- 15 Jun, 2017 4 commits
-
-
Ville Syrjälä authored
Pass down the correct acquire context to the pipe A quirk load detect hack during display resume. Avoids deadlocking the entire thing. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-2-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Chris Wilson authored
Currently the vma has one link member that is used for both holding its place in the execbuf reservation list, and in any eviction list. This dual property is quite tricky and error prone. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
This has the benefit of not requiring us to manipulate the vma->exec_link list when tearing down the execbuffer, and is a marginally cheaper test to detect the user error. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Combine the two slightly overlapping parameter structures we pass around the execbuffer routines into one. Signed-off-by:
-
- 14 Jun, 2017 16 commits
-
-
Lionel Landwerlin authored
Add OA support for Geminilake (pretty much identical to Broxton), and also add the associated OA configurations. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170613112309.4088-2-lionel.g.landwerlin@intel.com
-
Lionel Landwerlin authored
Add OA support for Kabylake (pretty much identical to Skylake), and also add the associated OA configurations. Signed-off-by:
-
Lionel Landwerlin authored
Add macros to detect GT2/GT3 skus so we can apply the proper OA configuration later. Signed-off-by:
-
Robert Bragg authored
In earlier iterations of the i915-perf driver we had a number of callbacks/hooks from other parts of the i915 driver to e.g. notify us when a legacy context was pinned and these could run asynchronously with respect to the stream file operations and might also run in atomic context. dev_priv->perf.hook_lock had been for serialising access to state needed within these callbacks, but as the code has evolved some of the hooks have gone away or are implemented to avoid needing to lock any state. The remaining use of this lock was actually redundant considering how the gen7 oacontrol state used to be updated as part of a context pin hook. Signed-off-by:
Robert Bragg <robert@sixbynine.org> Signed-off-by:
-
Robert Bragg authored
An oa_exponent_to_ns() utility and per-gen timebase constants where recently removed when updating the tail pointer race condition WA, and this restores those so we can update the _PROP_OA_EXPONENT validation done in read_properties_unlocked() to not assume we have a 12.5MHz timebase as we did for Haswell. Accordingly the oa_sample_rate_hard_limit value that's referenced by proc_dointvec_minmax defining the absolute limit for the OA sampling frequency is now initialized to (timestamp_frequency / 2) instead of the 6.25MHz constant for Haswell. v2: Specify frequency of 19.2MHz for BXT (Ville) Initialize oa_sample_rate_hard_limit per-gen too (Lionel) Signed-off-by: -
Robert Bragg authored
These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml Signed-off-by:
-
Robert Bragg authored
Enables access to OA unit metrics for BDW, CHV, SKL and BXT which all share (more-or-less) the same OA unit design. Of particular note in comparison to Haswell: some OA unit HW config state has become per-context state and as a consequence it is somewhat more complicated to manage synchronous state changes from the cpu while there's no guarantee of what context (if any) is currently actively running on the gpu. The periodic sampling frequency which can be particularly useful for system-wide analysis (as opposed to command stream synchronised MI_REPORT_PERF_COUNT commands) is perhaps the most surprising state to have become per-context save and restored (while the OABUFFER destination is still a shared, system-wide resource). This support for gen8+ takes care to consider a number of timing challenges involved in synchronously updating per-context state primarily by programming all config state from the cpu and updating all current and saved contexts synchronously while the OA unit is still disabled. The driver intentionally avoids depending on command streamer programming to update OA state considering the lack of synchronization between the automatic loading of OACTXCONTROL state (that includes the periodic sampling state and enable state) on context restore and the parsing of any general purpose BB the driver can control. I.e. this implementation is careful to avoid the possibility of a context restore temporarily enabling any out-of-date periodic sampling state. In addition to the risk of transiently-out-of-date state being loaded automatically; there are also internal HW latencies involved in the loading of MUX configurations which would be difficult to account for from the command streamer (and we only want to enable the unit when once the MUX configuration is complete). Since the Gen8+ OA unit design no longer supports clock gating the unit off for a single given context (which effectively stopped any progress of counters while any other context was running) and instead supports tagging OA reports with a context ID for filtering on the CPU, it means we can no longer hide the system-wide progress of counters from a non-privileged application only interested in metrics for its own context. Although we could theoretically try and subtract the progress of other contexts before forwarding reports via read() we aren't in a position to filter reports captured via MI_REPORT_PERF_COUNT commands. As a result, for Gen8+, we always require the dev.i915.perf_stream_paranoid to be unset for any access to OA metrics if not root. v5: Drain submitted requests when enabling metric set to ensure no lite-restore erases the context image we just updated (Lionel) v6: In addition to drain, switch to kernel context & update all context in place (Chris) v7: Add missing mutex_unlock() if switching to kernel context fails (Matthew) v8: Simplify OA period/flex-eu-counters programming by using the batchbuffer instead of modifying ctx-image (Lionel) v9: Back to updating the context image (due to erroneous testing, batchbuffer programming the OA unit doesn't actually work) (Lionel) Pin context before updating context image (Chris) Drop MMIO programming now that we switch to a kernel context with right values in initial context image (Chris) v10: Just pin_map the contexts we want to modify or let the configuration happen on first use (Chris) v11: Update kernel context OA config through the batchbuffer rather than on the fly ctx-image update (Lionel) v12: Rework OA context registers update again by swithing away from user contexts and reconfiguring the kernel context through the batchbuffer and updating all the other contexts' context image. Also take care to lock slice/subslice configuration when OA is on. (Lionel) v13: Request rpcs updates on all engine when updating the OA config (Lionel) v14: Drop any kind of rpcs management now that we monitor sseu configuration changes in a later patch (Lionel) Remove usleep after programming the NOA configs on Gen8+, this doesn't seem to be needed (Lionel) v15: Respect coding style for block comments (Chris) v16: Add missing i915_add_request() in case we fail to emit OA configuration (Matthew) Signed-off-by: -
Robert Bragg authored
Adds a static OA unit, MUX, B Counter + Flex EU configurations for basic render metrics on Broadwell, Cherryview, Skylake and Broxton. These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml WHITELIST=RenderBasic v2: add newlines to debug messages + fix comment (Matthew Auld) Signed-off-by:
-
Lionel Landwerlin authored
Gen8+ might have mux configurations per slices/subslices. Depending on whether slices/subslices have been fused off, only part of the configuration needs to be applied. This change reworks the mux configurations query mechanism to allow more than one set of registers to be programmed. v2: s/n_mux_regs/n_mux_configs/ (Matthew) Signed-off-by:
-
Robert Bragg authored
Assuming a uniform mask across all slices, this enables userspace to determine the specific sub slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW sub slice configuration. Signed-off-by:
-
Robert Bragg authored
Enables userspace to determine the maximum number of slices that can be enabled on the device and also know what specific slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW slice configuration. Signed-off-by:
-
Chris Wilson authored
I removed the zapping of the reservation_object->fence array of shared fences prematurely. We don't yet have the code to zap that array when retiring the object, and so currently it remains possible to continually grow the shared array trapping requests when reusing the batch_pool object across many timelines. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518094638.5469-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Having resolved whether or not we would deadlock upon a call to mutex_lock(&dev->struct_mutex), we can then spin for the contended struct_mutex if we are not the owner. We cannot afford to simply block and wait for the mutex, as the owner may itself be waiting for the allocator -- i.e. a cyclic deadlock. This should significantly improve the chance of running the shrinker for other processes whilst the GPU is busy. A more balanced approach would be to optimistically spin whilst the mutex owner was on the cpu and there was an opportunity to acquire the mutex for ourselves quickly. However, that requires support from kernel/locking/ and a new mutex_spin_trylock() primitive. Signed-off-by:
-
Chris Wilson authored
In our first pass, we do not want to use reclaim at all as we want to solely reap the i915 buffer caches (its purgeable pages). But we don't mind it initiates IO or pulls via the FS (but it shouldn't anyway as we say no to reclaim!). Just drop the GFP_IO constraint for simplicity. Signed-off-by:
-
Chris Wilson authored
I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It struggles with handling reclaim of our dirty buffers and relies on reclaim via kswapd. As a result, a single pass of direct reclaim is unreliable when i915 occupies the majority of available memory, and the only means of effectively waiting on kswapd to amke progress is by not setting the __GFP_NORETRY flag and lopping. That leaves us with the dilemma of invoking the oomkiller instead of propagating the allocation failure back to userspace where it can be handled more gracefully (one hopes). In the future we may have __GFP_MAYFAIL to allow repeats up until we genuinely run out of memory and the oomkiller would have been invoked. Until then, let the oomkiller wreck havoc. v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL v3: Update comments that direct reclaim only appears to be ignoring our dirty buffers! Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Testcase: igt/gem_tiled_swapping Signed-off-by:
-
Chris Wilson authored
Commit 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") made the bold decision to try and avoid the oomkiller by reporting -ENOMEM to userspace if our allocation failed after attempting to free enough buffer objects. In short, it appears we were giving up too easily (even before we start wondering if one pass of reclaim is as strong as we would like). Part of the problem is that if we only shrink just enough pages for our expected allocation, the likelihood of those pages becoming available to us is less than 100% To counter-act that we ask for twice the number of pages to be made available. Furthermore, we allow the shrinker to pull pages from the active list in later passes. v2: Be a little more cautious in paging out gfx buffers, and leave that to a more balanced approach from shrink_slab(). Important when combined with "drm/i915: Start writeback from the shrinker" as anything shrunk is immediately swapped out and so should be more conservative. Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
- 12 Jun, 2017 20 commits
-
-
Rodrigo Vivi authored
All here is pretty much like Kabylake. Including CFL-U has to use same ddi translation table as KBL-U for now. v2: Include missed IS_COFFEELAKE on edp trans table. (DK) Handle CFL-U with same translation table as KBL-U. (DK and confirmed with HW engineers) v3: Adding missed case for IS_CFL_ULT. (DK). v4: Duh! Now with the real IS_CFL_ULT instead of KBL one. (DK) Also use IS_GEN9_BC when possible. (DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497045770-21302-1-git-send-email-rodrigo.vivi@intel.com
-
Kahola, Mika authored
Enable wrpll computation for Cannonlake platform to support pll's required for HDMI output. The patch contains the following features - compute Cannonlake port clock programming dividers P, Q, and K. - compute PLL parameters for Cannonlake. These parameters set the values on DPLL registers. - find the register values to program wrpll for Cannonlake. The reference clock can be either 19.2MHz or 24MHz. v2: rebase v3: squash wrpll patches into one (Rodrigo) v4: switch order of getting even dividers (Paulo) update divider register values for PDiv and KDiv (Paulo) update wrpll computation algorithm (Paulo) v5: Remove ref clock division by 1000. (Rodrigo) v6: Rodrigo rebasing on top of latest code. Signed-off-by:Kahola, Mika <mika.kahola@intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-18-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
There is no platform specific change needed for LSPCON support on Cannonlake. So let's make it gen9+. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-17-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Also in a way that reuse bdw+ for all next platforms. Signed-off-by:
-
Rodrigo Vivi authored
As Geminilake scalers Cannonlake also don't need and don't have the "high quality" mode programming. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Since we have HAS_CSR tied to the platform definition let's use this instead of checking per platform. One less thing to worry when adding support to new platforms. Signed-off-by:
-
Anusha Srivatsa authored
This patch loads the DMC on CNL.The firmware version is 1.04. v2: (Rodrigo) Remove MODULE_FIRMWARE. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-13-git-send-email-rodrigo.vivi@intel.com
-
Clint Taylor authored
vswing programming sequence step 2 requires the Loadgen_select bit to be set in PORT_TX_DW4 lane reigsters per table defined by Bit rate and lane width. Implemented the change that was marked as FIXME in the driver. v2: (Rodrigo) checkpatch fixes. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-12-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. This new sequence for Cannonlake is more like Broxton style but still with different registers, different table and different steps. v2: Do not write to DW4_GRP to avoid overwrite individual loadgen. Fix PORT_CL_DW5 SUS Clock Config set. v3: As previous platforms use only eDP table if low voltage was requested. v4: fix Werror:maybe uninitialized (Paulo) v5: Rebase on top of dw2_swing_sel changes on previous patches. v6: Using flexible SCALING_MODE_SEL(x). Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
These tables are used on voltage wswing sequence initialization on Cannonlake. It is a complete new format now in use by the voltage swing team, not following any other standard in use by any other platform. Also the registers are different as well. So let's redefine the translation table for Cannonlake. The table is huge. So we minimized with the fields that are different or might be different anytime soon. The common values will be hardcoded on the voltage swing sequence. v2: Merge the lower and the upper bits to match the spec table and make review easier. This was possible with the good idea for Manasi with a better way to handle it on the bit macro definition presented on previous patch. Credits-to: Manasi Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
This are the registers and bits needed for the voltage swing sequence on Cannonlake. v2: Remove CL_DW5 that was wrongly defined. v3: Use (1 << 1) instead of (1<<1) as Paulo suggested Change DW2 swing sel upper and lower macros to do the bit selection instead of definint a table that doesn't match the spec. It is based on a Manasi version of it. Credits-to: Manasi. v4: Let SCALING_MODE_SEL flexible. (Manasi) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Also new registers can have different mmio offsets per different lane per port. v2: Use _PICK as PORT3 instead of creating a new macro with if per port. v3: Use _PICK directly on MMIO_PORT6. While MMIO_PORT isn't flexible enough let's continue with MMIO_PORT6 as we have MMIO_PORT3. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Although CNL follows PLL initialization more like Skylake than Broxton we have a completely different initialization sequence and registers used. One big difference from SKL is that CDCLK PLL is now exclusive (ADPLL) and for DDIs and MIPI we need to use DFGPLLs 0, 1 or 2. v2: Accept all Ander's suggestions and fixes: - Registers and bits names prefix - Group pll functions - bits masks fixes - remove read and modify on cfgcr1 - fix cfgcr0 setup v3: Set SSC_ENABLE for DP. Fix HDMI_MODE cfgcr0. Avoid touch cfgcr0 on DP. Add missed else on dpll_mgr definition so we use cnl one, not hsw. v3: Centra freq should be always set to default and change bits definitions to (1 << 1) instead of (1<<1). (by Paulo) v4: Rebased. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Reviewed-by:Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Kahola, Mika authored
DPLL's are defined in DPCLKA_CFGCR0 register (0x6C200). Let's use these definitions when computing dpll's for ddi ports. v2: (Rodrigo) Remove register that was defined in another patch with fixed name and more bits. Signed-off-by:Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-6-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
One of the steps for PLL (un)initialization is to (un)map the correspondent DDI that is actually using that PLL. So, let's do this step following the places already stablished and used so far, although spec put this as part of PLL initialization sequences. v2: Use proper prefix on bits names as suggested by Ander. v3: Add missed "~". Without that the logic was inverted so we were disabling interrupts. Credits-to: Clinton Credits-to: Art v4: Spec is getting updated to do DDI -> PLL mapping and clock on in 2 separated reg writes. (Paulo) Also update bits definitions to use space (1 << 1) instead of (1<<1). (Paulo) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: -
Rodrigo Vivi authored
All the low level cdclk bits are present, so let's add the required hooks to reconfigure cdclk on the fly. Cannonlake also needs to adjust the minimal pixel rate as gen9 platforms. Specially for the Azalia audio case. v2: Rebase due to cnl_sanitize_cdclk() v3: Rebased by Rodrigo on top of Ville's cdclk rework. v4: Rebase moving cnl_calc_cdclk up to follow same order as previous platforms. v2: Squash drm/i915/cnl: Adjust min pixel rate. to address the current limitation where CDCLK cannot be set to 168MHz if audio is used with 96MHz. (Imre) v3: adjust some of the clock limits within bdw_adjust_min_pipe_pixel_rate. (Ville/DK/Imre). Fix commit message messed by squash. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by:Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-4-git-send-email-rodrigo.vivi@intel.com
-
Ville Syrjälä authored
Implement the CNL display init/uninit sequence as outlined in Bspec. Quite similar to SKL/BXT. The main complicaiton is probably the extra procmon setup we must do based on the process/voltage information we can read out from some register. v2: s/skl_dbuf/gen9_dbuf/ to follow upstream bxt needed a cdclk sanitize step, so let's add it for cnl too v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander) v4: Rebased by Rodrigo after Ville's cdclk rework v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup Fix procpon Mask. (Credits-to Paulo and Clint) Remove A0 workaround. v6: Rebased on top of recent code (Rodrigo). v7: Respect the order of sanitize_ after set_ (Done by Rodrigo, Requested by Ville) v8: Commit message updated to matvh v5 changes besides Remove unused DW8 and an extra blank line. (all noticed by Imre). v9: Remove __attribute__((unused)) added on latest version of drm/i915/cnl: Implement .set_cdclk() for CNL. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: -
Ville Syrjälä authored
Add support for changing the cdclk frequency on CNL. Again, quite similar to BXT, but there are some annoying differences which means trying to share more code might not be feasible: * PLL ratio now lives in the PLL enable register * pcode came from SKL, not from BXT We support three cdclk frequencies: 168,336,528 Mhz. The first two use the same PLL frequency, the last one uses a different one meaning we once again may need to toggle the PLL off and on when changing cdclk. v2: Rebased by Rodrigo on top of Ville's cdclk rework. v3: Respect order of set_ bellow get_ (Ville) v4: Added __attribute__((unused)) to avoid broken compilation with Werror. Signed-off-by:
-
Ville Syrjälä authored
Add support for reading out the cdclk frequency from the hardware on CNL. Very similar to BXT, with a few new twists and turns: * the PLL is now called CDCLK PLL, not DE PLL * reference clock can be 24 MHz in addition to the 19.2 MHz BXT had * the ratio now lives in the PLL enable register * Only 1x and 2x CD2X dividers are supported v2: Deal with PLL lock bit the same way as BXT/SKL do now v3: DSSM refclk indicator is bit 31 not 24 (Ander) v4: Rebased by Rodrigo after Ville's cdclk rework. v5: Set cdclk to the ref clock as previous platforms. (Imre) Signed-off-by:
-
Maarten Lankhorst authored
Pass crtc_state to the enable callback, and connector_state to all callbacks. This will eliminate the need to guess for the correct pipe in these callbacks. The crtc state is required for pch_enable_backlight to obtain the correct cpu_transcoder. intel_dp_aux_backlight's setup function is called before hw readout, so crtc_state and connector_state->best_encoder are NULL in the enable() and set() callbacks. This fixes the following series of warns from intel_get_pipe_from_connector: [ 219.968428] ------------[ cut here ]------------ [ 219.968481] WARNING: CPU: 3 PID: 2457 at drivers/gpu/drm/i915/intel_display.c:13881 intel_get_pipe_from_connector+0x62/0x90 [i915] [ 219.968483] WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)) [ 219.968485] Modules linked in: nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm intel_rapl x86_pkg_temp_thermal coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_seq snd_seq_device serio_raw snd_timer aesni_intel aes_x86_64 crypto_simd glue_helper cryptd lpc_ich snd mei_me shpchp soundcore mei rfkill_gpio mac_hid intel_pmc_ipc parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid igb ahci i915 xhci_pci dca xhci_hcd ptp sdhci_pci sdhci libahci pps_core i2c_hid hid video [ 219.968573] CPU: 3 PID: 2457 Comm: kworker/u8:3 Tainted: G W 4.10.0-tip-201703010159+ #2 [ 219.968575] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0144.B10.1606270006 06/27/2016 [ 219.968627] Workqueue: events_unbound intel_atomic_commit_work [i915] [ 219.968629] Call Trace: [ 219.968640] dump_stack+0x63/0x87 [ 219.968646] __warn+0xd1/0xf0 [ 219.968651] warn_slowpath_fmt+0x4f/0x60 [ 219.968657] ? drm_printk+0x97/0xa0 [ 219.968708] intel_get_pipe_from_connector+0x62/0x90 [i915] [ 219.968756] intel_panel_enable_backlight+0x19/0xf0 [i915] [ 219.968804] intel_edp_backlight_on.part.22+0x33/0x40 [i915] [ 219.968852] intel_edp_backlight_on+0x18/0x20 [i915] [ 219.968900] intel_enable_ddi+0x94/0xc0 [i915] [ 219.968950] intel_encoders_enable.isra.93+0x77/0x90 [i915] [ 219.969000] haswell_crtc_enable+0x310/0x7f0 [i915] [ 219.969051] intel_update_crtc+0x58/0x100 [i915] [ 219.969101] skl_update_crtcs+0x218/0x240 [i915] [ 219.969153] intel_atomic_commit_tail+0x350/0x1000 [i915] [ 219.969159] ? vtime_account_idle+0xe/0x50 [ 219.969164] ? finish_task_switch+0x107/0x250 [ 219.969214] intel_atomic_commit_work+0x12/0x20 [i915] [ 219.969219] process_one_work+0x153/0x3f0 [ 219.969223] worker_thread+0x12b/0x4b0 [ 219.969227] kthread+0x101/0x140 [ 219.969230] ? rescuer_thread+0x340/0x340 [ 219.969233] ? kthread_park+0x90/0x90 [ 219.969237] ? do_syscall_64+0x6e/0x180 [ 219.969243] ret_from_fork+0x2c/0x40 [ 219.969246] ---[ end trace 0a8fa19387b9ad6d ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100022Signed-off-by:
-
