The zero padding that is added to NTB's does
not zero the memory correctly.
This is because the skb_put modifies the value
of skb_out->len which results in the memset
command not setting any memory to zero as
(ctx->tx_max - skb_out->len) == 0.

I have resolved this by storing the size of
the memory to be zeroed before the skb_put
and using this in the memset call.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andy Shevchenko says:

====================
stmmac: pci: Fix crash on Intel Galileo Gen2

Due to misconfiguration of PCI driver for Intel Quark the user will get
a kernel crash:

udhcpc: started, v1.26.2
stmmaceth 0000:00:14.6 eth0: device MAC address 98:4f:ee:05:ac:47
Generic PHY stmmac-a6:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-a6:01, irq=-1)
stmmaceth 0000:00:14.6 eth0: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 0000:00:14.6 eth0: registered PTP clock
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: sending discover

stmmaceth 0000:00:14.6 eth0: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: stmmac_xmit+0xf1/0x1080

Fix this by adding necessary settings.

P.S. I split fix to three patches according to what each of them adds.
====================
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New helper is added in order to prevent misconfiguration happened
for one of the platforms when configuration data is expanded.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit abe80fdc

    ("net: stmmac: RX queue routing configuration")

missed Intel Quark configuration. Append it here.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit a8f5102a

	("net: stmmac: TX and RX queue priority configuration")

missed Intel Quark configuration. Append it here.

Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 26d6851f

	("net: stmmac: set default number of rx and tx queues in stmmac_pci")

missed Intel Quark configuration. Append it here.

Fixes: 26d6851f ("net: stmmac: set default number of rx and tx queues in stmmac_pci")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch fixes two things at once:

1) It checks the env->allow_ptr_leaks and only prints the map address to
   the log if we have the privileges to do so, otherwise it just dumps 0
   as we would when kptr_restrict is enabled on %pK. Given the latter is
   off by default and not every distro sets it, I don't want to rely on
   this, hence the 0 by default for unprivileged.

2) Printing of ldimm64 in the verifier log is currently broken in that
   we don't print the full immediate, but only the 32 bit part of the
   first insn part for ldimm64. Thus, fix this up as well; it's okay to
   access, since we verified all ldimm64 earlier already (including just
   constants) through replace_map_fd_with_map_ptr().

Fixes: 1be7f75d ("bpf: enable non-root eBPF programs")
Fixes: cbd35700 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent Chelsio firmware started using few port capablity bits to
manage FEC and as driver was not aware of FEC changes those bits
were zeroed, consequently disabling FEC.

Avoid zeroing those bits and default to whatever the firmware
tells us the Link is currently advertising.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If 'devm_kzalloc' fails, a NULL pointer will be dereferenced.
Return -ENOMEM instead, as done for some other memory allocation just a
few lines above.

Fixes: 98cd1552 ("net: dsa: Mock-up driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have the number of longs, but we need to calculate the number of
bytes required.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlan devices, like all other software devices, enable
NETIF_F_HW_CSUM feature.  However, unlike all the othe other
software devices, vlans will switch to using IP|IPV6_CSUM
features, if the underlying devices uses them.  In these situations,
checksum offload features on the vlan device can't be controlled
via ethtool.

This patch makes vlans keep HW_CSUM feature if the underlying
device supports checksum offloading.  This makes vlan devices
behave like other software devices, and restores control to the
user.

A side-effect is that some offload settings (typically UFO)
may be enabled on the vlan device while being disabled on the HW.
However, the GSO code will correctly process the packets. This
actually results in slightly better raw throughput.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Congestion control modules that want full control over congestion
control behavior do not want the cwnd modifications controlled by
the sysctl_tcp_slow_start_after_idle code path.
So skip those code paths for CC modules that use the cong_control()
API.
As an example, those cwnd effects are not desired for the BBR congestion
control algorithm.

Fixes: c0402760 ("tcp: new CC hook to set sending rate with rate_sample in any CA state")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4 dst could use fi->fib_metrics to store metrics but fib_info
itself is refcnt'ed, so without taking a refcnt fi and
fi->fib_metrics could be freed while dst metrics still points to
it. This triggers use-after-free as reported by Andrey twice.

This patch reverts commit 2860583f ("ipv4: Kill rt->fi") to
restore this reference counting. It is a quick fix for -net and
-stable, for -net-next, as Eric suggested, we can consider doing
reference counting for metrics itself instead of relying on fib_info.

IPv6 is very different, it copies or steals the metrics from mx6_config
in fib6_commit_metrics() so probably doesn't need a refcnt.

Decnet has already done the refcnt'ing, see dn_fib_semantic_match().

Fixes: 2860583f ("ipv4: Kill rt->fi")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the crash that happens when driver tries to collect statistics
from already released "aq_vec" object.
If adapter is in "down" state we still allow user to see statistics from HW.

V2: fixed braces around "aq_vec_free".

Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Tested-by: David Arcari <darcari@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was introduced while switching to pci_alloc_irq_vectors recently
and fixes:

[   60.527052] alx 0000:03:00.0 enp3s0: Enabling MSI-X interrupts failed!
[   60.529323] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
[   60.531589] IP: alx_alloc_napis+0xe6/0x1e0 [alx]
[   60.533831] PGD 0
[   60.533833] P4D 0

[   60.540559] Oops: 0002 [#1] SMP
[   60.542759] Modules linked in: ebtables ip6table_filter ip6_tables.....
[   60.549990]  drm_kms_helper drm crc32c_intel alx serio_raw mdio wmi video i2c_hid uas usb_storage
[   60.551404] CPU: 0 PID: 999 Comm: NetworkManager Not tainted 4.11.0+ #1
[   60.552813] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[   60.554219] task: ffff8804ae833c00 task.stack: ffffc90003eec000
[   60.555383] RIP: 0010:alx_alloc_napis+0xe6/0x1e0 [alx]
[   60.556615] RSP: 0018:ffffc90003eef660 EFLAGS: 00010286
[   60.557787] RAX: ffff8804962835a0 RBX: ffff8804aee8a8c0 RCX: 0000000000000000
[   60.558987] RDX: 0000000000000060 RSI: 0000000000000000 RDI: ffff880496283600
[   60.559979] RBP: ffffc90003eef688 R08: ffff8804c1c1e7e0 R09: ffff8804962835a0
[   60.560978] R10: ffff8804962835a0 R11: 0000000000000102 R12: 0000000000000000
[   60.561974] R13: 0000000000000000 R14: ffff8804aee8aaf0 R15: ffffffffa0052ea0
[   60.562974] FS:  00007f1cecbc9940(0000) GS:ffff8804c1c00000(0000) knlGS:0000000000000000
[   60.564003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   60.564884] CR2: 00000000000000b8 CR3: 0000000496025000 CR4: 00000000003406f0
[   60.565782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   60.566676] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   60.567560] Call Trace:
[   60.568500]  __alx_open+0xa2/0x570 [alx]
[   60.569355]  ? notifier_call_chain+0x4a/0x70
[   60.570144]  alx_open+0x17/0x20 [alx]
[   60.570909]  __dev_open+0xc6/0x140
[   60.571682]  ? _raw_spin_unlock_bh+0x1a/0x20
[   60.572469]  __dev_change_flags+0x9d/0x160
[   60.573252]  dev_change_flags+0x29/0x60
[   60.574070]  do_setlink+0x32e/0xc90
[   60.574815]  ? ttwu_do_activate+0x77/0x80
[   60.575544]  ? drm_fb_helper_dirty.isra.17+0xc7/0xe0 [drm_kms_helper]
[   60.576273]  ? drm_fb_helper_cfb_imageblit+0x30/0x40 [drm_kms_helper]
[   60.577004]  ? bit_putcs+0x2f7/0x560
[   60.577729]  ? nla_parse+0x35/0x140
[   60.578518]  rtnl_newlink+0x7d3/0x900
[   60.579280]  ? security_capset+0x30/0x80
[   60.580029]  ? ns_capable_common+0x68/0x80
[   60.580747]  ? ns_capable+0x13/0x20
[   60.581453]  rtnetlink_rcv_msg+0xee/0x220
[   60.582198]  ? rtnl_newlink+0x900/0x900
[   60.582909]  netlink_rcv_skb+0xe7/0x120
[   60.583601]  rtnetlink_rcv+0x28/0x30
[   60.584303]  netlink_unicast+0x18c/0x220
[   60.585002]  netlink_sendmsg+0x2ba/0x3b0
[   60.585703]  sock_sendmsg+0x38/0x50
[   60.586436]  ___sys_sendmsg+0x2b6/0x2d0
[   60.587123]  ? lockref_put_or_lock+0x5e/0x80
[   60.587822]  ? dput+0x155/0x1d0
[   60.588518]  ? mntput+0x24/0x40
[   60.589215]  __sys_sendmsg+0x54/0x90
[   60.589907]  ? __sys_sendmsg+0x54/0x90
[   60.590627]  SyS_sendmsg+0x12/0x20
[   60.591333]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[   60.592021] RIP: 0033:0x7f1ceb44e3b0
[   60.592697] RSP: 002b:00007fffd7f0a2d0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[   60.593385] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ceb44e3b0
[   60.594107] RDX: 0000000000000000 RSI: 00007fffd7f0a380 RDI: 000000000000000c
[   60.594798] RBP: 00007fffd7f0a800 R08: 0000000000000000 R09: 0000000000000000
[   60.595502] R10: 0000564ffbae6e20 R11: 0000000000000293 R12: 0000000000000001
[   60.596200] R13: 0000000000000002 R14: 0000000000000010 R15: 00007fffd7f0a4d0
[   60.596899] Code: ed 85 c9 0f 8f ec 00 00 00 48 8b 3d 9d 97 1a e2 ba 50 00 00 00 be c0 80 40 01 4c 8b a3 30 02 00 00 e8 ff e5 1d e1 48 85 c0 74 a3 <49> 89 84 24 b8 00 00 00 48 8b 93 30 02 00 00 48 8b 4b 08 48 89
[   60.597642] RIP: alx_alloc_napis+0xe6/0x1e0 [alx] RSP: ffffc90003eef660
[   60.598427] CR2: 00000000000000b8

Fixes: f3297f68 ("net: alx: switch to pci_alloc_irq_vectors")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whole point of randomization was to hide server uptime, but an attacker
can simply start a syn flood and TCP generates 'old style' timestamps,
directly revealing server jiffies value.

Also, TSval sent by the server to a particular remote address vary
depending on syncookies being sent or not, potentially triggering PAWS
drops for innocent clients.

Lets implement proper randomization, including for SYNcookies.

Also we do not need to export sysctl_tcp_timestamps, since it is not
used from a module.

In v2, I added Florian feedback and contribution, adding tsoff to
tcp_get_cookie_sock().

v3 removed one unused variable in tcp_v4_connect() as Florian spotted.

Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and
IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size()
when they were added. Do so now and also add the corresponding policy
entries:

Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Mike Manning <mmanning@brocade.com>
Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag")
Fixes: 99f906e9 ("bridge: add per-port broadcast flood flag")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull char/misc driver updates from Greg KH:
 "Here is the big set of new char/misc driver drivers and features for
  4.12-rc1.

  There's lots of new drivers added this time around, new firmware
  drivers from Google, more auxdisplay drivers, extcon drivers, fpga
  drivers, and a bunch of other driver updates. Nothing major, except if
  you happen to have the hardware for these drivers, and then you will
  be happy :)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  firmware: google memconsole: Fix return value check in platform_memconsole_init()
  firmware: Google VPD: Fix return value check in vpd_platform_init()
  goldfish_pipe: fix build warning about using too much stack.
  goldfish_pipe: An implementation of more parallel pipe
  fpga fr br: update supported version numbers
  fpga: region: release FPGA region reference in error path
  fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
  mei: drop the TODO from samples
  firmware: Google VPD sysfs driver
  firmware: Google VPD: import lib_vpd source files
  misc: lkdtm: Add volatile to intentional NULL pointer reference
  eeprom: idt_89hpesx: Add OF device ID table
  misc: ds1682: Add OF device ID table
  misc: tsl2550: Add OF device ID table
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Use kernel common min() implementation
  uio_mf624: Align memory regions to page size and set correct offsets
  uio_mf624: Refactor memory info initialization
  uio: Allow handling of non page-aligned memory regions
  hangcheck-timer: Fix typo in comment
  ...

Merge tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Very tiny pull request for 4.12-rc1 for the driver core this time
  around.

  There are some documentation fixes, an eventpoll.h fixup to make it
  easier for the libc developers to take our header files directly, and
  some very minor driver core fixes and changes.

  All have been in linux-next for a very long time with no reported
  issues"

* tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "kref: double kref_put() in my_data_handler()"
  driver core: don't initialize 'parent' in device_add()
  drivers: base: dma-mapping: use nth_page helper
  Documentation/ABI: add information about cpu_capacity
  debugfs: set no_llseek in DEFINE_DEBUGFS_ATTRIBUTE
  eventpoll.h: add missing epoll event masks
  eventpoll.h: fix epoll event masks

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

Pull networking fixes from David Miller:

 1) The wireless rate info fix from Johannes Berg.

 2) When a RAW socket is in hdrincl mode, we need to make sure that the
    user provided at least a minimally sized ipv4/ipv6 header. Fix from
    Alexander Potapenko.

 3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using
    nla_put_string() so that it is NULL terminated.

 4) Fix a bug in TCP fastopen handling, wherein child sockets
    erroneously inherit the fastopen_req from the parent, and later can
    end up derefencing freed memory or doing a double free. From Eric
    Dumazet.

 5) Don't clear out netdev stats at close time in tg3 driver, from
    YueHaibing.

 6) Fix refcount leak in xt_CT, from Gao Feng.

 7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang.

 8) Fix deadlock due to taking the expectation lock twice, also from
    Liping Zhang.

 9) Make xt_socket work again with ipv6, from Peter Tirsek.

10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo
    Abeni.

11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry
    layout. From Jesper Dangaard Brouer.

12) Fix ethtool reported device name in aquantia driver, from Pavel
    Belous.

13) Fix build failures due to the compile time size test not working in
    netfilter conntrack. From Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  cfg80211: make RATE_INFO_BW_20 the default
  ipv6: initialize route null entry in addrconf_init()
  qede: Fix possible misconfiguration of advertised autoneg value.
  qed: Fix overriding of supported autoneg value.
  qed*: Fix possible overflow for status block id field.
  rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string
  netvsc: make sure napi enabled before vmbus_open
  aquantia: Fix driver name reported by ethtool
  ipv4, ipv6: ensure raw socket message is big enough to hold an IP header
  net/sched: remove redundant null check on head
  tcp: do not inherit fastopen_req from parent
  forcedeth: remove unnecessary carrier status check
  ibmvnic: Move queue restarting in ibmvnic_tx_complete
  ibmvnic: Record SKB RX queue during poll
  ibmvnic: Continue skb processing after skb completion error
  ibmvnic: Check for driver reset first in ibmvnic_xmit
  ibmvnic: Wait for any pending scrqs entries at driver close
  ibmvnic: Clean up tx pools when closing
  ibmvnic: Whitespace correction in release_rx_pools
  ibmvnic: Delete napi's when releasing driver resources
  ...

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...

Pull x86 platform-drivers update from Darren Hart:
 "This represents a significantly larger and more complex set of changes
  than those of prior merge windows.

  In particular, we had several changes with dependencies on other
  subsystems which we felt were best managed through merges of immutable
  branches, including one each from input, i2c, and leds. Two patches
  for the watchdog subsystem are included after discussion with Wim and
  Guenter following a collision in linux-next (this should be resolved
  and you should only see these two appear in this pull request). These
  are called out in the "External" section below.

  Summary of changes:
   - significant further cleanup of fujitsu-laptop and hp-wmi
   - new model support for ideapad, asus, silead, and xiaomi
   - new hotkeys for thinkpad and models using intel-vbtn
   - dell keyboard backlight improvements
   - build and dependency improvements
   - intel * ipc fixes, cleanups, and api updates
   - single isolated fixes noted below

  External:
   - watchdog: iTCO_wdt: Add PMC specific noreboot update api
   - watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
   - Merge branch 'ib/4.10-sparse-keymap-managed'
   - Merge branch 'i2c/for-INT33FE'
   - Merge branch 'linux-leds/dell-laptop-changes-for-4.12'

  platform/x86:
   - Add Intel Cherry Trail ACPI INT33FE device driver
   - remove sparse_keymap_free() calls
   - Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD

  asus-wmi:
   - try to set als by default
   - fix cpufv sysfs file permission

  acer-wmi:
   - setup accelerometer when ACPI device was found

  ideapad-laptop:
   - Add IdeaPad V310-15ISK to no_hw_rfkill
   - Add IdeaPad 310-15IKB to no_hw_rfkill

  intel_pmc_ipc:
   - use gcr mem base for S0ix counter read
   - Fix iTCO_wdt GCS memory mapping failure
   - Add pmc gcr read/write/update api's
   - fix gcr offset

  dell-laptop:
   - Add keyboard backlight timeout AC settings
   - Handle return error form dell_get_intensity.
   - Protect kbd_state against races
   - Refactor kbd_led_triggers_store()

  hp-wireless:
   - reuse module_acpi_driver
   - add Xiaomi's hardware id to the supported list

  intel-vbtn:
   - add volume up and down

  INT33FE:
   - add i2c dependency

  hp-wmi:
   - Cleanup exit paths
   - Do not shadow errors in sysfs show functions
   - Use DEVICE_ATTR_(RO|RW) helper macros
   - Refactor dock and tablet state fetchers
   - Cleanup wireless get_(hw|sw)state functions
   - Refactor redundant HPWMI_READ functions
   - Standardize enum usage for constants
   - Cleanup local variable declarations
   - Do not shadow error values
   - Fix detection for dock and tablet mode
   - Fix error value for hp_wmi_tablet_state

  fujitsu-laptop:
   - simplify error handling in acpi_fujitsu_laptop_add()
   - do not log LED registration failures
   - switch to managed LED class devices
   - reorganize LED-related code
   - refactor LED registration
   - select LEDS_CLASS
   - remove redundant fields from struct fujitsu_bl
   - account for backlight power when determining brightness
   - do not log set_lcd_level() failures in bl_update_status()
   - ignore errors when setting backlight power
   - make disable_brightness_adjust a boolean
   - clean up use_alt_lcd_levels handling
   - sync brightness in set_lcd_level()
   - simplify set_lcd_level()
   - merge set_lcd_level_alt() into set_lcd_level()
   - switch to a managed backlight device
   - only handle backlight when appropriate
   - update debug message logged by call_fext_func()
   - rename call_fext_func() arguments
   - simplify call_fext_func()
   - clean up local variables in call_fext_func()
   - remove keycode fields from struct fujitsu_bl
   - model-dependent sparse keymap overrides
   - use a sparse keymap for hotkey event generation
   - switch to a managed hotkey input device
   - refactor hotkey input device setup
   - use a sparse keymap for brightness key events
   - switch to a managed backlight input device
   - refactor backlight input device setup
   - remove pf_device field from struct fujitsu_bl
   - only register platform device if FUJ02E3 is present
   - add and remove platform device in separate functions
   - simplify platform device attribute definitions
   - remove backlight-related attributes from the platform device
   - cleanup error labels in fujitsu_init()
   - only register backlight device if FUJ02B1 is present
   - sync backlight power status in acpi_fujitsu_laptop_add()
   - register backlight device in a separate function
   - simplify brightness key event generation logic
   - decrease indentation in acpi_fujitsu_bl_notify()

  intel-hid:
   - Add missing ->thaw callback
   - do not set parents of input devices explicitly
   - remove redundant set_bit() call
   - use devm_input_allocate_device() for HID events input device
   - make intel_hid_set_enable() take a boolean argument
   - simplify enabling/disabling HID events

  silead_dmi:
   - Add touchscreen info for Surftab Wintron 7.0
   - Abort early if DMI does not match
   - Do not treat all devices as i2c_clients
   - Add entry for Insyde 7W tablets
   - Constify properties arrays

  intel_scu_ipc:
   - Introduce intel_scu_ipc_raw_command()
   - Introduce SCU_DEVICE() macro
   - Remove redundant subarch check
   - Rearrange init sequence
   - Platform data is mandatory

  asus-nb-wmi:
   - Add wapf4 quirk for the X302UA

  dell-*:
   - Call new led hw_changed API on kbd brightness change
   - Add a generic dell-laptop notifier chain

  eeepc-laptop:
   - Skip unknown key messages 0x50 0x51

  thinkpad_acpi:
   - add mapping for new hotkeys
   - guard generic hotkey case"

* tag 'platform-drivers-x86-v4.12-1' of git://git.infradead.org/linux-platform-drivers-x86: (108 commits)
  platform/x86: Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
  platform/x86: asus-wmi: try to set als by default
  platform/x86: asus-wmi: fix cpufv sysfs file permission
  platform/x86: acer-wmi: setup accelerometer when ACPI device was found
  platform/x86: ideapad-laptop: Add IdeaPad V310-15ISK to no_hw_rfkill
  platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read
  platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure
  watchdog: iTCO_wdt: Add PMC specific noreboot update api
  watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
  platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's
  platform/x86: intel_pmc_ipc: fix gcr offset
  platform/x86: dell-laptop: Add keyboard backlight timeout AC settings
  platform/x86: dell-laptop: Handle return error form dell_get_intensity.
  platform/x86: hp-wireless: reuse module_acpi_driver
  platform/x86: intel-vbtn: add volume up and down
  platform/x86: INT33FE: add i2c dependency
  platform/x86: hp-wmi: Cleanup exit paths
  platform/x86: hp-wmi: Do not shadow errors in sysfs show functions
  platform/x86: hp-wmi: Use DEVICE_ATTR_(RO|RW) helper macros
  platform/x86: hp-wmi: Refactor dock and tablet state fetchers
  ...

Pull VFIO updates from Alex Williamson:

 - Updates for SPAPR IOMMU backend including compatibility test and
   memory allocation check (Alexey Kardashevskiy)

 - Updates for type1 IOMMU backend to remove asynchronous locked page
   accounting and remove redundancy (Alex Williamson)

* tag 'vfio-v4.12-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Reduce repetitive calls in vfio_pin_pages_remote()
  vfio/type1: Prune vfio_pin_page_external()
  vfio/type1: Remove locked page accounting workqueue
  vfio/spapr_tce: Check kzalloc() return when preregistering memory
  vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check

Pull xen updates from Juergen Gross:
 "Xen fixes and featrues for 4.12. The main changes are:

   - enable building the kernel with Xen support but without enabling
     paravirtualized mode (Vitaly Kuznetsov)

   - add a new 9pfs xen frontend driver (Stefano Stabellini)

   - simplify Xen's cpuid handling by making use of cpu capabilities
     (Juergen Gross)

   - add/modify some headers for new Xen paravirtualized devices
     (Oleksandr Andrushchenko)

   - EFI reset_system support under Xen (Julien Grall)

   - and the usual cleanups and corrections"

* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
  xen: Move xen_have_vector_callback definition to enlighten.c
  xen: Implement EFI reset_system callback
  arm/xen: Consolidate calls to shutdown hypercall in a single helper
  xen: Export xen_reboot
  xen/x86: Call xen_smp_intr_init_pv() on BSP
  xen: Revert commits da72ff5b and 72a9b186
  xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
  xen/scsifront: use offset_in_page() macro
  xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
  xen/arm,arm64: fix xen_dma_ops after 815dd187 "Consolidate get_dma_ops..."
  xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
  x86/cpu: remove hypervisor specific set_cpu_features
  vmware: set cpu capabilities during platform initialization
  x86/xen: use capabilities instead of fake cpuid values for xsave
  x86/xen: use capabilities instead of fake cpuid values for x2apic
  x86/xen: use capabilities instead of fake cpuid values for mwait
  x86/xen: use capabilities instead of fake cpuid values for acpi
  x86/xen: use capabilities instead of fake cpuid values for acc
  x86/xen: use capabilities instead of fake cpuid values for mtrr
  x86/xen: use capabilities instead of fake cpuid values for aperf
  ...

Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)

Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.

If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Bug fix series.

The series contains minor bug fixes for qed/qede drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fail the configuration of advertised speed-autoneg value if the config
update is not supported.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently uses advertised-autoneg value to populate the
supported-autoneg field. When advertised field is updated, user gets
the same value for supported field. Supported-autoneg value need to be
populated from the link capabilities value returned by the MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Value for status block id could be more than 256 in 100G mode, need to
update its data type from u8 to u16.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.

I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>