- 23 Dec, 2023 1 commit
-
-
Anshul Dalal authored
Convert devicetree binding documentation for ti drv2665 and drv2667 haptics driver to json-schema. The previously two separate bindings have been merged into a single drv266x.yaml. Signed-off-by:
Anshul Dalal <anshulusr@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231221183109.684325-1-anshulusr@gmail.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 Dec, 2023 3 commits
-
-
Biju Das authored
Replace dev_err()->dev_err_probe() to simplify probe(). Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20231213214803.9931-4-biju.das.jz@bp.renesas.comSigned-off-by:
-
Biju Das authored
The memory allocation core code already prints error message in case of OOM. So, drop additional print messages for OOM cases. While at it, input_register_device() is already printing error messages on failure. Drop the redundant print. Signed-off-by:
-
Biju Das authored
Simplify probe() by replacing of_match_node() for retrieving match data by device_get_match_data(). Some minor cleanups: * Remove the trailing comma in the terminator entry for the OF table making code robust against (theoretical) misrebases or other similar things where the new entry goes _after_ the termination without the compiler noticing. * Move OF table near to the user. * Arrange variables in reverse xmas tree order in probe(). Signed-off-by:
-
- 14 Dec, 2023 11 commits
-
-
Linus Walleij authored
This driver does not have any in-tree users but is passing a legacy GPIO number through platform data. Convert it to use a GPIO descriptor, new users or outoftree users can easily be implemented using GPIO descriptor tables or software nodes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231129-descriptors-input-v1-4-9433162914a3@linaro.orgSigned-off-by:
-
Linus Walleij authored
The driver supports passing some GPIO lines for rows and columns through the driver data, but there is no in-kernel user of this. Further the use seems convoluted because the GPIO lines are unused in the driver, then explicitly free:ed when removing it without being requested when probing it, which is assymetric and just a recepie for disaster. Remove the support for these unused GPIOs, if need be support can be reestablished in an organized fashion using GPIO descriptors. Signed-off-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231129-descriptors-input-v1-3-9433162914a3@linaro.orgSigned-off-by:
-
Linus Walleij authored
The TCA6416 keypad driver is including the legacy GPIO header <linux/gpio.h> for no reason, it is not using any of its symbols. Drop the header. Signed-off-by:
-
Linus Walleij authored
The Navpoint driver uses a GPIO line, convert this to use a GPIO descriptor. There are no in-kernel users but out of tree users can easily be added or converted using a GPIO descriptor table as with numerous other drivers. Signed-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212071644171074630@zte.com.cnSigned-off-by:
-
ye xingchen authored
Replace calls to scnprintf() in the methods showing device attributes with sysfs_emit() to simplify the code. Signed-off-by:
-
ye xingchen authored
Replace calls to scnprintf() in the methods showing device attributes with sysfs_emit() to simplify the code. Signed-off-by:
-
ye xingchen authored
Replace calls to scnprintf() in the methods showing device attributes with sysfs_emit() to simplify the code. Signed-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by:
-
ye xingchen authored
Replace the calls to various *printf() functions with sysfs_emit() to simplify the code. Signed-off-by:
-
ye xingchen authored
Replace calls to scnprintf() in the methods showing device attributes with sysfs_emit() to simplify the code. Signed-off-by:
-
- 13 Dec, 2023 6 commits
-
-
Marek Szyprowski authored
Add the needed device-tree compatible strings to the MAX77693 haptic driver, so it can be automatically loaded when compiled as a kernel module and given device-tree contains separate (i.e. 'motor-driver') node under the main PMIC node. When device is instantiated from device-tree, the driver data cannot be read via platform_get_device_id(), so get device type from the parent MFD device instead, what works for both cases. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Mark Brown authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231001-input-maple-v1-3-ed3716051431@kernel.orgSigned-off-by:
-
Mark Brown authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Mark Brown authored
The cap11xx devices have three hardware identification registers which are currently marked as volatile, preventing caching of those registers. This is not ideal since the registers should never change at runtime, we should be able to cache the value after the first read. Stop marking the registers as volatile, we don't have register defaults specified in the driver so this will result in reading from the hardware on first use. Signed-off-by:
-
Jiri Valek - 2N authored
Add support for advanced sensitivity settings that allows more precise tunig of touch buttons. Input-treshold allows to set the sensitivity for each channel separately. Also add signal guard feature for CAP129x chips. Signed-off-by:
Jiri Valek - 2N <jiriv@axis.com> Link: https://lore.kernel.org/r/20231121155250.613242-3-jiriv@axis.comSigned-off-by:
-
Jiri Valek - 2N authored
Add support for advanced sensitivity settings and signal guard feature. Signed-off-by:
-
- 12 Dec, 2023 2 commits
-
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/a3e30e30f18cc5d6f032c8013ce9d900c8e223e5.1702228806.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Andreas Kemnade authored
According to SWPU235AB, table 26-6, fclk is required to generate events at least on OMAP4460, so keep fclk enabled all the time the device is opened. Suggested-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
-
- 10 Dec, 2023 1 commit
-
-
Marcus Folkesson authored
Use the guard(mutex) macro for handle mutex lock/unlocks. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20231202-pxrc-guard-v3-1-2ca8bc8cf689@gmail.comSigned-off-by:
-
- 08 Dec, 2023 1 commit
-
-
Anshul Dalal authored
Convert device tree binding documentation for GPIO attached mouse to json-schema. Signed-off-by:
-
- 30 Nov, 2023 2 commits
-
-
Tony Lindgren authored
Some SoCs have a separate dedicated wake-up interrupt controller that can be used to wake up the system from deeper idle states. We already support configuring a separate interrupt for a gpio-keys button to be used with a gpio line. However, we are lacking support system suspend for cases where a separate interrupt needs to be used in deeper sleep modes. Because of it's nature, gpio-keys does not know about the runtime PM state of the button gpios, and may have several gpio buttons configured for each gpio-keys device instance. Implementing runtime PM support for gpio-keys does not help, and we cannot use drivers/base/power/wakeirq.c support. We need to implement custom wakeirq support for gpio-keys. For handling a dedicated wakeirq for system suspend, we enable and disable it with gpio_keys_enable_wakeup() and gpio_keys_disable_wakeup() that we already use based on device_may_wakeup(). Some systems may have a dedicated wakeirq that can also be used as the main interrupt, this is already working for gpio-keys. Let's add some wakeirq related comments while at it as the usage with a gpio line and separate interrupt line may not be obvious. Tested-by:
Dhruva Gole <d-gole@ti.com> Signed-off-by:
-
Tony Lindgren authored
Allow configuring an optional dedicated wakeirq for gpio-keys that some SoCs have. Let's use the common interrupt naming "irq" and "wakeup" that we already have in use for some drivers and subsystems like i2c framework. Note that the gpio-keys interrupt property is optional. If only a gpio property is specified, the driver tries to translate the gpio into an interrupt. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 29 Nov, 2023 2 commits
-
-
Rob Herring authored
The example for the Mediatek PMIC keys is incomplete as the binding is the full PMIC, not just the sub-functions. It is preferred for MFD examples to be complete in the top-level MFD device binding rather than piecemeal in each sub-function binding. This also fixes an undocumented (by schema) compatible warning for "mediatek,mt6397". Signed-off-by:
-
Rob Herring authored
The example for the Spreadtrum SC27xx PMIC vibrator is incomplete as the binding is the full PMIC, not just the sub-functions. It is preferred for MFD examples to be complete in the top-level MFD device binding rather than piecemeal in each sub-function binding. This also fixes an undocumented (by schema) compatible warning for "sprd,sc2731". Signed-off-by:
-
- 17 Nov, 2023 1 commit
-
-
Jiri Valek - 2N authored
Separate IRQ parsing is not necessary, I2C core do the job. Signed-off-by:
-
- 15 Nov, 2023 1 commit
-
-
Krzysztof Kozlowski authored
Convert Samsung S6SY761 touchscreen controller bindings to DT schema. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231111143221.55452-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
- 29 Oct, 2023 3 commits
-
-
Li Zetao authored
Use the module_parport_driver macro to simplify the code, which is the same as declaring with module_init() and module_exit(). Signed-off-by:
Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230815080107.1089401-1-lizetao1@huawei.comSigned-off-by:
-
Dan Carpenter authored
The put_device() calls rmi_release_function() which frees "fn" so the dereference on the next line "fn->num_of_irqs" is a use after free. Move the put_device() to the end to fix this. Fixes: 24d28e4f ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountainSigned-off-by:
-
Fabio Estevam authored
The SCU Key controller can be used as a system wakeup source. Document the 'wakeup-source' property. This fixes the following schema warning: system-controller: keys: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
-
- 27 Oct, 2023 2 commits
-
-
Lin, Meng-Bo authored
The Cypress touchscreen controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Implement support for a "vddio-supply" that is enabled by the cyttsp5 driver so that the regulator gets enabled when needed. Signed-off-by:
Lin, Meng-Bo <linmengbo0689@protonmail.com> Acked-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20221117190507.87535-3-linmengbo0689@protonmail.comSigned-off-by:
-
Lin, Meng-Bo authored
The Samsung touchscreen controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Document support for a "vddio-supply" that is enabled by the cyttsp5 driver so that the regulator gets enabled when needed. Signed-off-by:
-
- 14 Oct, 2023 2 commits
-
-
Rob Herring authored
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20231006224432.442709-1-robh@kernel.orgSigned-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct ff_device. Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231006201739.work.350-kees@kernel.orgSigned-off-by:
-
- 30 Sep, 2023 2 commits
-
-
Justin Stitt authored
This code is doing more work than it needs to. Before handing off `val_str` to `kstrtouint()` we are eagerly removing any trailing newline which requires copying `buf`, validating it's length and checking/replacing any potential newlines. kstrtouint() handles this implicitly: kstrtouint -> kstrotoull -> (documentation) | /** | * kstrtoull - convert a string to an unsigned long long | * @s: The start of the string. The string must be null-terminated, and may also | * include a single newline before its terminating null. The first character | ... Let's remove the redundant functionality and let kstrtouint handle it. Suggested-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct input_mt. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocciSigned-off-by:
-
