- 27 Jan, 2020 40 commits
-
-
Vasundhara Volam authored
Instead of switch_id, renaming it to dsn will be more meaningful so that it can be used to display device serial number in follow up patch via devlink_info command. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
This patch adds status notification to devlink flash update while flashing is in progress. $ devlink dev flash pci/0000:05:00.0 file 103.pkg Preparing to flash Flashing done Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Latest kernels get the phys_port_name via devlink, if ndo_get_phys_port_name is not defined. To provide the phys_port_name correctly, register devlink before registering netdev. Also call devlink_port_type_eth_set() after registering netdev as devlink port updates the netdev structure and notifies user. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
This will allow to register for devlink port and use port features. Also register params only if firmware spec version is at least 0x10600 which will support reading/setting numbered variables in NVRAM. Signed-off-by:
-
Vasundhara Volam authored
Define bnxt_dl_params_register() and bnxt_dl_params_unregister() functions and move params register/unregister code to these newly defined functions. This patch is in preparation to register devlink irrespective of firmware spec. version in the next patch. Signed-off-by:
-
Michael Chan authored
The hardware bug has been fixed on B0 and newer chips, so disable the workaround on these chips. Signed-off-by:
-
Pavan Chebbi authored
Currently the only time we check and remove expired filters is when we are inserting new filters. Improving the aRFS expiry handling by adding code to do the above work periodically. Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Michael Chan authored
In bnxt_rx_flow_steer(), if the dissected packet is a fragment, do not proceed to create the ntuple filter and return error instead. Otherwise we would create a filter with 0 source and destination ports because the dissected ports would not be available for fragments. Signed-off-by:
-
Michael Chan authored
575XX (P5) chips have the same UDP RSS hashing capability as P4 chips, so we can enable it on P5 chips. Signed-off-by:
-
Michael Chan authored
The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by:
-
Michael Chan authored
If the 2nd parameter fw_dflt is not set, we are calling bnxt_probe_phy() after the firmware has reset. There is no need to query the current PHY settings from firmware as these settings may be different from the ethtool settings that the driver will re-establish later. So return earlier in bnxt_probe_phy() to save one firmware call. Signed-off-by:
-
Michael Chan authored
In bnxt_update_phy_setting(), ethtool_get_link_ksettings() and bnxt_disable_an_for_lpbk(), we inconsistently use netif_carrier_ok() to determine link. Instead, we should use bp->link_info.link_up which has the true link state. The netif_carrier state may be off during self-test and while the device is being reset and may not always reflect the true link state. By always using bp->link_info.link_up, the code is now more consistent and more correct. Some unnecessary link toggles are now prevented with this patch. Signed-off-by:
-
David S. Miller authored
Michal Kubecek says: ==================== ethtool netlink interface, part 2 This shorter series adds support for getting and setting of wake-on-lan settings and message mask (originally message level). Together with the code already in net-next, this will allow full implementation of "ethtool <dev>" and "ethtool -s <dev> ...". Older versions of the ethtool netlink series allowed getting WoL settings by unprivileged users and only filtered out the password but this was a source of controversy so for now, ETHTOOL_MSG_WOL_GET request always requires CAP_NET_ADMIN as ETHTOOL_GWOL ioctl request does. ==================== Signed-off-by: -
Michal Kubecek authored
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of a device are modified using ETHTOOL_MSG_WOL_SET netlink message or ETHTOOL_SWOL ioctl request. As notifications can be received by anyone, do not include SecureOn(tm) password in notification messages. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Michal Kubecek authored
Implement WOL_SET netlink request to set wake-on-lan settings. This is equivalent to ETHTOOL_SWOL ioctl request. Signed-off-by:
-
Michal Kubecek authored
Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Michal Kubecek authored
Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message or ETHTOOL_SMSGLVL ioctl request. The notification message has the same format as reply to DEBUG_GET request. As with other ethtool notifications, netlink requests only trigger the notification if the mask is actually changed while ioctl request trigger it whenever the request results in calling the ethtool_ops handler. Signed-off-by:
-
Michal Kubecek authored
Implement DEBUG_SET netlink request to set debugging settings for a device. At the moment, only message mask corresponding to message level as set by ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) Signed-off-by:
-
Michal Kubecek authored
Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by:
-
Michal Kubecek authored
Fix missing or incorrect function argument and struct member descriptions. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2020-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.6 Second set of patches for v5.6. Nothing special standing out, smaller new features and fixes allover. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device iwlwifi * support new versions of the FTM FW APIs * support new version of the beacon template FW API * print some extra information when the driver is loaded rtw88 * support wowlan feature for 8822c * add support for WIPHY_WOWLAN_NET_DETECT brcmfmac * add initial support for monitor mode qtnfmac * add module parameter to enable DFS offloading in firmware * add support for STA HE rates * add support for TWT responder and spatial reuse ==================== Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-01-26 Here's (probably) the last bluetooth-next pull request for the 5.6 kernel. - Initial pieces of Bluetooth 5.2 Isochronous Channels support - mgmt: Various cleanups and a new Set Blocked Keys command - btusb: Added support for 04ca:3021 QCA_ROME device - hci_qca: Multiple fixes & cleanups - hci_bcm: Fixes & improved device tree support - Fixed attempts to create duplicate debugfs entries Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Christophe JAILLET authored
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here looks reversed. Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep the correct semantic. In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8. Fixes: 107dec27 ("drivers: net: xgene: Add support for multiple queues") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Heiner Kallweit authored
Defaults for min_mtu and max_mtu are set by ether_setup(), which is called from devm_alloc_etherdev(). Let rtl_jumbo_max() only return a positive value if actually jumbo packets are supported. This also allows to remove constant Jumbo_1K which is a little misleading anyway. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47c ("mlxsw: minimal: Add ethtool support") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Vladimir Oltean authored
DSA sets up a switch tree little by little. Every switch of the N members of the tree calls dsa_register_switch, and (N - 1) will just touch the dst->ports list with their ports and quickly exit. Only the last switch that calls dsa_register_switch will find all DSA links complete in dsa_tree_setup_routing_table, and not return zero as a result but instead go ahead and set up the entire DSA switch tree (practically on behalf of the other switches too). The trouble is that the (N - 1) switches don't clean up after themselves after they get an error such as EPROBE_DEFER. Their footprint left in dst->ports by dsa_switch_touch_ports is still there. And switch N, the one responsible with actually setting up the tree, is going to work with those stale dp, dp->ds and dp->ds->dev pointers. In particular ds and ds->dev might get freed by the device driver. Be there a 2-switch tree and the following calling order: - Switch 1 calls dsa_register_switch - Calls dsa_switch_touch_ports, populates dst->ports - Calls dsa_port_parse_cpu, gets -EPROBE_DEFER, exits. - Switch 2 calls dsa_register_switch - Calls dsa_switch_touch_ports, populates dst->ports - Probe doesn't get deferred, so it goes ahead. - Calls dsa_tree_setup_routing_table, which returns "complete == true" due to Switch 1 having called dsa_switch_touch_ports before. - Because the DSA links are complete, it calls dsa_tree_setup_switches now. - dsa_tree_setup_switches iterates through dst->ports, initializing the Switch 1 ds structure (invalid) and the Switch 2 ds structure (valid). - Undefined behavior (use after free, sometimes NULL pointers, etc). Real example below (debugging prints added by me, as well as guards against NULL pointers): [ 5.477947] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.313002] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.319932] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.329693] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.339458] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.349226] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.358991] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.368758] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.378524] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.388291] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.398057] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.407912] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.417682] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.427446] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.437212] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.446979] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.456744] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.466512] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.476277] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.486043] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.495810] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.505577] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.515433] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.354120] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.361045] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.370805] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.380571] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.390337] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.400104] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.409872] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.419637] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.429403] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.439169] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803db15b80 (dev ffffff803d8e4800) The solution is to recognize that the functions that call dsa_switch_touch_ports (dsa_switch_parse_of, dsa_switch_parse) have side effects, and therefore one should clean up their side effects on error path. The cleanup of dst->ports was taken from dsa_switch_remove and moved into a dedicated dsa_switch_release_ports function, which should really be per-switch (free only the members of dst->ports that are also members of ds, instead of all switch ports). Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Heiner Kallweit authored
All usage of this function was removed three years ago, and the function was marked as deprecated: a52ad514 ("net: deprecate eth_change_mtu, remove usage") So I think we can remove it now. Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== XDP fixes for socionext driver Fix possible user-after-in XDP rx path Fix rx statistics accounting if no bpf program is attached ==================== Signed-off-by: -
Lorenzo Bianconi authored
Fix xdp_result initialization in netsec_process_rx in order to not increase rx counters if there is no bpf program attached to the xdp hook and napi_gro_receive returns GRO_DROP Fixes: ba2b2321 ("net: netsec: add XDP support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Lorenzo Bianconi authored
Fix possible use-after-free in in netsec_process_rx that can occurs if the first packet is sent to the normal networking stack and the following one is dropped by the bpf program attached to the xdp hook. Fix the issue defining the skb pointer in the 'budget' loop Fixes: ba2b2321 ("net: netsec: add XDP support") Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: allow per-net notifier to follow netdev into namespace Currently we have per-net notifier, which allows to get only notifications relevant to particular network namespace. That is enough for drivers that have netdevs local in a particular namespace (cannot move elsewhere). However if netdev can change namespace, per-net notifier cannot be used. Introduce dev_net variant that is basically per-net notifier with an extension that re-registers the per-net notifier upon netdev namespace change. Basically the per-net notifier follows the netdev into namespace. ==================== Signed-off-by: -
Jiri Pirko authored
Register the dev_net notifier and allow the per-net notifier to follow the device into different namespace. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Introduce dev_net variants of netdev notifier register/unregister functions and allow per-net notifier to follow the netdevice into the namespace it is moved to. Signed-off-by:
-
Jiri Pirko authored
Push the code which is done under rtnl lock in net notifier register and unregister function into separate helpers. Signed-off-by:
-
Jiri Pirko authored
The function does the same thing as the existing code, so rather call call_netdevice_unregister_net_notifiers() instead of code duplication. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Kuniyuki Iwashima authored
reuseport_grow() does not need to initialize the more_reuse->max_socks again. It is already initialized in __reuseport_alloc(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
David S. Miller authored
Steffen Klassert says: ==================== Support fraglist GRO/GSO This patchset adds support to do GRO/GSO by chaining packets of the same flow at the SKB frag_list pointer. This avoids the overhead to merge payloads into one big packet, and on the other end, if GSO is needed it avoids the overhead of splitting the big packet back to the native form. Patch 1 adds netdev feature flags to enable fraglist GRO, this implements one of the configuration options discussed at netconf 2019. Patch 2 adds a netdev software feature set that defaults to off and assigns the new fraglist GRO feature flag to it. Patch 3 adds the core infrastructure to do fraglist GRO/GSO. Patch 4 enables UDP to use fraglist GRO/GSO if configured. I have only meaningful forwarding performance measurements. I did some tests for the local receive path with netperf and iperf, but in this case the sender that generates the packets is the bottleneck. So the benchmarks are not that meaningful for the receive path. Paolo Abeni did some benchmarks of the local receive path for the RFC v2 version of this pachset, results can be found here: https://www.spinics.net/lists/netdev/msg551158.html I used my IPsec forwarding test setup for the performance measurements: ------------ ------------ -->| router 1 |-------->| router 2 |-- | ------------ ------------ | | | | -------------------- | --------|Spirent Testcenter|<---------- -------------------- net-next (September 7th 2019): Single stream UDP frame size 1460 Bytes: 1.161.000 fps (13.5 Gbps). ---------------------------------------------------------------------- net-next (September 7th 2019) + standard UDP GRO/GSO (not implemented in this patchset): Single stream UDP frame size 1460 Bytes: 1.801.000 fps (21 Gbps). ---------------------------------------------------------------------- net-next (September 7th 2019) + fraglist UDP GRO/GSO: Single stream UDP frame size 1460 Bytes: 2.860.000 fps (33.4 Gbps). ======================================================================= net-next (January 23th 2020): Single stream UDP frame size 1460 Bytes: 919.000 fps (10.73 Gbps). ---------------------------------------------------------------------- net-next (January 23th 2020) + fraglist UDP GRO/GSO: Single stream UDP frame size 1460 Bytes: 2.430.000 fps (28.38 Gbps). ----------------------------------------------------------------------- Changes from RFC v1: - Add IPv6 support. - Split patchset to enable UDP GRO by default before adding fraglist GRO support. - Mark fraglist GRO packets as CHECKSUM_NONE. - Take a refcount on the first segment skb when doing fraglist segmentation. With this we can use the same error handling path as with standard segmentation. Changes from RFC v2: - Add a netdev feature flag to configure listifyed GRO. - Fix UDP GRO enabling for IPv6. - Fix a rcu_read_lock() imbalance. - Fix error path in skb_segment_list(). Changes from RFC v3: - Rename NETIF_F_GRO_LIST to NETIF_F_GRO_FRAGLIST and add NETIF_F_GSO_FRAGLIST. - Move introduction of SKB_GSO_FRAGLIST to patch 2. - Use udpv6_encap_needed_key instead of udp_encap_needed_key in IPv6. - Move some missplaced code from patch 5 to patch 1 where it belongs to. Changes from RFC v4: - Drop the 'UDP: enable GRO by default' patch for now. Standard UDP GRO is not changed with this patchset. - Rebase to net-next current. Changes fom v1 (December 18th): - Do a full __copy_skb_header instead of tryng to find the really needed subset header fields. Thisa can be done later. - Mark all fraglist GRO packets with CHECKSUM_UNNECESSARY. - Rebase to net-next current. Changes fom v2 (January 24th): - Do the CHECKSUM_UNNECESSARY setting from IPv4 for IPv6 too. ==================== Signed-off-by:
-
Steffen Klassert authored
This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Steffen Klassert authored
This patch adds the core functions to chain/unchain GSO skbs at the frag_list pointer. This also adds a new GSO type SKB_GSO_FRAGLIST and a is_flist flag to napi_gro_cb which indicates that this flow will be GROed by fraglist chaining. Signed-off-by:
-
Steffen Klassert authored
The previous patch added the NETIF_F_GRO_FRAGLIST feature. This is a software feature that should default to off. Current software features default to on, so add a new feature set that defaults to off. Signed-off-by:
-
