- 20 Aug, 2018 9 commits
-
-
Wolfram Sang authored
Use BIT macro to avoid shift-31-problem, indent a little more and use GENMASK to make it easier to add new flags. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Hans de Goede authored
Currently acpi_gsb_i2c_read_bytes() directly returns i2c_transfer's return value. i2c_transfer returns a value < 0 on error and 2 (for 2 successfully executed transfers) on success. But the ACPI code expects 0 on success, so currently acpi_gsb_i2c_read_bytes()'s caller does: if (status > 0) status = 0; This commit makes acpi_gsb_i2c_read_bytes() return a value which can be directly consumed by the ACPI code, mirroring acpi_gsb_i2c_write_bytes(), this commit also makes acpi_gsb_i2c_read_bytes() explitcly check that i2c_transfer returns 2, rather then accepting any value > 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Hans de Goede authored
acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which is the number of transfers executed on success, so 1. The ACPI code expects us to store 0 in gsb->status for success, not 1. Specifically this breaks the following code in the Thinkpad 8 DSDT: ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */ If ((ECST == Zero)) { ECRD = I2CR /* \_SB_.I2C1.I2CR */ } Before this commit we set ECST to 1, causing the read to never happen breaking battery monitoring on the Thinkpad 8. This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer() returns 1, so the single write transfer completed successfully, and makes it return -EIO on for other (unexpected) return values >= 0. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabrizio Castro authored
Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabrizio Castro authored
Document RZ/G2M (R8A774A1) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Esben Haabendal authored
Always update the stopped state when busy status have been checked. This is identical to what was done before, with the exception of error handling. Without this change, some errors cause the stopped state to be left in incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and i2c_imx_xfer(). Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Esben Haabendal authored
This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
Darren Stevens authored
The pasemi smbus controller uses PCI_FUNC(dev->devfn) to define which number bus to attach to, however this fails when something else is probed first, for example an ATI Radeon graphics card will claim 9 or 10 busses, including the ones the pasemi wants. Patch the driver to call i2c_add_adapter rather than i2c_add_numbered_adapter. Signed-off-by: Darren Stevens <darren@stevens-zone.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Andy Shevchenko authored
Replace short statement in comment with proper SPDX license tag. Note, for i2c-desingware-slave.c the identifier is chosen in accordance with MODULE_LICENSE() macro since it is visible to user. Another point to this choice is that the header seems to be copy'n'paste from the other file of this very driver. Acked-by: Luis Oliveira <Luis.Oliveira@synopsys.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 08 Aug, 2018 4 commits
-
-
Andy Shevchenko authored
Instead of using custom variables and parser, convert the driver to use the ones provided by I2C core. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Andy Shevchenko authored
There are two drivers already using the SDA hold time setting. It might be more in the future, thus, make I2C core to parse the setting for us if provided by firmware. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 04 Aug, 2018 12 commits
-
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
Some adapters do not support a message length of 0. Add this as a quirk so drivers don't have to open code it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Jae Hyun Yoo authored
This commit fixes this sparse warning: drivers/i2c/busses/i2c-aspeed.c:875:38: warning: incorrect type in assignment (different modifiers) drivers/i2c/busses/i2c-aspeed.c:875:38: expected unsigned int ( *get_clk_reg_val )( ... ) drivers/i2c/busses/i2c-aspeed.c:875:38: got void const *const data Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
https://github.com/peda-r/i2c-muxWolfram Sang authored
Simplify the probe function of the pca954x driver
-
Manivannan Sadhasivam authored
Add Actions Semiconductor Owl family S900 I2C driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Manivannan Sadhasivam authored
Add devicetree binding for Actions Semiconductor Owl I2C controller Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 31 Jul, 2018 1 commit
-
-
Karthikeyan Ramasubramanian authored
This bus driver supports the GENI based i2c hardware controller in the Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable module supporting a wide range of serial interfaces including I2C. The driver supports FIFO mode and DMA mode of transfer and switches modes dynamically depending on the size of the transfer. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> [wsa: squashed the MAINTAINER addition and a RPM fix by Evan Green] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 30 Jul, 2018 1 commit
-
-
Linus Walleij authored
This creates a struct device *dev helper variable in probe() which IMO makes the code less cluttered and easier to read. Also rename the of_node veriable to the common shortform "np" (node pointer). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [peda: slightly edited commit message and removed some surplus newlines] Signed-off-by: Peter Rosin <peda@axentia.se>
-
- 29 Jul, 2018 1 commit
-
-
Wolfram Sang authored
Merge tag 'at24-4.19-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.19 at24: updates for v4.19 New property: 'address-width' which allows to specify the number of addressing bits. Up until now we only could choose one of the defined models and rely on the flags specified in its corresponding chip data structure.
-
- 25 Jul, 2018 2 commits
-
-
Alan Chiang authored
Provide a flexible way to determine the addressing bits of eeprom. Pass the addressing bits to driver through address-width property. Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-
Alan Chiang authored
Currently the only way to use a variant of a supported model with a different address width is to define a new compatible string and the corresponding chip data structure. Provide a flexible way to specify the size of the address pointer by defining a new property: address-width. Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> [Bartosz: fixed the commit message] Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-
- 23 Jul, 2018 1 commit
-
-
Wolfram Sang authored
On Gen3, we can only do RXDMA once per transfer reliably. For that, we must reset the device, then we can have RXDMA once. This patch implements this. When there is no reset controller or the reset fails, RXDMA will be blocked completely. Otherwise, it will be disabled after the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu Yamasaki, yet completely refactored to handle multiple read messages within one transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 22 Jul, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/nvmeLinus Torvalds authored
Pull NVMe fixes from Christoph Hellwig: - fix a regression in 4.18 that causes a memory leak on probe failure (Keith Bush) - fix a deadlock in the passthrough ioctl code (Scott Bauer) - don't enable AENs if not supported (Weiping Zhang) - fix an old regression in metadata handling in the passthrough ioctl code (Roland Dreier) * tag 'nvme-for-4.18' of git://git.infradead.org/nvme: nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD nvme: don't enable AEN if not supported nvme: ensure forward progress during Admin passthru nvme-pci: fix memory leak on probe failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Fix several places that screw up cleanups after failures halfway through opening a file (one open-coding filp_clone_open() and getting it wrong, two misusing alloc_file()). That part is -stable fodder from the 'work.open' branch. And Christoph's regression fix for uapi breakage in aio series; include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel definition of sigset_t, the reason for doing so in the first place had been bogus - there's no need to expose struct __aio_sigset in aio_abi.h at all" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: don't expose __aio_sigset in uapi ocxlflash_getfile(): fix double-iput() on alloc_file() failures cxl_getfile(): fix double-iput() on alloc_file() failures drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
-
Al Viro authored
kernel_wait4() expects a userland address for status - it's only rusage that goes as a kernel one (and needs a copyout afterwards) [ Also, fix the prototype of kernel_wait4() to have that __user annotation - Linus ] Fixes: 92ebce5a ("osf_wait4: switch to kernel_wait4()") Cc: stable@kernel.org # v4.13+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: - Fix interrupt type on ethernet switch for i.MX-based RDU2 - GPC on i.MX exposed too large a register window which resulted in userspace being able to crash the machine. - Fixup of bad merge resolution moving GPIO DT nodes under pinctrl on droid4. * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch soc: imx: gpc: restrict register range for regmap access ARM: dts: omap4-droid4: fix dts w.r.t. pwm
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "A single fix for a MCE-polling regression, which prevented the disabling of polling" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Remove min interval polling limitation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti fixes from Ingo Molnar: "An APM fix, and a BTS hardware-tracing fix related to PTI changes" * 'x86-pti-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apm: Don't access __preempt_count with zeroed fs x86/events/intel/ds: Fix bts_interrupt_threshold alignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: a stop-machine preemption fix and a SCHED_DEADLINE fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix switched_from_dl() warning stop_machine: Disable preemption when waking two stopper threads
-
- 21 Jul, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core kernel fixes from Ingo Molnar: "This is mostly the copy_to_user_mcsafe() related fixes from Dan Williams, and an ORC fix for Clang" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe() lib/iov_iter: Document _copy_to_iter_flushcache() lib/iov_iter: Document _copy_to_iter_mcsafe() objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang
-