- 19 Sep, 2022 14 commits
-
-
Richard Fitzgerald authored
Split the I2C bus driver definition and probe()/remove() into a separate module so that a SoundWire build of CS42L42 support does not have a spurious dependency on I2C. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by:
Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220915094444.11434-8-povik+lin@cutebit.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Richard Fitzgerald authored
Pass pointers to snd_soc_component_driver and snd_soc_dai_driver objects into cs42l42_common_probe(). This is in preparation for adding SoundWire support. Signed-off-by:
-
Richard Fitzgerald authored
On SoundWire the system resume cannot restore registers until the host controller has re-enumerated the peripheral. This patch splits cs42l42_resume() into two functions, one to power up and the other to restore registers, ready for adding SoundWire support. Signed-off-by:
-
Richard Fitzgerald authored
To prepare for adding SoundWire the probe must be split into three parts: 1) The bus-specific probe 2) Common bus-agnostic probe steps 3) Initialization of the peripheral registers Step (3) must be separate because on SoundWire devices the probe must enable power supplies and release reset so that the peripheral can be enumerated by the bus, but it isn't possible to access registers until enumeration has completed. The call to devm_snd_soc_register_component() must be done at stage (2) so that it can EPROBE_DEFER if necessary. In SoundWire systems stage (3) is not a probe event so a deferral at this stage would not result in re-probing dependencies. A new init_done flag indicates that the chip has been identified and initialized. This is used to prevent cs42l42_remove(), cs42l42_suspend(), cs42l42_restore() and cs42l42_irq_thread() from attempting register accesses if the chip was not successfully initialized. Although this cannot happen on I2C, because the entire probe would fail, it is possible on SoundWire if probe succeeds but the cs42l42 is never enumerated. Signed-off-by:
-
Richard Fitzgerald authored
In preparation for splitting cs42l42_i2c_probe() into multiple functions replace use of &i2c_client->dev with cs42l42->dev. This reduces diff clutter in the patch that splits the function. Signed-off-by:
-
Richard Fitzgerald authored
Clean up the handling of bitclock frequency by keeping all the logic in cs42l42_pcm_hw_params(), which then simply passes the frequency as an argument to cs42l42_pll_config(). The previous code had become clunky as a legacy of earlier versions of the clock handling. The logic was split across cs42l42_pcm_hw_params() and cs42l42_pll_config(), with the params-derived bclk stashed in struct cs42l42_private only to pass it to cs42l42_pll_config(). Signed-off-by:
-
Martin Povišer authored
CS42L83 is a publicly undocumented part found in Apple machines, similar (almost identical) to CS42L42. Share the binding schema of CS42L42 for it. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Mark Brown authored
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support for SC8280XP SoC machine driver. First patch moves some of the commonly used code to common from sm8250 machine driver and the follow on code adds minimal support for sc8280xp. Currently this driver is only tested with SmartSpeakers and Headset on Lenovo Thinkpad X13s. Support for sm8450 is tested and I will post the patches soon.
-
Srinivas Kandagatla authored
Add machine driver for sc8280xp SoC. This intial supports only includes WSA883x Speakers and WCD938x based headset. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916132427.1845-6-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
SM8450 machine driver code can be reused across multiple Qualcomm SoCs, At least another 2 of them for now (SM8450 and SC8250XP). Move some of the common SoundWire stream specific code to common file so that other drivers can use it instead of duplication. This patch is to prepare the common driver to be able to add new SoCs support with less dupication. Signed-off-by:
-
Srinivas Kandagatla authored
Add compatibles for sm8450 and sm8250xp based soundcards. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Srinivas Kandagatla authored
Sort compatible strings for consistency reasons. Signed-off-by:
-
Srinivas Kandagatla authored
qcom_snd_parse_of depends on ASoC EXPORT_SYMBOL_GPL functions, so make qcom_snd_parse_of and EXPORT_SYMBOL_GPL. Signed-off-by:
-
Peter Ujfalusi authored
With the change introduced by 6ac24610, the calibration can only be done after the codec probe (but questionable if it is working since 203A_AMP_EN is 0) or when the codec is powered up for audio use, in other cases "AMP is not ready to run calibration" is printed. This changes how this worked before the patch: the codec was force powered on for the duration of the calibration readout, then shut down. So, if a calibration was asked when the codec was active, it would have powered it down? To correct the calibration logic: check if the codec is powered on and if it is not then enable it, do the readout and put it back to disabled. Do this while keeping the dapm locked to avoid interfering with normal operation via DAPM. Fixes: 6ac24610 ("ASoC: max98390: Remove unnecessary amp on/off conrtol") Reported-by:
Fred Oh <fred.oh@linux.intel.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220916111349.4433-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
- 15 Sep, 2022 1 commit
-
-
Mark Brown authored
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Hi, Dependencies/merging ==================== 1. The DTS patches are independent. 2. The binding patches should come together, because of context changes. Could be one of: Qualcomm SoC, ASoC or DT tree. Changes since v3 ================ 1. Patch 9-10: re-order, so first apr.yaml is corrected and then we convert to DT schema. This makes patchset fully bisectable in expense of changing the same lines twice. 2. Patch 11: New patch. Changes since v2 ================ 1. Patch 9: rename and extend commit msg. 2. Add Rb tags. Changes since v1 ================ 1. Patch 9: New patch. 2. Patch 10: Correct also sound/qcom,q6apm-dai.yaml (Rob). 2. Patch 13: New patch. 3. Add Rb/Tb tags. Best regards, Krzysztof Krzysztof Kozlowski (15): arm64: dts: qcom: sdm630: align APR services node names with dtschema arm64: dts: qcom: sdm845: align APR services node names with dtschema arm64: dts: qcom: sm8250: align APR services node names with dtschema arm64: dts: qcom: msm8996: fix APR services nodes arm64: dts: qcom: sdm845: align dai node names with dtschema arm64: dts: qcom: msm8996: align dai node names with dtschema arm64: dts: qcom: qrb5165-rb5: align dai node names with dtschema arm64: dts: qcom: sm8250: use generic name for LPASS clock controller dt-bindings: soc: qcom: apr: correct service children ASoC: dt-bindings: qcom,q6asm: convert to dtschema ASoC: dt-bindings: qcom,q6adm: convert to dtschema ASoC: dt-bindings: qcom,q6dsp-lpass-ports: cleanup example ASoC: dt-bindings: qcom,q6dsp-lpass-clocks: cleanup example ASoC: dt-bindings: qcom,q6apm-dai: adjust indentation in example dt-bindings: soc: qcom: apr: add missing properties .../bindings/soc/qcom/qcom,apr.yaml | 112 ++++++++++++++++-- .../bindings/sound/qcom,q6adm-routing.yaml | 52 ++++++++ .../devicetree/bindings/sound/qcom,q6adm.txt | 39 ------ .../bindings/sound/qcom,q6apm-dai.yaml | 21 ++-- .../bindings/sound/qcom,q6asm-dais.yaml | 112 ++++++++++++++++++ .../devicetree/bindings/sound/qcom,q6asm.txt | 70 ----------- .../sound/qcom,q6dsp-lpass-clocks.yaml | 36 +++--- .../sound/qcom,q6dsp-lpass-ports.yaml | 64 +++++----- arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 8 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +- .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +- .../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 +- 16 files changed, 346 insertions(+), 208 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml delete mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml delete mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.txt -- 2.34.1
-
- 14 Sep, 2022 13 commits
-
-
Krzysztof Kozlowski authored
The APR bindings were not describing all properties already used in DTS: 1. Add qcom,glink-channels, qcom,smd-channels and qcom,intents (widely used). 2. Add power-domains for MSM8996. Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup the example DTS by fixing indentation to 4-spaces and adding blank lines for readability. Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup the example DTS by adding APR and service compatibles, adding typical properties, using proper device node names for services and fixing indentation to 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup the example DTS by adding APR and service compatibles, adding typical properties, using proper device node names for services and fixing indentation to 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert Qualcomm Audio Device Manager (Q6ADM) bindings to DT schema. The original bindings documented: 1. APR service node with compatibles: "qcom,q6adm" and "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>", 2. Routing child node with compatible "qcom,q6adm-routing". The conversion entirely drops (1) because the compatible is already documented in bindings/soc/qcom/qcom,apr.yaml. The "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not used at all - neither in existing DTS, nor in downstream sources - so versions seems to be fully auto-detectable. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema. The original bindings documented: 1. APR service node with compatibles: "qcom,q6asm" and "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>", 2. actual DAIs child node with compatible "qcom,q6asm-dais". The conversion entirely drops (1) because the compatible is already documented in bindings/soc/qcom/qcom,apr.yaml. The "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not used at all - neither in existing DTS, nor in downstream sources - so versions seems to be fully auto-detectable. Another change done in conversion is adding "iommus" property, which is already used in DTS and Linux driver. Signed-off-by:
-
Krzysztof Kozlowski authored
The APR bindings were not describing properly children nodes for DAIs. None of the DTSes use unit addresses for the children, so correct the nodes and reference their schema: clock-controller, dais and routing. Signed-off-by:
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220914133355.3779364-3-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
-
Yang Yingliang authored
dev_err/dev_dbg() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
-
Liang He authored
In eukrea_tlv320_probe(), we need to hold the reference returned from of_find_compatible_node() which has increased the refcount and then call of_node_put() with it when done. Fixes: 66f23290 ("ASoC: eukrea-tlv320: Add DT support.") Co-authored-by:
Kelin Wang <wangkelin2023@163.com> Signed-off-by:
Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.comSigned-off-by:
-
Judy Hsiao authored
Use regmap_read_poll_timeout to poll I2S_CLR. It also fixes the 'rockchip-i2s ff070000.i2s; fail to clear' when the read of I2S_CLR exceeds the retry limit. Fixes: 0ff9f8b9 ("ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR") Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220914031234.2250298-1-judyhsiao@chromium.orgSigned-off-by:
-
Fabio Estevam authored
Since commit 2848d34c ("ASoC: tas2562: Fix mute/unmute") the following build warning is seen: sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Fix the warning by returning the 'ret' variable. Fixes: 2848d34c ("ASoC: tas2562: Fix mute/unmute") Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
-
- 13 Sep, 2022 8 commits
-
-
David Lin authored
Add a property to control the driving of ADCOUT. Signed-off-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20220913120641.792502-2-CTLIN0@nuvoton.comSigned-off-by:
-
David Lin authored
Add a property to control the driving of ADCOUT. Signed-off-by:
-
Gaosheng Cui authored
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n, gcc warns about an unused variable: sound/soc/intel/skylake/skl.c: In function ‘probe_codec’: sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable] struct skl_dev *skl = bus_to_skl(bus); ^~~ cc1: all warnings being treated as errors Fixes: 3fd63658 ("ASoC: Intel: Drop hdac_ext usage for codec device creation") Signed-off-by:Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.comSigned-off-by:
-
Mikhail Rudenko authored
In the case when a codec device is probed before codec analog controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in a misleading error message sun4i-codec 1c22c00.codec: Failed to register our card even if the device is probed successfully later. Use dev_err_probe() to demote the above error to a debug message. Signed-off-by:Mikhail Rudenko <mike.rudenko@gmail.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
qcom,q6afe is already documented in soc/qcom/qcom,apr.yaml. The version-based compatibles ("qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>") are not used (neither in upstream nor in downstream DTS). Signed-off-by: -
Mark Brown authored
This reverts commit b3821f78 ("arm64: dts: mediatek: kukui: Remove i2s-share properties") which was mistakenly applied to the ASoC tree. Signed-off-by:
-
Shengjiu Wang authored
This patch fixup this warning when CONFIG_PM not defined linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\ not used [-Werror=unused-function] 631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active) | ^~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: e9e7df88 ("ASoC: ak4458: Remove component probe() and remove()") Reported-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Mark Brown authored
Linux 6.0-rc4 so we can test on BeagleBone again.
-
- 11 Sep, 2022 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Remove unused scripts/gcc-ld script - Add zstd support to scripts/extract-ikconfig - Check 'make headers' for UML - Fix scripts/mksysmap to ignore local symbols * tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: mksysmap: Fix the mismatch of 'L0' symbols in System.map kbuild: disable header exports for UML in a straightforward way scripts/extract-ikconfig: add zstd compression support scripts: remove obsolete gcc-ld script
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Three small arm64 fixes, all related to optional architecture extensions: BTI, SME and 52-bit virtual addressing: - Disable in-kernel BTI when compiling with GCC, as it makes invalid assumptions about the distance between functions which has led to crashes when calling modules on a CPU with BTI support - Remove bogus TIF_SME flag management if memory allocation fails in the ptrace code - Fix the resume path when configured for 52-bit virtual addressing" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: fix resume for 52-bit enabled builds arm64/ptrace: Don't clear calling process' TIF_SME on OOM arm64/bti: Disable in kernel BTI when cross section thunks are broken -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Only documentation and DT binding fixes and improvements" * tag 'i2c-for-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: renesas,riic: Fix 'unevaluatedProperties' warnings docs: i2c: piix4: Fix typos, add markup, drop link docs: i2c: i2c-topology: reorder sections more logically docs: i2c: i2c-topology: fix incorrect heading docs: i2c: i2c-topology: fix typo
-
