- 13 Feb, 2021 25 commits
-
-
David S. Miller authored
Fixes: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: some more cleanup Version 3 of this series uses dev_err_probe() in the second patch, as suggested by Heiner Kallweit. Version 2 was sent to ensure the series was based on current net-next/master, and added copyright updates to files touched. The original introduction is below. This is another fairly innocuous set of cleanup patches. The first was motivated by a bug found that would affect IPA v4.5. It maintain a new GSI address pointer; one is the "raw" (original mapped) address, and the other will have been adjusted if necessary for use on newer platforms. The second just quiets some unnecessary noise during early probe. The third fixes some errors that show up when IPA_VALIDATION is enabled. The last two just create helper functions to improve readability. ==================== Signed-off-by: -
Alex Elder authored
Create a simple helper function that indicates whether a channel has been initialized. This abstacts/hides the details of how this is determined. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Introduce a new function to abstract the knowledge of whether hashed routing and filter tables are supported for a given IPA instance. IPA v4.2 is the only one that doesn't support hashed tables (now and for the foreseeable future), but the name of the helper function is better for explaining what's going on. Signed-off-by:
-
Alex Elder authored
In ipa_cmd_register_write_valid() we verify that values we will supply to a REGISTER_WRITE IPA immediate command will fit in the fields that need to hold them. This patch fixes some issues in that function and ipa_cmd_register_write_offset_valid(). The dev_err() call in ipa_cmd_register_write_offset_valid() has some printf format errors: - The name of the register (corresponding to the string format specifier) was not supplied. - The IPA base offset and offset need to be supplied separately to match the other format specifiers. Also make the ~0 constant used there to compute the maximum supported offset value explicitly unsigned. There are two other issues in ipa_cmd_register_write_valid(): - There's no need to check the hash flush register for platforms (like IPA v4.2) that do not support hashed tables - The highest possible endpoint number, whose status register offset is computed, is COUNT - 1, not COUNT. Fix these problems, and add some additional commentary. Signed-off-by: -
Alex Elder authored
When initializing the IPA core clock and interconnects, it's possible we'll get an EPROBE_DEFER error. This isn't really an error, it's just means we need to be re-probed later. Use dev_err_probe() to report the error rather than dev_err(). This avoids polluting the log with these "error" messages. Signed-off-by:
-
Alex Elder authored
This patch actually fixes a bug, though it doesn't affect the two platforms supported currently. The fix implements GSI memory pointers a bit differently. For IPA version 4.5 and above, the address space for almost all GSI registers is adjusted downward by a fixed amount. This is currently handled by adjusting the I/O virtual address pointer after it has been mapped. The bug is that the pointer is not "de-adjusted" as it should be when it's unmapped. This patch fixes that error, but it does so by maintaining one "raw" pointer for the mapped memory range. This is assigned when the memory is mapped and used to unmap the memory. This pointer is also used to access the two registers that do *not* sit in the "adjusted" memory space. Rather than adjusting *that* pointer, we maintain a separate pointer that's an adjusted copy of the "raw" pointer, and that is used for most GSI register accesses. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-net-next-2021-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Last set of updates: * more minstrel work from Felix to reduce the probing overhead * QoS for nl80211 control port frames * STBC injection support * and a couple of small fixes ==================== Signed-off-by:
-
Gustavo A. R. Silva authored
Code at line 967 implies that rsp->fwdata.supported_fec may be up to 4: 967: if (rsp->fwdata.supported_fec <= FEC_MAX_INDEX) If rsp->fwdata.supported_fec evaluates to 4, then there is an out-of-bounds read at line 971 because fec is an array with a maximum of 4 elements: 954 const int fec[] = { 955 ETHTOOL_FEC_OFF, 956 ETHTOOL_FEC_BASER, 957 ETHTOOL_FEC_RS, 958 ETHTOOL_FEC_BASER | ETHTOOL_FEC_RS}; 959 #define FEC_MAX_INDEX 4 971: fecparam->fec = fec[rsp->fwdata.supported_fec]; Fix this by properly indexing fec[] with rsp->fwdata.supported_fec - 1. In this case the proper indexes 0 to 3 are used when rsp->fwdata.supported_fec evaluates to a range of 1 to 4, correspondingly. Fixes: d0cf9503 ("octeontx2-pf: ethtool fec mode support") Addresses-Coverity-ID: 1501722 ("Out-of-bounds read") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the text in array rpm_rx_stats_fields, fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2021-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 Second set of patches for v5.12. Last time there was a smaller pull request so unsurprisingly this time we have a big one. mt76 has new hardware support and lots of new features, iwlwifi getting new features and rtw88 got NAPI support. And the usual cleanups and fixes all over. Major changes: ath10k * support setting SAR limits via nl80211 rtw88 * support 8821 RFE type2 devices * NAPI support iwlwifi * add new FW API support * support for new So devices * support for RF interference mitigation (RFI) * support for PNVM (Platform Non-Volatile Memory, a firmware data file) from BIOS mt76 * add new mt7921e driver * 802.11 encap offload support * support for multiple pcie gen1 host interfaces on 7915 * 7915 testmode support * 7915 txbf support brcmfmac * support for CQM RSSI notifications wil6210 * support for extended DMG MCS 12.1 rate ==================== Signed-off-by:
-
Vadim Fedorenko authored
As udp_port_cfg struct changes its members with dependency on IPv6 configuration, the code in rxrpc should also check for IPv6. Fixes: 1a9b86c9 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Add genl events for connection info This series from the MPTCP tree adds genl multicast events that are important for implementing a userspace path manager. In MPTCP, a path manager is responsible for adding or removing additional subflows on each MPTCP connection. The in-kernel path manager (already part of the kernel) is a better fit for many server use cases, but the additional flexibility of userspace path managers is often useful for client devices. Patches 1, 2, 4, 5, and 6 do some refactoring to streamline the netlink event implementation in the final patch. Patch 3 improves the timeliness of subflow destruction to ensure the 'subflow closed' event will be sent soon enough. Patch 7 allows use of the GENL_UNS_ADMIN_PERM flag on genl mcast groups to mandate CAP_NET_ADMIN, which is important to protect token information in the MPTCP events. This is a genetlink change. Patch 8 adds the MPTCP netlink events. ==================== Signed-off-by: -
Florian Westphal authored
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events. This implementation reuses the same event API as the mptcp kernel fork to ease integration of existing tools, e.g. mptcpd. Supported events include: 1. start and close of an mptcp connection 2. start and close of subflows (joins) 3. announce and withdrawals of addresses 4. subflow priority (backup/non-backup) change. Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
Once event support is added this may need to allocate memory while msk lock is held with softirqs disabled. Not using lock_fast also allows to do the allocation with GFP_KERNEL. Signed-off-by:
-
Florian Westphal authored
Pass the first/initial subflow to the existing functions so they can pass this on to the notification handler that is added later in the series. Signed-off-by:
-
Florian Westphal authored
In case mptcp socket is already dead the entire mptcp socket will be freed. We can avoid the close check in this case. Signed-off-by:
-
Florian Westphal authored
When remote side closes a subflow we should schedule the worker to dispose of the subflow in a timely manner. Otherwise, SF_CLOSED event won't be generated until the mptcp socket itself is closing or local side is closing another subflow. Signed-off-by:
-
Florian Westphal authored
Prepare for subflow close events: When mptcp connection is torn down its enough to send the mptcp socket close notification rather than a subflow close event for all of the subflows followed by the mptcp close event. This splits the helper: mptcp_close_ssk() will emit the close notification, __mptcp_close_ssk will not. Signed-off-by:
-
Florian Westphal authored
Allows to make some functions static and avoids acquire of the pm spinlock in protocol.c. Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Selftest enhancement and fixes This is a collection of selftest updates from the MPTCP tree. Patch 1 uses additional 'ss' command line parameters and 'nstat' to improve output when certain MPTCP tests fail. Patches 2 & 3 fix a copy/paste error and some output formatting. Patch 4 makes sure tests still pass if certain connection-related packets are retransmitted. ==================== Signed-off-by: -
Matthieu Baerts authored
If we receive less MPCapable SYN or 3rd ACK than expected, we now mark the test as failed. On the other hand, if we receive more, we keep the warning but we add a hint that it is probably due to retransmissions and that's why we don't mark the test as failed. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/148Signed-off-by:
-
Matthieu Baerts authored
Before we had this in case of SYN retransmissions: (...) # ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ] # ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP ns2-60143c00-cDZWo4 SYNRX: MPTCP -> MPTCP: expect 11, got # 13 # (duration 6221ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ] # ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ] (...) Now we have: (...) # ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ] # ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP (duration 6221ms) [ OK ] WARN: SYNRX: expect 11, got 13 # ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ] # ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ] (...) So we put everything on one line, keep the durations and "OK" aligned and removed duplicated info to short the warning. Signed-off-by:
-
Matthieu Baerts authored
Info from received MPCapable SYN were printed instead of the ones from received MPCapable 3rd ACK. Fixes: fed61c4b ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Signed-off-by:
-
Paolo Abeni authored
Even if that may sound completely unlikely, the mptcp implementation is not perfect, yet. When the self-tests report an error we usually need more information of what the scripts currently report. iproute allow provides some additional goodies since a few releases, let's dump them. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
- 12 Feb, 2021 15 commits
-
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: some cleanups for -next To improve code readability and maintainability, the series refactor out some bloated functions in the HNS3 ethernet driver. change log: V2: remove an unused variable in #5 previous version: V1: https://patchwork.kernel.org/project/netdevbpf/cover/1612943005-59416-1-git-send-email-tanhuazhong@huawei.com/ ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org>
-
Hao Chen authored
hclge_rm_vport_all_mac_table() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
To make it more readable and maintainable, split hclgevf_set_rss_tuple() into two parts. Signed-off-by:
-
Huazhong Tan authored
To make it more readable and maintainable, split hclge_set_rss_tuple() into two parts. Signed-off-by:
-
Yufeng Mo authored
hclgevf_cmd_send() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
hclge_cmd_send() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
-
Jian Shen authored
hclge_dbg_dump_qos_buf_cfg() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
To improve code readability and maintainability, separate the flow type parsing part and the converting part from bloated hclgevf_get_rss_tuple(). Signed-off-by:
-
Jian Shen authored
To improve code readability and maintainability, separate the flow type parsing part and the converting part from bloated hclge_get_rss_tuple(). Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, separate the command handling part and the status parsing part from bloated hclge_set_vf_vlan_common(). Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jiaran Zhang authored
Use common ipv6_addr_any() to determine if an addr is ipv6 any addr. Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
-
Peng Li authored
As more commands are added, hns3_dbg_cmd_write() is going to get more bloated, so move the part about command check into a separate function. Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, refactor hclgevf_cmd_convert_err_code() with an array of imp_errcode and common_errno mapping, instead of a bloated switch/case. Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, refactor hclge_cmd_convert_err_code() with an array of imp_errcode and common_errno mapping, instead of a bloated switch/case. Signed-off-by:
-
Johannes Berg authored
These were missed earlier, add the necessary documentation and, while at it, clarify it. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210212105023.895c3389f063.I46dea3bfc64385bc6f600c50d294007510994f8f@changeidSigned-off-by:
-
