. Before: $ perf record -e cs_etm//u -- stress -i 1 -t 1 $ perf script -F comm,ip,addr,flags stress syscall ffffb7eedbc0 => deadbeefdeadbeef stress syscall ffffb7f14a14 => deadbeefdeadbeef stress syscall ffffb7eedbc0 => deadbeefdeadbeef After: stress syscall ffffb7eedbc0 => 0 stress syscall ffffb7f14a14 => 0 stress syscall ffffb7eedbc0 => 0 Reviewed-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
-
Chen Ni authored
Replace a comma between expression statements by a semicolon. Reviewed-by:
Ian Rogers <irogers@google.com> Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240716075347.969041-1-nichen@iscas.ac.cnSigned-off-by:
-
Chen Ni authored
Replace a comma between expression statements by a semicolon. Reviewed-by:
-
Chen Ni authored
Replace a comma between expression statements by a semicolon. Reviewed-by:
-
Kajol Jain authored
Update JSON/events for power10 platform with additional events. Also move PM_VECTOR_LD_CMPL event from others.json to frontend.json file. Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Tested-by:
Disha Goel <disgoel@linux.ibm.com> Cc: Akanksha J N <akanksha@linux.ibm.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: hbathini@linux.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20240723052154.96202-1-kjain@linux.ibm.com [ Remove alternative to ' char that made the build break in some distros with a unicode parsing python error ] Signed-off-by:
-
Athira Rajeev authored
Since the "ins.name" is not set while using raw instruction, 'perf annotate' with insn-stat gives wrong data: Result from "./perf annotate --data-type --insn-stat": Annotate Instruction stats total 615, ok 419 (68.1%), bad 196 (31.9%) Name : Good Bad ----------------------------------------------------------- : 419 196 This patch sets "dl->ins.name" in arch specific function "check_ppc_insn" while initialising "struct disasm_line". Also update "ins_find" function to pass "struct disasm_line" as a parameter so as to set its name field in arch specific call. With the patch changes: Annotate Instruction stats total 609, ok 446 (73.2%), bad 163 (26.8%) Name/opcode : Good Bad ----------------------------------------------------------- 58 : 323 80 32 : 49 43 34 : 33 11 OP_31_XOP_LDX : 8 20 40 : 23 0 OP_31_XOP_LWARX : 5 1 OP_31_XOP_LWZX : 2 3 OP_31_XOP_LDARX : 3 0 33 : 0 2 OP_31_XOP_LBZX : 0 1 OP_31_XOP_LWAX : 0 1 OP_31_XOP_LHZX : 0 1 Reviewed-by:Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by:
-
Athira Rajeev authored
Now perf uses the capstone library to disassemble the instructions in x86. capstone is used (if available) for perf annotate to speed up. Currently it only supports x86 architecture. This patch includes changes to enable this in powerpc. For now, only for data type sort keys, this method is used and only binary code (raw instruction) is read. This is because powerpc approach to understand instructions and reg fields uses raw instruction. The "cs_disasm" is currently not enabled. While attempting to do cs_disasm, observation is that some of the instructions were not identified (ex: extswsli, maddld) and it had to fallback to use objdump. Hence enabling "cs_disasm" is added in comment section as a TODO for powerpc. Reviewed-by:
-
Athira Rajeev authored
capstone_init is made availbale for all archs to use and updated to enable support for CS_ARCH_PPC as well. Patch removes open_capstone_handle and uses capstone_init in all the places. Committer notes: Avoid including capstone/capstone.h from print_insn.h to not break the build in builtin-script.c due to the namespace clash with libbpf: /usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag Reviewed-by:
-
Athira Rajeev authored
symbol__disassemble_capstone in util/disasm.c calls function open_capstone_handle to open/init the capstone. We already have a capstone_init function in "util/print_insn.c". But capstone_init is defined as a static function in util/print_insn.c. Change this and also add the function in print_insn.h The open_capstone_handle checks the disassembler_style option from annotation_options to decide whether to set CS_OPT_SYNTAX_ATT. Add that logic in capstone_init also and by default set it to true. Reviewed-by:
-
Athira Rajeev authored
Add instruction tracking function "update_insn_state_powerpc" for powerpc. Example sequence in powerpc: ld r10,264(r3) mr r31,r3 <<after some sequence> ld r9,312(r31) Consider ithe sample is pointing to: "ld r9,312(r31)". Here the memory reference is hit at "312(r31)" where 312 is the offset and r31 is the source register. Previous instruction sequence shows that register state of r3 is moved to r31. So to identify the data type for r31 access, the previous instruction ("mr") needs to be tracked and the state type entry has to be updated. Current instruction tracking support in perf tools infrastructure is specific to x86. Patch adds this support for powerpc as well. Reviewed-by: -
Athira Rajeev authored
Add few more instructions and use opcode as search key to find if it is supported by the architecture. The added ones are: addi, addic, addic., addis, subfic and mulli Reviewed-by:
-
Athira Rajeev authored
Data-type profiling has the concept of instruction tracking. Example sequence in powerpc: ld r10,264(r3) mr r31,r3 <<after some sequence> ld r9,312(r31) or differently lwz r10,264(r3) add r31, r3, RB lwz r9, 0(r31) If a sample is hit at "lwz r9, 0(r31)", data type of r31 depends on previous instruction sequence here. So to track the previous instructions, patch adds changes to identify some of the arithmetic instructions which are having opcode as 31. Since memory instructions also has cases with opcode 31, use the bits 22:30 to filter the arithmetic instructions here. Also there are instructions with just two operands like "addme", "addze". This patch adds new instructions ops "arithmetic_ops" to handle this Reviewed-by:
-
Athira Rajeev authored
There are memory instructions in powerpc with opcode as 31. Example: "ldx RT,RA,RB" , Its X form is as below: ______________________________________ | 31 | RT | RA | RB | 21 |/| -------------------------------------- 0 6 11 16 21 30 31 The opcode for "ldx" is 31. There are other instructions also with opcode 31 which are memory insn like ldux, stbx, lwzx, lhaux But all instructions with opcode 31 are not memory. Example is add instruction: "add RT,RA,RB" The value in bit 21-30 [ 21 for ldx ] is different for these instructions. Patch uses this value to assign instruction ops for these cases. The naming convention and value to identify these are picked from defines in "arch/powerpc/include/asm/ppc-opcode.h" Reviewed-by:
-
Athira Rajeev authored
Use the raw instruction code and macros to identify memory instructions, extract register fields and also offset. The implementation addresses the D-form, X-form, DS-form instructions. Two main functions are added. New parse function "load_store__parse" as instruction ops parser for memory instructions. Unlike other parsers (like mov__parse), this one fills in the "multi_regs" field for source/target and new added "mem_ref" field. No other fields are set because, here there is no need to parse the disassembled code and arch specific macros will take care of extracting offset and regs which is easier and will be precise. In powerpc, all instructions with a primary opcode from 32 to 63 are memory instructions. Update "ins__find" function to have "raw_insn" also as a parameter. Reviewed-by:
-
Athira Rajeev authored
Use the raw instruction code and macros to identify memory instructions, extract register fields and also offset. The implementation addresses the D-form, X-form, DS-form instructions. Adds "mem_ref" field to check whether source/target has memory reference. Add function "get_powerpc_regs" which will set these fields: reg1, reg2, offset depending of where it is source or target ops. Update "parse" callback for "struct ins_ops" to also pass "struct disasm_line" as argument. This is needed in parse functions where opcode is used to determine whether to set multi_regs and other fields Reviewed-by:
-
Athira Rajeev authored
perf annotate: Add support to capture and parse raw instruction in powerpc using dso__data_read_offset utility Add support to capture and parse raw instruction in powerpc. Currently, the perf tool infrastructure uses two ways to disassemble and understand the instruction. One is objdump and other option is via libcapstone. Currently, the perf tool infrastructure uses "--no-show-raw-insn" option with "objdump" while disassemble. Example from powerpc with this option for an instruction address is: Snippet from: objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux> c0000000010224b4: lwz r10,0(r9) This line "lwz r10,0(r9)" is parsed to extract instruction name, registers names and offset. Also to find whether there is a memory reference in the operands, "memory_ref_char" field of objdump is used. For x86, "(" is used as memory_ref_char to tackle instructions of the form "mov (%rax), %rcx". In case of powerpc, not all instructions using "(" are the only memory instructions. Example, above instruction can also be of extended form (X form) "lwzx r10,0,r19". Inorder to easy identify the instruction category and extract the source/target registers, patch adds support to use raw instruction for powerpc. Approach used is to read the raw instruction directly from the DSO file using "dso__data_read_offset" utility which is already implemented in perf infrastructure in "util/dso.c". Example: 38 01 81 e8 ld r4,312(r1) Here "38 01 81 e8" is the raw instruction representation. In powerpc, this translates to instruction form: "ld RT,DS(RA)" and binary code as: | 58 | RT | RA | DS | | ------------------------------------- 0 6 11 16 30 31 Function "symbol__disassemble_dso" is updated to read raw instruction directly from DSO using dso__data_read_offset utility. In case of above example, this captures: line: 38 01 81 e8 The above works well when 'perf report' is invoked with only sort keys for data type ie type and typeoff. Because there is no instruction level annotation needed if only data type information is requested for. For annotating sample, along with type and typeoff sort key, "sym" sort key is also needed. And by default invoking just "perf report" uses sort key "sym" that displays the symbol information. With approach changes in powerpc which first reads DSO for raw instruction, "perf annotate" and "perf report" + a key breaks since it doesn't do the instruction level disassembly. Snippet of result from 'perf report': Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238 do_work /usr/bin/pmlogger [Percent: local period] Percent│ ea230010 │ 3a550010 │ 3a600000 │ 38f60001 │ 39490008 │ 42400438 51.44 │ 81290008 │ 7d485378 Here, raw instruction is displayed in the output instead of human readable annotated form. One way to get the appropriate data is to specify "--objdump path", by which code annotation will be done. But the default behaviour will be changed. To fix this breakage, check if "sym" sort key is set. If so fallback and use the libcapstone/objdump way of disassmbling the sample. With the changes and "perf report" Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238 do_work /usr/bin/pmlogger [Percent: local period] Percent│ ld r17,16(r3) │ addi r18,r21,16 │ li r19,0 │ 8b0: rldicl r10,r10,63,33 │ addi r10,r10,1 │ mtctr r10 │ ↓ b 8e4 │ 8c0: addi r7,r22,1 │ addi r10,r9,8 │ ↓ bdz d00 51.44 │ lwz r9,8(r9) │ mr r8,r10 │ cmpw r20,r9 Committer notes: Just add the extern for 'sort_order' in disasm.c so that we don't end up breaking the build due to this type colision with capstone and libbpf: In file included from /usr/include/capstone/capstone.h:325, from /git/perf-6.10.0/tools/perf/util/print_insn.h:23, from builtin-script.c:38: /usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag 94 | typedef enum bpf_insn { I reported this to the bpf mailing list, see one of the links below. Reviewed-by: -
Athira Rajeev authored
Currently, the perf tool infrastructure uses the disasm_line__parse function to parse disassembled line. Example snippet from objdump: objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux> c0000000010224b4: lwz r10,0(r9) This line "lwz r10,0(r9)" is parsed to extract instruction name, registers names and offset. In powerpc, the approach for data type profiling uses raw instruction instead of result from objdump to identify the instruction category and extract the source/target registers. Example: 38 01 81 e8 ld r4,312(r1) Here "38 01 81 e8" is the raw instruction representation. Add function "disasm_line__parse_powerpc" to handle parsing of raw instruction. Also update "struct disasm_line" to save the binary code/ With the change, function captures: line -> "38 01 81 e8 ld r4,312(r1)" raw instruction "38 01 81 e8" Raw instruction is used later to extract the reg/offset fields. Macros are added to extract opcode and register fields. "struct disasm_line" is updated to carry union of "bytes" and "raw_insn" of 32 bit to carry raw code (raw). Function "disasm_line__parse_powerpc fills the raw instruction hex value and can use macros to get opcode. There is no changes in existing code paths, which parses the disassembled code. The size of raw instruction depends on architecture. In case of powerpc, the parsing the disasm line needs to handle cases for reading binary code directly from DSO as well as parsing the objdump result. Hence adding the logic into separate function instead of updating "disasm_line__parse". The architecture using the instruction name and present approach is not altered. Since this approach targets powerpc, the macro implementation is added for powerpc as of now. Since the disasm_line__parse is used in other cases (perf annotate) and not only data tye profiling, the powerpc callback includes changes to work with binary code as well as mnemonic representation. Also in case if the DSO read fails and libcapstone is not supported, the approach fallback to use objdump as option. Hence as option, patch has changes to ensure objdump option also works well. Reviewed-by:
-
Athira Rajeev authored
TYPE_STATE_MAX_REGS is arch-dependent. Currently this is defined to be 16. While checking if reg is valid using has_reg_type, max value is checked using TYPE_STATE_MAX_REGS value. Define this conditionally for powerpc. Reviewed-by:
-
Athira Rajeev authored
perf annotate: Add "update_insn_state" callback function to handle arch specific instruction tracking Add "update_insn_state" callback to "struct arch" to handle instruction tracking. Currently updating instruction state is handled by static function "update_insn_state_x86" which is defined in "annotate-data.c". Make this as a callback for specific arch and move to archs specific file "arch/x86/annotate/instructions.c" . This will help to add helper function for other platforms in file: "arch/<platform>/annotate/instructions.c" and make changes/updates easier. Define callback "update_insn_state" as part of "struct arch", also make some of the debug functions non-static so that it can be referenced from other places. Reviewed-by:
-
Athira Rajeev authored
Data type profiling uses instruction tracking by checking each instruction and updating the register type state in some data structures. This is useful to find the data type in cases when the register state gets transferred from one reg to another. Example, in x86, "mov" instruction and in powerpc, "mr" instruction. Currently these structures are defined in annotate-data.c and instruction tracking is implemented only for x86. Move these data structures to "annotate-data.h" header file so that other arch implementations can use it in arch specific files as well. Reviewed-by:
-
Ian Rogers authored
Leak sanitizer will report memory leaks from python and the leak sanitizer output causes tests to fail. For example: ``` $ perf test 98 -v 98: perf script tests: --- start --- test child forked, pid 1272962 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.046 MB /tmp/perf-test-script.x0EktdCel8/perf.data (8 samples) ] call_path_table((1, 0, 0, 0) call_path_table((2, 1, 0, 140339508617447) call_path_table((3, 2, 2, 0) call_path_table((4, 3, 3, 0) call_path_table((5, 4, 4, 0) call_path_table((6, 5, 5, 0) call_path_table((7, 6, 6, 0) call_path_table((8, 7, 7, 0) call_path_table((9, 8, 8, 0) call_path_table((10, 9, 9, 0) call_path_table((11, 10, 10, 0) call_path_table((12, 11, 11, 0) call_path_table((13, 12, 1, 0) sample_table((1, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954119000, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((2, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954137053, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((3, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954140089, -1, 0, 0, 0, 0, 9, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((4, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954142376, -1, 0, 0, 0, 0, 155, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((5, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954144045, -1, 0, 0, 0, 0, 2493, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((6, 1, 1, 1, 1, 1, 12, 77, -2046828595, 588306954145722, -1, 0, 0, 0, 0, 47555, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) call_path_table((14, 9, 14, 0) call_path_table((15, 14, 15, 0) call_path_table((16, 15, 0, -1040969624) call_path_table((17, 16, 16, 0) call_path_table((18, 17, 17, 0) call_path_table((19, 18, 18, 0) call_path_table((20, 19, 19, 0) call_path_table((21, 20, 13, 0) sample_table((7, 1, 1, 1, 2, 1, 13, 46, -2053700898, 588306954157436, -1, 0, 0, 0, 0, 964078, 0, 0, 128933429281, 0, 0, 21, 0, 0, 0, -1, -1)) call_path_table((22, 1, 21, 0) call_path_table((23, 22, 22, 0) call_path_table((24, 23, 23, 0) call_path_table((25, 24, 24, 0) call_path_table((26, 25, 25, 0) call_path_table((27, 26, 26, 0) call_path_table((28, 27, 27, 0) call_path_table((29, 28, 28, 0) call_path_table((30, 29, 29, 0) call_path_table((31, 30, 30, 0) call_path_table((32, 31, 31, 0) call_path_table((33, 32, 32, 0) call_path_table((34, 33, 33, 0) call_path_table((35, 34, 20, 0) sample_table((8, 1, 1, 1, 2, 1, 20, 49, -2046878127, 588306954378624, -1, 0, 0, 0, 0, 2534317, 0, 0, 128933429281, 0, 0, 35, 0, 0, 0, -1, -1)) ================================================================= ==1272975==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13628 byte(s) in 6 object(s) allocated from: #0 0x56354f60c092 in malloc (/tmp/perf/perf+0x29c092) #1 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:2003:11 #2 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:1996:1 SUMMARY: AddressSanitizer: 13628 byte(s) leaked in 6 allocation(s). --- Cleaning up --- ---- end(-1) ---- 98: perf script tests : FAILED! ``` Disable leak sanitizer when running specific perf+python tests to avoid this. This causes the tests to pass when run with leak sanitizer. Reviewed-by:Aditya Gupta <adityag@linux.ibm.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This is to pave the way for other BTF types, i.e. we try to find BTF type then use things like btf_is_enum(btf_type) that we cached to find the right strtoul and scnprintf routines. For now only enum is supported, all the other types simple return zero for scnprintf which makes it have the same behaviour as when BTF isn't available, i.e. fallback to no pretty printing. Ditto for strtoul. root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# Signed-off-by:
Howard Chu <howardchu95@gmail.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
To have a central place that will look at the BTF type and call the right scnprintf routine or return zero, meaning BTF pretty printing isn't available or not implemented for a specific type. Signed-off-by:
-
Howard Chu authored
Trace landlock_add_rule syscall to see if the output is desirable. Trace the non-syscall tracepoint 'timer:hrtimer_init' and 'timer:hrtimer_start', see if the 'mode' argument is augmented, the 'mode' enum argument has the prefix of 'HRTIMER_MODE_' in its name. Committer testing: root@x1:~# perf test enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf test -v enum 124: perf trace enum augmentation tests : Ok root@x1:~# perf trace -e landlock_add_rule perf test -v enum 0.000 ( 0.010 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd324171d4, flags: 45) = -1 EINVAL (Invalid argument) 0.012 ( 0.002 ms): perf/749827 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd324171e0, flags: 45) = -1 EINVAL (Invalid argument) 457.821 ( 0.007 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd4acd31e4, flags: 45) = -1 EINVAL (Invalid argument) 457.832 ( 0.003 ms): perf/749830 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd4acd31f0, flags: 45) = -1 EINVAL (Invalid argument) 124: perf trace enum augmentation tests : Ok root@x1:~# Suggested-by:Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
-
Howard Chu authored
We'll use it to add a regression test for the BTF augmentation of enum arguments for tracepoints in 'perf trace': root@x1:~# perf trace -e landlock_add_rule perf test -w landlock 0.000 ( 0.009 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd8e258594, flags: 45) = -1 EINVAL (Invalid argument) 0.011 ( 0.002 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd8e2585a0, flags: 45) = -1 EINVAL (Invalid argument) root@x1:~# Committer notes: It was agreed on the discussion (see Link below) to shorten then name of the workload from 'landlock_add_rule' to 'landlock', and I moved it to a separate patch. Also, to address a build failure from Namhyung, I stopped loading linux/landlock.h and instead added the used defines, enums and types to make this build in older systems. All we want is to emit the syscall and intercept it. Suggested-by: -
Howard Chu authored
Before: perf $ ./perf trace -e timer:hrtimer_start --filter='mode!=HRTIMER_MODE_ABS_PINNED_HARD' --max-events=1 No resolver (strtoul) for "mode" in "timer:hrtimer_start", can't set filter "(mode!=HRTIMER_MODE_ABS_PINNED_HARD) && (common_pid != 281988)" After: perf $ ./perf trace -e timer:hrtimer_start --filter='mode!=HRTIMER_MODE_ABS_PINNED_HARD' --max-events=1 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12351248764875, softexpires: 12351248764875, mode: HRTIMER_MODE_ABS) && and ||: perf $ ./perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS_PINNED_HARD && mode != HRTIMER_MODE_ABS' --max-events=1 0.000 Hyprland/534 timer:hrtimer_start(hrtimer: 0xffff9497801a84d0, function: 0xffffffffc04cdbe0, expires: 12639434638458, softexpires: 12639433638458, mode: HRTIMER_MODE_REL) perf $ ./perf trace -e timer:hrtimer_start --filter='mode == HRTIMER_MODE_REL || mode == HRTIMER_MODE_PINNED' --max-events=1 0.000 ldlck-test/60639 timer:hrtimer_start(hrtimer: 0xffffb16404ee7bf8, function: 0xffffffffa7790420, expires: 12772614418016, softexpires: 12772614368016, mode: HRTIMER_MODE_REL) Switching it up, using both enum name and integer value(--filter='mode == HRTIMER_MODE_ABS_PINNED_HARD || mode == 0'): perf $ ./perf trace -e timer:hrtimer_start --filter='mode == HRTIMER_MODE_ABS_PINNED_HARD || mode == 0' --max-events=3 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12601748739825, softexpires: 12601748739825, mode: HRTIMER_MODE_ABS_PINNED_HARD) 0.036 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 12518758748124, softexpires: 12518758748124, mode: HRTIMER_MODE_ABS_PINNED_HARD) 0.172 tmux: server/41881 timer:hrtimer_start(hrtimer: 0xffffb164081e7838, function: 0xffffffffa7790420, expires: 12518768255836, softexpires: 12518768205836, mode: HRTIMER_MODE_ABS) P.S. perf $ pahole hrtimer_mode enum hrtimer_mode { HRTIMER_MODE_ABS = 0, HRTIMER_MODE_REL = 1, HRTIMER_MODE_PINNED = 2, HRTIMER_MODE_SOFT = 4, HRTIMER_MODE_HARD = 8, HRTIMER_MODE_ABS_PINNED = 2, HRTIMER_MODE_REL_PINNED = 3, HRTIMER_MODE_ABS_SOFT = 4, HRTIMER_MODE_REL_SOFT = 5, HRTIMER_MODE_ABS_PINNED_SOFT = 6, HRTIMER_MODE_REL_PINNED_SOFT = 7, HRTIMER_MODE_ABS_HARD = 8, HRTIMER_MODE_REL_HARD = 9, HRTIMER_MODE_ABS_PINNED_HARD = 10, HRTIMER_MODE_REL_PINNED_HARD = 11, }; Committer testing: root@x1:~# perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS' --max-events=2 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff2a5050, function: 0xffffffff9e22ddd0, expires: 241502326000000, softexpires: 241502326000000, mode: HRTIMER_MODE_ABS_PINNED_HARD) 18446744073709.488 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff425050, function: 0xffffffff9e22ddd0, expires: 241501814000000, softexpires: 241501814000000, mode: HRTIMER_MODE_ABS_PINNED_HARD) root@x1:~# perf trace -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS && mode != HRTIMER_MODE_ABS_PINNED_HARD' --max-events=2 0.000 podman/510644 timer:hrtimer_start(hrtimer: 0xffffa2024f5f7dd0, function: 0xffffffff9e2170c0, expires: 241530497418194, softexpires: 241530497368194, mode: HRTIMER_MODE_REL) 40.251 gnome-shell/2484 timer:hrtimer_start(hrtimer: 0xffff8d48bda17650, function: 0xffffffffc0661550, expires: 241550528619247, softexpires: 241550527619247, mode: HRTIMER_MODE_REL) root@x1:~# perf trace -v -e timer:hrtimer_start --filter='mode != HRTIMER_MODE_ABS && mode != HRTIMER_MODE_ABS_PINNED_HARD && mode != HRTIMER_MODE_REL' --max-events=2 Using CPUID GenuineIntel-6-BA-3 vmlinux BTF loaded <SNIP> 0 0xa 0x1 New filter for timer:hrtimer_start: (mode != 0 && mode != 0xa && mode != 0x1) && (common_pid != 524049 && common_pid != 4041) mmap size 528384B ^Croot@x1:~# Suggested-by: -
Howard Chu authored
Before: perf $ ./perf trace -e timer:hrtimer_start --max-events=1 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff974466c25f18, function: 0xffffffff89da5be0, expires: 377432432256753, softexpires: 377432432256753, mode: 10) After: perf $ ./perf trace -e timer:hrtimer_start --max-events=1 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 4382442895089, softexpires: 4382442895089, mode: HRTIMER_MODE_ABS_PINNED_HARD) in which HRTIMER_MODE_ABS_PINNED_HARD is: perf $ pahole hrtimer_mode enum hrtimer_mode { HRTIMER_MODE_ABS = 0, HRTIMER_MODE_REL = 1, HRTIMER_MODE_PINNED = 2, HRTIMER_MODE_SOFT = 4, HRTIMER_MODE_HARD = 8, HRTIMER_MODE_ABS_PINNED = 2, HRTIMER_MODE_REL_PINNED = 3, HRTIMER_MODE_ABS_SOFT = 4, HRTIMER_MODE_REL_SOFT = 5, HRTIMER_MODE_ABS_PINNED_SOFT = 6, HRTIMER_MODE_REL_PINNED_SOFT = 7, HRTIMER_MODE_ABS_HARD = 8, HRTIMER_MODE_REL_HARD = 9, HRTIMER_MODE_ABS_PINNED_HARD = 10, HRTIMER_MODE_REL_PINNED_HARD = 11, }; Can also be tested by ./perf trace -e pagemap:mm_lru_insertion,timer:hrtimer_start,timer:hrtimer_init,skb:kfree_skb --max-events=10 (Chose these 4 events because they happen quite frequently.) However some enum arguments may not be contained in vmlinux BTF. To see what enum arguments are supported, use: vmlinux_dir $ bpftool btf dump file /sys/kernel/btf/vmlinux > vmlinux vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g" dev_pm_qos_req_type error_detector hrtimer_mode i2c_slave_event ieee80211_bss_type lru_list migrate_mode nl80211_auth_type nl80211_band nl80211_iftype numa_vmaskip_reason pm_qos_req_action pwm_polarity skb_drop_reason thermal_trip_type xen_lazy_mode xen_mc_extend_args xen_mc_flush_reason zone_type And what tracepoints have these enum types as their arguments: vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g" > good_enums vmlinux_dir $ cat good_enums dev_pm_qos_req_type error_detector hrtimer_mode i2c_slave_event ieee80211_bss_type lru_list migrate_mode nl80211_auth_type nl80211_band nl80211_iftype numa_vmaskip_reason pm_qos_req_action pwm_polarity skb_drop_reason thermal_trip_type xen_lazy_mode xen_mc_extend_args xen_mc_flush_reason zone_type vmlinux_dir $ grep -f good_enums -l /sys/kernel/tracing/events/*/*/format /sys/kernel/tracing/events/cfg80211/cfg80211_chandef_dfs_required/format /sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_notify/format /sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_started_notify/format /sys/kernel/tracing/events/cfg80211/cfg80211_get_bss/format /sys/kernel/tracing/events/cfg80211/cfg80211_ibss_joined/format /sys/kernel/tracing/events/cfg80211/cfg80211_inform_bss_frame/format /sys/kernel/tracing/events/cfg80211/cfg80211_radar_event/format /sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel_expired/format /sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel/format /sys/kernel/tracing/events/cfg80211/cfg80211_reg_can_beacon/format /sys/kernel/tracing/events/cfg80211/cfg80211_return_bss/format /sys/kernel/tracing/events/cfg80211/cfg80211_tx_mgmt_expired/format /sys/kernel/tracing/events/cfg80211/rdev_add_virtual_intf/format /sys/kernel/tracing/events/cfg80211/rdev_auth/format /sys/kernel/tracing/events/cfg80211/rdev_change_virtual_intf/format /sys/kernel/tracing/events/cfg80211/rdev_channel_switch/format /sys/kernel/tracing/events/cfg80211/rdev_connect/format /sys/kernel/tracing/events/cfg80211/rdev_inform_bss/format /sys/kernel/tracing/events/cfg80211/rdev_libertas_set_mesh_channel/format /sys/kernel/tracing/events/cfg80211/rdev_mgmt_tx/format /sys/kernel/tracing/events/cfg80211/rdev_remain_on_channel/format /sys/kernel/tracing/events/cfg80211/rdev_return_chandef/format /sys/kernel/tracing/events/cfg80211/rdev_return_int_survey_info/format /sys/kernel/tracing/events/cfg80211/rdev_set_ap_chanwidth/format /sys/kernel/tracing/events/cfg80211/rdev_set_monitor_channel/format /sys/kernel/tracing/events/cfg80211/rdev_set_radar_background/format /sys/kernel/tracing/events/cfg80211/rdev_start_ap/format /sys/kernel/tracing/events/cfg80211/rdev_start_radar_detection/format /sys/kernel/tracing/events/cfg80211/rdev_tdls_channel_switch/format /sys/kernel/tracing/events/compaction/mm_compaction_defer_compaction/format /sys/kernel/tracing/events/compaction/mm_compaction_deferred/format /sys/kernel/tracing/events/compaction/mm_compaction_defer_reset/format /sys/kernel/tracing/events/compaction/mm_compaction_finished/format /sys/kernel/tracing/events/compaction/mm_compaction_kcompactd_wake/format /sys/kernel/tracing/events/compaction/mm_compaction_suitable/format /sys/kernel/tracing/events/compaction/mm_compaction_wakeup_kcompactd/format /sys/kernel/tracing/events/error_report/error_report_end/format /sys/kernel/tracing/events/i2c_slave/i2c_slave/format /sys/kernel/tracing/events/migrate/mm_migrate_pages/format /sys/kernel/tracing/events/migrate/mm_migrate_pages_start/format /sys/kernel/tracing/events/pagemap/mm_lru_insertion/format /sys/kernel/tracing/events/power/dev_pm_qos_add_request/format /sys/kernel/tracing/events/power/dev_pm_qos_remove_request/format /sys/kernel/tracing/events/power/dev_pm_qos_update_request/format /sys/kernel/tracing/events/power/pm_qos_update_flags/format /sys/kernel/tracing/events/power/pm_qos_update_target/format /sys/kernel/tracing/events/pwm/pwm_apply/format /sys/kernel/tracing/events/pwm/pwm_get/format /sys/kernel/tracing/events/sched/sched_skip_vma_numa/format /sys/kernel/tracing/events/skb/kfree_skb/format /sys/kernel/tracing/events/thermal/thermal_zone_trip/format /sys/kernel/tracing/events/timer/hrtimer_init/format /sys/kernel/tracing/events/timer/hrtimer_start/format /sys/kernel/tracing/events/xen/xen_mc_batch/format /sys/kernel/tracing/events/xen/xen_mc_extend_args/format /sys/kernel/tracing/events/xen/xen_mc_flush_reason/format /sys/kernel/tracing/events/xen/xen_mc_issue/format Committer testing: root@x1:~# perf trace -e timer:hrtimer_start --max-events=2 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241152380000000, softexpires: 241152380000000, mode: HRTIMER_MODE_ABS) 0.028 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241153654000000, softexpires: 241153654000000, mode: HRTIMER_MODE_ABS_PINNED_HARD) root@x1:~# Suggested-by: -
Howard Chu authored
In this patch, BTF is used to turn enum value to the corresponding name. There is only one system call that uses enum value as its argument, that is `landlock_add_rule()`. The vmlinux btf is loaded lazily, when user decided to trace the `landlock_add_rule` syscall. But if one decide to run `perf trace` without any arguments, the behaviour is to trace `landlock_add_rule`, so vmlinux btf will be loaded by default. The laziest behaviour is to load vmlinux btf when a `landlock_add_rule` syscall hits. But I think you could lose some samples when loading vmlinux btf at run time, for it can delay the handling of other samples. I might need your precious opinions on this... before: ``` perf $ ./perf trace -e landlock_add_rule 0.000 ( 0.008 ms): ldlck-test/438194 landlock_add_rule(rule_type: 2) = -1 EBADFD (File descriptor in bad state) 0.010 ( 0.001 ms): ldlck-test/438194 landlock_add_rule(rule_type: 1) = -1 EBADFD (File descriptor in bad state) ``` after: ``` perf $ ./perf trace -e landlock_add_rule 0.000 ( 0.029 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_NET_PORT) = -1 EBADFD (File descriptor in bad state) 0.036 ( 0.004 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_PATH_BENEATH) = -1 EBADFD (File descriptor in bad state) ``` Committer notes: Made it build with NO_LIBBPF=1, simplified btf_enum_fprintf(), see [1] for the discussion. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix regression in extent map rework when handling insertion of overlapping compressed extent - fix unexpected file length when appending to a file using direct io and buffer not faulted in - in zoned mode, fix accounting of unusable space when flipping read-only block group back to read-write - fix page locking when COWing an inline range, assertion failure found by syzbot - fix calculation of space info in debugging print - tree-checker, add validation of data reference item - fix a few -Wmaybe-uninitialized build warnings * tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry() btrfs: fix corruption after buffer fault in during direct IO append write btrfs: zoned: fix zone_unusable accounting on making block group read-write again btrfs: do not subtract delalloc from avail bytes btrfs: make cow_file_range_inline() honor locked_page on error btrfs: fix corrupt read due to bad offset of a compressed extent map btrfs: tree-checker: validate dref root and objectid
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "Some more build fixes and a random crash fix: - Fix cross-build by setting pkg-config env according to the arch - Fix static build for missing library dependencies - Fix Segfault when callchain has no symbols" * tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf docs: Document cross compilation perf: build: Link lib 'zstd' for static build perf: build: Link lib 'lzma' for static build perf: build: Only link libebl.a for old libdw perf: build: Set Python configuration for cross compilation perf: build: Setup PKG_CONFIG_LIBDIR for cross compilation perf tool: fix dereferencing NULL al->maps
-
- 30 Jul, 2024 4 commits
-
-
Linus Torvalds authored
Merge tag 'chrome-platform-fixes-for-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome-platform fix from Tzung-Bi Shih: "Fix a race condition that sends multiple host commands at a time" * tag 'chrome-platform-fixes-for-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_proto: Lock device when updating MKBP version
-
Linus Torvalds authored
This clarifies the rules for min()/max()/clamp() type checking and makes them a much more efficient macro expansion. In particular, we now look at the type and range of the inputs to see whether they work together, generating a mask of acceptable comparisons, and then just verifying that the inputs have a shared case: - an expression with a signed type can be used for (1) signed comparisons (2) unsigned comparisons if it is statically known to have a non-negative value - an expression with an unsigned type can be used for (3) unsigned comparison (4) signed comparisons if the type is smaller than 'int' and thus the C integer promotion rules will make it signed anyway Here rule (1) and (3) are obvious, and rule (2) is important in order to allow obvious trivial constants to be used together with unsigned values. Rule (4) is not necessarily a good idea, but matches what we used to do, and we have extant cases of this situation in the kernel. Notably with bcachefs having an expression like min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size) where bch2_bucket_sectors_dirty() returns an 's64', and 'ca->mi.bucket_size' is of type 'u16'. Technically that bcachefs comparison is clearly sensible on a C type level, because the 'u16' will go through the normal C integer promotion, and become 'int', and then we're comparing two signed values and everything looks sane. However, it's not entirely clear that a 'min(s64,u16)' operation makes a lot of conceptual sense, and it's possible that we will remove rule (4). After all, the _reason_ we have these complicated type checks is exactly that the C type promotion rules are not very intuitive. But at least for now the rule is in place for backwards compatibility. Also note that rule (2) existed before, but is hugely relaxed by this commit. It used to be true only for the simplest compile-time non-negative integer constants. The new macro model will allow cases where the compiler can trivially see that an expression is non-negative even if it isn't necessarily a constant. For example, the amdgpu driver does min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F)); because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of type 'int' and clearly not a C constant expression, so doing a 'min()' with a 'size_t' is a signedness violation. Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type 'int', but is smart enough to also see that it is clearly non-negative, and thus would allow that case without any complaints. Cc: Arnd Bergmann <arnd@kernel.org> Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
David Sterba authored
Some arch + compiler combinations report a potentially unused variable location in btrfs_lookup_dentry(). This is a false alert as the variable is passed by value and always valid or there's an error. The compilers cannot probably reason about that although btrfs_inode_by_name() is in the same file. > + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9 > + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5 m68k-gcc8/m68k-allmodconfig mips-gcc8/mips-allmodconfig powerpc-gcc5/powerpc-all{mod,yes}config powerpc-gcc5/ppc64_defconfig Initialize it to zero, this should fix the warnings and won't change the behaviour as btrfs_inode_by_name() accepts only a root or inode item types, otherwise returns an error. Reported-by:Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Patryk Duda authored
The cros_ec_get_host_command_version_mask() function requires that the caller must have ec_dev->lock mutex before calling it. This requirement was not met and as a result it was possible that two commands were sent to the device at the same time. The problem was observed while using UART backend which doesn't use any additional locks, unlike SPI backend which locks the controller until response is received. Fixes: f74c7557 ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure") Cc: stable@vger.kernel.org Signed-off-by:
Patryk Duda <patrykd@google.com> Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.comSigned-off-by:
Tzung-Bi Shih <tzungbi@kernel.org>
-
- 29 Jul, 2024 5 commits
-
-
Linus Torvalds authored
For some reason I didn't see this issue on my arm64 or x86-64 builds, but Stephen Rothwell reports that commit 2accfdb7 ("profiling: attempt to remove per-cpu profile flip buffer") left these static variables around, and the powerpc build is unhappy about them: kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable] 52 | static DEFINE_PER_CPU(int, cpu_profile_flip); | ^~~~~~~~~~~~~~~~ .. So remove these stale left-over remnants too. Fixes: 2accfdb7 ("profiling: attempt to remove per-cpu profile flip buffer") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann and Benjamin Tissoires) - some tool type fix for the Wacom driver (Tatsunosuke Tobita) - a reorder of the sensor discovery to ensure the HID AMD SFH is removed when no sensors are available (Basavaraj Natikar) * tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: selftests/hid: add test for attaching multiple time the same struct_ops HID: bpf: prevent the same struct_ops to be attached more than once selftests/hid: disable struct_ops auto-attach selftests/hid: fix bpf_wq new API HID: amd_sfh: Move sensor discovery before HID device initialization hid: bpf: add BPF_JIT dependency HID: wacom: more appropriate tool type categorization HID: wacom: Modify pen IDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "The biggest thing here is the adminq change - but it looks like the only way to avoid headq blocking causing indefinite stalls. This fixes three issues: - Prevent admin commands on one VF blocking another. This prevents a bad VF from blocking a good one, as well as fixing a scalability issue with large # of VFs - Correctly return error on command failure on octeon. We used to treat failed commands as a success. - Fix modpost warning when building virtio_dma_buf. Harmless, but the fix is trivial" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci_modern: remove admin queue serialization lock virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result virtio_pci_modern: pass cmd as an identification token virtio_pci_modern: create admin queue of queried size virtio: create admin queues alongside other virtqueues virtio_pci: pass vq info as an argument to vp_setup_vq() virtio: push out code to vp_avq_index() virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static virtio_pci: introduce vector allocation fallback for slow path virtqueues virtio_pci: pass vector policy enum to vp_find_one_vq_msix() virtio_pci: pass vector policy enum to vp_find_vqs_msix() virtio_pci: simplify vp_request_msix_vectors() call a bit virtio_pci: push out single vq find code to vp_find_one_vq_msix() vdpa/octeon_ep: Fix error code in octep_process_mbox() virtio: add missing MODULE_DESCRIPTION() macro -
Linus Torvalds authored
The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that isn't universally enabled everywhere. Maybe the IRQ_WORK infrastructure should just be unconditional - x86 ends up indirectly enabling it through unconditionally enabling PERF_EVENTS, for example. But it also gets enabled by having SMP support, or even if you just have PRINTK enabled. But in the meantime TWA_NMI_CURRENT causes tons of build failures on various odd minimal configs. Which did show up in linux-next, but despite that nobody bothered to fix it or even inform me until -rc1 was out. Fixes: 466e4d80 ("task_work: Add TWA_NMI_CURRENT as an additional notify mode") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
kernelci.org bot <bot@kernelci.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Linus Torvalds authored
This is the really old legacy kernel profiling code, which has long since been obviated by "real profiling" (ie 'prof' and company), and mainly remains as a source of syzbot reports. There are anecdotal reports that people still use it for boot-time profiling, but it's unlikely that such use would care about the old NUMA optimizations in this code from 2004 (commit ad02973d: "profile: 512x Altix timer interrupt livelock fix" in the BK import archive at [1]) So in order to head off future syzbot reports, let's try to simplify this code and get rid of the per-cpu profile buffers that are quite a large portion of the complexity footprint of this thing (including CPU hotplug callbacks etc). It's unlikely anybody will actually notice, or possibly, as Thomas put it: "Only people who indulge in nostalgia will notice :)". That said, if it turns out that this code is actually actively used by somebody, we can always revert this removal. Thus the "attempt" in the summary line. [ Note: in a small nod to "the profiling code can cause NUMA problems", this also removes the "increment the last entry in the profiling array on any unknown hits" logic. That would account any program counter in a module to that single counter location, and might exacerbate any NUMA cacheline bouncing issues ] Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/ Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
