Note the !dchild->d_inode case can leak the filehandle.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Make the return from compose_entry_fh() zero or an error, even though
the returned error isn't used, just to make the meaning of the return
immediately obvious.

Move some repeated code out of main function into helper.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

A number of callers (nfsd4_encode_fattr(), at least) don't bother to
release the filehandle returned to fh_compose() if fh_compose() returns
an error.  So, modify fh_compose() to release the filehandle before
returning an error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

nfsd4_path() allocates a temporary filehandle and then fails to free it
before the function exits, leaking reference counts to the dentry and
export that it refers to.

Also, nfsd4_lookupp() puts the result of exp_pseudoroot() in a temporary
filehandle which it releases on success of exp_pseudoroot() but not on
failure; fix exp_pseudoroot to ensure that on failure it releases the
filehandle before returning.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

More trivial cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Use NFSD_SLOT_CACHE_SIZE size buffers for sessions DRC instead of holding nfsd
pages in cache.

Connectathon testing has shown that 1024 bytes for encoded compound operation
responses past the sequence operation is sufficient, 512 bytes is a little too
small. Set NFSD_SLOT_CACHE_SIZE to 1024.

Allocate memory for the session DRC in the CREATE_SESSION operation
to guarantee that the memory resource is available for caching responses.
Allocate each slot individually in preparation for slot table size negotiation.

Remove struct nfsd4_cache_entry and helper functions for the old page-based
DRC.

The iov_len calculation in nfs4svc_encode_compoundres is now always
correct.  Replay is now done in nfsd4_sequence under the state lock, so
the session ref count is only bumped on non-replay. Clean up the
nfs4svc_encode_compoundres session logic.

The nfsd4_compound_state statp pointer is also not used.
Remove nfsd4_set_statp().

Move useful nfsd4_cache_entry fields into nfsd4_slot.

Signed-off-by: Andy Adamson <andros@netapp.com
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

nfserr_resource is not a legal error for NFSv4.1. Replace it with
nfserr_serverfault for EXCHANGE_ID and CREATE_SESSION processing.

We will also need to map nfserr_resource to other errors in routines shared
by NFSv4.0 and NFSv4.1
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

This fixes a bug in the sequence operation reply.

The sequence operation returns the highest slotid it will accept in the future
in sr_highest_slotid, and the highest slotid it prefers the client to use.
Since we do not re-negotiate the session slot table yet, these should both
always be set to the session ca_maxrequests.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound
a forechannel drc request size, clients can tailor a session to usage.

For example, an I/O session (READ/WRITE only) can have a much smaller
ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger
ca_maxresponses to service a large in-flight data window.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The fact that the filesystem doesn't currently list any alternate
locations does _not_ imply that the fs_locations attribute should be
marked as "unsupported".
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Compounds consisting of only a sequence operation don't need any
additional caching beyond the sequence information we store in the slot
entry.  Fix nfsd4_is_solo_sequence to identify this case correctly.

The additional check for a failed sequence in nfsd4_store_cache_entry()
is redundant, since the nfsd4_is_solo_sequence call lower down catches
this case.

The final ce_cachethis set in nfsd4_sequence is also redundant.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

RFC 3530 says "ACE4_IDENTIFIER_GROUP flag MUST be ignored on entries
with these special identifiers.  When encoding entries with these
special identifiers, the ACE4_IDENTIFIER_GROUP flag SHOULD be set to
zero."  It really shouldn't matter either way, but the point is that
this flag is used to distinguish named users from named groups (since
unix allows a group to have the same name as a user), so it doesn't
really make sense to use it on a special identifier such as this.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

sunrpc: "Move close processing to a single place"
(d7979ae4) moved the
close processing before the recvfrom method. This may
cause the close processing never to execute. So this
patch moves it to the right place.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Until we work out the state locking so we can use a spin lock to protect
the cl_lru, we need to take the state_lock to renew the client.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: Do not renew state on error]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: Simplify exit code]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

When an RPC message is received with RPCSEC_GSS with an unknown service
(not RPC_GSS_SVC_NONE, RPC_GSS_SVC_INTEGRITY, or RPC_GSS_SVC_PRIVACY),
svcauth_gss_accept() returns AUTH_BADCRED, but svcauth_gss_release()
subsequently drops the response entirely, discarding the error.

Fix that so the AUTH_BADCRED error is returned to the client.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

lock_kernel() in knfsd was replaced with a mutex. The later
commit 03cf6c9f ("knfsd:
add file to export stats about nfsd pools") did not follow
that change. This patch fixes the issue.

Also move the get and put of nfsd_serv to the open and close methods
(instead of start and stop methods) to allow atomic check and increment
of reference count in the open method (where we can still return an
error).
Signed-off-by: Ryusei Yamaguchi <mandel59@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Greg Banks <gnb@fmeh.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The group deny entries end up denying tcy even though tcy was just
allowed by the allow entry. This appears to be due to:
	ace->access_mask = mask_from_posix(deny, flags);
instead of:
	ace->access_mask = deny_mask_from_posix(deny, flags);

Denying a previously allowed bit has no effect, so this shouldn't affect
behavior, but it's ugly.
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Factor functionality out of svc_tcp_recvfrom() to simplify routine
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

When a SETCLIENTID call comes in, one of the args given is the svc_rqst.
This struct contains an rq_addr field which holds the address that sent
the call. If this is an IPv6 address, then we can use the sin6_scope_id
field in this address to populate the sin6_scope_id field in the
callback address.

AFAICT, the rq_addr.sin6_scope_id is non-zero if and only if the client
mounted the server's link-local address.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The framework to add this is all in place. Now, add the code to allow
support for establishing a callback channel on an IPv6 socket.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

...rather than as a separate address and port fields. This will be
necessary for implementing callbacks over IPv6. Also, convert
gen_callback to use the standard rpcuaddr2sockaddr routine rather than
its own private one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

It's currently a __be32, which isn't big enough to hold an IPv6 address.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

lockd needs these sort of routines, as does the NFSv4 callback code.

Move lockd's routines into common code and rename them so that they can
be used by others.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming

Conflicts:
	net/sunrpc/cache.c

We can oops if rpc_pipefs isn't properly initialised before we start to set
up objects that depend upon it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This include is needed for the definition of delayed_work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

generic_file_direct_write() no longer calls generic_osync_inode() so remove the
comment.

CC: linux-nfs@vger.kernel.org
CC: Neil Brown <neilb@suse.de>
CC: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Otherwise we Oops if the module containing the cache detail is removed
before all cache readers have closed the file.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In the referral code, use it to look up the new server's ip address if the
fs_locations attribute contains a hostname.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client
from one server to another in order to support filesystem migration and
replication. For full protocol support, we need to add the ability to
convert a DNS host name into an IP address that we can feed to the RPC
client.

We'll reuse the sunrpc cache, now that it has been converted to work with
rpc_pipefs.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We want the channel to be a regular file, so that we don't need to supply
rpc_pipe_ops.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Conflicts:
	fs/nfs/nfs4xdr.c

do not increment decoding ptr if not needed.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Use xdr_inline_decode instead.
Open code debug printout and error return.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Just directly call memcpy.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Trond: Fixed up an 'uninitialised variable' issue in decode_readdir]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>