- 29 Aug, 2024 40 commits
-
-
Hongbo Li authored
The deprecated helper strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Signed-off-by:
Hongbo Li <lihongbo22@huawei.com> Link: https://patch.msgid.link/20240828123224.3697672-6-lihongbo22@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Hongbo Li authored
The deprecated helper strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Signed-off-by:
-
Hongbo Li authored
The deprecated helper strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Signed-off-by:
-
Hongbo Li authored
The deprecated helper strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() [1]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/faraday/ftgmac100.c 4186c8d9 ("net: ftgmac100: Ensure tx descriptor updates are visible") e24a6c87 ("net: ftgmac100: Get link speed and duplex for NC-SI") https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org net/ipv4/tcp.c bac76cf8 ("tcp: fix forever orphan socket caused by tcp_abort") edefba66 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset") https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au No adjacent changes. Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.comSigned-off-by:
-
Yang Ruibin authored
use dev_err_probe() instead of dev_err() to simplify the error path and standardize the format of the error code. Signed-off-by:
Yang Ruibin <11162571@vivo.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240828122650.1324246-1-11162571@vivo.comSigned-off-by:
-
Hongbo Li authored
Use the IS_ERR_OR_NULL() helper instead of open-coding a NULL and an error pointer checks to simplify the code and improve readability. Signed-off-by:
-
Hongbo Li authored
Using dev_err_cast_probe() to simplify the code. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://patch.msgid.link/20240828121805.3696631-1-lihongbo22@huawei.comSigned-off-by:
-
Hongbo Li authored
Using dev_err_cast_probe() to simplify the code. Signed-off-by:
-
Jakub Kicinski authored
Stefan Wahren says: ==================== net: vertexcom: mse102x: Minor clean-ups This series provides some minor clean-ups for the Vertexcom MSE102x driver. ==================== Link: https://patch.msgid.link/20240827191000.3244-1-wahrenst@gmx.netSigned-off-by:
-
Stefan Wahren authored
There is already a define for minimum Ethernet frame length without FCS. So used this instead of the magic number. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240827191000.3244-6-wahrenst@gmx.netSigned-off-by:
-
Stefan Wahren authored
This message is a leftover from initial development. It's unnecessary now and can be dropped. Signed-off-by:
-
Stefan Wahren authored
At the time of MAC address assignment the netdev is not registered yet, so netdev log functions won't work as expected. While we are at this downgrade the log level to a warning, because a random MAC address is not a real error. Signed-off-by:
-
Stefan Wahren authored
As long as the MSE102x is not operational, every packet transmission will run into a TX timeout and flood the kernel log. So log only the first TX timeout and a user is at least informed about this issue. The amount of timeouts are still available via netstat. Signed-off-by:
-
Stefan Wahren authored
This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't have to care about when the functions are actually used. Also make use of pm_sleep_ptr() to discard all PM_SLEEP related stuff if CONFIG_PM_SLEEP isn't enabled. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth, wireless and netfilter. No known outstanding regressions. Current release - regressions: - wifi: iwlwifi: fix hibernation - eth: ionic: prevent tx_timeout due to frequent doorbell ringing Previous releases - regressions: - sched: fix sch_fq incorrect behavior for small weights - wifi: - iwlwifi: take the mutex before running link selection - wfx: repair open network AP mode - netfilter: restore IP sanity checks for netdev/egress - tcp: fix forever orphan socket caused by tcp_abort - mptcp: close subflow when receiving TCP+FIN - bluetooth: fix random crash seen while removing btnxpuart driver Previous releases - always broken: - mptcp: more fixes for the in-kernel PM - eth: bonding: change ipsec_lock from spin lock to mutex - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response Misc: - documentation: drop special comment style for net code" * tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) nfc: pn533: Add poll mod list filling check mailmap: update entry for Sriram Yagnaraman selftests: mptcp: join: check re-re-adding ID 0 signal mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: validate event numbers mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: pm: fix ID 0 endp usage after multiple re-creations mptcp: pm: do not remove already closed subflows selftests: mptcp: join: no extra msg if no counter selftests: mptcp: join: check re-adding init endp with != id mptcp: pm: reset MPC endp ID when re-added mptcp: pm: skip connecting to already established sf mptcp: pm: send ACK on an active subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: fix RM_ADDR ID for the initial subflow mptcp: pm: reuse ID 0 after delete and re-add net: busy-poll: use ktime_get_ns() instead of local_clock() sctp: fix association labeling in the duplicate COOKIE-ECHO case mptcp: pr_debug: add missing \n at the end ... -
Aleksandr Mishin authored
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f5 ("NFC: pn533: Add some polling entropy") Signed-off-by:Aleksandr Mishin <amishin@t-argos.ru> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ruSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.orgSigned-off-by:
-
Sriram Yagnaraman authored
Link my old est.tech address to my active mail address Signed-off-by:
Sriram Yagnaraman <sriram.yagnaraman@ericsson.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.comSigned-off-by:
-
Paolo Abeni authored
Matthieu Baerts says: ==================== mptcp: more fixes for the in-kernel PM Here is a new batch of fixes for the MPTCP in-kernel path-manager: Patch 1 ensures the address ID is set to 0 when the path-manager sends an ADD_ADDR for the address of the initial subflow. The same fix is applied when a new subflow is created re-using this special address. A fix for v6.0. Patch 2 is similar, but for the case where an endpoint is removed: if this endpoint was used for the initial address, it is important to send a RM_ADDR with this ID set to 0, and look for existing subflows with the ID set to 0. A fix for v6.0 as well. Patch 3 validates the two previous patches. Patch 4 makes the PM selecting an "active" path to send an address notification in an ACK, instead of taking the first path in the list. A fix for v5.11. Patch 5 fixes skipping the establishment of a new subflow if a previous subflow using the same pair of addresses is being closed. A fix for v5.13. Patch 6 resets the ID linked to the initial subflow when the linked endpoint is re-added, possibly with a different ID. A fix for v6.0. Patch 7 validates the three previous patches. Patch 8 is a small fix for the MPTCP Join selftest, when being used with older subflows not supporting all MIB counters. A fix for a commit introduced in v6.4, but backported up to v5.10. Patch 9 avoids the PM to try to close the initial subflow multiple times, and increment counters while nothing happened. A fix for v5.10. Patch 10 stops incrementing local_addr_used and add_addr_accepted counters when dealing with the address ID 0, because these counters are not taking into account the initial subflow, and are then not decremented when the linked addresses are removed. A fix for v6.0. Patch 11 validates the previous patch. Patch 12 avoids the PM to send multiple SUB_CLOSED events for the initial subflow. A fix for v5.12. Patch 13 validates the previous patch. Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it in order to re-create the initial subflow if it has been closed, even if the limit for *new* addresses -- not taking into account the address of the initial subflow -- has been reached. A fix for v5.10. Patch 15 validates the previous patch. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> --- Matthieu Baerts (NGI0) (15): mptcp: pm: reuse ID 0 after delete and re-add mptcp: pm: fix RM_ADDR ID for the initial subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: send ACK on an active subflow mptcp: pm: skip connecting to already established sf mptcp: pm: reset MPC endp ID when re-added selftests: mptcp: join: check re-adding init endp with != id selftests: mptcp: join: no extra msg if no counter mptcp: pm: do not remove already closed subflows mptcp: pm: fix ID 0 endp usage after multiple re-creations selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: validate event numbers mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: check re-re-adding ID 0 signal net/mptcp/pm.c | 4 +- net/mptcp/pm_netlink.c | 87 ++++++++++---- net/mptcp/protocol.c | 6 + net/mptcp/protocol.h | 5 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++---- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 + 6 files changed, 209 insertions(+), 50 deletions(-) --- base-commit: 3a0504d5 change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817 Best regards, ==================== Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete re-add signal" to validate the previous commit: when the 'signal' endpoint linked to the initial subflow (ID 0) is re-added multiple times, it will re-send the ADD_ADDR with id 0. The client should still be able to re-create this subflow, even if the add_addr_accepted limit has been reached as this special address is not considered as a new address. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
The ADD_ADDR 0 with the address from the initial subflow should not be considered as a new address: this is not something new. If the host receives it, it simply means that the address is available again. When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider it as new by not incrementing the 'add_addr_accepted' counter. But the 'accept_addr' might not be set if the limit has already been reached: this can be bypassed in this case. But before, it is important to check that this ADD_ADDR for the ID 0 is for the same address as the initial subflow. If not, it is not something that should happen, and the ADD_ADDR can be ignored. Note that if an ADD_ADDR is received while there is already a subflow opened using the same address, this ADD_ADDR is ignored as well. It means that if multiple ADD_ADDR for ID 0 are received, there will not be any duplicated subflows created by the client. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete and re-add" and "delete re-add signal" to validate the previous commit: the number of MPTCP events are checked to make sure there are no duplicated or unexpected ones. A new helper has been introduced to easily check these events. The missing events have been added to the lib. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b911c97c ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow might have already been closed, but still in the connection list. When the worker is instructed to close the subflows that have been marked as closed, it might then try to close the initial subflow again. A consequence of that is that the SUB_CLOSED event can be seen twice: # ip mptcp endpoint 1.1.1.1 id 1 subflow dev eth0 2.2.2.2 id 2 subflow dev eth1 # ip mptcp monitor & [ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9 # ip mptcp endpoint delete id 1 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the second one from __mptcp_close_subflow(). To avoid doing the post-closed processing twice, the subflow is now marked as closed the first time. Note that it is not enough to check if we are dealing with the first subflow and check its sk_state: the subflow might have been reset or closed before calling mptcp_close_ssk(). Fixes: b911c97c ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Tested-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete and re-add" to validate the previous commit: when the endpoint linked to the initial subflow (ID 0) is re-added multiple times, it was no longer being used, because the internal linked counters are not decremented for this special endpoint: it is not an additional endpoint. Here, the "del/add id 0" steps are done 3 times to unsure this case is validated. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. Reported-by:
-
Matthieu Baerts (NGI0) authored
It is possible to have in the list already closed subflows, e.g. the initial subflow has been already closed, but still in the list. No need to try to close it again, and increments the related counters again. Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The checksum and fail counters might not be available. Then no need to display an extra message with missing info. While at it, fix the indentation around, which is wrong since the same commit. Fixes: 47867f0a ("selftests: mptcp: join: skip check if MIB counter not supported") Cc: stable@vger.kernel.org Reviewed-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID, but the kernel should still use the ID 0 if it corresponds to the initial address. This test validates this behaviour: the endpoint linked to the initial subflow is removed, and re-added with a different ID. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID -- most services managing the endpoints automatically don't force the ID to be the same as before. It is then important to track these modifications to be consistent with the ID being used for the address used by the initial subflow, not to confuse the other peer or to send the ID 0 for the wrong address. Now when removing an endpoint, msk->mpc_endpoint_id is reset if it corresponds to this endpoint. When adding a new endpoint, the same variable is updated if the address match the one of the initial subflow. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The lookup_subflow_by_daddr() helper checks if there is already a subflow connected to this address. But there could be a subflow that is closing, but taking time due to some reasons: latency, losses, data to process, etc. If an ADD_ADDR is received while the endpoint is being closed, it is better to try connecting to it, instead of rejecting it: the peer which has sent the ADD_ADDR will not be notified that the ADD_ADDR has been rejected for this reason, and the expected subflow will not be created at the end. This helper should then only look for subflows that are established, or going to be, but not the ones being closed. Fixes: d84ad049 ("mptcp: skip connecting the connected address") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Taking the first one on the list doesn't work in some cases, e.g. if the initial subflow is being removed. Pick another one instead of not sending anything. Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Removing the endpoint linked to the initial subflow should trigger a RM_ADDR for the right ID, and the removal of the subflow. That's what is now being verified in the "delete and re-add" test. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. When an endpoint is being deleted, it is then important to check if its address is not linked to the initial subflow to send the right ID. If there was an endpoint linked to the initial subflow, msk's mpc_endpoint_id field will be set. We can then use this info when an endpoint is being removed to see if it is linked to the initial subflow. So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(), it is no longer needed to use mptcp_local_id_match(). Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
When the endpoint used by the initial subflow is removed and re-added later, the PM has to force the ID 0, it is a special case imposed by the MPTCP specs. Note that the endpoint should then need to be re-added reusing the same ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Florian Westphal authored
The sctp selftest is very slow on debug kernels. Reported-by:
Florian Westphal <fw@strlen.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240827090023.8917-1-fw@strlen.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull random number generator fix from Jason Donenfeld: "Reject invalid flags passed to vgetrandom() in the same way that getrandom() does, so that the behavior is the same, from Yann. The flags argument to getrandom() only has a behavioral effect on the function if the RNG isn't initialized yet, so vgetrandom() falls back to the syscall in that case. But if the RNG is initialized, all of the flags behave the same way, so vgetrandom() didn't bother checking them, and just ignored them entirely. But that doesn't account for invalid flags passed in, which need to be rejected so we can use them later" * tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: vDSO: reject unknown getrandom() flags
-
Jakub Kicinski authored
Krzysztof Kozlowski says: ==================== net: hisilicon: minor fixes Minor fixes for hisilicon ethernet driver which look too trivial to be considered for current RC. ==================== Link: https://patch.msgid.link/20240827144421.52852-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by:
-
Krzysztof Kozlowski authored
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info(). Signed-off-by:
-
