- 21 Sep, 2020 2 commits
-
-
Dan Murphy authored
tas2770_reset is called during i2c probe. The reset calls the snd_soc_component_write which depends on the tas2770->component being available. The component pointer is not set until codec_probe so move the reset to the codec_probe after the pointer is set. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Shuming Fan authored
To avoid the IO error, we need to cancel the delayed work and wait for it to finish. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200921094244.31869-1-shumingf@realtek.comSigned-off-by:
-
- 17 Sep, 2020 5 commits
-
-
Dan Murphy authored
Fix the BCLK inversion for DSP modes This is how it is defined by ASoC: * BCLK: * - "normal" polarity means signal is available at rising edge of BCLK * - "inverted" polarity means signal is available at falling edge of BCLK The adcx140 defines the BCLK edge based on coding type. The PCM (DSP_A/B) should drive on rising and sample on falling edge, so from ASoC pov, it is IB_NF. But from the codec pov if it is configured in DSP mode, then the BCLK should not be inverted, defaults to the coding standard. For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising). >From the codec's pov BCLK should not invert either, as this is the default for the coding. So, inversion must take the format into account: IB_NF + DSP_A/B == the codec bclk inversion should be disabled NB_NF + DSP_A/B == the codec bclk inversion should be enabled NB_NF + I2S == the codec bclk inversion should be disabled Signed-off-by:
-
Dan Murphy authored
It was observed that if the device was active and register writes were performed there were some unwanted behaviors particularly when writing the word length and some filter options. So when writing to the device the device should be placed in sleep mode and then exit sleep mode once the register update is complete. Signed-off-by:
-
Camel Guo authored
According to its datasheet, the digital gain should be -100 dB when CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255 and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug. Fixes: 689c7655 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by:
Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.comSigned-off-by:
-
Pierre-Louis Bossart authored
When CONFIG_SND_CTL_VALIDATION is set, accesses to extended bytes control generate spurious error messages when the size exceeds 512 bytes, such as [ 11.224223] sof_sdw sof_sdw: control 2:0:0:EQIIR5.0 eqiir_coef_5:0: invalid count 1024 In addition the error check returns -EINVAL which has the nasty side effect of preventing applications accessing controls from working, e.g. root@plb:~# alsamixer cannot load mixer controls: Invalid argument It's agreed that the control interface has been abused since 2014, but forcing a check should not prevent existing solutions from working. This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION is set and the byte array provided by topology is > 512. This preserves the checks for all other cases. Fixes: 1a3232d2 ('ASoC: topology: Add support for TLV bytes controls') BugLink: https://github.com/thesofproject/linux/issues/2430Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917103912.2565907-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Viorel Suman authored
"alsactl -f state.conf store/restore" sequence fails because setting "mixing clock source" and "output source" requires active TDM clock being started for configuration propagation. Make these two controls write only so that their values are not stored at "alsactl store". Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1600104274-13110-1-git-send-email-viorel.suman@oss.nxp.comSigned-off-by:
-
- 14 Sep, 2020 2 commits
-
-
derek.fang authored
Fix the failure to flush DAC data before playback. Signed-off-by:
derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1600073839-6762-2-git-send-email-derek.fang@realtek.comSigned-off-by:
-
derek.fang authored
Fix the DC calibration unsuccessful issue on rt1015 bypass boost mode. Signed-off-by:
-
- 08 Sep, 2020 1 commit
-
-
Camel Guo authored
According to its datasheet, after reset this codec goes into sleep mode. In this mode, any register accessing should be avoided except for exiting sleep mode. Hence this commit moves SLEEP_CFG access before any register accessing. Signed-off-by:
-
- 07 Sep, 2020 1 commit
-
-
Cezary Rojewski authored
Introduce for_each_rtd_dais_rollback macro which behaves exactly like for_each_codec_dais_rollback and its cpu_dais equivalent but for all dais instead. Use newly added macro to fix soc_pcm_open error path and prevent uninitialized dais from being cleaned-up. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Fixes: 5d9fa03e ("ASoC: soc-pcm: tidyup soc_pcm_open() order") Acked-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.comSigned-off-by:
-
- 02 Sep, 2020 1 commit
-
-
Hans de Goede authored
The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
- 01 Sep, 2020 4 commits
-
-
Cezary Rojewski authored
While addressing existing power-cycle limitations for sound/soc/intel/haswell solution, change brings regression for standard audio userspace flows e.g.: when using PulseAudio. Occasional sound-card initialization fail is still better than permanent audio distortions, so revert the change. Fixes: 8ec7d604 ("ASoC: Intel: haswell: Power transition refactor") Reported-by:
Christian Bundy <christianbundy@fraction.io> Signed-off-by:
-
Camel Guo authored
In adcx140_i2c_probe, adcx140->dev is accessed before its initialization. This commit fixes this bug. Fixes: 689c7655 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Acked-by:
Camel Guo <camel.guo@axis.com> Link: https://lore.kernel.org/r/20200901135736.32036-1-camel.guo@axis.comSigned-off-by:
-
Sylwester Nawrocki authored
When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" Signed-off-by:
-
- 28 Aug, 2020 2 commits
-
-
Jerome Brunet authored
On g12 and following platforms, The first channel of record with more than 2 channels ends being placed randomly on an even channel of the output. On these SoCs, a bit was added to force the first channel to be placed at the beginning of the output. Apparently the behavior if the bit is not set is not easily predictable. According to the documentation, this bit is not present on the axg series. Set the bit on g12 and fix the problem. Fixes: a3c23a8a ("ASoC: meson: axg-toddr: add g12a support") Reported-by:
Nicolas Belin <nbelin@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200828151438.350974-1-jbrunet@baylibre.comSigned-off-by:
-
Kuninori Morimoto authored
commit 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") added snd_soc_dai_link_set_capabilities(). But it is using snd_soc_find_dai() (A) which is required client_mutex (B). And client_mutex is soc-core.c local. struct snd_soc_dai *snd_soc_find_dai(xxx) { ... (B) lockdep_assert_held(&client_mutex); ... } void snd_soc_dai_link_set_capabilities(xxx) { ... for_each_pcm_streams(direction) { ... for_each_link_cpus(dai_link, i, cpu) { (A) dai = snd_soc_find_dai(cpu); ... } ... for_each_link_codecs(dai_link, i, codec) { (A) dai = snd_soc_find_dai(codec); ... } } ... } Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP. WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100 CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : snd_soc_find_dai+0xf8/0x100 lr : snd_soc_find_dai+0xf4/0x100 ... Call trace: snd_soc_find_dai+0xf8/0x100 snd_soc_dai_link_set_capabilities+0xa0/0x16c graph_dai_link_of_dpcm+0x390/0x3c0 graph_for_each_link+0x134/0x200 graph_probe+0x144/0x230 platform_drv_probe+0x5c/0xb0 really_probe+0xe4/0x430 driver_probe_device+0x60/0xf4 snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with mutex lock, and (Y) Card driver without mutex lock. This snd_soc_dai_link_set_capabilities() is for Card driver, this means called without mutex. This patch adds snd_soc_find_dai_with_mutex() to solve it. Fixes: 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") Signed-off-by:
-
- 26 Aug, 2020 7 commits
-
-
Mark Brown authored
Merge series "ASoC: Fix return check for devm_regmap_init_sdw()" from Vinod Koul <vkoul@kernel.org>: This series attempts to fix return check for devm_regmap_init_sdw() Changes in v2: - Add missing patch for rt711 - Add patch for rt700 Vinod Koul (5): ASoC: max98373: Fix return check for devm_regmap_init_sdw() ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw() ASoC: rt711: Fix return check for devm_regmap_init_sdw() ASoC: rt715: Fix return check for devm_regmap_init_sdw() ASoC: rt700: Fix return check for devm_regmap_init_sdw() sound/soc/codecs/max98373-sdw.c | 4 ++-- sound/soc/codecs/rt1308-sdw.c | 4 ++-- sound/soc/codecs/rt700-sdw.c | 4 ++-- sound/soc/codecs/rt711-sdw.c | 4 ++-- sound/soc/codecs/rt715-sdw.c | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) -- 2.26.2
-
Dinghao Liu authored
for_each_child_of_node returns a node pointer np with refcount incremented. So when devm_kzalloc fails, a pairing refcount decrement is needed to keep np's refcount balanced. Fixes: 16395cee ("ASoC: qcom: common: Fix NULL pointer in of parser") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200820042828.10308-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Vinod Koul authored
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
-
Vinod Koul authored
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by:
-
Vinod Koul authored
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by:
-
Vinod Koul authored
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by:
-
Vinod Koul authored
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by:
-
- 25 Aug, 2020 3 commits
-
-
Kuninori Morimoto authored
commit 059374fe ("ASoC: ti: merge .digital_mute() into .mute_stream()") merged .digital_mute() into .mute_stream(). But it didn't rename ams_delta_digital_mute() to ams_delta_mute(). This patch fixup it. Signed-off-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/87blizy5ts.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Some sound card try to set 0 Hz as reset, but it is impossible. This patch ignores it to avoid error return. Signed-off-by:
-
Mark Brown authored
Linux 5.9-rc2
-
- 24 Aug, 2020 1 commit
-
-
Rander Wang authored
When the playback & capture streams are stopped simultaneously, the SOF PCI device will remain pm_runtime active. The root-cause is a race condition with two threads reaching the trigger function at the same time. They see another stream is active so the dapm pin is not disabled, so the codec remains active as well as the parent PCI device. For max98373, the capture stream provides feedback when playback is working and it is unused when playback is stopped. So the dapm pin should be set only when playback is active. Fixes: 94d2d089 ('ASoC: Intel: Boards: tgl_max98373: add dai_trigger function') Reviewed-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
- 23 Aug, 2020 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull entry fix from Thomas Gleixner: "A single bug fix for the common entry code. The transcription of the x86 version messed up the reload of the syscall number from pt_regs after ptrace and seccomp which breaks syscall number rewriting" * tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Respect syscall number rewrites
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll fixes from Al Viro: "Fix reference counting and clean up exit paths" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_epoll_ctl(): clean the failure exits up a bit epoll: Keep a reference on files added to the check list
-
- 22 Aug, 2020 2 commits
-
-
Al Viro authored
Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Marc Zyngier authored
When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
